..
alpm.c
amd.c
amd.h
Back out the previous change to the queue(3) interface.
2000-05-26 02:09:24 +00:00
cy_pci.c
cy_pcireg.h
dc21040reg.h
ide_pcireg.h
if_ar_p.c
if_dc.c
When I tweaked if_dc.c to alter the polling interval for non-MII
2000-06-07 17:07:44 +00:00
if_dcreg.h
Rework the support for the internal autonegotiation on the 21143 and
2000-05-31 05:40:53 +00:00
if_de.c
Use the correct name for the PCI command register (PCIR_COMMAND). Don't
2000-05-28 16:06:56 +00:00
if_devar.h
Use bus_space for all register accesses.
2000-05-13 18:47:24 +00:00
if_en_pci.c
if_fxp.c
Move code to handle BPF and bridging for incoming Ethernet packets out
2000-05-14 02:18:43 +00:00
if_fxpreg.h
if_fxpvar.h
if_mn.c
if_rl.c
Use the correct register name. s/PCI_COMMAND_STATUS_REG/PCIR_COMMAND/
2000-05-28 16:13:43 +00:00
if_rlreg.h
if_sf.c
Use the correct register name. s/PCI_COMMAND_STATUS_REG/PCIR_COMMAND/
2000-05-28 16:13:43 +00:00
if_sfreg.h
if_sis.c
Use the correct register name. s/PCI_COMMAND_STATUS_REG/PCIR_COMMAND/
2000-05-28 16:13:43 +00:00
if_sisreg.h
if_sk.c
- Call mii_pollstat() after we bring up the link on a 1000baseTX card
2000-06-06 02:56:37 +00:00
if_skreg.h
Back out the previous change to the queue(3) interface.
2000-05-26 02:09:24 +00:00
if_sr_p.c
if_ste.c
Use the correct register name. s/PCI_COMMAND_STATUS_REG/PCIR_COMMAND/
2000-05-28 16:13:43 +00:00
if_stereg.h
if_ti.c
Use the correct register name. s/PCI_COMMAND_STATUS_REG/PCIR_COMMAND/
2000-05-28 16:13:43 +00:00
if_tireg.h
Back out the previous change to the queue(3) interface.
2000-05-26 02:09:24 +00:00
if_tl.c
Use the correct register name. s/PCI_COMMAND_STATUS_REG/PCIR_COMMAND/
2000-05-28 16:13:43 +00:00
if_tlreg.h
if_tx.c
Avoid double-call to bpf_mtap(). This is now handled in ether_input().
2000-05-24 00:05:44 +00:00
if_txvar.h
if_vr.c
Use the correct register name. s/PCI_COMMAND_STATUS_REG/PCIR_COMMAND/
2000-05-28 16:13:43 +00:00
if_vrreg.h
if_wb.c
Use the correct register name. s/PCI_COMMAND_STATUS_REG/PCIR_COMMAND/
2000-05-28 16:13:43 +00:00
if_wbreg.h
if_wx.c
Move code to handle BPF and bridging for incoming Ethernet packets out
2000-05-14 02:18:43 +00:00
if_wxreg.h
if_wxvar.h
if_xl.c
Use the correct register name. s/PCI_COMMAND_STATUS_REG/PCIR_COMMAND/
2000-05-28 16:13:43 +00:00
if_xlreg.h
intpm.c
Fix some leakage from inside #ifdef PCI_COMPAT (the FreeBSD 2.2 compat
2000-05-28 16:17:18 +00:00
intpmreg.h
isp_pci.c
locate.pl
meteor_reg.h
meteor.c
ncr.c
ncr.c is no longer a COMPAT_OLDPCI device - remove the warning.
2000-05-28 10:45:06 +00:00
ncrreg.h
ohci_pci.c
Only display the 'Disable PNP-OS BIOS option' message on the i386 arch.
2000-05-11 20:17:28 +00:00
pccbb.c
pccbbreg.h
pccbbvar.h
pci_compat.c
Encapsulate the old PCI compatability support and APIs completely under
2000-05-28 16:35:57 +00:00
pci_if.m
pci.c
Encapsulate the old PCI compatability support and APIs completely under
2000-05-28 16:35:57 +00:00
pcic_p.c
Make this compile without depending on the FreeBSD 2.2 compatability
2000-05-28 16:31:35 +00:00
pcic_p.h
Make this compile without depending on the FreeBSD 2.2 compatability
2000-05-28 16:31:35 +00:00
pcireg.h
Encapsulate the old PCI compatability support and APIs completely under
2000-05-28 16:35:57 +00:00
pcisupport.c
Add OPTi 82C700 chipset.
2000-05-24 09:03:30 +00:00
pcivar.h
Encapsulate the old PCI compatability support and APIs completely under
2000-05-28 16:35:57 +00:00
scsiiom.c
simos.c
Separate the struct bio related stuff out of <sys/buf.h> into
2000-05-05 09:59:14 +00:00
simos.h
ti_fw2.h
ti_fw.h
uhci_pci.c
Add 440MX chipset.
2000-05-24 02:24:38 +00:00
xmaciireg.h
xrpu.c
Do not depend on FreeBSD 2.2 compatability defines.
2000-05-28 16:18:58 +00:00