freebsd-src/lib/Makefile

61 lines
1.8 KiB
Makefile
Raw Normal View History

1994-05-27 06:00:24 +01:00
# @(#)Makefile 8.1 (Berkeley) 6/4/93
# $Id: Makefile,v 1.81 1998/10/01 14:49:57 jkh Exp $
# To satisfy shared library or ELF linkage when only the libraries being
# built are visible:
#
# csu must be built before all shared libaries for ELF.
# libcom_err must be built before libss.
# libcrypt must be built before libskey.
# libm must be built before libf2c, libg++ and libstdc++.
# libmd must be built before libatm, libopie and libskey.
# libmytinfo must be built before libdialog and libncurses.
# libncurses must be built before libdialog.
# libtermcap must be built before libcurses, libedit and libreadline.
#
# Otherwise, the SUBDIR list should be in alphabetical order.
SUBDIR= ${_csu} libcom_err ${_libcrypt} ${_libm} libmd libmytinfo \
libncurses libtermcap \
(this is an extract from src/share/examples/atm/README) =================================== HARP | Host ATM Research Platform =================================== HARP 3 What is this stuff? ------------------- The Advanced Networking Group (ANG) at the Minnesota Supercomputer Center, Inc. (MSCI), as part of its work on the MAGIC Gigabit Testbed, developed the Host ATM Research Platform (HARP) software, which allows IP hosts to communicate over ATM networks using standard protocols. It is intended to be a high-quality platform for IP/ATM research. HARP provides a way for IP hosts to connect to ATM networks. It supports standard methods of communication using IP over ATM. A host's standard IP software sends and receives datagrams via a HARP ATM interface. HARP provides functionality similar to (and typically replaces) vendor-provided ATM device driver software. HARP includes full source code, making it possible for researchers to experiment with different approaches to running IP over ATM. HARP is self-contained; it requires no other licenses or commercial software packages. HARP implements support for the IETF Classical IP model for using IP over ATM networks, including: o IETF ATMARP address resolution client o IETF ATMARP address resolution server o IETF SCSP/ATMARP server o UNI 3.1 and 3.0 signalling protocols o Fore Systems's SPANS signalling protocol What's supported ---------------- The following are supported by HARP 3: o ATM Host Interfaces - FORE Systems, Inc. SBA-200 and SBA-200E ATM SBus Adapters - FORE Systems, Inc. PCA-200E ATM PCI Adapters - Efficient Networks, Inc. ENI-155p ATM PCI Adapters o ATM Signalling Protocols - The ATM Forum UNI 3.1 signalling protocol - The ATM Forum UNI 3.0 signalling protocol - The ATM Forum ILMI address registration - FORE Systems's proprietary SPANS signalling protocol - Permanent Virtual Channels (PVCs) o IETF "Classical IP and ARP over ATM" model - RFC 1483, "Multiprotocol Encapsulation over ATM Adaptation Layer 5" - RFC 1577, "Classical IP and ARP over ATM" - RFC 1626, "Default IP MTU for use over ATM AAL5" - RFC 1755, "ATM Signaling Support for IP over ATM" - RFC 2225, "Classical IP and ARP over ATM" - RFC 2334, "Server Cache Synchronization Protocol (SCSP)" - Internet Draft draft-ietf-ion-scsp-atmarp-00.txt, "A Distributed ATMARP Service Using SCSP" o ATM Sockets interface - The file atm-sockets.txt contains further information What's not supported -------------------- The following major features of the above list are not currently supported: o UNI point-to-multipoint support o Driver support for Traffic Control/Quality of Service o SPANS multicast and MPP support o SPANS signalling using Efficient adapters This software was developed under the sponsorship of the Defense Advanced Research Projects Agency (DARPA). Reviewed (lightly) by: phk Submitted by: Network Computing Services, Inc.
1998-09-15 12:44:44 +01:00
${_compat} libalias libatm libbind libc ${_libc_r} libcalendar libcam \
1998-10-01 15:49:57 +01:00
libcompat libcurses libdevstat libdisk libedit libf2c libfetch \
libftpio libgnumalloc libipx libkvm libopie \
1998-09-17 04:56:23 +01:00
libpcap libresolv librpcsvc libskey libss libstand \
Remove tcl from /usr/src, according to prior agreement. BTW, tcl-8.0 *is* a port so there is nothing to be done on that side now. Approved by: jkh === To: "Jordan K. Hubbard" <jkh@time.cdrom.com> cc: Andreas Klemm <andreas@klemm.gtn.com>, current@freebsd.org Subject: Re: Make this a relese coordinator decision (was Re: ports-current/packages-current discontinued) From: David Greenman <dg@root.com> Date: Sun, 03 Aug 1997 20:23:31 -0700 >decision is, I'll respect it. Another chance to architect people's principles...I can hardly wait. Seems quite appropriate for a Sunday - I just need to get one of those collection plates (and money envelopes) so I can profit, too. :-) Tcl stays in /usr/src for now, but it needs to be kept up to date; same for perl. If Jordan doesn't have "setup" (written in tcl) ready for 3.0, then tcl will be yanked prior to the 3.0 release (and made into a port). As for the ports tree only supporting the last FreeBSD release, this seems sensible to me. The "ports" have always been a moving target between releases and the problem is only going to get worse when we expand to supporting other processor architectures. In any case, Satoshi is and always has been in charge of the ports tree and whatever he wants to do with it (within reason :-)) is his decision. Does this cover the issue completely? I admit to deleting messages in this thread with unusual fervor (people have FAR too much time on their hands!). There's a fair bit of reasoning behind the above, but since everyone is sick of arguing about this, I'll spare you the analysis. -DG David Greenman Core-team/Principal Architect, The FreeBSD Project
1998-09-05 13:25:55 +01:00
${_libtelnet} libutil ${_libvgl} libxpg4 liby libz
1994-05-27 06:00:24 +01:00
.if exists(${.CURDIR}/csu/${MACHINE_ARCH}-${OBJFORMAT})
_csu=csu/${MACHINE_ARCH}-${OBJFORMAT}
.elif exists(${.CURDIR}/csu/${MACHINE_ARCH})
_csu=csu/${MACHINE_ARCH}
.endif
.if !defined(NOLIBC_R)
_libc_r= libc_r
.endif
# Build both libraries. They have different names, so no harm,
# and this avoids having stale libscrypt.*
.if exists(${.CURDIR}/../secure) && !defined(NOSECURE) && !defined(NOCRYPT)
_libcrypt= ../secure/lib/libcrypt libcrypt
.else
_libcrypt= libcrypt
.endif
.if ${MACHINE_ARCH} == "i386"
_compat= compat
_libvgl= libvgl
.endif
.if defined(WANT_CSRG_LIBM)
_libm= libm
.else
_libm= msun
.endif
.if defined(RELEASEDIR) || !exists(${.CURDIR}/../kerberosIV) || \
defined(NOCRYPT) || !defined(MAKE_KERBEROS4)
_libtelnet= libtelnet
.endif
1994-05-27 06:00:24 +01:00
.include <bsd.subdir.mk>