freebsd-src/installworld_newk

349 lines
12 KiB
Plaintext
Raw Normal View History

#!/bin/sh
# -------+---------+---------+---------+---------+---------+---------+---------+
# Copyright (c) 2004 - Garance Alistair Drosehn <gad@FreeBSD.org>.
#
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
# SUCH DAMAGE.
#
# -------+---------+---------+---------+---------+---------+---------+---------+
# $FreeBSD$
# -------+---------+---------+---------+---------+---------+---------+---------+
#
# This script does a 'make installworld' using the *new* versions of all
# commands to do the work. This is important when a major incompatible
# change is made, a change such that the old-binaries won't work when
# running on the new-kernel. This script was written for the change to
# 64-bit time_t on FreeBSD/Sparc64, but it is not specific to that.
#
# IMPORTANT: This script does require that you ARE RUNNING ON the
# new kernel that matches the 'world' that you want to install.
#
# -------+---------+---------+---------+---------+---------+---------+---------+
# This script expects that it will be run from /usr/src, or an
# equivalent (perhaps NFS-mounted) directory.
if [ -f MAINTAINERS -a -f UPDATING -a -f Makefile -a -f Makefile.inc1 ] ; then
SOURCE_BWDIR="`make -V .OBJDIR`"
else
echo "This script must be run from /usr/src! (or equivalent)"
exit 1
fi
DOMAKE=
DOMINI=
SETMINPATH=
SYMLINKS=
VERBOSE=
BADOPT=
while test $# != 0
do
case "$1" in
-M) SETMINPATH=yes ;;
-S) SYMLINKS=yes ;;
-y) DOMAKE=yes ;;
-n) DOMAKE=no ;;
-v) VERBOSE=yes ;;
*) echo "Invalid option: $1" ; BADOPT=yes ;;
esac
shift 1
done
if [ -n "$BADOPT" ] ; then
exit 1
fi
echo "* + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - *"
echo "* This script expects that a 'make installkernel' has already"
echo "* been done, and that you HAVE rebooted, and you ARE running"
echo "* on that new kernel."
echo "* + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - *"
echo ""
# Start out with no PATH at all.
PATH=
# Where all the binaries should be coming from.
BW_BIN="${SOURCE_BWDIR}/bin"
BW_SBIN="${SOURCE_BWDIR}/sbin"
BW_UBIN="${SOURCE_BWDIR}/usr.bin"
BW_USBIN="${SOURCE_BWDIR}/usr.sbin"
BW_GUBIN="${SOURCE_BWDIR}/gnu/usr.bin"
MKTEMPCMD=/usr/bin/mktemp
chkfile="${BW_UBIN}/mktemp/mktemp"
if [ -f "${chkfile}" -a -x "${chkfile}" ] ; then
MKTEMPCMD="${chkfile}"
else
echo "** Cannot find ${chkfile}?"
echo "** Will use ${MKTEMPCMD}"
fi
# I intentionally prefer to have a shorter name here... We just need a
# unique name, we're not likely to be under attack during installworld!
TMPHOLD=`"${MKTEMPCMD}" -q -d ${TMPDIR:-/tmp}/install-newk.XXX`
if [ $? -ne 0 ] ; then
echo "** Unable to create temp program-holding directory"
exit 1
fi
# Set the most-restrictive value for PATH that the user is willing to
# shoot for. The more restrictive we are here, the more likely we
# will catch all references to "old version" executables.
PATH=${TMPHOLD}:/sbin:/bin:/usr/sbin:/usr/bin
if [ -n "$SETMINPATH" ] ; then
PATH=${TMPHOLD}
fi
# Find the most-appropriate version of key commands for this script.
# XXX - It would be nice if we could reliably find the exact kernel that
# we booted up with, and check for the optional mini-/bin in it.
COPYCMD=/missing/cp
for chkexec in "${BW_BIN}/cp/cp" /bin/cp ; do
if [ -f "${chkexec}" ] ; then
COPYCMD="${chkexec} -p"
break
fi
done
LINKCMD=/missing/ln
for chkexec in "${BW_BIN}/ln/ln" /bin/ln ; do
if [ -f "${chkexec}" ] ; then
LINKCMD="${chkexec}"
break
fi
done
COPYINFO="Copying"
copy_exec () {
srcdir="$1"
cmdname="$2"
alsoln="$3"
srcfile="${srcdir}/${cmdname}"
if [ -f "${srcfile}" -a -x "${srcfile}" ] ; then
if [ -n "$VERBOSE" ] ; then
echo ".. ${COPYINFO} ${srcfile}"
fi
${COPYCMD} "${srcfile}" "${TMPHOLD}"
if [ $? -ne 0 ] ; then
echo "** Error ${COPYINFO} '${srcfile}'"
exit 1
fi
else
echo "** Cannot find ${cmdname} in ${srcdir}?"
exit 1
fi
if [ -n "${alsoln}" ] ; then
if [ -n "$VERBOSE" ] ; then
echo ".. Linking '${cmdname}' as '${alsoln}' "
fi
${LINKCMD} "${TMPHOLD}/${cmdname}" "${TMPHOLD}/${alsoln}"
if [ $? -ne 0 ] ; then
echo "** Error Linking '${cmdname}'"
exit 1
fi
fi
}
# The programs listed in the following `do' loop are all the same programs
# that the standard 'installworld' target wants to make copies of, except
# that this has special-cases for `awk', `[', and `egrep'. This script
# also adds the commands `cp', `install', `id' and `which', because those
# are also *used* by the standard `make installworld' target, although
# that target doesn't bother to make copies of those programs. The `sleep'
# command is also added, but only because it is used in this script. And
# `script' is included just because it can be useful when testing this script.
#
# Note that this means there will be two copies made of these files
# (because the 'make installworld' target is still going to copy them a
# second time).
# XXX - also remember that these are dynamically-linked, so this is not
# necessarily a perfect solution for the 'general case', but it
# does seem to work correctly for the switch to 64-bit time_t.
# Do the `cp' command first, because this script does so much with it.
chkfile="${BW_BIN}/cp/cp"
if [ -f "${chkfile}" -a -x "${chkfile}" ] ; then
if [ -n "$VERBOSE" ] ; then
echo ".. Copying ${chkfile}"
fi
${COPYCMD} "${chkfile}" ${TMPHOLD}
else
echo "** Cannot find ${chkfile}?"
exit 1
fi
# Do the `ln' command as the second one, for similar reasons.
copy_exec "${BW_BIN}/ln" ln
# Awk is also called 'nawk'
copy_exec "${BW_UBIN}/awk" nawk awk
# The `install' comand is also is a special case, because
# the program is actually built under the name 'xinstall'.
copy_exec "${BW_UBIN}/xinstall" xinstall install
# Mergemaster is another special case, because it's a script which is
# pulled from the /usr/src directory (not from /usr/obj/usr/src/...).
# Strictly speaking we shouldn't need to pull this in, but I do in
# case someone says 'no' to the automatic-installworld at the end
# if this script. If they also specified -M, then they end up with
# a PATH which will have only our TMPHOLD directory when they get
# to the mergemaster step.
copy_exec "`pwd`/usr.sbin/mergemaster" mergemaster.sh mergemaster
# Worried about the extra disk space that this script uses up in /tmp? Well,
# just specify the -S option, and this script will create symlinks instead of
# copying the files. Note that the original files might be NFS-mounted, and
# /tmp might be a memory-based file system, so the `installworld' might go
# much faster when copies are done here instead of symlinks.
if [ -n "$SYMLINKS" ] ; then
COPYINFO="Linking to"
COPYCMD="ln -s"
LINKCMD="ln -s"
fi
for prog in cap_mkdb cat chflags chmod chown date \
echo find grep make mkdir mtree mv \
pwd_mkdb rm sed sh sysctl test true uname wc zic \
hostname id ls sleep script umount which xargs
do
gotmatch=
for chkdir in "${BW_BIN}" "${BW_SBIN}" "${BW_UBIN}" "${BW_GUBIN}" \
"${BW_USBIN}" "${BW_USBIN}/${prog}"
do
# (the above extra-${prog} case is only needed for 'zic')
chkdir="${chkdir}/${prog}"
if [ -f "${chkdir}/${prog}" -a -x "${chkdir}/${prog}" ] ; then
gotmatch=yes
copy_exec "${chkdir}" "${prog}"
if [ $? -ne 0 ] ; then
exit 1
fi
break
fi
done
if [ -z "$gotmatch" ] ; then
echo "** Did not find '${prog}' ?"
fi
done
# Special case to handle '[', which we know is the same as 'test'
if [ -x ${TMPHOLD}/test ] ; then
if [ -n "$VERBOSE" ] ; then
echo ".. Linking 'test' as '[' "
fi
${LINKCMD} ${TMPHOLD}/test ${TMPHOLD}/[
fi
# Special case for 'egrep', which is the same as 'grep'
if [ -x ${TMPHOLD}/grep ] ; then
if [ -n "$VERBOSE" ] ; then
echo ".. Linking 'grep' as 'egrep' "
fi
${LINKCMD} ${TMPHOLD}/grep ${TMPHOLD}/egrep
fi
# Have to duplicate the standard makefile, to make a few changes.
# First find the setting of PATH. Insert a line in front of that
# which uses the (undocumented) .SHELL feature to get 'make' to
# use the newer version of /bin/sh that we just made a copy of.
# Then alter the PATH setting so that all make targets check our
# directory of copied files first. If '-M' was given, then have
# a PATH setting that looks ONLY at our copied files.
#
# XXX - the .SHELL feature did NOT seem to work the way that I
# wanted it to, but that is not a problem for now. It can
# be looked into at some later date...
nawk '/^PATH=/ { \
print "# Try to get the make cmd to use an alternate /bin/sh." ; \
print ".SHELL : name=sh path=" TDIR "/sh" ; \
print "" ; \
if (WANTMIN == "yes") \
sub(/^PATH *=[ \t]*.*/, "PATH=\t" TDIR ); \
else \
sub(/^PATH *=[ \t]*/, "PATH=\t" TDIR ":"); \
} \
/-f Makefile.inc1/ { \
sub(/Makefile.inc1/, TDIR "/Makefile.inc1" ); \
} \
{ print $0 }' \
"TDIR=${TMPHOLD}" "WANTMIN=${SETMINPATH}" Makefile > ${TMPHOLD}/Makefile
# In the case of this script, we also change Makefile.inc1, just to
# set the .SHELL target, and to make it (Makefile.inc1) reference
# the modified version in 'make -f' references. Someone recently
# committed a total restructuring of Makefile.inc1, so the following
# has to be setup such that it works with both formats.
nawk '/^# Put initial settings/ { \
print "# Try to get the make cmd to use an alternate /bin/sh." ; \
print ".SHELL : name=sh path=" TDIR "/sh" ; \
print "" ; \
} \
/^SUBDIR=[\t ]*share\/info .*bin/ { \
print "# Try to get the make cmd to use an alternate /bin/sh." ; \
print ".SHELL : name=sh path=" TDIR "/sh" ; \
print "" ; \
} \
/-f Makefile.inc1/ { \
sub(/Makefile.inc1/, TDIR "/Makefile.inc1" ); \
} \
{ print $0 }' \
"TDIR=${TMPHOLD}" Makefile.inc1 > "${TMPHOLD}/Makefile.inc1"
echo ""
echo "The key programs needed by 'make installworld' have been copied."
if [ -n "$VERBOSE" ] ; then
ls -C ${TMPHOLD}
echo ""
fi
# The sparc64_installcheck will want this in the environment.
NEWSPARC_TIMETYPE=__int64_t
export NEWSPARC_TIMETYPE
# See if the user wants us to go ahead with 'installworld',
# or just tell them what steps they need to do.
if [ -z "${DOMAKE}" ] ; then
echo "Do you want to proceed with 'installworld'? "
read -p "(y/n) ? " DOMAKE remline
echo " "
fi
if [ -n "`echo /y/yes/okay/ok/ | grep -i \"/${DOMAKE}/\"`" ] ; then
echo "Okay then, this script has set:"
echo " NEWSPARC_TIMETYPE=__int64_t"
echo " PATH=${PATH}"
echo "and will now execute the command:"
echo " make -f ${TMPHOLD}/Makefile installworld"
sleep 4
make -f ${TMPHOLD}/Makefile installworld
else
echo "When you are ready to continue, enter the commands:"
echo " PATH=${PATH}"
echo "or:"
echo " PATH=${TMPHOLD}:\${PATH}"
echo "and:"
echo " NEWSPARC_TIMETYPE=__int64_t"
echo " export NEWSPARC_TIMETYPE"
echo " make -f ${TMPHOLD}/Makefile installworld"
fi