From 2646609bb712f82c1dc737033c3ceee42eb00c9f Mon Sep 17 00:00:00 2001 From: Peter Wemm Date: Fri, 10 Nov 1995 21:39:32 +0000 Subject: [PATCH] ppp-2.2 doesn't have a RELNOTES file anymore, so the old one here was rather out of date.. it even suggested that it was ppp-2.1.1 still :-) I've selected some bits from the README files and pre-pended it so that at least reading it tells you _something_ about the recent history. --- usr.sbin/pppd/RELNOTES | 147 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 147 insertions(+) diff --git a/usr.sbin/pppd/RELNOTES b/usr.sbin/pppd/RELNOTES index b993de2b4689..8567a7a709f2 100644 --- a/usr.sbin/pppd/RELNOTES +++ b/usr.sbin/pppd/RELNOTES @@ -1,3 +1,150 @@ +This is the README file for ppp-2.2, a package which implements the +Point-to-Point Protocol (PPP) to provide Internet connections over +serial lines. + + +Introduction. +************* + +The Point-to-Point Protocol (PPP) provides a standard way to transmit +datagrams over a serial link, as well as a standard way for the +machines at either end of the link (the `peers') to negotiate various +optional characteristics of the link. Using PPP, a serial link can be +used to transmit Internet Protocol (IP) datagrams, allowing TCP/IP +connections between the peers. PPP is defined in several RFC (Request +For Comments) documents, in particular RFCs 1661, 1662, 1332 and 1334. +Other RFCs describe standard ways to transmit datagrams from other +network protocols (e.g., DECnet, OSI, Appletalk), but this package +only supports IP. + +This software consists of two parts: + +- Kernel code, which establishes a network interface and passes +packets between the serial port, the kernel networking code and the +PPP daemon (pppd). This code is implemented using STREAMS modules on +SunOS 4.x, AIX 4.1 and OSF/1, and as a line discipline under Ultrix, +NextStep, NetBSD, FreeBSD, and Linux. + +- The PPP daemon (pppd), which negotiates with the peer to establish +the link and sets up the ppp network interface. Pppd includes support +for authentication, so you can control which other systems may make a +PPP connection and what IP addresses they may use. + + +What is new in ppp-2.2. +*********************** + +* More systems are now supported: + + AIX 4, thanks to Charlie Wick, + OSF/1 on DEC Alpha, thanks to Steve Tate (srt@zaphod.csci.unt.edu), + NextStep 3.2 and 3.3, thanks to Philip-Andrew Prindeville + (philipp@res.enst.fr) and Steve Perkins (perkins@cps.msu.edu), + Solaris 2, + +in addition to NetBSD 1.0, SunOS 4.x, Ultrix 4.x, FreeBSD 2.0, and +Linux. + +* Packet compression has been implemented. This version implements +CCP (Compression Control Protocol) and the BSD-Compress compression +scheme according to the current draft RFCs. This means that incoming +and outgoing packets can be compressed with the LZW scheme (same as +the `compress' command) using a code size of up to 15 bits. + +* Some bug fixes to the LCP protocol code. In particular, pppd now +correctly replies with a Configure-NAK (instead of a Configure-Reject) +if the peer asks for CHAP and pppd is willing to do PAP but not CHAP. + +* The ip-up and ip-down scripts are now run with the real user ID set +to root, and with an empty environment. Clearing the environment +fixes a security hole. + +* The kernel code on NetBSD, FreeBSD, NextStep and Ultrix has been +restructured to make it easier to implement PPP over devices other +than asynchronous tty ports (for example, synchronous serial ports). + +* pppd now looks at the list of interfaces in the system to determine +what the netmask should be. In most cases, this should eliminate the +need to use the `netmask' option. + +* There is a new `papcrypt' option to pppd, which specifies that +secrets in /etc/ppp/pap-secrets used for authenticating the peer are +encrypted, so pppd always encrypts the peer's password before +comparing it with the secret from /etc/ppp/pap-secrets. This gives +better security. + + +Patents. +******** + +The BSD-Compress algorithm used for packet compression is the same as +that used in the Unix "compress" command. It is apparently covered by +U.S. patents 4,814,746 (owned by IBM) and 4,558,302 (owned by Unisys), +and corresponding patents in various other countries (but not +Australia). If this is of concern, you can build the package without +including BSD-Compress. To do this, edit net/ppp-comp.h to change the +definition of DO_BSD_COMPRESS to 0. The bsd-comp.c files are then no +longer needed, so the references to bsd-comp.o may optionally be +removed from the Makefiles. + + +Contacts. +********* + +Bugs in the the SunOS, NetBSD and Ultrix ports and bugs in pppd, chat +or pppstats should be reported to: + + paulus@cs.anu.edu.au + Paul Mackerras + Dept. of Computer Science + Australian National University + Canberra ACT 0200 + AUSTRALIA + +Bugs in other ports should be reported to the maintainer for that port +(see the appropriate README.* file) or to the above. Unfortunately, +Charlie Wick is not in a position to provide support for the AIX 4 +port, so if you find bugs in it, send them to me. + +Thanks to: + + Brad Parker (brad@fcr.com) + Greg Christy (gmc@quotron.com) + Drew D. Perkins (ddp@andrew.cmu.edu) + Rick Adams (rick@seismo.ARPA) + Chris Torek (chris@mimsy.umd.edu, umcp-cs!chris). + + +Copyrights: + +Most of the code can be freely used and redistributed. The STREAMS +code for SunOS 4.x, OSF/1 and AIX 4 is under a more restrictive +copyright: + + This code is Copyright (C) 1989, 1990 By Brad K. Clements, + All Rights Reserved. + + You may use this code for your personal use, to provide a non-profit + service to others, or to use as a test platform for a commercial + implementation. + + You may NOT use this code in a commercial product, nor to provide a + commercial service, nor may you sell this code without express + written permission of the author. + + Otherwise, Enjoy! + +This copyright applies to (parts of) the following files: + + sunos/ppp_async.c + sunos/ppp_if.c + aix4/ppp_async.c + aix4/ppp_if.c + net/ppp_str.h + pppd/sys-str.c + pppd/sys-osf.c + pppd/sys-aix4.c +------------------------- pppd-2.1.1 release notes Paul Mackerras 27 May 1994