It's 2015, and some people are still trying to use fdisk and then
go asking what debug flags to set for GEOM to make it work. Advice
them to use gpart(8) instead.
Something similar should probably done with disklabel,
but I need to rewrite the disklabel examples first.
Sponsored by: The FreeBSD Foundation
262885, 262891, 262903,
imx6: Add a tunable to set the number of active cores, enable SMP by default.
ffec: Fix multicast filtering.
Allwinner a10/a20...
- Add gpio and clock bits for A10/A20's EMAC ethernet controller driver
- EMAC gpio configuration
- EMAC clock activation
- Add Static Random Access Memory controller driver for A10/A20.
A10/A20's SRAM is used by devices, such as CPU, EMAC,
for extra fast memory or as cache.
- Add EMAC 10/100 Ethernet controller driver for A10/A20.
It is available mostly in A10 devices like Hackberry, Marsboard,
Mele A1000, A2000, A100 HTPC, cubieboard1 and A20 device
like cubieboard2.
TX performance can be improved using both channels 0 and 1.
RX performance is poor and needs improvement with the assistance of
external DMA controller in case there
- Add EMAC and SRAM controller entries to FDT.
- Add EMAC device to kernel config files and enable EMAC, SRAM drivers.
OMAP: When calculating the MPU freq, make sure not to overflow.
Vybrid:
- Add driver for Port control and interrupts (PORT).
- Export panel info to DTS
- Reset all the layers before setup first one
- Enable display
nandfs: Slight code reordering to make error branch last.
Add option TMPFS to arm/conf/DEFAULTS, remove it from the few configs
that have it individually. Concensus on freebsd-arm@ is that it should
be included in all ARM kernels.
Fix the arm sys_sigreturn(): its argument is a struct ucontext, not a
struct sigframe containing the struct ucontext.
The NAND Flash environment consists of several distinct components:
- NAND framework (drivers harness for NAND controllers and NAND chips)
- NAND simulator (NANDsim)
- NAND file system (NAND FS)
- Companion tools and utilities
- Documentation (manual pages)
This work is still experimental. Please use with caution.
Obtained from: Semihalf
Supported by: FreeBSD Foundation, Juniper Networks
