Checks basic forward to local address, also with presence of
a listener that matches original port (see aab8c844b9). Based
on non-ATF test case written by Pavel Polyakov.
Reviewed by: kp, melifaro
Differential revision: https://reviews.freebsd.org/D37960
* Separate interface creation from interface modification code
* Support setting some interface attributes (ifdescr, mtu, up/down, promisc)
* Improve interaction with the cloners requiring to parse/write custom
interface attributes
* Add bitmask-based way of checking if the attribute is present in the
message
* Don't use multipart RTM_GETLINK replies when searching for the
specific interface names
* Use ENODEV instead of ENOENT in case of failed RTM_GETLINK search
* Add python netlink test helpers
* Add some netlink interface tests
Differential Revision: https://reviews.freebsd.org/D37668
This matches other mktemp implementations, including OpenBSD and GNU.
The -p option can be used to provide a tmpdir prefix for specified
templates. Precedence works out like so:
-t flag:
- $TMPDIR
- -p directory
- /tmp
Implied -t flag (no arguments or only -d flag):
- -p directory
- $TMPDIR
- /tmp
Some tests have been added for mktemp(1) in the process.
Reviewed by: imp (earlier version), wosch
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D37121
This commit brings back the driver from FreeBSD commit
f187d6dfbf plus subsequent fixes from
upstream.
Relative to upstream this commit includes a few other small fixes such
as additional INET and INET6 #ifdef's, #include cleanups, and updates
for recent API changes in main.
Reviewed by: pauamma, gbe, kevans, emaste
Obtained from: git@git.zx2c4.com:wireguard-freebsd @ 3cc22b2
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D36909
This should cover all of the basic functionality, as well as the recent
enhancement to use a dynamic buffer size rather than limiting patterns
and lines to MAXBSIZE.
Reviewed by: bapt
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D36324
Netlinks is a communication protocol currently used in Linux kernel to modify,
read and subscribe for nearly all networking state. Interfaces, addresses, routes,
firewall, fibs, vnets, etc are controlled via netlink.
It is async, TLV-based protocol, providing 1-1 and 1-many communications.
The current implementation supports the subset of NETLINK_ROUTE
family. To be more specific, the following is supported:
* Dumps:
- routes
- nexthops / nexthop groups
- interfaces
- interface addresses
- neighbors (arp/ndp)
* Notifications:
- interface arrival/departure
- interface address arrival/departure
- route addition/deletion
* Modifications:
- adding/deleting routes
- adding/deleting nexthops/nexthops groups
- adding/deleting neghbors
- adding/deleting interfaces (basic support only)
* Rtsock interaction
- route events are bridged both ways
The implementation also supports the NETLINK_GENERIC family framework.
Implementation notes:
Netlink is implemented via loadable/unloadable kernel module,
not touching many kernel parts.
Each netlink socket uses dedicated taskqueue to support async operations
that can sleep, such as interface creation. All message processing is
performed within these taskqueues.
Compatibility:
Most of the Netlink data models specified above maps to FreeBSD concepts
nicely. Unmodified ip(8) binary correctly works with
interfaces, addresses, routes, nexthops and nexthop groups. Some
software such as net/bird require header-only modifications to compile
and work with FreeBSD netlink.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D36002
MFC after: 2 months
/usr/share/zoneinfo/SystemV is removed via ObsoleteFiles as of commits
da038df8c9 and 57338837ae, so do not create it in the first place.
PR: 266666
Fixes: da038df8c9 ("share/zoneinfo: don't build obsolete...")
MFC after: 3 days
Users with a tmpfs /var/run will lose the directory tree state of
/var/run at reboot. This rc script will optionally (by default)
capture the state of the directory structure in /var/run prior to
shutdown and recreate it at system boot.
Alternatively a user can save the state of the /var/run directories
manually using service var_run save and disable the autosaving of
/var/run state using the var_run_autosave variable, for those
paranoid SSD users.
PR: 259585, 259699
Reported by: freebsd@walstatt-de.de,
Reviewed by: philip, gbe (previous version)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D36386
The default ones are install them to /usr/libdata/pkgconfig, and we can't
use this path for compat libraries, so we use /usr/lib<suffix>/pkgconfigi here.
Test Plan: grep -rn libdir= ./usr/lib32/pkgconfig/*.pc
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D34939
This change adds 2 tests to make sure that the *_oomprotect variable
sets the protection against OOM killer properly within rc(8) scripts.
This is also adding the first tests for the rc(8) framework. More tests
will be added as we go.
PR: 256148
Approved by: des
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D35745
Set up an OpenVPN tunnel between two jails, send traffic through them to
confirm basic function.
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D35067
Move pytest wrapper to the collection of the other atf wrappers
in libexec. It solves the problem of combining bits & pieces from
bsd.test.mk and bgs.prog.mk to address "test binary, but not the
suite binary".
Reviewed by: kp
Differential Revision: https://reviews.freebsd.org/D35604
MFC after: 2 weeks
I completely forgot about updating the generated llvm-project config
files, which also contain version numbers, etc. Sorry for the churn.
PR: 261742
Fixes: ab9d54731f
MFC after: 3 days
Some of the sanitizers from compiler-rt can use ignore lists, which are
loosely modeled on valgrind's example. Upstream provides default lists
for AddressSanitizer, CFI, and MemorySanitizer, so install these in the
expected location, /usr/lib/clang/14.0.3/share.
Reviewed by: emaste
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D35338
The program will be installed as bintrans, uuencode, uudecode,
b64encode, and b64decode and will be responsible for running the coders
according to their historical behavior.
Additionally, bintrans will be able to take a parameter designating
the coder and accept all its options in this form:
bintrans <coder> [options]
and the behavior should be the same as if
<coder> [options]
was invoked.
This has the advantage that adding coders won't require installing them
as binaries.
Move uudecode files to uuencode since the latter is the one that
provides the manual page.
Reviewed by: delphij (previous version)
Differential Revision: https://reviews.freebsd.org/D32943
The gunion(8) utility is used to track changes to a read-only disk on
a writable disk. Logically, a writable disk is placed over a read-only
disk. Write requests are intercepted and stored on the writable
disk. Read requests are first checked to see if they have been
written on the top (writable disk) and if found are returned. If
they have not been written on the top disk, then they are read from
the lower disk.
The gunion(8) utility can be especially useful if you have a large
disk with a corrupted filesystem that you are unsure of how to
repair. You can use gunion(8) to place another disk over the corrupted
disk and then attempt to repair the filesystem. If the repair fails,
you can revert all the changes in the upper disk and be back to the
unchanged state of the lower disk thus allowing you to try another
approach to repairing it. If the repair is successful you can commit
all the writes recorded on the top disk to the lower disk.
Another use of the gunion(8) utility is to try out upgrades to your
system. Place the upper disk over the disk holding your filesystem
that is to be upgraded and then run the upgrade on it. If it works,
commit it; if it fails, revert the upgrade.
Further details can be found in the gunion(8) manual page.
Reviewed by: Chuck Silvers, kib (earlier version)
tested by: Peter Holm
Differential Revision: https://reviews.freebsd.org/D32697
This could be done better by making each test a separate ATF test case.
This exercise is left for the reader.
Reviewed by: delphij (earlier version)
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D34303
NetBSD has an ATF test for newfs_msdos. Connect it to the build.
Adapt it for FreeBSD. This would have caught the bug fixed by my
previous commit.
Reviewed by: delphij, emaste
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D34116
Part two: Append bhyve -K option for specified keyboard layout
with layout setting files every languages.
Since the cmd option '-k' was used in the meantime
it was changed to '-K'
PR: 246121
Submitted by: koinec@yahoo.co.jp
Reviewed by: grehan@
Differential Revision: https://reviews.freebsd.org/D29473
MFC after: 4 weeks
And put the mtree binary and files in it.
Useful to create small mfsroot using /etc/rc.d/var without
having to install FreeBSD-utilities.
MFC after: 2 weeks
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D33442
bsddialog is an attempt to write in permissive license a replacement for
libdialog.
While it is still in early stage it is good enough to already be used in
many areas, it is imported as private lib until it matures enough to be
considered as having a stable ABI
This updates llvm, clang, compiler-rt, libc++, libunwind, lld, lldb and
openmp to llvmorg-13-init-16847-g88e66fa60ae5, the last commit before
the upstream release/13.x branch was created.
PR: 258209
MFC after: 2 weeks
Upstream one-true-awk has two sets of tests. These are in addition to
NetBSD's tests we're using. The 'bugs-fixed' tests from upstream are
ready to use as-is (more or less). However, the 'tests' from upstream
are not, so for now we'll just use the netbsd and bugs-fixed tests.
They provide an OK workout and are better than nothing, though the tests
themselves are for specific esoteric things.
The upstream bugs-fixed tests are *ALMOST* a drop in. However, 3 test
for errors and the upstream test jig mashes stdout and stderr together,
which atf doesn't do, so make a tiny tweak to the upstream tests that I
hope to upstream. Plus upstream has ../a.out: instead of awk: in the
output. Not sure how to deal with this yet, so I've not proposed
anything upstream and have changed the test locally.
In addition, the system-status.awk test is not suitable to run in ATF.
It wants to force sh to dump core, but kyua doesn't seem to allow that
sometimes so the test will fail or pass based on whether or not a core
dump can be created. Since it's unstable, remove it.
This required moving the netbsd tests to a new direcotry, so update
mtree files as well. The change is useless for 'make check' without it.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D31376
Using /etc/jail.{jailname}.conf is nice, however it makes /etc/ very
messy if you have many jails. This patch allows one to move these
config files out of the way into /etc/jail.conf.d/{jailname}.conf.
Note that the same caveat as /etc/jail.*.conf applies: the jail service
will not autodiscover all of these for starting 'all' jails. This is
considered future work, since the behavior matches.
Reviewed by: kevans
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D24570
Add a credential to the cdev object in sysctl_vmm_create(), then check
that we have the correct credentials in sysctl_vmm_destroy(). This
prevents a process in one jail from opening or destroying the /dev/vmm
file corresponding to a VM in a sibling jail.
Add regression tests.
Reviewed by: jhb, markj
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D31156
The framework knows how to create directories and tag them properly
for a the creation of a mtree, not need to hardcode all the locales
entries in bsd.usr.mk
This simplifies addition of new locales but also allow people building
with WITHOUT_LOCALES to end up with a directory full of empty files
From the zpool_influxdb.8 manual page:
zpool_influxdb produces InfluxDB-line-protocol-compatible metrics from
zpools. Like the zpool command, zpool_influxdb reads the current pool
status and statistics. Unlike the zpool command which is intended for
humans, zpool_influxdb formats the output in the InfluxDB line protocol.
The expected use is as a plugin to a metrics collector or aggregator,
such as Telegraf.
zpool_influxdb is installed into /usr/libexec/zfs/
Differential revision: https://reviews.freebsd.org/D31094
MFC after: 3 days
