1993-12-21 18:36:48 +00:00
|
|
|
# Edit this file to reflect information specific to your installation.
|
|
|
|
|
# Then run 'make makeconfig' to propagate the information to all the makefiles,
|
|
|
|
|
# Config.CHATHAM,v 3.1 1993/07/06 01:03:42 jbj Exp
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Definitions for the library:
|
|
|
|
|
#
|
|
|
|
|
# You must define one of -DXNTP_BIG_ENDIAN, -DXNTP_LITTLE_ENDIAN
|
|
|
|
|
# or -DXNTP_AUTO_ENDIAN depending on which way your machine's
|
|
|
|
|
# bytes go for the benefit of the DES routine. Most things
|
|
|
|
|
# sold by DEC, the NS32x32 and the 80386 deserve a
|
|
|
|
|
# -DXNTP_LITTLE_ENDIAN. Most of the rest of the world does
|
|
|
|
|
# it the other way. If in doubt, pick one, compile
|
|
|
|
|
# everything and run authstuff/authcert < authstuff/certdata.
|
|
|
|
|
# If everything fails, do it the other way.
|
|
|
|
|
#
|
|
|
|
|
# Under BSD, you may define -DXNTP_NETINET_ENDIAN to use
|
|
|
|
|
# netinet/in.h to determine which of -DXNTP_BIG_ENDIAN and
|
|
|
|
|
# XNTP_LITTLE_ENDIAN should be used.
|
|
|
|
|
#
|
|
|
|
|
LIBDEFS= -DWORDS_BIGENDIAN
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Library loading:
|
|
|
|
|
#
|
|
|
|
|
# If you don't want your library ranlib'ed, chose the second line
|
|
|
|
|
#
|
|
|
|
|
RANLIB= ranlib
|
|
|
|
|
#RANLIB= : # ar does the work of ranlib under System V
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Definitions for programs:
|
|
|
|
|
#
|
|
|
|
|
# If your compiler doesn't understand the declaration `signed char',
|
|
|
|
|
# add -DNO_SIGNED_CHAR_DECL. Your `char' data type had better be
|
|
|
|
|
# signed. If you don't know what the compiler knows, try it
|
|
|
|
|
# without the flag. If you get a syntax error on line 13 of
|
|
|
|
|
# ntp.h, add it. Note that `signed char' is an ANSIism. Most
|
|
|
|
|
# older, pcc-derived compilers will need this flag.
|
|
|
|
|
#
|
|
|
|
|
# If your library already has 's_char' defined, add -DS_CHAR_DEFINED.
|
|
|
|
|
#
|
|
|
|
|
# For SunOS 3.x, add -DSUN_3_3_STINKS (otherwise it will complain
|
|
|
|
|
# about broadaddr and will hang if you run without a -d flag
|
|
|
|
|
# on the command line. I actually can't believe the latter
|
|
|
|
|
# bug. If it hangs on your system with the flag defined, peruse
|
|
|
|
|
# xntpd/ntp_io.c for some rude comments about SunOS 3.5 and try it
|
|
|
|
|
# the other way). This flag affects xntpd only.
|
|
|
|
|
#
|
|
|
|
|
# For Ultrix 2.0, add -DULT_2_0_SUCKS. This OS has the same hanging
|
|
|
|
|
# bug as SunOS 3.5 (is this an original 4.2 bug?) and in addition
|
|
|
|
|
# has some strangeness concerning signal masks. Ultrix 2.3 doesn't
|
|
|
|
|
# have these problems. If you're running something in between
|
|
|
|
|
# you're on your own. This flag affects xntpd only.
|
|
|
|
|
#
|
|
|
|
|
# For SunOS 4.x, add -DDOSYNCTODR_SUCKS to include the code in ntp_util.c
|
|
|
|
|
# that sets the battery clock at the same time that it updates
|
|
|
|
|
# the driftfile. It does this by revving up the niceness, then
|
|
|
|
|
# sets the time of day to the current time of day. Ordinarily,
|
|
|
|
|
# you would need this only on non-networked machines.
|
|
|
|
|
#
|
|
|
|
|
# For some machines, settimeofday does not set the sub-second component
|
|
|
|
|
# of the time correctly. For these machines add -DSETTIMEOFDAY_BROKEN.
|
|
|
|
|
# If xntpd keeps STEPPING the clock by small amounts, then it is
|
|
|
|
|
# possible that you are suffering from this problem.
|
|
|
|
|
#
|
|
|
|
|
# There are three ways to pry loose the kernel variables tick and tickadj
|
|
|
|
|
# needed by ntp_unixclock.c. One reads kmem and and is enabled
|
|
|
|
|
# with -DREADKMEM. One uses Sun's libkvm and is enabled with
|
|
|
|
|
# -DUSELIBKVM. The last one uses builtin defaults and is enabled
|
|
|
|
|
# with -DNOKMEM. Therefore, one of -DUSELIBKVM, -DREADKMEM or
|
|
|
|
|
# -DNOKMEM must be defined. Suns and recent BSD should use
|
|
|
|
|
# -DUSELIBKVM; others should use -DREADKMEM. If -DUSELIBKVM, use
|
|
|
|
|
# the DAEMONLIBS below to get the kernel routines.
|
|
|
|
|
#
|
|
|
|
|
# If your gethostbyname() routine isn't based on the DNS resolver (and,
|
|
|
|
|
# in particular, h_errno doesn't exist) add a -DNODNS. There
|
|
|
|
|
# doesn't seem to be a good way to detect this automatically which
|
|
|
|
|
# works in all cases. This flag affects xntpres only.
|
|
|
|
|
#
|
|
|
|
|
# Adding -DLOCK_PROCESS to the compilation flags will prevent
|
|
|
|
|
# xntpd from being swapped out on systems where the plock(3) call
|
|
|
|
|
# is available.
|
|
|
|
|
#
|
|
|
|
|
# The flag -DDEBUG includes some debugging code.
|
|
|
|
|
#
|
|
|
|
|
# The flag -DREFCLOCK causes the basic reference clock support to be
|
|
|
|
|
# compiled into the daemon. If you set this you will also want
|
|
|
|
|
# to configure the particular clock drivers you want in the
|
|
|
|
|
# CLOCKDEFS= line below. This flag affects xntpd only.
|
|
|
|
|
#
|
|
|
|
|
# To change the location of the configuration file, use a
|
|
|
|
|
# -DCONFIG_FILE=\\"/local/etc/ntp.conf\\" or something similar.
|
|
|
|
|
#
|
|
|
|
|
# Under HP-UX, you must use either -Dhpux70 or -Dhpux80 as,
|
|
|
|
|
# well as -DNOKMEM
|
|
|
|
|
#
|
|
|
|
|
# If your library doesn't include the vsprintf() routine, define
|
|
|
|
|
# NEED_VSPRINTF.
|
|
|
|
|
#
|
|
|
|
|
# There are three ways to utilize external 1-pps signals. Define -DPPS to
|
|
|
|
|
# include just the pps routine, such as used by the DCF77 reference clock
|
|
|
|
|
# driver. Define -DPPSDEV ito include a serial device driver. This
|
|
|
|
|
# requires a serial port and either a line discipline or STREAMS module.
|
|
|
|
|
# Define -DPPSCD to include the driver and a special kernal hack
|
|
|
|
|
# (for SunOS 4.1.1) that intercepts carrier-detect transitions
|
|
|
|
|
# generated by the pps signal. Only one of these flags should be defined.
|
|
|
|
|
#
|
1994-02-03 22:09:07 +00:00
|
|
|
DEFS= -DUSELIBKVM -DDEBUG -DSTREAM -DREFCLOCK -DNO_SIGNED_CHAR_DECL -DPPS -DPPSDEV -DXNTP_RETROFIT_STDLIB -DNTP_POSIX_SOURCE
|
1993-12-21 18:36:48 +00:00
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Authentication types supported. Choose from DES and MD5. If you
|
|
|
|
|
# have a 680x0 type CPU and GNU-C, also choose -DFASTMD5
|
|
|
|
|
#
|
|
|
|
|
AUTHDEFS=-DDES -DMD5
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Clock support definitions (these only make sense if -DREFCLOCK used):
|
|
|
|
|
#
|
|
|
|
|
# Define -DLOCAL_CLOCK to include local pseudo-clock support
|
|
|
|
|
#
|
|
|
|
|
# Define -DPST to include support for the PST 1020 WWV/H receiver.
|
|
|
|
|
#
|
|
|
|
|
# Define -DWWVB to include support for the Spectracom 8170 WWVB receiver.
|
|
|
|
|
# Define -DWWVBPPS for PPS support via the WWVB receiver; also,
|
|
|
|
|
# define -DPPSCD in the DEFS above. This requires the ppsclock
|
|
|
|
|
# streams module under SunOS 4.2.
|
|
|
|
|
#
|
|
|
|
|
# Define -DCHU to include support for a driver to receive the CHU
|
|
|
|
|
# timecode. Note that to compile in CHU support you must
|
|
|
|
|
# previously have installed the CHU serial line discipline in
|
|
|
|
|
# the kernel of the machine you are doing the compile on.
|
|
|
|
|
#
|
|
|
|
|
# Define -DDCF to include support for the DCF77 receiver. This code
|
|
|
|
|
# requires a special STREAMS module found in the kernel directory.
|
|
|
|
|
# Define -DDCFPPS for PPS support via the DCF77 receiver; also,
|
|
|
|
|
# devine -DPPS in the DEFS above.
|
|
|
|
|
#
|
|
|
|
|
# Define -DMX4200 to support a Magnavox 4200 GPS receiver. Define -DPPSCD
|
|
|
|
|
# in the DEFS above for PPS support via this receiver. This requires
|
|
|
|
|
# the ppsclock streams module under SunOS 4.2.
|
|
|
|
|
#
|
|
|
|
|
# Define -DAS2201 to include support for the Austron 2201 GPS Timing
|
|
|
|
|
# Receiver. Define -DPPSCD in the DEFS above for PPS support via this
|
|
|
|
|
# receiver. This requires the ppsclock streams module under SunOS 4.2.
|
|
|
|
|
#
|
|
|
|
|
# Define -DGOES to support a Kinemetrics TrueTime 468-DC GOES receiver. This
|
|
|
|
|
# driver may work with other True-Time products as well.
|
|
|
|
|
#
|
|
|
|
|
# Define -DOMEGA to support a Kinemetrics TrueTime OM-DC OMEGA receiver.
|
|
|
|
|
#
|
|
|
|
|
# Define -DTPRO to support a KSI/Odetics TPRO-S IRIG-B timecode reader. This
|
|
|
|
|
# requires the Sun interface driver available from KSI.
|
|
|
|
|
#
|
|
|
|
|
# Define -DLEITCH to support a Leitch CSD 5300 Master Clock System Driver
|
|
|
|
|
# for the HP 5061B Cesium Clock.
|
|
|
|
|
#
|
|
|
|
|
CLOCKDEFS= -DLOCAL_CLOCK -DPST -DWWVB -DWWVBPPS -DCHU -DDCF -DMX4200 -DAS2201 -DGOES -DOMEGA -DTPRO -DLEITCH -DIRIG
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# For MIPS 4.3BSD or RISCos 4.0, include a -lmld to get the nlist() routine.
|
|
|
|
|
# If USELIBKVM is defined above, include a -lkvm to get the kernel
|
|
|
|
|
# routines.
|
|
|
|
|
#
|
|
|
|
|
#DAEMONLIBS= -lmld
|
|
|
|
|
DAEMONLIBS= -lkvm
|
|
|
|
|
#DAEMONLIBS=
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Name resolver library. Included when loading xntpres, which calls
|
|
|
|
|
# gethostbyname(). Define this if you would rather use a different
|
|
|
|
|
# version of the routine than the one in libc.a
|
|
|
|
|
#
|
|
|
|
|
#RESLIB= -lresolv
|
|
|
|
|
RESLIB=
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Option flags for the C compiler. A -g if you are uncomfortable
|
|
|
|
|
#
|
|
|
|
|
COPTS= -O
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# C compiler to use. gcc will work, but avoid the -fstrength-reduce option
|
|
|
|
|
# if the version is 1.35 or earlier (using this option caused incorrect
|
|
|
|
|
# code to be generated in the DES key permutation code, and perhaps
|
|
|
|
|
# elsewhere).
|
|
|
|
|
#
|
|
|
|
|
COMPILER= gcc -pipe -Wall -g -O2 -finline-functions -fdelayed-branch -fomit-frame-pointer
|
|
|
|
|
#COMPILER= cc -pipe
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Directory into which binaries should be installed
|
|
|
|
|
#
|
|
|
|
|
BINDIR= /usr/local/bin
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# Special library for adjtime emulation. Used under HP-UX
|
|
|
|
|
# (remember to run make in the adjtime directory)
|
|
|
|
|
#
|
|
|
|
|
#ADJLIB= ../adjtime/libadjtime.a
|
|
|
|
|
ADJLIB=
|
|
|
|
|
|
|
|
|
|
#
|
|
|
|
|
# BSD emulation library. In theory, this fixes signal semantics under
|
|
|
|
|
# HP-UX, but it doesn't work with 8.0 on a 9000s340, so there is now
|
|
|
|
|
# a work-around in the code (compiled when hpux80 is defined). In other
|
|
|
|
|
# words, use this for HP-UX prior to 8.0.
|
|
|
|
|
#
|
|
|
|
|
#COMPAT= -lBSD
|
|
|
|
|
COMPAT=
|
|
|
|
|
|
