jimzah/freebsd-src
1
0
Fork 0
mirror of https://github.com/freebsd/freebsd-src.git synced 2024-12-03 14:48:57 +00:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity
cdbad7d54d
freebsd-src/sys/dev/mk48txx/mk48txxvar.h

62 lines
2.6 KiB
C
Raw Normal View History

o Sync with the NetBSD mk48txx driver (the result simplyfies some changes I have in mind for the genclock interface): - Recognize the MK48T18 as well (differs from the MK48T08 only in packaging options and voltages). - Allow MD code to provide functions for reading/writing NVRAM/RTC locations. If passed NULL, the old behaviour using bus_space_{read,write}_1() is used. Otherwise, all access to the chip goes via the MD functions. This is necessary for mvmeppc boards where the mk48txx NVRAM/RTC is not directly addressable. - Cleanup MI mk48txx(4) todclock driver: - Prepare mk48txxvar.h and leave only register definitions in mk48txxreg.h. - Define struct mk48txx_softc as usual devices and allocate necessary members in it. - Change mk48txx_attach() to only take a device_t. o While converting the sparc64 eeprom driver to the above changes: - Remove some dead code and stale comments. - Use the NVRAM size provided by the mk48txx driver instead of hardcoding it as suggested by a comment. - Add a comment about why it doesn't make much sense to read the hostid directly from the NVRAM except for displaying it when attaching. - Don't print the hostid if it reads all zero because it's stored elsewhere.
2004-11-17 12:54:12 +00:00
/*-
* Copyright (c) 2000 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Paul Kranenburg.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
Remove clause 3 and 4 from TNF licenses. Obtained from: NetBSD
2009-12-25 21:41:05 +00:00
* $NetBSD: mk48txxvar.h,v 1.6 2008/04/28 20:23:50 martin Exp $
o Sync with the NetBSD mk48txx driver (the result simplyfies some changes I have in mind for the genclock interface): - Recognize the MK48T18 as well (differs from the MK48T08 only in packaging options and voltages). - Allow MD code to provide functions for reading/writing NVRAM/RTC locations. If passed NULL, the old behaviour using bus_space_{read,write}_1() is used. Otherwise, all access to the chip goes via the MD functions. This is necessary for mvmeppc boards where the mk48txx NVRAM/RTC is not directly addressable. - Cleanup MI mk48txx(4) todclock driver: - Prepare mk48txxvar.h and leave only register definitions in mk48txxreg.h. - Define struct mk48txx_softc as usual devices and allocate necessary members in it. - Change mk48txx_attach() to only take a device_t. o While converting the sparc64 eeprom driver to the above changes: - Remove some dead code and stale comments. - Use the NVRAM size provided by the mk48txx driver instead of hardcoding it as suggested by a comment. - Add a comment about why it doesn't make much sense to read the hostid directly from the NVRAM except for displaying it when attaching. - Don't print the hostid if it reads all zero because it's stored elsewhere.
2004-11-17 12:54:12 +00:00
*
* $FreeBSD$
*/
Style changes
2009-12-25 21:32:26 +00:00
typedef uint8_t (*mk48txx_nvrd_t)(device_t dev, int off);
typedef void (*mk48txx_nvwr_t)(device_t dev, int off, uint8_t v);
o Sync with the NetBSD mk48txx driver (the result simplyfies some changes I have in mind for the genclock interface): - Recognize the MK48T18 as well (differs from the MK48T08 only in packaging options and voltages). - Allow MD code to provide functions for reading/writing NVRAM/RTC locations. If passed NULL, the old behaviour using bus_space_{read,write}_1() is used. Otherwise, all access to the chip goes via the MD functions. This is necessary for mvmeppc boards where the mk48txx NVRAM/RTC is not directly addressable. - Cleanup MI mk48txx(4) todclock driver: - Prepare mk48txxvar.h and leave only register definitions in mk48txxreg.h. - Define struct mk48txx_softc as usual devices and allocate necessary members in it. - Change mk48txx_attach() to only take a device_t. o While converting the sparc64 eeprom driver to the above changes: - Remove some dead code and stale comments. - Use the NVRAM size provided by the mk48txx driver instead of hardcoding it as suggested by a comment. - Add a comment about why it doesn't make much sense to read the hostid directly from the NVRAM except for displaying it when attaching. - Don't print the hostid if it reads all zero because it's stored elsewhere.
2004-11-17 12:54:12 +00:00
struct mk48txx_softc {
- Take advantage of bus_{read,write}_*(9). - Set dow = -1 in mk48txx_gettime() because some drivers (for example the NetBSD and OpenBSD mk48txx(4)) don't set it correctly.
2009-12-25 21:53:20 +00:00
struct resource *sc_res;/* bus resource */
o Sync with the NetBSD mk48txx driver (the result simplyfies some changes I have in mind for the genclock interface): - Recognize the MK48T18 as well (differs from the MK48T08 only in packaging options and voltages). - Allow MD code to provide functions for reading/writing NVRAM/RTC locations. If passed NULL, the old behaviour using bus_space_{read,write}_1() is used. Otherwise, all access to the chip goes via the MD functions. This is necessary for mvmeppc boards where the mk48txx NVRAM/RTC is not directly addressable. - Cleanup MI mk48txx(4) todclock driver: - Prepare mk48txxvar.h and leave only register definitions in mk48txxreg.h. - Define struct mk48txx_softc as usual devices and allocate necessary members in it. - Change mk48txx_attach() to only take a device_t. o While converting the sparc64 eeprom driver to the above changes: - Remove some dead code and stale comments. - Use the NVRAM size provided by the mk48txx driver instead of hardcoding it as suggested by a comment. - Add a comment about why it doesn't make much sense to read the hostid directly from the NVRAM except for displaying it when attaching. - Don't print the hostid if it reads all zero because it's stored elsewhere.
2004-11-17 12:54:12 +00:00
- Add locking. - Add support for storing the century in MK48TXX_WDAY_CB on MK48Txx with extended registers when the MK48TXX_NO_CENT_ADJUST flag is set (and which is termed somewhat confusing as it actually means don't manually adjust the century in the driver). - Add the MI part of interfacing the watchdog functionality of MK48Txx with extended registers with watchdog(9). This is inspired by the SunOS/Solaris drivers for the 'eeprom' devices also having watchdog support. I actually expected this to work out of the box on Sun Exx00 machines with 'eeprom' devices which have a 'watchdog-enable' property. On terminal count of the the watchdog timer however only the MK48TXX_FLAGS_WDF bit rises but the reset signal and the interrupt respectively (depending on whether the MK48TXX_WDOG_WDS bit of the chip and the MK48TXX_WDOG_ENABLE_WDS flag of the driver respectively is set) goes nowhere. Apparently passing the reset signal on to the WDR line of the CPUs has to be enabled somewhere else but we don't have documentation for the Exx00 specific controllers. I decided to commit this nevertheless so it can be enabled in the eeprom(4) front-end later in e.g. 6.0-STABLE without breaking the API. Besides the Exx00 the watchdog part of the MK48Txx should also work on E250 and E450. Possibly also without extra fiddling on these machines but I haven't found someone willing to give it a try on such a machine so far. - Use uintXX_t instead of u_intXX_t, use __func__ instead of hardcoded function names in error strings.
2005-05-19 22:16:50 +01:00
struct mtx sc_mtx; /* hardware mutex */
eventhandler_tag sc_wet; /* watchdog event handler tag */
o Sync with the NetBSD mk48txx driver (the result simplyfies some changes I have in mind for the genclock interface): - Recognize the MK48T18 as well (differs from the MK48T08 only in packaging options and voltages). - Allow MD code to provide functions for reading/writing NVRAM/RTC locations. If passed NULL, the old behaviour using bus_space_{read,write}_1() is used. Otherwise, all access to the chip goes via the MD functions. This is necessary for mvmeppc boards where the mk48txx NVRAM/RTC is not directly addressable. - Cleanup MI mk48txx(4) todclock driver: - Prepare mk48txxvar.h and leave only register definitions in mk48txxreg.h. - Define struct mk48txx_softc as usual devices and allocate necessary members in it. - Change mk48txx_attach() to only take a device_t. o While converting the sparc64 eeprom driver to the above changes: - Remove some dead code and stale comments. - Use the NVRAM size provided by the mk48txx driver instead of hardcoding it as suggested by a comment. - Add a comment about why it doesn't make much sense to read the hostid directly from the NVRAM except for displaying it when attaching. - Don't print the hostid if it reads all zero because it's stored elsewhere.
2004-11-17 12:54:12 +00:00
const char *sc_model; /* chip model name */
bus_size_t sc_nvramsz; /* Size of NVRAM on the chip */
bus_size_t sc_clkoffset; /* Offset in NVRAM to clock bits */
u_int sc_year0; /* year counter offset */
u_int sc_flag; /* MD flags */
Style changes
2009-12-25 21:32:26 +00:00
#define MK48TXX_NO_CENT_ADJUST 0x0001 /* don't manually adjust century */
#define MK48TXX_WDOG_REGISTER 0x0002 /* register watchdog */
#define MK48TXX_WDOG_ENABLE_WDS 0x0004 /* enable watchdog steering bit */
o Sync with the NetBSD mk48txx driver (the result simplyfies some changes I have in mind for the genclock interface): - Recognize the MK48T18 as well (differs from the MK48T08 only in packaging options and voltages). - Allow MD code to provide functions for reading/writing NVRAM/RTC locations. If passed NULL, the old behaviour using bus_space_{read,write}_1() is used. Otherwise, all access to the chip goes via the MD functions. This is necessary for mvmeppc boards where the mk48txx NVRAM/RTC is not directly addressable. - Cleanup MI mk48txx(4) todclock driver: - Prepare mk48txxvar.h and leave only register definitions in mk48txxreg.h. - Define struct mk48txx_softc as usual devices and allocate necessary members in it. - Change mk48txx_attach() to only take a device_t. o While converting the sparc64 eeprom driver to the above changes: - Remove some dead code and stale comments. - Use the NVRAM size provided by the mk48txx driver instead of hardcoding it as suggested by a comment. - Add a comment about why it doesn't make much sense to read the hostid directly from the NVRAM except for displaying it when attaching. - Don't print the hostid if it reads all zero because it's stored elsewhere.
2004-11-17 12:54:12 +00:00
mk48txx_nvrd_t sc_nvrd; /* NVRAM/RTC read function */
mk48txx_nvwr_t sc_nvwr; /* NVRAM/RTC write function */
};
/* Chip attach function */
Style changes
2009-12-25 21:32:26 +00:00
int mk48txx_attach(device_t dev);
o Sync with the NetBSD mk48txx driver (the result simplyfies some changes I have in mind for the genclock interface): - Recognize the MK48T18 as well (differs from the MK48T08 only in packaging options and voltages). - Allow MD code to provide functions for reading/writing NVRAM/RTC locations. If passed NULL, the old behaviour using bus_space_{read,write}_1() is used. Otherwise, all access to the chip goes via the MD functions. This is necessary for mvmeppc boards where the mk48txx NVRAM/RTC is not directly addressable. - Cleanup MI mk48txx(4) todclock driver: - Prepare mk48txxvar.h and leave only register definitions in mk48txxreg.h. - Define struct mk48txx_softc as usual devices and allocate necessary members in it. - Change mk48txx_attach() to only take a device_t. o While converting the sparc64 eeprom driver to the above changes: - Remove some dead code and stale comments. - Use the NVRAM size provided by the mk48txx driver instead of hardcoding it as suggested by a comment. - Add a comment about why it doesn't make much sense to read the hostid directly from the NVRAM except for displaying it when attaching. - Don't print the hostid if it reads all zero because it's stored elsewhere.
2004-11-17 12:54:12 +00:00
/* Methods for the clock interface */
Style changes
2009-12-25 21:32:26 +00:00
int mk48txx_gettime(device_t dev, struct timespec *ts);
int mk48txx_settime(device_t dev, struct timespec *ts);
Reference in New Issue Copy Permalink