mirror of
https://github.com/freebsd/freebsd-src.git
synced 2024-12-02 04:13:39 +00:00
Some very small tweaks to hardware.hlp.
Submitted by: joerg & jkh
This commit is contained in:
Jordan K. Hubbard
parent
abb91fd6e4
commit
99404406dc
Notes:
svn2git
2020-12-20 02:59:44 +00:00
svn path=/head/; revision=9183
@ -1,4 +1,4 @@
|
||||
Hardware Documentation Guide: $Id: hardware.hlp,v 1.10 1995/06/09 08:29:16 jkh Exp $
|
||||
Hardware Documentation Guide: $Id: hardware.hlp,v 1.11 1995/06/09 13:29:19 jkh Exp $
|
||||
|
||||
Table of Contents
|
||||
-----------------
|
||||
@ -84,8 +84,8 @@ settings for all the drivers present in the booted kernel, and
|
||||
once you have located an entry of interest you may use the displayed
|
||||
device name to change its settings or even disable the driver completely.
|
||||
|
||||
For example, to change the address of network adapter 'ed0' to the
|
||||
address 0xd4000, you would type
|
||||
For example, to change the memory address of network adapter 'ed0' to
|
||||
the address 0xd4000, you would type
|
||||
|
||||
config> iomem ed0 0xd4000
|
||||
-----------------
|
||||
@ -128,7 +128,7 @@ disable any device that resides at the same port or IRQ as a device
|
||||
you actually have!
|
||||
|
||||
You can also remove drivers that are not needed by building yourself a
|
||||
custom kernel that contains only the device deviers which your system
|
||||
custom kernel that contains only the device drivers which your system
|
||||
really needs (see section 6.0 of the FreeBSD.FAQ). If your system has
|
||||
sufficient free disk space to store and compile the kernel sources,
|
||||
this is the option we most highly recommend.
|
||||
@ -145,7 +145,7 @@ placed on your computer during the FreeBSD installation process.
|
||||
installation floppy diskettes.)
|
||||
|
||||
The table describes the various parameters used by the driver to communicate
|
||||
with the hardware in your system. There are four parameters in the
|
||||
with the hardware in your system. There are four parameters in the
|
||||
table, but not all are used by each device. They are:
|
||||
|
||||
Port the starting I/O port used by the device, shown in hexadecimal.
|
||||
@ -228,7 +228,7 @@ zp0 300 10 dyn d8000 3Com PCMCIA Etherlink III
|
||||
|
||||
If the hardware in your computer is not set to the same settings as
|
||||
those shown in this table and the item is not marked 'dyn', you will
|
||||
have to either reconfigure your hardware, or use UserConfig ('-c boot
|
||||
have to either reconfigure your hardware, or use UserConfig ('-c' boot
|
||||
option) to reconfigure the kernel to match the way your hardware is
|
||||
currently set (see section 1.0).
|
||||
|
||||
@ -275,7 +275,7 @@ mss: Microsoft Sound System
|
||||
nic: Dr Neuhaus NICCY 3008, 3009 & 5000 ISDN cards
|
||||
opl: Yamaha OPL-2 and OPL-3 FM - SB, SB Pro, SB 16, ProAudioSpectrum
|
||||
pas: ProAudioSpectrum PCM and MIDI
|
||||
pca: PCM audio through your PC speaker
|
||||
pca: PCM audio ("/dev/audio") through your PC speaker
|
||||
psm: PS/2 mouse port
|
||||
rc: RISCom/8 multiport card
|
||||
sb: SoundBlaster PCM - SoundBlaster, SB Pro, SB16, ProAudioSpectrum
|
||||
@ -323,7 +323,7 @@ A: Your card is probably on a different IRQ from what is specified in the
|
||||
|
||||
|
||||
Q: I go to boot from the hard disk for the first time after installing
|
||||
FreeBSD, but the Boot Manger prompt just prints `F?' and the boot menu
|
||||
FreeBSD, but the Boot Manager prompt just prints `F?' at the boot menu
|
||||
each time but the boot won't go any further.
|
||||
|
||||
A: The hard disk geometry was set incorrectly in the Partition editor when
|
||||
|
||||
@ -1,4 +1,4 @@
|
||||
Hardware Documentation Guide: $Id: hardware.hlp,v 1.10 1995/06/09 08:29:16 jkh Exp $
|
||||
Hardware Documentation Guide: $Id: hardware.hlp,v 1.11 1995/06/09 13:29:19 jkh Exp $
|
||||
|
||||
Table of Contents
|
||||
-----------------
|
||||
@ -84,8 +84,8 @@ settings for all the drivers present in the booted kernel, and
|
||||
once you have located an entry of interest you may use the displayed
|
||||
device name to change its settings or even disable the driver completely.
|
||||
|
||||
For example, to change the address of network adapter 'ed0' to the
|
||||
address 0xd4000, you would type
|
||||
For example, to change the memory address of network adapter 'ed0' to
|
||||
the address 0xd4000, you would type
|
||||
|
||||
config> iomem ed0 0xd4000
|
||||
-----------------
|
||||
@ -128,7 +128,7 @@ disable any device that resides at the same port or IRQ as a device
|
||||
you actually have!
|
||||
|
||||
You can also remove drivers that are not needed by building yourself a
|
||||
custom kernel that contains only the device deviers which your system
|
||||
custom kernel that contains only the device drivers which your system
|
||||
really needs (see section 6.0 of the FreeBSD.FAQ). If your system has
|
||||
sufficient free disk space to store and compile the kernel sources,
|
||||
this is the option we most highly recommend.
|
||||
@ -145,7 +145,7 @@ placed on your computer during the FreeBSD installation process.
|
||||
installation floppy diskettes.)
|
||||
|
||||
The table describes the various parameters used by the driver to communicate
|
||||
with the hardware in your system. There are four parameters in the
|
||||
with the hardware in your system. There are four parameters in the
|
||||
table, but not all are used by each device. They are:
|
||||
|
||||
Port the starting I/O port used by the device, shown in hexadecimal.
|
||||
@ -228,7 +228,7 @@ zp0 300 10 dyn d8000 3Com PCMCIA Etherlink III
|
||||
|
||||
If the hardware in your computer is not set to the same settings as
|
||||
those shown in this table and the item is not marked 'dyn', you will
|
||||
have to either reconfigure your hardware, or use UserConfig ('-c boot
|
||||
have to either reconfigure your hardware, or use UserConfig ('-c' boot
|
||||
option) to reconfigure the kernel to match the way your hardware is
|
||||
currently set (see section 1.0).
|
||||
|
||||
@ -275,7 +275,7 @@ mss: Microsoft Sound System
|
||||
nic: Dr Neuhaus NICCY 3008, 3009 & 5000 ISDN cards
|
||||
opl: Yamaha OPL-2 and OPL-3 FM - SB, SB Pro, SB 16, ProAudioSpectrum
|
||||
pas: ProAudioSpectrum PCM and MIDI
|
||||
pca: PCM audio through your PC speaker
|
||||
pca: PCM audio ("/dev/audio") through your PC speaker
|
||||
psm: PS/2 mouse port
|
||||
rc: RISCom/8 multiport card
|
||||
sb: SoundBlaster PCM - SoundBlaster, SB Pro, SB16, ProAudioSpectrum
|
||||
@ -323,7 +323,7 @@ A: Your card is probably on a different IRQ from what is specified in the
|
||||
|
||||
|
||||
Q: I go to boot from the hard disk for the first time after installing
|
||||
FreeBSD, but the Boot Manger prompt just prints `F?' and the boot menu
|
||||
FreeBSD, but the Boot Manager prompt just prints `F?' at the boot menu
|
||||
each time but the boot won't go any further.
|
||||
|
||||
A: The hard disk geometry was set incorrectly in the Partition editor when
|
||||
|
||||
Loading…
Reference in New Issue
Block a user