mirror of
https://github.com/freebsd/freebsd-src.git
synced 2024-12-02 21:32:58 +00:00
More fully initialize cardbus bridges. We now call the new generic
cardbus bridge init routine for all cardbuses. This routine attempts to compensate for BIOSes that do not setup the cardbus bridge into legacy mode. Since this is becoming more common, and cardbus pci cards have appeared on the market, this makes sense. Do some TI113x specific initialization. This came in as part of the patch. Report TI1[1234]XX specific config registers protected by bootverbose. Minor code cleanup while I'm here. I've also removed the unused code present in the original patches, and cleaned it up slightly in places as well. The original patches supported more than one card, but these patches support just one. We should likely revisit this in the future. This makes the Compaq card that Walnut Creek CD purchased for me work in my bouncer box. This is a MFC candidate. However, I'd like to get some airtime on these patches on as many laptops as possible before doing the MFC. It does change things somewhat. In theory, apart from the minor TI tweaks, this shouldn't change anything if the bridge is in legacy mode already. Submitted by: sanpei@sanpei.org (MIHIRA Yoshiro)
This commit is contained in:
Warner Losh
parent
bddc1909cf
commit
6ea2fbe9be
Notes:
svn2git
2020-12-20 02:59:44 +00:00
svn path=/head/; revision=58571
@ -32,6 +32,7 @@
|
||||
#include <sys/param.h>
|
||||
#include <sys/kernel.h>
|
||||
#include <sys/systm.h>
|
||||
#include <sys/malloc.h>
|
||||
#include <sys/bus.h>
|
||||
#include <pci/pcireg.h>
|
||||
#include <pci/pcivar.h>
|
||||
@ -40,12 +41,14 @@
|
||||
#include <vm/vm.h>
|
||||
#include <vm/pmap.h>
|
||||
|
||||
#define PRVERB(x) if (bootverbose) device_printf x
|
||||
|
||||
/*
|
||||
* Set up the CL-PD6832 to look like a ISA based PCMCIA chip (a
|
||||
* PD672X). This routine is called once per PCMCIA socket.
|
||||
*/
|
||||
static void
|
||||
pd6832_legacy_init(device_t self)
|
||||
pd6832_legacy_init(device_t dev)
|
||||
{
|
||||
u_long bcr; /* to set interrupts */
|
||||
u_short io_port; /* the io_port to map this slot on */
|
||||
@ -53,7 +56,8 @@ pd6832_legacy_init(device_t self)
|
||||
int unit;
|
||||
|
||||
num6832 = 0;
|
||||
unit = device_get_unit(self);
|
||||
unit = device_get_unit(dev);
|
||||
|
||||
/*
|
||||
* Some BIOS leave the legacy address uninitialized. This
|
||||
* insures that the PD6832 puts itself where the driver will
|
||||
@ -63,15 +67,15 @@ pd6832_legacy_init(device_t self)
|
||||
*/
|
||||
io_port = PCIC_INDEX_0 + num6832 * CLPD6832_NUM_REGS;
|
||||
if (unit == 0)
|
||||
pci_write_config(self, CLPD6832_LEGACY_16BIT_IOADDR,
|
||||
io_port & ~PCI_MAP_IO, 4);
|
||||
pci_write_config(dev, CLPD6832_LEGACY_16BIT_IOADDR,
|
||||
io_port & ~PCI_MAP_IO, 4);
|
||||
|
||||
/*
|
||||
* I think this should be a call to pci_map_port, but that
|
||||
* routine won't map regiaters above 0x28, and the register we
|
||||
* need to map is 0x44.
|
||||
*/
|
||||
io_port = pci_read_config(self, CLPD6832_LEGACY_16BIT_IOADDR, 4) &
|
||||
io_port = pci_read_config(dev, CLPD6832_LEGACY_16BIT_IOADDR, 4) &
|
||||
~PCI_MAP_IO;
|
||||
|
||||
/*
|
||||
@ -79,49 +83,148 @@ pd6832_legacy_init(device_t self)
|
||||
* words and deactivate the second by setting the limit lower
|
||||
* than the base.
|
||||
*/
|
||||
pci_write_config(self, CLPD6832_IO_BASE0, io_port | 1, 4);
|
||||
pci_write_config(self, CLPD6832_IO_LIMIT0,
|
||||
(io_port + CLPD6832_NUM_REGS) | 1, 4);
|
||||
pci_write_config(dev, CLPD6832_IO_BASE0, io_port | 1, 4);
|
||||
pci_write_config(dev, CLPD6832_IO_LIMIT0,
|
||||
(io_port + CLPD6832_NUM_REGS) | 1, 4);
|
||||
|
||||
pci_write_config(self, CLPD6832_IO_BASE1, (io_port + 0x20) | 1, 4);
|
||||
pci_write_config(self, CLPD6832_IO_LIMIT1, io_port | 1, 4);
|
||||
pci_write_config(dev, CLPD6832_IO_BASE1, (io_port + 0x20) | 1, 4);
|
||||
pci_write_config(dev, CLPD6832_IO_LIMIT1, io_port | 1, 4);
|
||||
|
||||
/*
|
||||
* Set default operating mode (I/O port space) and allocate
|
||||
* this socket to the current unit.
|
||||
*/
|
||||
pci_write_config(self, PCI_COMMAND_STATUS_REG,
|
||||
CLPD6832_COMMAND_DEFAULTS, 4);
|
||||
pci_write_config(self, CLPD6832_SOCKET, unit, 4);
|
||||
pci_write_config(dev, PCI_COMMAND_STATUS_REG,
|
||||
CLPD6832_COMMAND_DEFAULTS, 4);
|
||||
pci_write_config(dev, CLPD6832_SOCKET, unit, 4);
|
||||
|
||||
/*
|
||||
* Set up the card inserted/card removed interrupts to come
|
||||
* through the isa IRQ.
|
||||
*/
|
||||
bcr = pci_read_config(self, CLPD6832_BRIDGE_CONTROL, 4);
|
||||
bcr = pci_read_config(dev, CLPD6832_BRIDGE_CONTROL, 4);
|
||||
bcr |= (CLPD6832_BCR_ISA_IRQ|CLPD6832_BCR_MGMT_IRQ_ENA);
|
||||
pci_write_config(self, CLPD6832_BRIDGE_CONTROL, bcr, 4);
|
||||
pci_write_config(dev, CLPD6832_BRIDGE_CONTROL, bcr, 4);
|
||||
|
||||
/* After initializing 2 sockets, the chip is fully configured */
|
||||
if (unit == 1)
|
||||
num6832++;
|
||||
|
||||
if (bootverbose)
|
||||
printf("CardBus: Legacy PC-card 16bit I/O address [0x%x]\n",
|
||||
io_port);
|
||||
PRVERB((dev, "CardBus: Legacy PC-card 16bit I/O address [0x%x]\n",
|
||||
io_port));
|
||||
}
|
||||
|
||||
/*
|
||||
* TI1XXX PCI-CardBus Host Adapter specific function code.
|
||||
* This function is separated from pcic_pci_attach().
|
||||
* Support Device: TI1130,TI1131,TI1250,TI1220.
|
||||
* Test Device: TI1221.
|
||||
* Takeshi Shibagaki(shiba@jp.freebsd.org).
|
||||
*/
|
||||
static void
|
||||
ti1xxx_pci_init(device_t dev)
|
||||
{
|
||||
u_long syscntl,devcntl,cardcntl;
|
||||
u_int32_t device_id = pci_get_devid(dev);
|
||||
char buf[128];
|
||||
int ti113x = (device_id == PCI_DEVICE_ID_PCIC_TI1130)
|
||||
|| (device_id == PCI_DEVICE_ID_PCIC_TI1131);
|
||||
|
||||
syscntl = pci_read_config(dev, TI113X_PCI_SYSTEM_CONTROL, 4);
|
||||
devcntl = pci_read_config(dev, TI113X_PCI_DEVICE_CONTROL, 1);
|
||||
cardcntl = pci_read_config(dev, TI113X_PCI_CARD_CONTROL, 1);
|
||||
|
||||
switch(ti113x){
|
||||
case 0 :
|
||||
strcpy(buf, "TI12XX PCI Config Reg: ");
|
||||
break;
|
||||
case 1 :
|
||||
strcpy(buf, "TI113X PCI Config Reg: ");
|
||||
/*
|
||||
* Defalut card control register setting is
|
||||
* PCI interrupt. The method of this code
|
||||
* switches PCI INT and ISA IRQ by bit 7 of
|
||||
* Bridge Control Register(Offset:0x3e,0x13e).
|
||||
* Takeshi Shibagaki(shiba@jp.freebsd.org)
|
||||
*/
|
||||
cardcntl |= TI113X_CARDCNTL_PCI_IREQ;
|
||||
cardcntl |= TI113X_CARDCNTL_PCI_CSC;
|
||||
if (syscntl & TI113X_SYSCNTL_CLKRUN_ENA){
|
||||
if (syscntl & TI113X_SYSCNTL_CLKRUN_SEL)
|
||||
strcat(buf, "[clkrun irq 12]");
|
||||
else
|
||||
strcat(buf, "[clkrun irq 10]");
|
||||
}
|
||||
break;
|
||||
}
|
||||
if (cardcntl & TI113X_CARDCNTL_RING_ENA)
|
||||
strcat(buf, "[ring enable]");
|
||||
if (cardcntl & TI113X_CARDCNTL_SPKR_ENA)
|
||||
strcat(buf, "[speaker enable]");
|
||||
if (syscntl & TI113X_SYSCNTL_PWRSAVINGS)
|
||||
strcat(buf, "[pwr save]");
|
||||
switch(devcntl & TI113X_DEVCNTL_INTR_MASK){
|
||||
case TI113X_DEVCNTL_INTR_ISA :
|
||||
strcat(buf, "[CSC parallel isa irq]");
|
||||
break;
|
||||
case TI113X_DEVCNTL_INTR_SERIAL :
|
||||
strcat(buf, "[CSC serial isa irq]");
|
||||
break;
|
||||
case TI113X_DEVCNTL_INTR_NONE :
|
||||
strcat(buf, "[pci only]");
|
||||
break;
|
||||
case TI12XX_DEVCNTL_INTR_ALLSERIAL :
|
||||
strcat(buf, "[FUNC pci int + CSC serial isa irq]");
|
||||
break;
|
||||
}
|
||||
pci_write_config(dev, TI113X_PCI_CARD_CONTROL, cardcntl, 1);
|
||||
if (ti113x)
|
||||
cardcntl = pci_read_config(dev, TI113X_PCI_CARD_CONTROL, 1);
|
||||
device_printf(dev, "%s\n",buf);
|
||||
}
|
||||
|
||||
static void
|
||||
generic_cardbus_attach(device_t dev)
|
||||
{
|
||||
u_int16_t brgcntl;
|
||||
u_int32_t iobase;
|
||||
int unit;
|
||||
|
||||
unit = device_get_unit(dev);
|
||||
|
||||
/* Output ISA IRQ indicated in ExCA register(0x03). */
|
||||
brgcntl = pci_read_config(dev, CB_PCI_BRIDGE_CTRL, 2);
|
||||
brgcntl |= CB_BCR_INT_EXCA;
|
||||
pci_write_config(dev, CB_PCI_BRIDGE_CTRL, brgcntl, 2);
|
||||
|
||||
/* 16bit Legacy Mode Base Address */
|
||||
if (unit != 0)
|
||||
return;
|
||||
|
||||
iobase = pci_read_config(dev, CB_PCI_LEGACY16_IOADDR, 2)
|
||||
& ~PCI_MAP_IO;
|
||||
if (!iobase) {
|
||||
iobase = 0x3e0 | PCI_MAP_IO;
|
||||
pci_write_config(dev, CB_PCI_LEGACY16_IOADDR, iobase, 2);
|
||||
iobase = pci_read_config(dev, CB_PCI_LEGACY16_IOADDR, 2)
|
||||
& ~PCI_MAP_IO;
|
||||
}
|
||||
PRVERB((dev, "Legacy address set to %#x\n", iobase));
|
||||
return;
|
||||
}
|
||||
|
||||
|
||||
/*
|
||||
* Return the ID string for the controller if the vendor/product id
|
||||
* matches, NULL otherwise.
|
||||
*/
|
||||
static int
|
||||
pcic_pci_probe(device_t self)
|
||||
pcic_pci_probe(device_t dev)
|
||||
{
|
||||
u_int32_t device_id;
|
||||
char *desc;
|
||||
|
||||
device_id = pci_get_devid(self);
|
||||
device_id = pci_get_devid(dev);
|
||||
desc = NULL;
|
||||
|
||||
switch (device_id) {
|
||||
@ -182,6 +285,7 @@ pcic_pci_probe(device_t self)
|
||||
case PCI_DEVICE_ID_RICOH_RL5C478:
|
||||
desc = "Ricoh RL5C478 PCI-CardBus Bridge";
|
||||
break;
|
||||
|
||||
/* 16bit PC-card bridges */
|
||||
case PCI_DEVICE_ID_PCIC_CLPD6729:
|
||||
desc = "Cirrus Logic PD6729/6730 PC-Card Controller";
|
||||
@ -200,7 +304,7 @@ pcic_pci_probe(device_t self)
|
||||
if (desc == NULL)
|
||||
return (ENXIO);
|
||||
|
||||
device_set_desc(self, desc);
|
||||
device_set_desc(dev, desc);
|
||||
return 0; /* exact match */
|
||||
}
|
||||
|
||||
@ -210,13 +314,44 @@ pcic_pci_probe(device_t self)
|
||||
* it only understands the CL-PD6832.
|
||||
*/
|
||||
static int
|
||||
pcic_pci_attach(device_t self)
|
||||
pcic_pci_attach(device_t dev)
|
||||
{
|
||||
u_int32_t device_id = pci_get_devid(self);
|
||||
u_int32_t device_id = pci_get_devid(dev);
|
||||
u_long command;
|
||||
|
||||
/* Init. CardBus/PC-card controllers as 16-bit PC-card controllers */
|
||||
|
||||
/* Place any per "slot" initialization here */
|
||||
|
||||
/*
|
||||
* In sys/pci/pcireg.h, PCI_COMMAND_STATUS_REG must be separated
|
||||
* PCI_COMMAND_REG(0x04) and PCI_STATUS_REG(0x06).
|
||||
* Takeshi Shibagaki(shiba@jp.freebsd.org).
|
||||
*/
|
||||
command = pci_read_config(dev, PCI_COMMAND_STATUS_REG, 4);
|
||||
command |= PCI_COMMAND_IO_ENABLE | PCI_COMMAND_MEM_ENABLE;
|
||||
pci_write_config(dev, PCI_COMMAND_STATUS_REG, command, 4);
|
||||
|
||||
switch (device_id) {
|
||||
case PCI_DEVICE_ID_PCIC_TI1130:
|
||||
case PCI_DEVICE_ID_PCIC_TI1131:
|
||||
case PCI_DEVICE_ID_PCIC_TI1220:
|
||||
case PCI_DEVICE_ID_PCIC_TI1221:
|
||||
case PCI_DEVICE_ID_PCIC_TI1250:
|
||||
case PCI_DEVICE_ID_PCIC_TI1251:
|
||||
case PCI_DEVICE_ID_PCIC_TI1251B:
|
||||
case PCI_DEVICE_ID_PCIC_TI1225:
|
||||
case PCI_DEVICE_ID_PCIC_TI1410:
|
||||
case PCI_DEVICE_ID_PCIC_TI1420:
|
||||
case PCI_DEVICE_ID_PCIC_TI1450:
|
||||
case PCI_DEVICE_ID_PCIC_TI1451:
|
||||
ti1xxx_pci_init(dev);
|
||||
/* FALLTHROUGH */
|
||||
default:
|
||||
generic_cardbus_attach(dev);
|
||||
break;
|
||||
case PCI_DEVICE_ID_PCIC_CLPD6832:
|
||||
pd6832_legacy_init(self);
|
||||
pd6832_legacy_init(dev);
|
||||
break;
|
||||
}
|
||||
|
||||
@ -229,10 +364,10 @@ pcic_pci_attach(device_t self)
|
||||
for (j = 0; j < 0x98; j += 16) {
|
||||
printf("%02x: ", j);
|
||||
for (i = 0; i < 16; i += 4)
|
||||
printf(" %08x", pci_read_config(self, i+j, 4));
|
||||
printf(" %08x", pci_read_config(dev, i+j, 4));
|
||||
printf("\n");
|
||||
}
|
||||
p = (u_char *)pmap_mapdev(pci_read_config(self, 0x10, 4),
|
||||
p = (u_char *)pmap_mapdev(pci_read_config(dev, 0x10, 4),
|
||||
0x1000);
|
||||
pl = (u_long *)p;
|
||||
printf("Cardbus Socket registers:\n");
|
||||
@ -247,10 +382,9 @@ pcic_pci_attach(device_t self)
|
||||
printf("%02x: %16D\n", i, p + 0x800 + i, " ");
|
||||
}
|
||||
|
||||
return 0; /* no error */
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
||||
static device_method_t pcic_pci_methods[] = {
|
||||
/* Device interface */
|
||||
DEVMETHOD(device_probe, pcic_pci_probe),
|
||||
|
||||
@ -69,3 +69,82 @@
|
||||
#define CLPD6832_NUM_REGS 2
|
||||
|
||||
/* End of CL-PD6832 defines */
|
||||
/* Texas Instruments PCI-1130/1131 CardBus Controller */
|
||||
#define TI113X_PCI_SYSTEM_CONTROL 0x80 /* System Control */
|
||||
#define TI113X_PCI_RETRY_STATUS 0x90 /* Retry Status */
|
||||
#define TI113X_PCI_CARD_CONTROL 0x91 /* Card Control */
|
||||
#define TI113X_PCI_DEVICE_CONTROL 0x92 /* Device Control */
|
||||
#define TI113X_PCI_BUFFER_CONTROL 0x93 /* Buffer Control */
|
||||
#define TI113X_PCI_SOCKET_DMA0 0x94 /* Socket DMA Register 0 */
|
||||
#define TI113X_PCI_SOCKET_DMA1 0x98 /* Socket DMA Register 1 */
|
||||
|
||||
/* Card control register (TI113X_SYSTEM_CONTROL == 0x80) */
|
||||
#define TI113X_SYSCNTL_VCC_PROTECT 0x00200000u
|
||||
#define TI113X_SYSCNTL_CLKRUN_SEL 0x00000080u
|
||||
#define TI113X_SYSCNTL_PWRSAVINGS 0x00000040u
|
||||
#define TI113X_SYSCNTL_KEEP_CLK 0x00000002u
|
||||
#define TI113X_SYSCNTL_CLKRUN_ENA 0x00000001u
|
||||
|
||||
/* Card control register (TI113X_CARD_CONTROL == 0x91) */
|
||||
#define TI113X_CARDCNTL_RING_ENA 0x80u
|
||||
#define TI113X_CARDCNTL_ZOOM_VIDEO 0x40u
|
||||
#define TI113X_CARDCNTL_PCI_IRQ_ENA 0x20u
|
||||
#define TI113X_CARDCNTL_PCI_IREQ 0x10u
|
||||
#define TI113X_CARDCNTL_PCI_CSC 0x08u
|
||||
#define TI113X_CARDCNTL_MASK (TI113X_CARDCNTL_PCI_IRQ_ENA | TI113X_CARDCNTL_PCI_IREQ | TI113X_CARDCNTL_PCI_CSC)
|
||||
#define TI113X_FUNC0_VALID TI113X_CARDCNTL_MASK
|
||||
#define TI113X_FUNC1_VALID (TI113X_CARDCNTL_PCI_IREQ | TI113X_CARDCNTL_PCI_CSC)
|
||||
/* Reserved bit 0x04u */
|
||||
#define TI113X_CARDCNTL_SPKR_ENA 0x02u
|
||||
#define TI113X_CARDCNTL_INT 0x01u
|
||||
|
||||
/* Device control register (TI113X_DEVICE_CONTROL == 0x92) */
|
||||
#define TI113X_DEVCNTL_5V_SOCKET 0x40u
|
||||
#define TI113X_DEVCNTL_3V_SOCKET 0x20u
|
||||
#define TI113X_DEVCNTL_INTR_MASK 0x06u
|
||||
#define TI113X_DEVCNTL_INTR_NONE 0x00u
|
||||
#define TI113X_DEVCNTL_INTR_ISA 0x02u
|
||||
#define TI113X_DEVCNTL_INTR_SERIAL 0x04u
|
||||
/* TI112X specific code */
|
||||
#define TI12XX_DEVCNTL_INTR_ALLSERIAL 0x06u
|
||||
/* Texas Instruments PCI-1130/1131 CardBus Controller */
|
||||
#define TI113X_ExCA_IO_OFFSET0 0x36 /* Offset of I/O window */
|
||||
#define TI113X_ExCA_IO_OFFSET1 0x38 /* Offset of I/O window */
|
||||
#define TI113X_ExCA_MEM_WINDOW_PAGE 0x3C /* Memory Window Page */
|
||||
|
||||
/* sanpei */
|
||||
|
||||
/* For Bridge Control register (CB_PCI_BRIDGE_CTRL) */
|
||||
#define CB_BCR_CB_RESET 0x0040
|
||||
#define CB_BCR_INT_EXCA 0x0080
|
||||
/* PCI Configuration Registers (common) */
|
||||
#define CB_PCI_VENDOR_ID 0x00 /* vendor ID */
|
||||
#define CB_PCI_DEVICE_ID 0x02 /* device ID */
|
||||
#define CB_PCI_COMMAND 0x04 /* PCI command */
|
||||
#define CB_PCI_STATUS 0x06 /* PCI status */
|
||||
#define CB_PCI_REVISION_ID 0x08 /* PCI revision ID */
|
||||
#define CB_PCI_CLASS 0x09 /* PCI class code */
|
||||
#define CB_PCI_CACHE_LINE_SIZE 0x0c /* Cache line size */
|
||||
#define CB_PCI_LATENCY 0x0d /* PCI latency timer */
|
||||
#define CB_PCI_HEADER_TYPE 0x0e /* PCI header type */
|
||||
#define CB_PCI_BIST 0x0f /* Built-in self test */
|
||||
#define CB_PCI_SOCKET_BASE 0x10 /* Socket/ExCA base address reg. */
|
||||
#define CB_PCI_CB_STATUS 0x16 /* CardBus Status */
|
||||
#define CB_PCI_PCI_BUS_NUM 0x18 /* PCI bus number */
|
||||
#define CB_PCI_CB_BUS_NUM 0x19 /* CardBus bus number */
|
||||
#define CB_PCI_CB_SUB_BUS_NUM 0x1A /* Subordinate CardBus bus number */
|
||||
#define CB_PCI_CB_LATENCY 0x1A /* CardBus latency timer */
|
||||
#define CB_PCI_MEMBASE0 0x1C /* Memory base register 0 */
|
||||
#define CB_PCI_MEMLIMIT0 0x20 /* Memory limit register 0 */
|
||||
#define CB_PCI_MEMBASE1 0x24 /* Memory base register 1 */
|
||||
#define CB_PCI_MEMLIMIT1 0x28 /* Memory limit register 1 */
|
||||
#define CB_PCI_IOBASE0 0x2C /* I/O base register 0 */
|
||||
#define CB_PCI_IOLIMIT0 0x30 /* I/O limit register 0 */
|
||||
#define CB_PCI_IOBASE1 0x34 /* I/O base register 1 */
|
||||
#define CB_PCI_IOLIMIT1 0x38 /* I/O limit register 1 */
|
||||
#define CB_PCI_INT_LINE 0x3C /* Interrupt Line */
|
||||
#define CB_PCI_INT_PIN 0x3D /* Interrupt Pin */
|
||||
#define CB_PCI_BRIDGE_CTRL 0x3E /* Bridge Control */
|
||||
#define CB_PCI_SUBSYS_VENDOR_ID 0x40 /* Subsystem Vendor ID */
|
||||
#define CB_PCI_SUBSYS_ID 0x42 /* Subsystem ID */
|
||||
#define CB_PCI_LEGACY16_IOADDR 0x44 /* Legacy 16bit I/O address */
|
||||
|
||||
190
sys/pci/pcic_p.c
190
sys/pci/pcic_p.c
@ -32,6 +32,7 @@
|
||||
#include <sys/param.h>
|
||||
#include <sys/kernel.h>
|
||||
#include <sys/systm.h>
|
||||
#include <sys/malloc.h>
|
||||
#include <sys/bus.h>
|
||||
#include <pci/pcireg.h>
|
||||
#include <pci/pcivar.h>
|
||||
@ -40,12 +41,14 @@
|
||||
#include <vm/vm.h>
|
||||
#include <vm/pmap.h>
|
||||
|
||||
#define PRVERB(x) if (bootverbose) device_printf x
|
||||
|
||||
/*
|
||||
* Set up the CL-PD6832 to look like a ISA based PCMCIA chip (a
|
||||
* PD672X). This routine is called once per PCMCIA socket.
|
||||
*/
|
||||
static void
|
||||
pd6832_legacy_init(device_t self)
|
||||
pd6832_legacy_init(device_t dev)
|
||||
{
|
||||
u_long bcr; /* to set interrupts */
|
||||
u_short io_port; /* the io_port to map this slot on */
|
||||
@ -53,7 +56,8 @@ pd6832_legacy_init(device_t self)
|
||||
int unit;
|
||||
|
||||
num6832 = 0;
|
||||
unit = device_get_unit(self);
|
||||
unit = device_get_unit(dev);
|
||||
|
||||
/*
|
||||
* Some BIOS leave the legacy address uninitialized. This
|
||||
* insures that the PD6832 puts itself where the driver will
|
||||
@ -63,15 +67,15 @@ pd6832_legacy_init(device_t self)
|
||||
*/
|
||||
io_port = PCIC_INDEX_0 + num6832 * CLPD6832_NUM_REGS;
|
||||
if (unit == 0)
|
||||
pci_write_config(self, CLPD6832_LEGACY_16BIT_IOADDR,
|
||||
io_port & ~PCI_MAP_IO, 4);
|
||||
pci_write_config(dev, CLPD6832_LEGACY_16BIT_IOADDR,
|
||||
io_port & ~PCI_MAP_IO, 4);
|
||||
|
||||
/*
|
||||
* I think this should be a call to pci_map_port, but that
|
||||
* routine won't map regiaters above 0x28, and the register we
|
||||
* need to map is 0x44.
|
||||
*/
|
||||
io_port = pci_read_config(self, CLPD6832_LEGACY_16BIT_IOADDR, 4) &
|
||||
io_port = pci_read_config(dev, CLPD6832_LEGACY_16BIT_IOADDR, 4) &
|
||||
~PCI_MAP_IO;
|
||||
|
||||
/*
|
||||
@ -79,49 +83,148 @@ pd6832_legacy_init(device_t self)
|
||||
* words and deactivate the second by setting the limit lower
|
||||
* than the base.
|
||||
*/
|
||||
pci_write_config(self, CLPD6832_IO_BASE0, io_port | 1, 4);
|
||||
pci_write_config(self, CLPD6832_IO_LIMIT0,
|
||||
(io_port + CLPD6832_NUM_REGS) | 1, 4);
|
||||
pci_write_config(dev, CLPD6832_IO_BASE0, io_port | 1, 4);
|
||||
pci_write_config(dev, CLPD6832_IO_LIMIT0,
|
||||
(io_port + CLPD6832_NUM_REGS) | 1, 4);
|
||||
|
||||
pci_write_config(self, CLPD6832_IO_BASE1, (io_port + 0x20) | 1, 4);
|
||||
pci_write_config(self, CLPD6832_IO_LIMIT1, io_port | 1, 4);
|
||||
pci_write_config(dev, CLPD6832_IO_BASE1, (io_port + 0x20) | 1, 4);
|
||||
pci_write_config(dev, CLPD6832_IO_LIMIT1, io_port | 1, 4);
|
||||
|
||||
/*
|
||||
* Set default operating mode (I/O port space) and allocate
|
||||
* this socket to the current unit.
|
||||
*/
|
||||
pci_write_config(self, PCI_COMMAND_STATUS_REG,
|
||||
CLPD6832_COMMAND_DEFAULTS, 4);
|
||||
pci_write_config(self, CLPD6832_SOCKET, unit, 4);
|
||||
pci_write_config(dev, PCI_COMMAND_STATUS_REG,
|
||||
CLPD6832_COMMAND_DEFAULTS, 4);
|
||||
pci_write_config(dev, CLPD6832_SOCKET, unit, 4);
|
||||
|
||||
/*
|
||||
* Set up the card inserted/card removed interrupts to come
|
||||
* through the isa IRQ.
|
||||
*/
|
||||
bcr = pci_read_config(self, CLPD6832_BRIDGE_CONTROL, 4);
|
||||
bcr = pci_read_config(dev, CLPD6832_BRIDGE_CONTROL, 4);
|
||||
bcr |= (CLPD6832_BCR_ISA_IRQ|CLPD6832_BCR_MGMT_IRQ_ENA);
|
||||
pci_write_config(self, CLPD6832_BRIDGE_CONTROL, bcr, 4);
|
||||
pci_write_config(dev, CLPD6832_BRIDGE_CONTROL, bcr, 4);
|
||||
|
||||
/* After initializing 2 sockets, the chip is fully configured */
|
||||
if (unit == 1)
|
||||
num6832++;
|
||||
|
||||
if (bootverbose)
|
||||
printf("CardBus: Legacy PC-card 16bit I/O address [0x%x]\n",
|
||||
io_port);
|
||||
PRVERB((dev, "CardBus: Legacy PC-card 16bit I/O address [0x%x]\n",
|
||||
io_port));
|
||||
}
|
||||
|
||||
/*
|
||||
* TI1XXX PCI-CardBus Host Adapter specific function code.
|
||||
* This function is separated from pcic_pci_attach().
|
||||
* Support Device: TI1130,TI1131,TI1250,TI1220.
|
||||
* Test Device: TI1221.
|
||||
* Takeshi Shibagaki(shiba@jp.freebsd.org).
|
||||
*/
|
||||
static void
|
||||
ti1xxx_pci_init(device_t dev)
|
||||
{
|
||||
u_long syscntl,devcntl,cardcntl;
|
||||
u_int32_t device_id = pci_get_devid(dev);
|
||||
char buf[128];
|
||||
int ti113x = (device_id == PCI_DEVICE_ID_PCIC_TI1130)
|
||||
|| (device_id == PCI_DEVICE_ID_PCIC_TI1131);
|
||||
|
||||
syscntl = pci_read_config(dev, TI113X_PCI_SYSTEM_CONTROL, 4);
|
||||
devcntl = pci_read_config(dev, TI113X_PCI_DEVICE_CONTROL, 1);
|
||||
cardcntl = pci_read_config(dev, TI113X_PCI_CARD_CONTROL, 1);
|
||||
|
||||
switch(ti113x){
|
||||
case 0 :
|
||||
strcpy(buf, "TI12XX PCI Config Reg: ");
|
||||
break;
|
||||
case 1 :
|
||||
strcpy(buf, "TI113X PCI Config Reg: ");
|
||||
/*
|
||||
* Defalut card control register setting is
|
||||
* PCI interrupt. The method of this code
|
||||
* switches PCI INT and ISA IRQ by bit 7 of
|
||||
* Bridge Control Register(Offset:0x3e,0x13e).
|
||||
* Takeshi Shibagaki(shiba@jp.freebsd.org)
|
||||
*/
|
||||
cardcntl |= TI113X_CARDCNTL_PCI_IREQ;
|
||||
cardcntl |= TI113X_CARDCNTL_PCI_CSC;
|
||||
if (syscntl & TI113X_SYSCNTL_CLKRUN_ENA){
|
||||
if (syscntl & TI113X_SYSCNTL_CLKRUN_SEL)
|
||||
strcat(buf, "[clkrun irq 12]");
|
||||
else
|
||||
strcat(buf, "[clkrun irq 10]");
|
||||
}
|
||||
break;
|
||||
}
|
||||
if (cardcntl & TI113X_CARDCNTL_RING_ENA)
|
||||
strcat(buf, "[ring enable]");
|
||||
if (cardcntl & TI113X_CARDCNTL_SPKR_ENA)
|
||||
strcat(buf, "[speaker enable]");
|
||||
if (syscntl & TI113X_SYSCNTL_PWRSAVINGS)
|
||||
strcat(buf, "[pwr save]");
|
||||
switch(devcntl & TI113X_DEVCNTL_INTR_MASK){
|
||||
case TI113X_DEVCNTL_INTR_ISA :
|
||||
strcat(buf, "[CSC parallel isa irq]");
|
||||
break;
|
||||
case TI113X_DEVCNTL_INTR_SERIAL :
|
||||
strcat(buf, "[CSC serial isa irq]");
|
||||
break;
|
||||
case TI113X_DEVCNTL_INTR_NONE :
|
||||
strcat(buf, "[pci only]");
|
||||
break;
|
||||
case TI12XX_DEVCNTL_INTR_ALLSERIAL :
|
||||
strcat(buf, "[FUNC pci int + CSC serial isa irq]");
|
||||
break;
|
||||
}
|
||||
pci_write_config(dev, TI113X_PCI_CARD_CONTROL, cardcntl, 1);
|
||||
if (ti113x)
|
||||
cardcntl = pci_read_config(dev, TI113X_PCI_CARD_CONTROL, 1);
|
||||
device_printf(dev, "%s\n",buf);
|
||||
}
|
||||
|
||||
static void
|
||||
generic_cardbus_attach(device_t dev)
|
||||
{
|
||||
u_int16_t brgcntl;
|
||||
u_int32_t iobase;
|
||||
int unit;
|
||||
|
||||
unit = device_get_unit(dev);
|
||||
|
||||
/* Output ISA IRQ indicated in ExCA register(0x03). */
|
||||
brgcntl = pci_read_config(dev, CB_PCI_BRIDGE_CTRL, 2);
|
||||
brgcntl |= CB_BCR_INT_EXCA;
|
||||
pci_write_config(dev, CB_PCI_BRIDGE_CTRL, brgcntl, 2);
|
||||
|
||||
/* 16bit Legacy Mode Base Address */
|
||||
if (unit != 0)
|
||||
return;
|
||||
|
||||
iobase = pci_read_config(dev, CB_PCI_LEGACY16_IOADDR, 2)
|
||||
& ~PCI_MAP_IO;
|
||||
if (!iobase) {
|
||||
iobase = 0x3e0 | PCI_MAP_IO;
|
||||
pci_write_config(dev, CB_PCI_LEGACY16_IOADDR, iobase, 2);
|
||||
iobase = pci_read_config(dev, CB_PCI_LEGACY16_IOADDR, 2)
|
||||
& ~PCI_MAP_IO;
|
||||
}
|
||||
PRVERB((dev, "Legacy address set to %#x\n", iobase));
|
||||
return;
|
||||
}
|
||||
|
||||
|
||||
/*
|
||||
* Return the ID string for the controller if the vendor/product id
|
||||
* matches, NULL otherwise.
|
||||
*/
|
||||
static int
|
||||
pcic_pci_probe(device_t self)
|
||||
pcic_pci_probe(device_t dev)
|
||||
{
|
||||
u_int32_t device_id;
|
||||
char *desc;
|
||||
|
||||
device_id = pci_get_devid(self);
|
||||
device_id = pci_get_devid(dev);
|
||||
desc = NULL;
|
||||
|
||||
switch (device_id) {
|
||||
@ -182,6 +285,7 @@ pcic_pci_probe(device_t self)
|
||||
case PCI_DEVICE_ID_RICOH_RL5C478:
|
||||
desc = "Ricoh RL5C478 PCI-CardBus Bridge";
|
||||
break;
|
||||
|
||||
/* 16bit PC-card bridges */
|
||||
case PCI_DEVICE_ID_PCIC_CLPD6729:
|
||||
desc = "Cirrus Logic PD6729/6730 PC-Card Controller";
|
||||
@ -200,7 +304,7 @@ pcic_pci_probe(device_t self)
|
||||
if (desc == NULL)
|
||||
return (ENXIO);
|
||||
|
||||
device_set_desc(self, desc);
|
||||
device_set_desc(dev, desc);
|
||||
return 0; /* exact match */
|
||||
}
|
||||
|
||||
@ -210,13 +314,44 @@ pcic_pci_probe(device_t self)
|
||||
* it only understands the CL-PD6832.
|
||||
*/
|
||||
static int
|
||||
pcic_pci_attach(device_t self)
|
||||
pcic_pci_attach(device_t dev)
|
||||
{
|
||||
u_int32_t device_id = pci_get_devid(self);
|
||||
u_int32_t device_id = pci_get_devid(dev);
|
||||
u_long command;
|
||||
|
||||
/* Init. CardBus/PC-card controllers as 16-bit PC-card controllers */
|
||||
|
||||
/* Place any per "slot" initialization here */
|
||||
|
||||
/*
|
||||
* In sys/pci/pcireg.h, PCI_COMMAND_STATUS_REG must be separated
|
||||
* PCI_COMMAND_REG(0x04) and PCI_STATUS_REG(0x06).
|
||||
* Takeshi Shibagaki(shiba@jp.freebsd.org).
|
||||
*/
|
||||
command = pci_read_config(dev, PCI_COMMAND_STATUS_REG, 4);
|
||||
command |= PCI_COMMAND_IO_ENABLE | PCI_COMMAND_MEM_ENABLE;
|
||||
pci_write_config(dev, PCI_COMMAND_STATUS_REG, command, 4);
|
||||
|
||||
switch (device_id) {
|
||||
case PCI_DEVICE_ID_PCIC_TI1130:
|
||||
case PCI_DEVICE_ID_PCIC_TI1131:
|
||||
case PCI_DEVICE_ID_PCIC_TI1220:
|
||||
case PCI_DEVICE_ID_PCIC_TI1221:
|
||||
case PCI_DEVICE_ID_PCIC_TI1250:
|
||||
case PCI_DEVICE_ID_PCIC_TI1251:
|
||||
case PCI_DEVICE_ID_PCIC_TI1251B:
|
||||
case PCI_DEVICE_ID_PCIC_TI1225:
|
||||
case PCI_DEVICE_ID_PCIC_TI1410:
|
||||
case PCI_DEVICE_ID_PCIC_TI1420:
|
||||
case PCI_DEVICE_ID_PCIC_TI1450:
|
||||
case PCI_DEVICE_ID_PCIC_TI1451:
|
||||
ti1xxx_pci_init(dev);
|
||||
/* FALLTHROUGH */
|
||||
default:
|
||||
generic_cardbus_attach(dev);
|
||||
break;
|
||||
case PCI_DEVICE_ID_PCIC_CLPD6832:
|
||||
pd6832_legacy_init(self);
|
||||
pd6832_legacy_init(dev);
|
||||
break;
|
||||
}
|
||||
|
||||
@ -229,10 +364,10 @@ pcic_pci_attach(device_t self)
|
||||
for (j = 0; j < 0x98; j += 16) {
|
||||
printf("%02x: ", j);
|
||||
for (i = 0; i < 16; i += 4)
|
||||
printf(" %08x", pci_read_config(self, i+j, 4));
|
||||
printf(" %08x", pci_read_config(dev, i+j, 4));
|
||||
printf("\n");
|
||||
}
|
||||
p = (u_char *)pmap_mapdev(pci_read_config(self, 0x10, 4),
|
||||
p = (u_char *)pmap_mapdev(pci_read_config(dev, 0x10, 4),
|
||||
0x1000);
|
||||
pl = (u_long *)p;
|
||||
printf("Cardbus Socket registers:\n");
|
||||
@ -247,10 +382,9 @@ pcic_pci_attach(device_t self)
|
||||
printf("%02x: %16D\n", i, p + 0x800 + i, " ");
|
||||
}
|
||||
|
||||
return 0; /* no error */
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
||||
static device_method_t pcic_pci_methods[] = {
|
||||
/* Device interface */
|
||||
DEVMETHOD(device_probe, pcic_pci_probe),
|
||||
|
||||
@ -69,3 +69,82 @@
|
||||
#define CLPD6832_NUM_REGS 2
|
||||
|
||||
/* End of CL-PD6832 defines */
|
||||
/* Texas Instruments PCI-1130/1131 CardBus Controller */
|
||||
#define TI113X_PCI_SYSTEM_CONTROL 0x80 /* System Control */
|
||||
#define TI113X_PCI_RETRY_STATUS 0x90 /* Retry Status */
|
||||
#define TI113X_PCI_CARD_CONTROL 0x91 /* Card Control */
|
||||
#define TI113X_PCI_DEVICE_CONTROL 0x92 /* Device Control */
|
||||
#define TI113X_PCI_BUFFER_CONTROL 0x93 /* Buffer Control */
|
||||
#define TI113X_PCI_SOCKET_DMA0 0x94 /* Socket DMA Register 0 */
|
||||
#define TI113X_PCI_SOCKET_DMA1 0x98 /* Socket DMA Register 1 */
|
||||
|
||||
/* Card control register (TI113X_SYSTEM_CONTROL == 0x80) */
|
||||
#define TI113X_SYSCNTL_VCC_PROTECT 0x00200000u
|
||||
#define TI113X_SYSCNTL_CLKRUN_SEL 0x00000080u
|
||||
#define TI113X_SYSCNTL_PWRSAVINGS 0x00000040u
|
||||
#define TI113X_SYSCNTL_KEEP_CLK 0x00000002u
|
||||
#define TI113X_SYSCNTL_CLKRUN_ENA 0x00000001u
|
||||
|
||||
/* Card control register (TI113X_CARD_CONTROL == 0x91) */
|
||||
#define TI113X_CARDCNTL_RING_ENA 0x80u
|
||||
#define TI113X_CARDCNTL_ZOOM_VIDEO 0x40u
|
||||
#define TI113X_CARDCNTL_PCI_IRQ_ENA 0x20u
|
||||
#define TI113X_CARDCNTL_PCI_IREQ 0x10u
|
||||
#define TI113X_CARDCNTL_PCI_CSC 0x08u
|
||||
#define TI113X_CARDCNTL_MASK (TI113X_CARDCNTL_PCI_IRQ_ENA | TI113X_CARDCNTL_PCI_IREQ | TI113X_CARDCNTL_PCI_CSC)
|
||||
#define TI113X_FUNC0_VALID TI113X_CARDCNTL_MASK
|
||||
#define TI113X_FUNC1_VALID (TI113X_CARDCNTL_PCI_IREQ | TI113X_CARDCNTL_PCI_CSC)
|
||||
/* Reserved bit 0x04u */
|
||||
#define TI113X_CARDCNTL_SPKR_ENA 0x02u
|
||||
#define TI113X_CARDCNTL_INT 0x01u
|
||||
|
||||
/* Device control register (TI113X_DEVICE_CONTROL == 0x92) */
|
||||
#define TI113X_DEVCNTL_5V_SOCKET 0x40u
|
||||
#define TI113X_DEVCNTL_3V_SOCKET 0x20u
|
||||
#define TI113X_DEVCNTL_INTR_MASK 0x06u
|
||||
#define TI113X_DEVCNTL_INTR_NONE 0x00u
|
||||
#define TI113X_DEVCNTL_INTR_ISA 0x02u
|
||||
#define TI113X_DEVCNTL_INTR_SERIAL 0x04u
|
||||
/* TI112X specific code */
|
||||
#define TI12XX_DEVCNTL_INTR_ALLSERIAL 0x06u
|
||||
/* Texas Instruments PCI-1130/1131 CardBus Controller */
|
||||
#define TI113X_ExCA_IO_OFFSET0 0x36 /* Offset of I/O window */
|
||||
#define TI113X_ExCA_IO_OFFSET1 0x38 /* Offset of I/O window */
|
||||
#define TI113X_ExCA_MEM_WINDOW_PAGE 0x3C /* Memory Window Page */
|
||||
|
||||
/* sanpei */
|
||||
|
||||
/* For Bridge Control register (CB_PCI_BRIDGE_CTRL) */
|
||||
#define CB_BCR_CB_RESET 0x0040
|
||||
#define CB_BCR_INT_EXCA 0x0080
|
||||
/* PCI Configuration Registers (common) */
|
||||
#define CB_PCI_VENDOR_ID 0x00 /* vendor ID */
|
||||
#define CB_PCI_DEVICE_ID 0x02 /* device ID */
|
||||
#define CB_PCI_COMMAND 0x04 /* PCI command */
|
||||
#define CB_PCI_STATUS 0x06 /* PCI status */
|
||||
#define CB_PCI_REVISION_ID 0x08 /* PCI revision ID */
|
||||
#define CB_PCI_CLASS 0x09 /* PCI class code */
|
||||
#define CB_PCI_CACHE_LINE_SIZE 0x0c /* Cache line size */
|
||||
#define CB_PCI_LATENCY 0x0d /* PCI latency timer */
|
||||
#define CB_PCI_HEADER_TYPE 0x0e /* PCI header type */
|
||||
#define CB_PCI_BIST 0x0f /* Built-in self test */
|
||||
#define CB_PCI_SOCKET_BASE 0x10 /* Socket/ExCA base address reg. */
|
||||
#define CB_PCI_CB_STATUS 0x16 /* CardBus Status */
|
||||
#define CB_PCI_PCI_BUS_NUM 0x18 /* PCI bus number */
|
||||
#define CB_PCI_CB_BUS_NUM 0x19 /* CardBus bus number */
|
||||
#define CB_PCI_CB_SUB_BUS_NUM 0x1A /* Subordinate CardBus bus number */
|
||||
#define CB_PCI_CB_LATENCY 0x1A /* CardBus latency timer */
|
||||
#define CB_PCI_MEMBASE0 0x1C /* Memory base register 0 */
|
||||
#define CB_PCI_MEMLIMIT0 0x20 /* Memory limit register 0 */
|
||||
#define CB_PCI_MEMBASE1 0x24 /* Memory base register 1 */
|
||||
#define CB_PCI_MEMLIMIT1 0x28 /* Memory limit register 1 */
|
||||
#define CB_PCI_IOBASE0 0x2C /* I/O base register 0 */
|
||||
#define CB_PCI_IOLIMIT0 0x30 /* I/O limit register 0 */
|
||||
#define CB_PCI_IOBASE1 0x34 /* I/O base register 1 */
|
||||
#define CB_PCI_IOLIMIT1 0x38 /* I/O limit register 1 */
|
||||
#define CB_PCI_INT_LINE 0x3C /* Interrupt Line */
|
||||
#define CB_PCI_INT_PIN 0x3D /* Interrupt Pin */
|
||||
#define CB_PCI_BRIDGE_CTRL 0x3E /* Bridge Control */
|
||||
#define CB_PCI_SUBSYS_VENDOR_ID 0x40 /* Subsystem Vendor ID */
|
||||
#define CB_PCI_SUBSYS_ID 0x42 /* Subsystem ID */
|
||||
#define CB_PCI_LEGACY16_IOADDR 0x44 /* Legacy 16bit I/O address */
|
||||
|
||||
Loading…
Reference in New Issue
Block a user