freebsd-src/sys/mips/adm5120/uart_dev_adm5120.h
Warner Losh 4d9ac6c76f As discussed on IRC and at BSDcan, move the mips32/* directories up a
level.  The distinction was artificial.  Some more movement around the
deck charis is likely depending on the fallout from this one.

Paths were corrected after the svn mv.  Hope that's OK.
2008-07-06 21:09:29 +00:00

81 lines
2.8 KiB
C

/* $NetBSD: uart.h,v 1.1 2007/03/20 08:52:02 dyoung Exp $ */
/*-
* Copyright (c) 2007 Ruslan Ermilov and Vsevolod Lobko.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials provided
* with the distribution.
* 3. The names of the authors may not be used to endorse or promote
* products derived from this software without specific prior
* written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHORS ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
* PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
* OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
* TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
* OF SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _ADMUART_H
#define _ADMUART_H
/* UART registers */
#define UART_DR_REG 0x00
#define UART_RSR_REG 0x04
#define UART_RSR_FE 0x01
#define UART_RSR_PE 0x02
#define UART_RSR_BE 0x04
#define UART_RSR_OE 0x08
#define UART_ECR_REG 0x04
#define UART_ECR_RSR 0x80
#define UART_LCR_H_REG 0x08
#define UART_LCR_H_FEN 0x10
#define UART_LCR_M_REG 0x0c
#define UART_LCR_L_REG 0x10
#define UART_CR_REG 0x14
#define UART_CR_PORT_EN 0x01
#define UART_CR_SIREN 0x02
#define UART_CR_SIRLP 0x04
#define UART_CR_MODEM_STATUS_INT_EN 0x08
#define UART_CR_RX_INT_EN 0x10
#define UART_CR_TX_INT_EN 0x20
#define UART_CR_RX_TIMEOUT_INT_EN 0x40
#define UART_CR_LOOPBACK_EN 0x80
#define UART_FR_REG 0x18
#define UART_FR_CTS 0x01
#define UART_FR_DSR 0x02
#define UART_FR_DCD 0x04
#define UART_FR_BUSY 0x08
#define UART_FR_RX_FIFO_EMPTY 0x10
#define UART_FR_TX_FIFO_FULL 0x20
#define UART_FR_RX_FIFO_FULL 0x40
#define UART_FR_TX_FIFO_EMPTY 0x80
#define UART_IR_REG 0x1c
#define UART_IR_MODEM_STATUS_INT 0x01
#define UART_IR_RX_INT 0x02
#define UART_IR_TX_INT 0x04
#define UART_IR_RX_TIMEOUT_INT 0x08
#define UART_IR_INT_MASK 0x0f
#define UART_IR_UICR 0x80
#define UART_ILPR_REG 0x20
/* UART interrupts */
int uart_cnattach(void);
#endif /* _ADMUART_H */