freebsd-src/etc/ppp/ppp.conf.filter.sample

#
# $Id: ppp.conf.filter.sample,v 1.1.1.1 1995/01/31 06:24:33 amurai Exp $
#
# An example of packet filter definition.
#
#
filterd:
#       
# Don't keep Alive with ICMP,DNS and RIP packet
#
 set afilter 0 deny icmp
 set afilter 1 deny udp src eq 53
 set afilter 2 deny udp dst eq 53
 set afilter 3 deny udp src eq 520
 set afilter 4 deny udp dst eq 520
 set afilter 5 permit 0/0 0/0
#
# Don't dial with ICMP packet
#
 set dfilter 0 deny icmp
 set dfilter 1 permit 0/0 0/0
#
# Allow ident packet pass through
#
 set ifilter 0 permit tcp dst eq 113
 set ofilter 0 permit tcp src eq 113
#
# Allow telnet connection to the Internet
#
 set ifilter 1 permit tcp src eq 23 estab
 set ofilter 1 permit tcp dst eq 23
#
# Allow ftp access to the Internet
#
 set ifilter 2 permit tcp src eq 21 estab
 set ofilter 2 permit tcp dst eq 21
 set ifilter 3 permit tcp src eq 20 dst gt 1023
 set ofilter 3 permit tcp dst eq 20
#
# Allow access to DNS
#
 set ifilter 4 permit udp src eq 53
 set ofilter 4 permit udp dst eq 53
#
# Allow access from/to my company network
#
 set ifilter 5 permit 192.244.191.0/24 0/0
 set ofilter 5 permit 0/0 192.244.191.0/24
#
# Allow ping and traceroute response
#
 set ifilter 6 permit icmp
 set ofilter 6 permit icmp
 set ifilter 7 permit udp dst gt 33433
 set ofilter 7 permit udp dst gt 33433
#
# If none of above rules matches, then packet is blockd.
#
Reviewed by: 1995-01-31 06:24:33 +00:00			`#`
New user Process PPP based on iij-ppp0.94beta2. o Supporting SYNC SIO device (But need a device driver) - add "set speed sync" o Fixing bug for Predictor-1 function. o Add new parameter that re-sent interval for set timeout commands. o Improving RTT (Round Trip Time) and reducing processor time. - Previous Timer service was using polling, and now using SIGALRM ;-) - A 0.94beta2 will not work correctly.... -- Follows are additinal feature not including 0.94beta2 o Support Proxy ARP - add "enable/disable proxy" commands o Marging common routine in CHAP/PAP. o Enhancing LCP/IPCP log information. o Support local Authfication connection on port 300x and tty. - You can set up pair of your "hostname -s" and password in ppp.secret. if either ppp.secret file nor your hostname line don't exist, It will notify a message and working as same as previous version.(Backword compatibility) - If you did set up them, It's allow connection but nothing to do except help and passwd command. - add "passwd yourpasswd" commands o Support afilter - keep Alive filter that a packet can send/receiving according to ifilter/ofilter but doesn't count it as preventing idle timer expires. - Same syntax of other filters. o Fixing bugs reported by current user for previous one. Thanks !! Reviewed by: Atsushi Murai (amurai@spec.co.jp) 1995-02-26 12:18:08 +00:00			`# $Id: ppp.conf.filter.sample,v 1.1.1.1 1995/01/31 06:24:33 amurai Exp $`
Reviewed by: 1995-01-31 06:24:33 +00:00			`#`
			`# An example of packet filter definition.`
			`#`
			`#`
			`filterd:`
New user Process PPP based on iij-ppp0.94beta2. o Supporting SYNC SIO device (But need a device driver) - add "set speed sync" o Fixing bug for Predictor-1 function. o Add new parameter that re-sent interval for set timeout commands. o Improving RTT (Round Trip Time) and reducing processor time. - Previous Timer service was using polling, and now using SIGALRM ;-) - A 0.94beta2 will not work correctly.... -- Follows are additinal feature not including 0.94beta2 o Support Proxy ARP - add "enable/disable proxy" commands o Marging common routine in CHAP/PAP. o Enhancing LCP/IPCP log information. o Support local Authfication connection on port 300x and tty. - You can set up pair of your "hostname -s" and password in ppp.secret. if either ppp.secret file nor your hostname line don't exist, It will notify a message and working as same as previous version.(Backword compatibility) - If you did set up them, It's allow connection but nothing to do except help and passwd command. - add "passwd yourpasswd" commands o Support afilter - keep Alive filter that a packet can send/receiving according to ifilter/ofilter but doesn't count it as preventing idle timer expires. - Same syntax of other filters. o Fixing bugs reported by current user for previous one. Thanks !! Reviewed by: Atsushi Murai (amurai@spec.co.jp) 1995-02-26 12:18:08 +00:00			`#`
			`# Don't keep Alive with ICMP,DNS and RIP packet`
			`#`
			`set afilter 0 deny icmp`
			`set afilter 1 deny udp src eq 53`
			`set afilter 2 deny udp dst eq 53`
			`set afilter 3 deny udp src eq 520`
			`set afilter 4 deny udp dst eq 520`
			`set afilter 5 permit 0/0 0/0`
Reviewed by: 1995-01-31 06:24:33 +00:00			`#`
			`# Don't dial with ICMP packet`
			`#`
			`set dfilter 0 deny icmp`
			`set dfilter 1 permit 0/0 0/0`
			`#`
			`# Allow ident packet pass through`
			`#`
			`set ifilter 0 permit tcp dst eq 113`
			`set ofilter 0 permit tcp src eq 113`
			`#`
			`# Allow telnet connection to the Internet`
			`#`
			`set ifilter 1 permit tcp src eq 23 estab`
			`set ofilter 1 permit tcp dst eq 23`
			`#`
			`# Allow ftp access to the Internet`
			`#`
			`set ifilter 2 permit tcp src eq 21 estab`
			`set ofilter 2 permit tcp dst eq 21`
			`set ifilter 3 permit tcp src eq 20 dst gt 1023`
			`set ofilter 3 permit tcp dst eq 20`
			`#`
			`# Allow access to DNS`
			`#`
			`set ifilter 4 permit udp src eq 53`
			`set ofilter 4 permit udp dst eq 53`
			`#`
			`# Allow access from/to my company network`
			`#`
			`set ifilter 5 permit 192.244.191.0/24 0/0`
			`set ofilter 5 permit 0/0 192.244.191.0/24`
			`#`
			`# Allow ping and traceroute response`
			`#`
			`set ifilter 6 permit icmp`
			`set ofilter 6 permit icmp`
			`set ifilter 7 permit udp dst gt 33433`
			`set ofilter 7 permit udp dst gt 33433`
			`#`
			`# If none of above rules matches, then packet is blockd.`
			`#`