r285722 (brd):
Add support for building VirtualBox Vagrant images.
Abstract the build, package and upload to handle building
either type.
r285733
Fix an out-of-order execution issue regarding pkg(8):
- pkg(8) cannot be removed before subsequent reinvocations
- The PKG_CACHEDIR cannot be cleaned after the repo*.sqlite
has been removed
- pkg(8) cannot be removed as a precursor to any of the other
steps involved here
Approved by: re (kib)
Sponsored by: The FreeBSD Foundation
r276383:
Delay dropping to the mountroot prompt for 10 seconds
in case the root device is not yet ready.
r276400:
Use the correct loader.conf(5) entry for deferring the
mountroot prompt.
Approved by: re (marius)
Reminded by: hrs
Sponsored by: The FreeBSD Foundation
Use the pw(8) '-R' flag to change the relative root directory
when creating operating within the DESTDIR.
Approved by: re (marius)
Sponsored by: The FreeBSD Foundation
r284893 (brd):
Add initial support for building Vagrant images for VMWare.
Next steps will be adding Virtualbox support and uploading
to Hashicorp Atlas for others to consume.
r284895:
Add default VAGRANT_IMG variable.
r284896:
Remove _ACCOUNT and add _USERNAME, _NAME, _VERSION for the
VAGRANT_${VAR} variables extracted from VAGRANT_UPLOAD_CONF.
Set ATLAS_${VAR} to VAGRANT_${VAR} if VAGRANT_UPLOAD_CONF
is set. There is intent to intentionally have separate
variants of configuration entries, but the defaults do not
yet have any reason to be different.
r284897:
Instead of hard-coding the PROVIDERS for upload, add the
VAGRANT_PROVIDERS variable. Right now, it defaults to only
vmware_desktop, virtualbox support is to follow at some point.
While here, fix the hashicorp URL: s/vagrant/atlas/, which
was result of a sed(1) replace (and my fault).
r284942 (brd):
Add Support for uploading Vagrant images to Hashicorp Atlas.
r284968:
Default the VAGRANT_VERSION to ${REVISION}-${BRANCH} if
not set, which expands to '11.0-CURRENT', for example.
If the branch is -CURRENT, -STABLE, or -PRERELEASE, suffix
the VAGRANT_VERSION with the snapshot date.
r284996:
Fix the gcloud port/package name.
r285005:
Remove the HH-MM suffix from the build date suffix.
It was useful when working out several kinks when testing
automated image uploading when retrying was necessary, but
now it is making things much too messy.
Sponsored by: The FreeBSD Foundation
r284882:
Add initial support for automatically uploading GCE virtual
machine images to the Google Compute Engine platform.
Remove gce-package.sh.
r284884:
Fix a vi-invoked typo.
Sponsored by: The FreeBSD Foundation
r284780:
Ensure ASSUME_ALWAYS_YES is set when deleting pkg(8) from the
DESTDIR, otherwise it can get stuck in ttyin.
r284811:
Consider PRERELEASE builds snapshots, in addition to CURRENT
and STABLE.
r284812:
Change the hour:minute delimiter from ':' to '-', since
the former is an invalid character in EC2 images.
Approved by: re (glebius, insta-MFC)
Sponsored by: The FreeBSD Foundation
r284660:
Remove the Azure-local vm_extra_create_disk(), since we no longer
need qemu-img to convert the final VHD image to an Azure-compatible
format.
Although the waagent utility is installed from ports, create the
symlink to /usr/sbin, pending investigation on where this is
hard-coded, so it can be reported upstream.
r284676:
Append the hour and minute to the snapshot suffix for EC2
AMIs and Azure VM images. This is particularly helpful for
testing to avoid name collisions, but also useful for cases
where a necessary rebuild is done before the date changes.
Sponsored by: The FreeBSD Foundation
Reduce the arm/armv6 image size from 1G to 480M.
Since the images are effectively mostly zeros at 1G,
reduce the size to allow installation on smaller SD
cards, such as 512Mb.
While here, stop writing the /boot.txt file on the
WANDBOARD, which isn't used anyway.
Sponsored by: The FreeBSD Foundation
r283920:
Add a configuration file to support the Cubox/Hummingboard SoC.
r283991:
Add initial support for building images for the Duovero Gumstix
board.
r283992:
Fix a whitespace nit.
r284102:
Set the correct UBLDR_LOADADDR for the Wandboard and
Cubox/Hummingboard images.
Sponsored by: The FreeBSD Foundation
In arm_create_disk(), disable soft updates journaling.
Disabling soft updates journaling appears to resolve issues
with kernel panics, and may also be generally bad to have
enabled for SD cards.
Sponsored by: The FreeBSD Foundation
r283894 [1]:
Disable arm_create_user().
r283895 [1]:
Re-enable arm_create_user(), and pass the '-V DESTDIR/etc' to
pw(8) to set the correct /etc directory for the user/group
files.
r283913:
Pass the '-b' argument to pw(8) so the '/home' directory is
created in the correct place.
r284004:
Make sure /home exists within the DESTDIR before creating the
'freebsd' user account.
r284010 [2]:
Work around a potential bug in pw(8) when '-m' is specified.
[1] For recording merge history only.
[2] This commit post-dates the pw(8) '-R' addition in head/,
which is needed for conflict resolution from r284004.
Sponsored by: The FreeBSD Foundation
r283673:
Sort configuration options for consistency with other boards.
r283674:
Export 'BOARDNAME' when differs from the KERNCONF.
Sponsored by: The FreeBSD Foundation
r283573:
Remove a continuation on error, since the relevant behavior can
only occur if a particular file exists.
r283574:
Set STAGE_TARGETS only if RELEASEDIR exists.
r283575:
Remove duplicate exists() sanity check.
r283576:
Reindent after previous commit.
r283580:
Use SVNREVISION and BUILDDATE if passed into the make(1)
environment, fallback to trying to figure it out otherwise.
r283593:
Fix a typo in a comment.
r283618:
Invert the build date and svn revision to match the namimg
convention that has been in use for a while.
Sponsored by: The FreeBSD Foundation
Use mkimg(1) to create the i386 memstick images, similar to
how is done for amd64. The exception here is there is no
EFI partition for i386.
Sponsored by: The FreeBSD Foundation
r282794, r282795, r282796, r282797, r282798, r282799, r283265,
r283266, r283268, r283271, r283272, r283298, r283302:
Add a new file, Makefile.mirrors, which is intended to replace
a 474-line kludge of a shell script to pre-create the directory
hierarchy on ftp-master.
This is not in any way connected to the build, and there is no
intention to do so. This only intent here is to try to make
things a little bit easier.
Always use the 'make install' directory as the source for images.
For RE purposes, we use the default (/R within the chroot), so
this helps avoid copying files multiple times and xz(1)-compressing
additional times when not needed.
Fix staging virtual machine images for ftp propagation.
This Makefile is not for general consumption.
Sponsored by: The FreeBSD Foundation
Include the TARGET in the EC2 AMI name.
Without this, AWS rejects subsequent image uploads of a different
architecture because the name conflicts.
Sponsored by: The FreeBSD Foundation
r282500:
Add initial support for building RPI2 images.
In release.sh, allow overriding buildenv_setup() before
the handoff to arm/release.sh.
Copy arm/RPI-B.conf -> arm/RPI2.conf, set UBOOT_PORT and
the correct KERNEL, and add the buildenv_setup() override
to install the sysutils/u-boot-rpi2 port/package.
Copy tools/arm/crochet-RPI-B.conf -> tools/arm/crochet-RPI2.conf,
and set the correct entries for the RaspberryPi2 board.
r282693:
Merge ^/projects/release-arm-redux into ^/head.
Of note:
- This commit adds native FreeBSD/arm release build support without
requiring out-of-tree utilities.
- Part of this merge removes the WANDBOARD-{SOLO,DUAL,QUAD} kernel
configuration files, for which the IMX6 kernel configuration file
should be used instead.
- The resulting images have a 'freebsd' user (password 'freebsd'),
to allow ssh(1) access when console access is not available (VGA
or serial). The default 'root' user password is set to 'root'.
- The /etc/ttys file for arm images now enable both ttyv0 and ttyu0
by default.
Note: The RPI2 kernel configuration does not yet exist in stable/10,
however the merge conflicts needed to be properly resolved.
Additionally, SRCBRANCH has been set to base/stable/10 in the updated
arm configuration files as part of this commit.
Sponsored by: The FreeBSD Foundation
r282419:
Add logic to detect if the net/bsdec2-image-upload port needs
to be installed. [1]
For the cw-ec2-portinstall and ec2ami targets, touch the
.TARGET file after completion to prevent duplicate invocations.
Add cw-ec2-portinstall and ec2ami to CLEANFILES.
r282435:
Remove a debugging line that snuck in with the previous commit.
Sponsored by: The FreeBSD Foundation
r281783, r281809, r281832:
r280299 (cperciva):
When creating VM images, copy the contents of the created filesystem
into a new filesystem before packaging it into a disk image. This
prevents "remnants" of deleted files from showing up in the VM images,
and reduces their compressed size (by about 10% for the cloudware
images) as a result.
r280840 (cperciva):
Clean up filesystem unmounting in vmimage builds:
- Remove vm_umount_base function which is currently unused.
- Add umount_loop function which loops attempting to unmount one
filesystem.
- Replace calls to umount with calls to umount_loop.
- Don't attempt to unmount ${DESTDIR}/dev if it isn't mounted.
The looping is necessary because sometimes umount fails due to
filesystems being busy. The most common cause of such busyness is
periodic(8) jobs running `find / ...`.
r280846 (cperciva):
Improve check for whether ${DESTDIR}/dev is mounted.
r280879 (cperciva):
Add bits for building EC2 disk images.
r280881 (cperciva):
Partially revert r278118 now that the required logic for deciding
whether freebsd-update can be useful has moved into the
firstboot_freebsd_update script.
r280884 (cperciva):
Fix pkg(8) command line in vm_extra_pre_umount().
r280928 (cperciva):
Add code for creating an EC2 AMI.
r281783:
When building VM disk images, vm_copy_base() uses tar(1) to copy
the userland from one md(4)-mounted filesystem to a clean filesystem
to prevent remnants of files that were added and removed from
resulting in an unclean filesystem. When newfs(8) creates the first
filesystem with journaled soft-updates enabled, the /.sujournal file
in the new filesystem cannot be overwritten by the /.sujournal in the
original filesystem.
To avoid this particular error case, do not enable journaled
soft-updates when creating the md(4)-backed filesystems, and instead
use tunefs(8) to enable journaled soft-updates after the new
filesystem is populated in vm_copy_base().
While here, fix a long standing bug where the build environment /boot
files were used by mkimg(1) when creating the VM disk images by using
the files in .OBJDIR.
r281809:
Simplify variable expansion in attempt to fix the vm-image build.
r281832:
Fix locating the /boot files.
Sponsored by: The FreeBSD Foundation
images from FTP, due to a crash-on-boot problem.
Requested by: jhb (months ago), bapt (recently)
Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation
r279249:
Add 'cloudware-install' target to handle copying cloud
disk images to a directory within DESTDIR.
Add CLOUDINSTALL variable to automatically generate the
actual list of install targets. While here, rename the
cloud-specific names from 'vm-' to 'cw-' to avoid naming
collisions.
Add AZURE_DISK, GCE_DISK, and OPENSTACK_DISK output file
variables.
Add 'cloudware-install' to the 'install' target.
r279250:
Remove a stale comment.
r279257:
Add a CLOUDPACKAGE variable to contain a list of targets for
post-install packaging cloud provider images.
Add a 'gce-package.sh' script to generate the final output
image ready for upload to the GCE platform. Right now, this
is the only image that has a specific output format (GNU-tar),
and this implementation is expected to be temporary.
This is not directly connected to the other release targets.
Sponsored by: The FreeBSD Foundation
r278118, r278119, r278206, r278502:
r277458:
Move virtual machine / cloud provider targets and
options from release/Makefile to their own Makefile.
Add glue to allow enabling building cloud provider VM images
by default.
Add a 'vm-cloudware' target, used to drive all targets in
CLOUDTARGETS.
Add examples for WITH_CLOUDWARE to release.conf.sample.
Add WITH_CLOUDWARE evaluation to RELEASE_RMAKEFLAGS.
Rewrite to consolidate VM image build scripts into one.
Fix duplicated mkimg(1) call in vm_create_disk().
Add primitive (untested) PowerPC/PowerPC64 VM image support.
Note: As it is currently written, the /boot/pmbr and
/boot/{gptboot,boot1.hfs} use the build host and not the
target build. Fixing this is likely going to be a hack in
itself.
mount(8) and umount(8) devfs(5) as needed.
Change path for mk-vmimage.sh from ${TARGET}/ to scripts/ now that
it is consolidated into one file.
Fix paths for the base image and output disk image files.
Set the boot partition type to 'apple-boot' for powerpc.
In vm_install_base(), copy the host resolv.conf into the build
chroot before attempting to do anything that requires working DNS
(i.e., pkg bootstrap).
In vm_extra_pre_umount(), remove the resolv.conf before the disk
image is unmounted from the backing md(4).
Silence errors when umounting the chroot's /dev, since it probably
doesn't exist when we're running this.
Unmount filesystems before attempting to destroy the md which
holds them.
Unmount filesystem and destroy md before we read the vnode from
disk and package it into a disk image. Otherwise we end up
packaging an unclean filesystem.
Merge duplicative vm-CLOUDTYPE targets before additional duplication
gets added by the impending arrival of ec2 and gcloud.
Add NOSWAP option which can be set by a vmimage.conf file to specify
that no swap space should be created in the image. This will be used
by EC2 builds, since FreeBSD/EC2 allocates swap space on "ephemeral"
disks which are physically attached to the Xen host node.
In vm_extra_install_packages(), only bootstrap pkg(8) if
VM_EXTRA_PACKAGES is empty.
In vm_extra_pre_umount(), cleanup downloaded packages if pkg(8) was
bootstrapped earlier.
In vm_extra_install_base(), do not install waagent in the openstack
image, because it is not used. This appears to be a copy mistake.
Remove vm_extra_install_base() from the openstack.conf entirely,
since it does not need to be overridden.
Enable password-less sudo for openstack images.
Update the VM_EXTRA_PACKAGES list for the openstack images.
Remove vm_extra_install_base() for the Azure image, now that the
waagent exists in the ports tree.
Add sysutils/azure-agent to the VM_EXTRA_PACKAGES list.
In vm_extra_pre_umount(), remove the explicit pkg(8) install
list, as dependencies are resolved by sysutils/azure-agent.
Add a 'list-cloudware' target to print the list of supported CLOUDWARE
values and a description.
Add the AZURE_DESC and OPENSTACK_DESC descriptions.
Update release(7)
Add 'list-vmtargets' target, which produces a list of all supported
VM and cloud provider images.
Add VHD_DESC, VMDK_DESC, QCOW2_DESC, RAW_DESC image descriptions.
Update release(7) to document the list-vmtargets target.
Add initial support for the GCE (Google Compute Engine) cloud hosting
provider image.
Remove the console setting from rc.conf(5), which is not used there.
While here, set console to include vidconsole in the loader.conf(5).
Remove the pkg-clean(8) call from vm_extra_pre_umount() since the
function is often overridden.
Add vm_extra_pkg_rmcache() to call pkg-clean(8) to avoid duplicated
code.
Move resolv.conf(5) removal back to vm_extra_pre_umount() where it
belongs.
The GCE image needs resolv.conf(5) to exist (created as part of the
image setup), so it cannot be removed.
Comment the line that configures ttys(5) to 'off', which makes it
impossible to test that the image boots.
Add a note explaining why the line is commented, and not (yet) removed
entirely.
Move the 'install' bits that are specific to virtual machine images
from the Makefile to Makefile.vm.
Rename the 'install' target to 'release-install', and add a new
'vm-install' target.
Add a new 'install' target that invokes the new targets.
Add WITH_CLOUDWARE to the list of make(1) variables for the release
build.
Remove hw.vga.textmode=1 from the VM image loader.conf, which was
included during test builds and not intended to be included when
merging this project branch back to head.
Remove mk-azure.sh, which is no longer needed.
r277536:
Rename the 'release' target to 'real-release', and add two targets,
'vm-release' and 'cloudware-release', that are invoked if
WITH_VMIMAGES and WITH_CLOUDWARE are not empty.
This fixes an issue where 'make release' would not build the cloud
provider targets because CLOUDWARE was not yet set.
Move the WITH_VMIMAGES and WITH_CLOUDWARE targets to Makefile.vm.
Note: There is no 'cloudware-install' target yet, since some of the
disk image names may need to be specific to the provider, so this is
probably best handled by the build scripts.
r277606:
Provide a recipe of "true" for building the "release" target once
its prerequisites are satisfied, in order to avoid having an implicit
rule triggered by the presence of release.sh.
r277609:
When iterating through VMFORMATS, the VMBASE file is not removed
or truncated to a zero-size file, which if used to create more
than one disk image format, can result in accidental pollution of
the target formatted disk image.
Instead of using a single VMBASE image (vm.img, by default), use
a single base file for each format, named as VMFORMAT.img, which
produces VMBASE.VMFORMAT as the final formatted image.
r277836:
Rename the 'system' target to 'disc1', which is specific to the
disc1.iso installer image.
Replace 'system' with 'release' in CLEANFILES, and add 'disc1'
to CLEANDIRS.
Ensure the 'dvd' target depends on 'packagesystem'.
Fix 'mini-memstick.img' prerequisite, which should be the 'bootonly'
target, not 'disc1' (previously 'system').
Use .TARGET as the target installation directory for the disc1.iso
and bootonly.iso images, which now expand to 'disc1' and 'bootonly'
respectively, mimicking the behavior of the 'dvd' target.
Remove '@true' from the 'release' target, and instead use
'touch ${.TARGET}' to prevent multiple iterations of
'make release' from clobbering previously-built installer
medium.
r277839:
Update release(7) to reflect renaming the 'system' target to 'disc1'.
r278118:
Move service_enable="YES" rc.conf(5) additions to VM_RC_LIST and
deduplicate.
Evaluate if firstboot_freebsd_update should be enabled based on
UNAME_r, because it is not supported for the -CURRENT or -STABLE
branches.
r278119:
Use ifconfig_DEFAULT="" instead of hard-coding vtnet(4)
r278206:
Bump copyright after r277458.
r278502:
In scripts/mk-vmimage.sh, prevent incorrect usage() by defaulting
VMCONFIG to /dev/null, and additionally ensuring VMCONFIG is not
a character device before it is sourced.
While here, be sure to exit if usage() is called.
This should effectively be no-op, but the usage() output was
discovered while investigating a larger issue.
* Several changes local to stable/10 were needed in order to handle
UEFI images that are specific to this branch.
Tested with: stable/10@r278906
Sponsored by: The FreeBSD Foundation
Security Advisory information is included on several
pages in the release notes. Rather than duplicating
the information between various files, add two new
files to include in all pages that currently display
the information.
Sponsored by: The FreeBSD Foundation
r278115:
Move the 'Upgrading from Previous Releases of FreeBSD'
section to the top of the file, following the introduction.
r278116:
Overhaul the relnotes page to reorganize the sections.
With the previous layout, the majority of the release
notes were categorized under one main "What's New"
section, which in addition to making the page difficult
to parse relevant bits, also had a few rendering issues,
such as 'Note' blocks visually not appearing as if they
pertain to a particular change.
This change removes the "What's New" section, integrating
it with the introduction. In addition, each section now
provides a brief description of its contents, broken down
further into a subsection for each "topic", making it much
easier to find a specific topic in the page.
[1] This is a direct commit, not an MFC.
Sponsored by: The FreeBSD Foundation
r277837:
Provide a description for the 'tests.txz' distribution
in the MANIFEST file.
Turn off the test suite installation by default.
r277838:
Fix a typo in a comment.
Sponsored by: The FreeBSD Foundation
r276765:
Update pkg-stage.sh to be compatible with pkg-1.4.x.
In 1.3.x and earlier, ABI format is, for example,
freebsd:11:x86:64.
In 1.4.x, ABI format is FreeBSD:11:amd64, and a new
configuration entry, ALTABI, is: freebsd:11:x86:64.
Export PKG_ABI and PKG_ALTABI accordingly, and if
PKG_ALTABI is set, create a symlink within the dvd
PKG_CACHEDIR so both new and old ABI directories
exist.
r276766:
Properly change directories before creating the
PKG_ALTABI -> PKG_ABI symlink.
r276820:
Print informational output when NOPORTS is set,
which would otherwise cause pkg-stage.sh to
silently exit.
r276822:
Ensure /var/run/ld-elf.so.hints exists before building
pkg(8).
r276827:
Ensure the ports directories exist for the list of
packages intended to be included on the DVD, and
remove any nonexistent ports from the final list.
Print the list of missing paths, and ensure that
DVD_PACKAGES is non-zero length (which should never
happen).
r276828:
Switch to x11/gnome3 now that x11/gnome2 no longer
exists in the ports tree.
Sponsored by: The FreeBSD Foundation
r264400:
NO_MAN= has been deprecated in favor of MAN= for some time, go ahead
and finish the job. ncurses is now the only Makefile in the tree that
uses it since it wasn't a simple mechanical change, and will be
addressed in a future commit.
r265836:
Remove last two NO_MAN= in the tree. In both of these cases, MAN= is
what is needed.
Fix a few issues with creating VOLUME_LABEL for the
installation ISOs:
- TYPE, BRANCH, and REVISION are only defined if
OSRELEASE is not defined, so in situations where
one might set OSRELEASE for an in-house ISO build,
VOLUME_LABEL would be empty.
- makefs(8) limits the volume label to 32 characters,
which for the powerpc64 case, OSRELEASE expands to
FreeBSD-11.0-CURRENT-powerpc-powerpc64. Even with
removing the prefixing 'FreeBSD-', the string is 30
characters long, leaving zero room for suffixing the
type of ISO media (BO for bootonly, CD for cdrom, and
DVD for dvdrom).
Resolve these by defining VOLUME_LABEL when defining
OSRELEASE if unset. If OSRELEASE is defined by the
builder, use the OSRELEASE from that definition as the
VOLUME_LABEL.
In addition, for cases where both TARGET and TARGET_ARCH
are used for the VOLUME_LABEL, use TARGET_ARCH if it
differs from TARGET.
There are probably a few sharp edges here yet, but these
problems are going to affect the powerpc/powerpc64 builds
for 10.1-RELEASE, so the immediate concern is fixing the
underlying problem at hand quickly, and less so about the
elegance of the fix.
Insta-MFC ok: re (kib)
Sponsored by: The FreeBSD Foundation
r273093:
Merge the following from ^/projects/release-vmimage:
r272436, r272437, r272792:
r272436:
Remove the first argument to panic(), which was initially
intended to be the exit code, however when a non-zero exit
code was returned to release/Makefile, this would prevent
any remaining (and possibly successful) stages from being
attempted.
r272437:
If the vm-base target fails, prevent the vm-image target
from being run since it cannot possibly succeed.
r272792:
Add /usr/local/bin and /usr/local/sbin to PATH, needed
if third-party software needs to use utilities outside
of the base system during post-install stages (indexinfo
is one culprit).
r273096:
Merge the following from ^/projects/release-vmimage:
r273076, r273077, r273079, r273095:
r273076:
Add a separate make(1) target to release/Makefile to
build FreeBSD virtual machine disk images for use on
the Microsoft Azure service.
For now, this target is not directly connected to the
build, however can be manually invoked.
The 'vm-azure' target invokes {amd64,i386}/mk-azure.sh,
which does the heavy lifting to produce proper VHDs.
mk-azure.sh uses a configuration file, defaulting to
tools/azure.conf if otherwise unset.
r273077:
Clear VM_RC_LIST.
r273079:
Fix signal list to trigger umount(8).
r273095:
Output an informational message when mkimg(1) runs, so it
does not appear that the process has stopped while waiting
for a 'y/n' response when waagent is deprovisioned.
Relnotes: yes
Sponsored by: The FreeBSD Foundation
In the stable/ branches, release.prev intentionally points to the
previous version, in addition to a number of intentional version
mappings for the errata.html page, that this commit breaks.
Reported by: hrs
Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation
Merge the following revisions from ^/projects/release-vmimage:
r272234, r272236, r272262, r272264, r272269, r272271, r272272,
r272277, r272279, r272376, r272380, r272381, r272392, r272234,
r272412:
r272234:
Initial commit to include virtual machine images as part
of the FreeBSD release builds.
This adds a make(1) environment variable requirement,
WITH_VMIMAGES, which triggers the virtual machine image
targets when not defined to an empty value.
Relevant user-driven variables include:
o VMFORMATS: The virtual machine image formats to create.
Valid formats are provided by running 'mkimg --formats'
o VMSIZE: The size of the resulting virtual machine
image. Typical compression is roughly 140Mb, regardless
of the target size (10GB, 15GB, 20GB, 40GB sizes have been
tested with the same result).
o VMBASE: The prefix of the virtual machine disk images.
The VMBASE make(1) environment variable is suffixed with
each format in VMFORMATS for each individual disk image, as
well as '.img' for the source UFS filesystem passed to
mkimg(1).
This also includes a new script, mk-vmimage.sh, based on how
the VM images for 10.0-RELEASE, 9.3-RELEASE, and 10.1-RELEASE
were created (mk-vmimage.sh in ^/user/gjb/thermite/).
With the order in which the stages need to occur, as well as
sanity-checking error cases, it makes much more sense to
execute a shell script called from make(1), using env(1) to
set specific parameters for the target image than it does to
do this in make(1) directly.
r272236:
Use VMBASE in place of a hard-coded filename in the CLEANFILES
list.
r272262:
Remove a 'set -x' that snuck in during testing.
r272264:
release/Makefile:
Connect the virtual machine image build to the release
target if WITH_VMIMAGES is set to a non-empty value.
release/release.sh:
Add WITH_VMIMAGES to RELEASE_RMAKEFLAGS.
release/release.conf.sample:
Add commented entries for tuning the release build if the
WITH_VMIMAGES make(1) environment variable is set to
a non-empty value.
r272269:
release/Makefile:
Include .OBJDIR in DESTDIR in the vm-base target.
release/release.sh:
Provide the full path to mddev.
r272271:
Fix UFS label for the root filesystem.
r272272:
Remove comments left in accidentally while testing, so the
VM /etc/fstab is actually created.
r272277:
Remove the UFS label from the root filesystem since it is added
by mkimg(1) as a gpt label, consistent with the fstab(5) entry.
r272279:
Comment cleanup in panic() message when mkimg(1) does not support
the requested disk image format.
r272376:
Separate release/scripts/mk-vmimage.sh to machine-specific
scripts, making it possible to mimic the functionality for
non-x86 targets.
Move echo output if MAKEFLAGS is empty outside of usage().
Remove TARGET/TARGET_ARCH evaluation.
r272380:
Avoid using env(1) to set values passed to mk-vmimage.sh,
and instead pass the values as arguments to the script,
making it easier to run this by hand, without 'make release'.
Add usage_vm_base() and usage_vm_image() usage helpers.
r272381:
After evaluating WITH_VMIMAGES is non-empty, ensure
the mk-vmimage.sh script exists before running it.
r272392:
Add WITH_COMPRESSED_VMIMAGES variable, which when set enables
xz(1) compression of the virtual machine images.
This is intentionally separate to allow more fine-grained
tuning over which images are compressed, especially in cases
where compressing 20GB sparse images can take hours.
r272412:
Document the new 'vm-image' target, and associated release.conf
variables.
r272413:
Remove two stray comments added during the initial iterations
of testing, no longer needed.
Sponsored by: The FreeBSD Foundation
Features not yet available in stable/10 are needed in
mkimg(1), and it is more dangerous to tweak these changes
in stable/10 directly without explicitly testing certain
failure cases.
Re-addition of this change is imminent.
Sponsored by: The FreeBSD Foundation
Merge the following revisions from ^/projects/release-vmimage:
r272234, r272236, r272262, r272264, r272269, r272271, r272272,
r272277, r272279, r272376, r272380, r272381, r272392, r272234,
r272412:
r272234:
Initial commit to include virtual machine images as part
of the FreeBSD release builds.
This adds a make(1) environment variable requirement,
WITH_VMIMAGES, which triggers the virtual machine image
targets when not defined to an empty value.
Relevant user-driven variables include:
o VMFORMATS: The virtual machine image formats to create.
Valid formats are provided by running 'mkimg --formats'
o VMSIZE: The size of the resulting virtual machine
image. Typical compression is roughly 140Mb, regardless
of the target size (10GB, 15GB, 20GB, 40GB sizes have been
tested with the same result).
o VMBASE: The prefix of the virtual machine disk images.
The VMBASE make(1) environment variable is suffixed with
each format in VMFORMATS for each individual disk image, as
well as '.img' for the source UFS filesystem passed to
mkimg(1).
This also includes a new script, mk-vmimage.sh, based on how
the VM images for 10.0-RELEASE, 9.3-RELEASE, and 10.1-RELEASE
were created (mk-vmimage.sh in ^/user/gjb/thermite/).
With the order in which the stages need to occur, as well as
sanity-checking error cases, it makes much more sense to
execute a shell script called from make(1), using env(1) to
set specific parameters for the target image than it does to
do this in make(1) directly.
r272236:
Use VMBASE in place of a hard-coded filename in the CLEANFILES
list.
r272262:
Remove a 'set -x' that snuck in during testing.
r272264:
release/Makefile:
Connect the virtual machine image build to the release
target if WITH_VMIMAGES is set to a non-empty value.
release/release.sh:
Add WITH_VMIMAGES to RELEASE_RMAKEFLAGS.
release/release.conf.sample:
Add commented entries for tuning the release build if the
WITH_VMIMAGES make(1) environment variable is set to
a non-empty value.
r272269:
release/Makefile:
Include .OBJDIR in DESTDIR in the vm-base target.
release/release.sh:
Provide the full path to mddev.
r272271:
Fix UFS label for the root filesystem.
r272272:
Remove comments left in accidentally while testing, so the
VM /etc/fstab is actually created.
r272277:
Remove the UFS label from the root filesystem since it is added
by mkimg(1) as a gpt label, consistent with the fstab(5) entry.
r272279:
Comment cleanup in panic() message when mkimg(1) does not support
the requested disk image format.
r272376:
Separate release/scripts/mk-vmimage.sh to machine-specific
scripts, making it possible to mimic the functionality for
non-x86 targets.
Move echo output if MAKEFLAGS is empty outside of usage().
Remove TARGET/TARGET_ARCH evaluation.
r272380:
Avoid using env(1) to set values passed to mk-vmimage.sh,
and instead pass the values as arguments to the script,
making it easier to run this by hand, without 'make release'.
Add usage_vm_base() and usage_vm_image() usage helpers.
r272381:
After evaluating WITH_VMIMAGES is non-empty, ensure
the mk-vmimage.sh script exists before running it.
r272392:
Add WITH_COMPRESSED_VMIMAGES variable, which when set enables
xz(1) compression of the virtual machine images.
This is intentionally separate to allow more fine-grained
tuning over which images are compressed, especially in cases
where compressing 20GB sparse images can take hours.
r272412:
Document the new 'vm-image' target, and associated release.conf
variables.
r272413:
Remove two stray comments added during the initial iterations
of testing, no longer needed.
Sponsored by: The FreeBSD Foundation
Create /tmp/bsdinstall_etc even if we aren't starting the installer
so that dhclient can write resolv.conf when used from the live
environment.
PR: 176078
Approved by: re
When populating the dvd/packages/ directory, create
a symlink to All/pkg-*.txz in the Latest/ directory.
This allows 'pkg bootstrap' to work out-of-box if
the REPOS_DIR environment is properly set.
Approved by: re (delphij)
Sponsored by: The FreeBSD Foundation
r271676:
Catch up with Crochet changes to fix the BEAGLEBONE
build.
r271677:
Catch up with Crochet changes to fix the WANDBOARD-QUAD
build.
r271678:
Set a static revision of the Crochet checkout to avoid
surprise build failures.
Approved by: re (marius)
Sponsored by: The FreeBSD Foundation
r271480:
Set PKG_CACHEDIR to an 'All/' directory one level lower
to fix 'pkg repo' generating repository metadata for the
on-disc packages.
r271483:
Fix duplicate PKG_ABI in the PKG_CACHEDIR path.
r271491:
Simplify dvd package population with pkg-1.3.
Approved by: re (rodrigc)
Sponsored by: The FreeBSD Foundation
