Spelling: s/then/than/ where appropriate.

This commit is contained in:
Ruslan Ermilov 2002-12-24 16:52:31 +00:00
parent dcce7232ef
commit 074ad11567
Notes: svn2git 2020-12-20 02:59:44 +00:00
svn path=/head/; revision=108260
9 changed files with 16 additions and 16 deletions

View File

@ -136,7 +136,7 @@ for further information.
Region is not included in a core file.
.It Dv MAP_NOSYNC
Causes data dirtied via this VM map to be flushed to physical media
only when necessary (usually by the pager) rather then gratuitously.
only when necessary (usually by the pager) rather than gratuitously.
Typically this prevents the update daemons from flushing pages dirtied
through such maps and thus allows efficient sharing of memory across
unassociated processes using a file-backed shared memory map.
@ -175,7 +175,7 @@ The same applies when using
to implement a file-based shared memory store.
It is recommended that you create the backing store by
.Fn write Ns ing
zero's to the backing file rather then
zero's to the backing file rather than
.Fn ftruncate Ns ing
it.
You can test file fragmentation by observing the KB/t (kilobytes per
@ -200,7 +200,7 @@ system call is obsolete since
implements a coherent file system buffer cache.
However, it may be
used to associate dirty VM pages with file system buffers and thus cause
them to be flushed to physical media sooner rather then later.
them to be flushed to physical media sooner rather than later.
.It Dv MAP_PRIVATE
Modifications are private.
.It Dv MAP_SHARED

View File

@ -134,7 +134,7 @@ seconds
.Em between sending each packet .
The default is to wait for one second between each packet.
The wait time may be fractional, but only the super-user may specify
values less then 1 second.
values less than 1 second.
This option is incompatible with the
.Fl f
option.

View File

@ -164,7 +164,7 @@ other side of the mirror.
Currently
.Nm
uses a dual seek zone model to optimize reads for a multi-tasking load
rather then a sequential load.
rather than a sequential load.
.Pp
In an event of a disk
failure, you can use

View File

@ -172,7 +172,7 @@ by
.Va i_data
and
.Va i_len .
The length should be no longer then 32 characters.
The length should be no longer than 32 characters.
.It Dv IEEE80211_IOC_WEP
Set the current WEP mode to the value given in
.Va i_val .

View File

@ -341,7 +341,7 @@ effectively disables the algorithm.
This puts an upper bound on the bandwidth delay product window, in bytes.
This value should not generally be modified but may be used to set a
global per-connection limit on queued data, potentially allowing you to
intentionally set a less then optimum limit to smooth data flow over a
intentionally set a less than optimum limit to smooth data flow over a
network while still being able to specify huge internal TCP buffers.
.It tcp.inflight_stab
The bandwidth delay product algorithm requires a slightly larger window

View File

@ -74,7 +74,7 @@ nearly impossible to stop short of cutting your system off from the Internet.
It may not be able to take your machine down, but it can fill up Internet
pipe.
.Pp
A user account compromise is even more common then a D.O.S. attack. Many
A user account compromise is even more common than a D.O.S. attack. Many
sysadmins still run standard telnetd, rlogind, rshd, and ftpd servers on their
machines. These servers, by default, do not operate over encrypted
connections. The result is that if you have any moderate-sized user base,
@ -174,7 +174,7 @@ to root without having to place anyone at all in the wheel group. This
may be the better solution since the wheel mechanism still allows an
intruder to break root if the intruder has gotten hold of your password
file and can break into a staff account. While having the wheel mechanism
is better then having nothing at all, it isn't necessarily the safest
is better than having nothing at all, it isn't necessarily the safest
option.
.Pp
An indirect way to secure the root account is to secure your staff accounts
@ -276,7 +276,7 @@ Still, root holes are occasionally found in these binaries. A root hole
was found in Xlib in 1998 that made xterm
(which is typically suid)
vulnerable.
It is better to be safe then sorry and the prudent sysadmin will restrict suid
It is better to be safe than sorry and the prudent sysadmin will restrict suid
binaries that only staff should run to a special group that only staff can
access, and get rid of
.Pq Li "chmod 000"
@ -369,7 +369,7 @@ while it may protect the files, it also closes a detection window. The
last layer of your security onion is perhaps the most important - detection.
The rest of your security is pretty much useless (or, worse, presents you with
a false sense of safety) if you cannot detect potential incursions. Half
the job of the onion is to slow down the attacker rather then stop him
the job of the onion is to slow down the attacker rather than stop him
in order to give the detection side of the equation a chance to catch him in
the act.
.Pp
@ -413,7 +413,7 @@ such as
and
.Pa /usr
.Pp
When using ssh rather then NFS, writing the security script is much more
When using ssh rather than NFS, writing the security script is much more
difficult. You essentially have to
.Pa scp
the scripts to the client box in order to run them, making them visible, and
@ -608,7 +608,7 @@ with
These routes typically timeout in 1600
seconds or so. If the kernel detects that the cached route table has gotten
too big it will dynamically reduce the rtexpire but will never decrease it to
less then rtminexpire. There are two problems: (1) The kernel does not react
less than rtminexpire. There are two problems: (1) The kernel does not react
quickly enough when a lightly loaded server is suddenly attacked, and (2) The
rtminexpire is not low enough for the kernel to survive a sustained attack.
If your servers are connected to the internet via a T3 or better it may be

View File

@ -496,7 +496,7 @@ Many people also enforce artificial
bandwidth limitations in order to ensure that they are not charged for
using too much bandwidth.
.Pp
Setting the send or receive TCP buffer to values larger then 65535 will result
Setting the send or receive TCP buffer to values larger than 65535 will result
in a marginal performance improvement unless both hosts support the window
scaling extension of the TCP protocol, which is controlled by the
.Va net.inet.tcp.rfc1323

View File

@ -75,7 +75,7 @@ the child devices will be automatically probed and attached.
A value equal to or less than zero indicates success, greater than
zero indicates an error (errno). For values equal to or less than
zero: zero indicates highest priority, no further probing is done;
for a value less then zero, the lower the value the lower the
for a value less than zero, the lower the value the lower the
priority, e.g. -100 indicates a lower priority than -50.
.Sh SEE ALSO
.Xr device 9 ,

View File

@ -152,7 +152,7 @@ If this flag is set,
.Fn malloc
will return
.Dv NULL
rather then block.
rather than block.
Note that
.Dv M_WAITOK
is defined to be 0, meaning that blocking operation is the default.