Commit Graph

195 Commits

Author SHA1 Message Date
Peter Wemm
9b7a44a60e $Id$ -> $FreeBSD$ 1999-08-27 23:37:10 +00:00
Sheldon Hearn
b68adff6b7 Style clean-up:
* All variables are now embraced: ${foo}

	* All comparisons against some value now take the form:
	  [ "${foo}" ? "value" ]
	  where ? is a comparison operator

	* All empty string tests now take the form:
	  [ -z "${foo}" ]

	* All non-empty string tests now take the form:
	  [ -n "${foo}" ]

Submitted by:	jkh
1999-08-25 16:01:45 +00:00
Peter Wemm
b39c728a8d Perhaps I should have looked at the whole file rather than just the delta.
Use -eq rather than -ne.

Obtained from: OpenBSD (millert, etc/rc rev 1.104)
1999-08-06 06:22:43 +00:00
Peter Wemm
855f92eae0 I don't think `customify' is a real word. 1999-08-06 06:20:19 +00:00
Peter Wemm
f837ca75aa Don't use /tmp/_motd in the aftermath of the chflags(2) revelations.
Obtained from: OpenBSD (millert etc/rc rev 1.102 and hugh)
1999-08-06 06:16:06 +00:00
Warner Losh
3ee2311670 Clear flags on psuedo terminals before trying to chmod and chown them. 1999-08-02 05:42:44 +00:00
Sheldon Hearn
c99115f476 Don't allow users to prevent the updating of /etc/motd on machines for
which /tmp is not mounted in MFS, clear_tmp_enable="NO" and
update_motd="YES".

PR:	10005
Submitted by:	Anton Voronin <anton@urc.ac.ru>
1999-06-21 15:59:42 +00:00
Brian Somers
78adc7a560 Ignore the quota.user and quota.group files rather than the
``quotas'' file when cleaning /tmp.
1999-06-01 10:47:53 +00:00
Martin Cracauer
65089737f4 Break lines to be < 80 chars.
Submitted by:	BDE
1999-04-02 09:35:34 +00:00
Greg Lehey
6f16baa899 Add variable start_vinum. If set to YES, it will start vinum and
automagically find all the partitions.  This is to be preferred to the
somewhat emetic usage of vinum_slices and the equally obnoxious 'vinum
read' command.
1999-04-02 07:15:44 +00:00
Martin Cracauer
c5df07777c Use new -T switch to turn on immediate interruptibilty in shell
scripts. Also, the ugly 'echo -n' hack to prevent sh from a wrong
optimization isn't needed anymore.
1999-04-01 13:30:29 +00:00
Warner Losh
a780977066 Add two features:
log_in_vain:
	log_in_vain turns on logging for packets to ports for which
	there is no listener.
    rc.sysctl:
	A generic way to set sysctl values.  It reads /etc/syslog.conf
	and sets values based on that.  No /etc/syslog.conf has been
	checked in yet, and I've not added this to the makefile yet
	until I get more feedback.

Reviewed by: -current, -hackers and bde especially
1999-03-28 20:36:03 +00:00
Bill Fumerola
61bf4caf49 Split check_quotas into check_quotas and enable_quotas
enable_quotas - use quotas on your system
check_quotas - check for violations on startup

By assuming that a system was neat and without violation before it booted
we can skip a long (and at that point needless) process.

Submitted by:	Alex Perel <veers@disturbed.net>
1999-03-17 04:00:04 +00:00
Dag-Erling Smørgrav
cae59b3d6a Fix bogons in previous commit. 1999-03-14 20:26:39 +00:00
Dag-Erling Smørgrav
3e03255dd1 Chown the pty device nodes back to root:tty. 1999-03-14 03:20:22 +00:00
James FitzGibbon
1dd418124c Add ${lpd_program} and ${portmap_program} as variables in rc.conf, with
suitable defaults pointing to the FreeBSD-shipped versions.  This will allow
for easier integration of third-party replacements for these daemons.
Reviewed by: Several members of -committers
1999-03-11 16:17:24 +00:00
Jordan K. Hubbard
ef6caa5169 Correct various mentions of rc.conf 1999-02-13 05:30:49 +00:00
Jordan K. Hubbard
9c63624e6f Use /etc/defaults/rc.conf everywhere, falling back to /etc/rc.conf
as necessary (for half-assed upgrades).
1999-02-10 18:08:16 +00:00
Matthew Dillon
e4715b9359 Revamp rc.diskless. Split into rc.diskless1 and rc.diskless2. provide
more opportunities for overriding.  Clean up /etc/rc ( remove conf_dir,
    remove startup mount special cases, remove other special cases )
1999-02-09 17:17:18 +00:00
Matthew Dillon
89b71b3d69 Get rid of $conf_dir 1999-02-09 05:20:46 +00:00
Greg Lehey
ea7994c074 Change variable name vinum_slices to vinum_drives to match the variable
we set in rc.conf.

Background: the `vinum read' command has changed.  For a short period
of time, it required the names of the slices on which vinum was
stored.  Now it requires the names of the drives.
1999-01-31 04:28:51 +00:00
Matthew Dillon
94dc5b0701 If vfs.nfs.diskless_valid does not exist, the conditional fails
and spews an error message we'd rather not spew.  Fixed.

Submitted by:	Kevin Street <street@iname.com>
1999-01-29 06:18:12 +00:00
Peter Wemm
8942af695d Move reading of rc.conf sooner as requested by Greg. I'm a tad nervous
about this becase that makes it get run *before* the filesystems are
mounted.  If people have added stuff to their rc.conf or rc.conf.local
that uses stuff outside of /bin and /sbin, this will break.
1999-01-26 05:14:36 +00:00
Peter Wemm
d41bc16f34 The vinum setup tool automatically loads the vinum module if it's needed,
there is no need to duplicate the logic here.

XXX rc.conf needs to be read sooner..
1999-01-26 04:59:43 +00:00
Matthew Dillon
633dcb59ac Finish up /etc/rc adjustments to handle diskless read-only-root booting.
This will be followed up by rc.diskless and documentation.
1999-01-25 18:07:25 +00:00
Matthew Dillon
3c83a6adc9 Introduce rc script for BOOTP 'diskless' boot. Well, not quite diskless
since the kernel must be booted from something ( like a floppy ).  This
    script must occur near the beginning of the rc file in order to support
    read-only NFS mounts, which in turn allows all the BOOTP machines to use
    the same / and /usr.

    The companion rc.diskless script is forthcoming.
1999-01-25 04:40:53 +00:00
Jordan K. Hubbard
d441915b4b nuke dset from here.
Reminded by:	peter
1999-01-20 12:30:13 +00:00
Greg Lehey
7e7f24a712 Only start vinum if vinum_slices variable is non-empty
Reported-by:	roberto
1999-01-18 03:25:10 +00:00
Greg Lehey
f10d3a9382 Add hooks for starting vinum at boot time. Set the variable
vinum_slices to the names of all slices (block device) which are under
the control of vinum.  The configuration will be read in from each in
turn, starting with the most recently updated.

Reviewed-by:   jkh
1999-01-17 03:32:07 +00:00
Satoshi Asami
16ceea1b93 Move nologin from /etc to /var/run. This means one less file that has
to be written to /etc.

The only essential change is in paths.h, so any third-party software
written correctly will pick it up in the next rebuild.

Reviewed by:	the committers list (actually an old version)
1999-01-11 09:07:42 +00:00
Nick Hibma
69a90ca3df Added starting of usbd 1999-01-10 22:06:22 +00:00
Peter Wemm
0dbed541fe We load kld's in preference to LKM's, these do not need the root fs to be
read/write to load.
1999-01-06 14:01:52 +00:00
Matthew Dillon
d27356d803 Reviewed by: cvs-current
Commit changes to rc and rc.local, removing the remaining minimal
    functionality of rc.local into rc and commenting it out of rc.local
    prior to the deletion of rc.local from the CVS tree.
1998-12-12 23:04:21 +00:00
John Birrell
62bf5779e7 Should be sysctl -n. Yesterday wasn't one of my better days. Doh.
Reported by: Ben Smithurst & Makoto Matsushita
1998-12-11 08:25:12 +00:00
John Birrell
ad06d8fc41 Add a test for hw.machine == i386 before trying to run ldconfig for
legacy aout support.
1998-12-10 08:06:59 +00:00
Dag-Erling Smørgrav
353803b997 Hand me the pointy hat, and make it big. 1998-10-09 17:11:14 +00:00
Dag-Erling Smørgrav
b354705227 Remove all references to tickadj(8) from rc, rc.conf and rc.conf.5.
Disable building tickadj(8) by removing util from SUBDIR in the xntpd
Makefile. Note that the sources are still there and tickadj can still
be built and installed by doing:

# cd /usr/src/usr.sbin/xntpd/util
# make all install

There are enough references to tickadj in e.g. the xntpd documentation
(not to mention the sysctl variables it uses etc.) that I don't feel
up to implementing the final solution right now.

Kinda-approved-by:	phk
1998-10-08 18:47:30 +00:00
Martin Cracauer
043076cc06 Put guard shells around stuff started from $local_startup. If you type
SIGINT (C-c), you'll get control passed to the next script even if
the current one blocks signals. The child is not killed, though.
1998-09-30 14:44:57 +00:00
Brian Somers
5fd86945a2 Spaces -> tabs, don't use touch before it's available
Pointed out by: bde
1998-09-16 22:42:56 +00:00
John Polstra
34908526f4 Fix up the boot-time ldconfig handling to deal with dual object
file formats.  I have added a new rc.conf variable ${ldconfig_paths_aout}
which is like ${ldconfig_paths}, but only for a.out shared libraries.

On a "standard" ELF system, the ELF ldconfig path is taken from
${ldconfig_paths}, while the a.out ldconfig path is taken from
${ldconfig_paths_aout}.

On a not-yet-converted a.out system, only the a.out ldconfig path
is set, and it is taken from ${ldconfig_paths_aout}.  If that
variable is unset, /etc/rc defaults it to the value of ${ldconfig_paths},
on the assumption that the system's "/etc/rc.conf" file hasn't been
updated.
1998-09-16 05:42:38 +00:00
Søren Schmidt
c77c6e0cbb Make /dev/vga a softlink to /dev/ttyv0 under DEVFS using /etc/rc.devfs
Remove the hack from syscons that added a /dev/vga node in DEVFS
it broke root acces on ttyv0 because dev_mkdb screwed up.
1998-09-14 09:14:46 +00:00
James Raynard
f2e8db8e76 Disable kernel_secure_level unless explicitly set in rc.conf. Previously,
it was enabled unless explicitly unset, creating a pitfall for people
like me who upgraded /etc/rc without upgrading /etc/rc.conf.
1998-09-09 22:27:21 +00:00
Martin Cracauer
e0b8e0b8f2 Remove X11 lock files at boot time even if $clear_tmp_enable is not set.
PR:		conf/7366
Submitted by:	Thomas David Rivers rivers@dignus.com
1998-09-07 17:18:36 +00:00
John Polstra
f708e2297c Explicitly pass the "-aout" option to ldconfig, until I've had a
chance to work out a better scheme to handle the separate
invocations necessary for a.out and ELF.
1998-09-05 04:27:35 +00:00
Gary Palmer
47f0029b50 Don't try to run ldconfig if it doesn't exist. Useful for elf platforms. 1998-08-24 07:11:48 +00:00
Poul-Henning Kamp
09b51e49c7 Fix my blunder in my previous commit here. 1998-08-20 11:22:52 +00:00
Poul-Henning Kamp
ab138b58a5 Add "Mounting NFS file systems" progress indicator
PR:		7605
Reviewed by:	phk
Submitted by	Nick Hibma <nick.hibma@jrc.it>:
1998-08-14 06:49:05 +00:00
Brian Somers
1f3b20e3d2 Don't blat /var/run and /var/spool/lock *after* network_pass1()
unless /var is nfs-mounted.
This was removing ppps device lock (when ppp's started in
/etc/start_if.tun0 in -ddial or -dedicated mode) and allowing
other programs (such as mgetty) to confuse ppp by playing with
the modem while ppp's using it.

People that nfs-mount /var had better not start ppp in this
way....
1998-08-10 19:53:50 +00:00
Jacques Vidrine
722ab3dd95 make a bounds file for msgs(1) if there isn't one already
PR:		bin/3023
Reviewed by:	jkh@FreeBSD.ORG
1998-07-28 01:15:12 +00:00
Joseph Koshy
f3df0653bf Add rc.conf option to set kernel security level and modify "/etc/rc" to
use this.

Requested by: max, andreas

Note: This change just provides a convenient way to exercise existing
functionality.  Whether `kern.securelevel' is effective in increasing
system security is another issue, and one that has been well thrashed
out in the lists.
1998-06-22 06:34:12 +00:00