mirror of
https://github.com/freebsd/freebsd-src.git
synced 2024-11-29 21:52:45 +00:00
Documented new serial console flags.
Removed dead serial console options. Reorganised sio and serial console options. Added undocumented options CLUSTERDEBUG and NPX_DEBUG.
This commit is contained in:
Bruce Evans
parent
9e5f720f5f
commit
9546766a1b
Notes:
svn2git
2020-12-20 02:59:44 +00:00
svn path=/head/; revision=24685
@ -2,7 +2,7 @@
|
||||
# LINT -- config file for checking all the sources, tries to pull in
|
||||
# as much of the source tree as it can.
|
||||
#
|
||||
# $Id: LINT,v 1.324 1997/03/26 17:46:03 ache Exp $
|
||||
# $Id: LINT,v 1.325 1997/03/29 11:06:58 phk Exp $
|
||||
#
|
||||
# NB: You probably don't want to try running a kernel built from this
|
||||
# file. Instead, you should start from GENERIC, and add options from
|
||||
@ -744,15 +744,31 @@ device psm0 at isa? port "IO_KBD" conflicts tty irq 12 vector psmintr
|
||||
# Options for psm:
|
||||
options PSM_CHECKSYNC #checks the header byte for sync.
|
||||
|
||||
device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr
|
||||
device sio0 at isa? port "IO_COM1" tty flags 0x10 irq 4 vector siointr
|
||||
|
||||
#
|
||||
# `flags' for serial drivers that support consoles (only for sio now):
|
||||
# 0x10 enable console support for this unit. The other console flags
|
||||
# are ignored unless this is set. Enabling console support does
|
||||
# not make the unit the preferred console - boot with -h or set
|
||||
# the 0x20 flag for that. Currently, at most one unit can have
|
||||
# console support; the first one (in config file order) with
|
||||
# this flag set is preferred. Setting this flag for sio0 gives
|
||||
# the old behaviour.
|
||||
# 0x20 force this unit to be the console (unless there is another
|
||||
# higher priority console). This replaces the COMCONSOLE option.
|
||||
# 0x40 reserve this unit for low level console operations. Do not
|
||||
#
|
||||
|
||||
# Options for serial drivers that support consoles (only for sio now):
|
||||
options BREAK_TO_DEBUGGER #a BREAK on a comconsole goes to
|
||||
#DDB, if available.
|
||||
options CONSPEED=115200 #speed for serial console (default 9600)
|
||||
|
||||
# Options for sio:
|
||||
options COMCONSOLE #prefer serial console to video console
|
||||
options COM_ESP #code for Hayes ESP
|
||||
options COM_MULTIPORT #code for some cards with shared IRQs
|
||||
options DSI_SOFT_MODEM #code for DSI Softmodems
|
||||
options BREAK_TO_DEBUGGER #a BREAK on a comconsole goes to
|
||||
#DDB, if available.
|
||||
|
||||
#
|
||||
# Network interfaces: `cx', `ed', `el', `ep', `ie', `is', `le', `lnc'
|
||||
@ -1075,6 +1091,7 @@ options GATEWAY
|
||||
options CLK_CALIBRATION_LOOP
|
||||
options "CLK_USE_I8254_CALIBRATION"
|
||||
options "CLK_USE_I586_CALIBRATION"
|
||||
options CLUSTERDEBUG
|
||||
options COMPAT_LINUX
|
||||
options DEBUG
|
||||
options DEVFS_ROOT
|
||||
@ -1094,6 +1111,7 @@ options MSGSSZ=16
|
||||
options MSGTQL=41
|
||||
options NBUF=512
|
||||
options NMBCLUSTERS=1024
|
||||
options NPX_DEBUG
|
||||
options PSM_ACCEL=1
|
||||
options PSM_DEBUG=1
|
||||
options PSM_EMULATION
|
||||
|
||||
@ -2,7 +2,7 @@
|
||||
# LINT -- config file for checking all the sources, tries to pull in
|
||||
# as much of the source tree as it can.
|
||||
#
|
||||
# $Id: LINT,v 1.324 1997/03/26 17:46:03 ache Exp $
|
||||
# $Id: LINT,v 1.325 1997/03/29 11:06:58 phk Exp $
|
||||
#
|
||||
# NB: You probably don't want to try running a kernel built from this
|
||||
# file. Instead, you should start from GENERIC, and add options from
|
||||
@ -744,15 +744,31 @@ device psm0 at isa? port "IO_KBD" conflicts tty irq 12 vector psmintr
|
||||
# Options for psm:
|
||||
options PSM_CHECKSYNC #checks the header byte for sync.
|
||||
|
||||
device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr
|
||||
device sio0 at isa? port "IO_COM1" tty flags 0x10 irq 4 vector siointr
|
||||
|
||||
#
|
||||
# `flags' for serial drivers that support consoles (only for sio now):
|
||||
# 0x10 enable console support for this unit. The other console flags
|
||||
# are ignored unless this is set. Enabling console support does
|
||||
# not make the unit the preferred console - boot with -h or set
|
||||
# the 0x20 flag for that. Currently, at most one unit can have
|
||||
# console support; the first one (in config file order) with
|
||||
# this flag set is preferred. Setting this flag for sio0 gives
|
||||
# the old behaviour.
|
||||
# 0x20 force this unit to be the console (unless there is another
|
||||
# higher priority console). This replaces the COMCONSOLE option.
|
||||
# 0x40 reserve this unit for low level console operations. Do not
|
||||
#
|
||||
|
||||
# Options for serial drivers that support consoles (only for sio now):
|
||||
options BREAK_TO_DEBUGGER #a BREAK on a comconsole goes to
|
||||
#DDB, if available.
|
||||
options CONSPEED=115200 #speed for serial console (default 9600)
|
||||
|
||||
# Options for sio:
|
||||
options COMCONSOLE #prefer serial console to video console
|
||||
options COM_ESP #code for Hayes ESP
|
||||
options COM_MULTIPORT #code for some cards with shared IRQs
|
||||
options DSI_SOFT_MODEM #code for DSI Softmodems
|
||||
options BREAK_TO_DEBUGGER #a BREAK on a comconsole goes to
|
||||
#DDB, if available.
|
||||
|
||||
#
|
||||
# Network interfaces: `cx', `ed', `el', `ep', `ie', `is', `le', `lnc'
|
||||
@ -1075,6 +1091,7 @@ options GATEWAY
|
||||
options CLK_CALIBRATION_LOOP
|
||||
options "CLK_USE_I8254_CALIBRATION"
|
||||
options "CLK_USE_I586_CALIBRATION"
|
||||
options CLUSTERDEBUG
|
||||
options COMPAT_LINUX
|
||||
options DEBUG
|
||||
options DEVFS_ROOT
|
||||
@ -1094,6 +1111,7 @@ options MSGSSZ=16
|
||||
options MSGTQL=41
|
||||
options NBUF=512
|
||||
options NMBCLUSTERS=1024
|
||||
options NPX_DEBUG
|
||||
options PSM_ACCEL=1
|
||||
options PSM_DEBUG=1
|
||||
options PSM_EMULATION
|
||||
|
||||
@ -2,7 +2,7 @@
|
||||
# LINT -- config file for checking all the sources, tries to pull in
|
||||
# as much of the source tree as it can.
|
||||
#
|
||||
# $Id: LINT,v 1.324 1997/03/26 17:46:03 ache Exp $
|
||||
# $Id: LINT,v 1.325 1997/03/29 11:06:58 phk Exp $
|
||||
#
|
||||
# NB: You probably don't want to try running a kernel built from this
|
||||
# file. Instead, you should start from GENERIC, and add options from
|
||||
@ -744,15 +744,31 @@ device psm0 at isa? port "IO_KBD" conflicts tty irq 12 vector psmintr
|
||||
# Options for psm:
|
||||
options PSM_CHECKSYNC #checks the header byte for sync.
|
||||
|
||||
device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr
|
||||
device sio0 at isa? port "IO_COM1" tty flags 0x10 irq 4 vector siointr
|
||||
|
||||
#
|
||||
# `flags' for serial drivers that support consoles (only for sio now):
|
||||
# 0x10 enable console support for this unit. The other console flags
|
||||
# are ignored unless this is set. Enabling console support does
|
||||
# not make the unit the preferred console - boot with -h or set
|
||||
# the 0x20 flag for that. Currently, at most one unit can have
|
||||
# console support; the first one (in config file order) with
|
||||
# this flag set is preferred. Setting this flag for sio0 gives
|
||||
# the old behaviour.
|
||||
# 0x20 force this unit to be the console (unless there is another
|
||||
# higher priority console). This replaces the COMCONSOLE option.
|
||||
# 0x40 reserve this unit for low level console operations. Do not
|
||||
#
|
||||
|
||||
# Options for serial drivers that support consoles (only for sio now):
|
||||
options BREAK_TO_DEBUGGER #a BREAK on a comconsole goes to
|
||||
#DDB, if available.
|
||||
options CONSPEED=115200 #speed for serial console (default 9600)
|
||||
|
||||
# Options for sio:
|
||||
options COMCONSOLE #prefer serial console to video console
|
||||
options COM_ESP #code for Hayes ESP
|
||||
options COM_MULTIPORT #code for some cards with shared IRQs
|
||||
options DSI_SOFT_MODEM #code for DSI Softmodems
|
||||
options BREAK_TO_DEBUGGER #a BREAK on a comconsole goes to
|
||||
#DDB, if available.
|
||||
|
||||
#
|
||||
# Network interfaces: `cx', `ed', `el', `ep', `ie', `is', `le', `lnc'
|
||||
@ -1075,6 +1091,7 @@ options GATEWAY
|
||||
options CLK_CALIBRATION_LOOP
|
||||
options "CLK_USE_I8254_CALIBRATION"
|
||||
options "CLK_USE_I586_CALIBRATION"
|
||||
options CLUSTERDEBUG
|
||||
options COMPAT_LINUX
|
||||
options DEBUG
|
||||
options DEVFS_ROOT
|
||||
@ -1094,6 +1111,7 @@ options MSGSSZ=16
|
||||
options MSGTQL=41
|
||||
options NBUF=512
|
||||
options NMBCLUSTERS=1024
|
||||
options NPX_DEBUG
|
||||
options PSM_ACCEL=1
|
||||
options PSM_DEBUG=1
|
||||
options PSM_EMULATION
|
||||
|
||||
Loading…
Reference in New Issue
Block a user