2014-04-04 08:34:46 +01:00
|
|
|
#
|
|
|
|
# $FreeBSD$
|
|
|
|
#
|
|
|
|
|
|
|
|
SRCBRANCH="base/stable/10@rHEAD"
|
|
|
|
EMBEDDEDBUILD=1
|
MFC r282500, r282693:
r282500:
Add initial support for building RPI2 images.
In release.sh, allow overriding buildenv_setup() before
the handoff to arm/release.sh.
Copy arm/RPI-B.conf -> arm/RPI2.conf, set UBOOT_PORT and
the correct KERNEL, and add the buildenv_setup() override
to install the sysutils/u-boot-rpi2 port/package.
Copy tools/arm/crochet-RPI-B.conf -> tools/arm/crochet-RPI2.conf,
and set the correct entries for the RaspberryPi2 board.
r282693:
Merge ^/projects/release-arm-redux into ^/head.
Of note:
- This commit adds native FreeBSD/arm release build support without
requiring out-of-tree utilities.
- Part of this merge removes the WANDBOARD-{SOLO,DUAL,QUAD} kernel
configuration files, for which the IMX6 kernel configuration file
should be used instead.
- The resulting images have a 'freebsd' user (password 'freebsd'),
to allow ssh(1) access when console access is not available (VGA
or serial). The default 'root' user password is set to 'root'.
- The /etc/ttys file for arm images now enable both ttyv0 and ttyu0
by default.
Note: The RPI2 kernel configuration does not yet exist in stable/10,
however the merge conflicts needed to be properly resolved.
Additionally, SRCBRANCH has been set to base/stable/10 in the updated
arm configuration files as part of this commit.
Sponsored by: The FreeBSD Foundation
2015-05-20 20:32:57 +01:00
|
|
|
EMBEDDED_TARGET="arm"
|
|
|
|
EMBEDDED_TARGET_ARCH="armv6"
|
|
|
|
EMBEDDEDPORTS="sysutils/u-boot-rpi"
|
2014-04-04 08:34:46 +01:00
|
|
|
KERNEL="RPI-B"
|
MFC r282500, r282693:
r282500:
Add initial support for building RPI2 images.
In release.sh, allow overriding buildenv_setup() before
the handoff to arm/release.sh.
Copy arm/RPI-B.conf -> arm/RPI2.conf, set UBOOT_PORT and
the correct KERNEL, and add the buildenv_setup() override
to install the sysutils/u-boot-rpi2 port/package.
Copy tools/arm/crochet-RPI-B.conf -> tools/arm/crochet-RPI2.conf,
and set the correct entries for the RaspberryPi2 board.
r282693:
Merge ^/projects/release-arm-redux into ^/head.
Of note:
- This commit adds native FreeBSD/arm release build support without
requiring out-of-tree utilities.
- Part of this merge removes the WANDBOARD-{SOLO,DUAL,QUAD} kernel
configuration files, for which the IMX6 kernel configuration file
should be used instead.
- The resulting images have a 'freebsd' user (password 'freebsd'),
to allow ssh(1) access when console access is not available (VGA
or serial). The default 'root' user password is set to 'root'.
- The /etc/ttys file for arm images now enable both ttyv0 and ttyu0
by default.
Note: The RPI2 kernel configuration does not yet exist in stable/10,
however the merge conflicts needed to be properly resolved.
Additionally, SRCBRANCH has been set to base/stable/10 in the updated
arm configuration files as part of this commit.
Sponsored by: The FreeBSD Foundation
2015-05-20 20:32:57 +01:00
|
|
|
WORLD_FLAGS="${WORLD_FLAGS} UBLDR_LOADADDR=0x2000000"
|
2015-06-17 17:29:32 +01:00
|
|
|
IMAGE_SIZE="480M"
|
MFC r282500, r282693:
r282500:
Add initial support for building RPI2 images.
In release.sh, allow overriding buildenv_setup() before
the handoff to arm/release.sh.
Copy arm/RPI-B.conf -> arm/RPI2.conf, set UBOOT_PORT and
the correct KERNEL, and add the buildenv_setup() override
to install the sysutils/u-boot-rpi2 port/package.
Copy tools/arm/crochet-RPI-B.conf -> tools/arm/crochet-RPI2.conf,
and set the correct entries for the RaspberryPi2 board.
r282693:
Merge ^/projects/release-arm-redux into ^/head.
Of note:
- This commit adds native FreeBSD/arm release build support without
requiring out-of-tree utilities.
- Part of this merge removes the WANDBOARD-{SOLO,DUAL,QUAD} kernel
configuration files, for which the IMX6 kernel configuration file
should be used instead.
- The resulting images have a 'freebsd' user (password 'freebsd'),
to allow ssh(1) access when console access is not available (VGA
or serial). The default 'root' user password is set to 'root'.
- The /etc/ttys file for arm images now enable both ttyv0 and ttyu0
by default.
Note: The RPI2 kernel configuration does not yet exist in stable/10,
however the merge conflicts needed to be properly resolved.
Additionally, SRCBRANCH has been set to base/stable/10 in the updated
arm configuration files as part of this commit.
Sponsored by: The FreeBSD Foundation
2015-05-20 20:32:57 +01:00
|
|
|
PART_SCHEME="MBR"
|
|
|
|
FAT_SIZE="17m"
|
|
|
|
FAT_TYPE="16"
|
|
|
|
MD_ARGS="-x 63 -y 255"
|
|
|
|
NODOC=1
|
|
|
|
|
|
|
|
arm_install_uboot() {
|
|
|
|
UBOOT_DIR="/usr/local/share/u-boot/u-boot-rpi"
|
|
|
|
UBOOT_FILES="bootcode.bin config.txt fixup.dat fixup_cd.dat \
|
|
|
|
start.elf start_cd.elf u-boot.img"
|
|
|
|
FATMOUNT="${DESTDIR%${KERNEL}}/fat"
|
|
|
|
UFSMOUNT="${DESTDIR%${KERNEL}}/ufs"
|
|
|
|
chroot ${CHROOTDIR} mkdir -p "${FATMOUNT}" "${UFSMOUNT}"
|
|
|
|
chroot ${CHROOTDIR} mount_msdosfs /dev/${mddev}s1 ${FATMOUNT}
|
|
|
|
chroot ${CHROOTDIR} mount /dev/${mddev}s2a ${UFSMOUNT}
|
|
|
|
for _UF in ${UBOOT_FILES}; do
|
|
|
|
chroot ${CHROOTDIR} cp -p ${UBOOT_DIR}/${_UF} \
|
|
|
|
${FATMOUNT}/${_UF}
|
|
|
|
done
|
|
|
|
chroot ${CHROOTDIR} cp -p ${UFSMOUNT}/boot/ubldr ${FATMOUNT}/ubldr
|
2015-10-02 03:08:40 +01:00
|
|
|
chroot ${CHROOTDIR} cp -p ${UFSMOUNT}/boot/ubldr.bin \
|
|
|
|
${FATMOUNT}/ubldr.bin
|
MFC r282500, r282693:
r282500:
Add initial support for building RPI2 images.
In release.sh, allow overriding buildenv_setup() before
the handoff to arm/release.sh.
Copy arm/RPI-B.conf -> arm/RPI2.conf, set UBOOT_PORT and
the correct KERNEL, and add the buildenv_setup() override
to install the sysutils/u-boot-rpi2 port/package.
Copy tools/arm/crochet-RPI-B.conf -> tools/arm/crochet-RPI2.conf,
and set the correct entries for the RaspberryPi2 board.
r282693:
Merge ^/projects/release-arm-redux into ^/head.
Of note:
- This commit adds native FreeBSD/arm release build support without
requiring out-of-tree utilities.
- Part of this merge removes the WANDBOARD-{SOLO,DUAL,QUAD} kernel
configuration files, for which the IMX6 kernel configuration file
should be used instead.
- The resulting images have a 'freebsd' user (password 'freebsd'),
to allow ssh(1) access when console access is not available (VGA
or serial). The default 'root' user password is set to 'root'.
- The /etc/ttys file for arm images now enable both ttyv0 and ttyu0
by default.
Note: The RPI2 kernel configuration does not yet exist in stable/10,
however the merge conflicts needed to be properly resolved.
Additionally, SRCBRANCH has been set to base/stable/10 in the updated
arm configuration files as part of this commit.
Sponsored by: The FreeBSD Foundation
2015-05-20 20:32:57 +01:00
|
|
|
chroot ${CHROOTDIR} cp -p ${UFSMOUNT}/boot/dtb/rpi.dtb \
|
|
|
|
${FATMOUNT}/rpi.dtb
|
|
|
|
chroot ${CHROOTDIR} touch ${UFSMOUNT}/firstboot
|
|
|
|
sync
|
|
|
|
umount_loop ${CHROOTDIR}/${FATMOUNT}
|
|
|
|
umount_loop ${CHROOTDIR}/${UFSMOUNT}
|
|
|
|
chroot ${CHROOTDIR} rmdir ${FATMOUNT}
|
|
|
|
chroot ${CHROOTDIR} rmdir ${UFSMOUNT}
|
|
|
|
|
|
|
|
return 0
|
|
|
|
}
|