mirror of
https://github.com/freebsd/freebsd-src.git
synced 2024-12-04 05:58:57 +00:00
377 lines
14 KiB
C
377 lines
14 KiB
C
/* $FreeBSD$ */
|
|
/* $NetBSD: tlsbreg.h,v 1.5 2000/01/27 22:27:50 mjacob Exp $ */
|
|
|
|
/*
|
|
* Copyright (c) 1997, 2000 by Matthew Jacob
|
|
* NASA AMES Research Center.
|
|
* All rights reserved.
|
|
*
|
|
* Based in part upon a prototype version by Jason Thorpe
|
|
* Copyright (c) 1996 by Jason Thorpe.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice immediately at the beginning of the file, without modification,
|
|
* this list of conditions, and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
|
|
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*/
|
|
|
|
/*
|
|
* Definitions for the TurboLaser System Bus found on
|
|
* AlphaServer 8200/8400 systems.
|
|
*/
|
|
|
|
/*
|
|
* There are 9 TurboLaser nodes, 0 though 8. Their uses are defined as
|
|
* follows:
|
|
*
|
|
* Node Module
|
|
* ---- ------
|
|
* 0 CPU, Memory
|
|
* 1 CPU, Memory
|
|
* 2 CPU, Memory
|
|
* 3 CPU, Memory
|
|
* 4 CPU, Memory, I/O
|
|
* 5 CPU, Memory, I/O
|
|
* 6 CPU, Memory, I/O
|
|
* 7 CPU, Memory, I/O
|
|
* 8 I/O
|
|
*
|
|
* A node occurs every 0x00400000 bytes.
|
|
*
|
|
* Note, the AlphaServer 8200 only has nodes 4 though 8.
|
|
*/
|
|
|
|
#define TLSB_NODE_BASE 0x000000ff88000000 /* Dense */
|
|
#define TLSB_NODE_SIZE 0x00400000
|
|
#define TLSB_NODE_MAX 8 /* inclusive */
|
|
|
|
/* Translate a node number to an address. */
|
|
#define TLSB_NODE_ADDR(_node) \
|
|
(long)(TLSB_NODE_BASE + ((_node) * TLSB_NODE_SIZE))
|
|
|
|
#define TLSB_NODE_REG_ADDR(_node, _reg) \
|
|
KV((long)TLSB_NODE_ADDR((_node)) + (_reg))
|
|
|
|
/* Access the specified register on the specified node. */
|
|
#define TLSB_GET_NODEREG(_node, _reg) \
|
|
*(volatile u_int32_t *)(TLSB_NODE_REG_ADDR((_node), (_reg)))
|
|
#define TLSB_PUT_NODEREG(_node, _reg, _val) \
|
|
*(volatile u_int32_t *)(TLSB_NODE_REG_ADDR((_node), (_reg))) = (_val)
|
|
|
|
/*
|
|
* Some registers are shared by all TurboLaser nodes, and appear in
|
|
* the TurboLaser Broadcast space.
|
|
*/
|
|
#define TLSB_BCAST_BASE 0x000000ff8e000000 /* Dense */
|
|
|
|
#define TLSB_BCAST_REG_ADDR(_reg) KV((long)(TLSB_BCASE_BASE + (_reg)))
|
|
|
|
/* Access the specified register in the broadcast space. */
|
|
#define TLSB_GET_BCASTREG(_reg) \
|
|
*(volatile u_int32_t *)(TLSB_BCAST_REG_ADDR + (_reg))
|
|
#define TLSB_PUT_BCASTREG(_reg, _val) \
|
|
*(volatile u_int32_t *)(TLSB_BCAST_REG_ADDR + (_reg)) = (_val)
|
|
|
|
/*
|
|
* Location of the Gbus, the per-CPU bus containing the clock and
|
|
* console hardware.
|
|
*/
|
|
#define TLSB_GBUS_BASE 0x000000ff90000000 /* Dense */
|
|
|
|
/*
|
|
* Note that not every module type supports each TurboLaser register.
|
|
* The following defines the keys used to denote module support for
|
|
* a given register:
|
|
*
|
|
* C Supported by CPU module
|
|
* M Supported by Memory module
|
|
* I Supported by I/O module
|
|
*/
|
|
|
|
/*
|
|
* Per-node TurboLaser System Bus registers, offsets from the
|
|
* base of the node.
|
|
*/
|
|
#define TLDEV 0x0000 /* CMI: Device Register */
|
|
#define TLBER 0x0040 /* CMI: Bus Error Register */
|
|
#define TLCNR 0x0080 /* CMI: Congfiguration Register */
|
|
#define TLVID 0x00c0 /* CM: Virtual ID Register */
|
|
#define TLMMR0 0x0200 /* CM: Memory Mapping Register 0 */
|
|
#define TLMMR1 0x0240 /* CM: Memory Mapping Register 1 */
|
|
#define TLMMR2 0x0280 /* CM: Memory Mapping Register 2 */
|
|
#define TLMMR3 0x02c0 /* CM: Memory Mapping Register 3 */
|
|
#define TLMMR4 0x0300 /* CM: Memory Mapping Register 4 */
|
|
#define TLMMR5 0x0340 /* CM: Memory Mapping Register 5 */
|
|
#define TLMMR6 0x0380 /* CM: Memory Mapping Register 6 */
|
|
#define TLMMR7 0x03c0 /* CM: Memory Mapping Register 7 */
|
|
#define TLFADR0 0x0600 /* MI: Failing Address Register 0 */
|
|
#define TLFADR1 0x0640 /* MI: Failing Address Register 1 */
|
|
#define TLESR0 0x0680 /* CMI: Error Syndrome Register 0 */
|
|
#define TLESR1 0x06c0 /* CMI: Error Syndrome Register 1 */
|
|
#define TLESR2 0x0700 /* CMI: Error Syndrome Register 2 */
|
|
#define TLESR3 0x0740 /* CMI: Error Syndrome Register 3 */
|
|
#define TLILID0 0x0a00 /* I: Int. Level 0 IDENT Register */
|
|
#define TLILID1 0x0a40 /* I: Int. Level 1 IDENT Register */
|
|
#define TLILID2 0x0a80 /* I: Int. Level 2 IDENT Register */
|
|
#define TLILID3 0x0ac0 /* I: Int. Level 3 IDENT Register */
|
|
#define TLCPUMASK 0x0b00 /* I: CPU Interrupt Mask Register */
|
|
#define TLMBPTR 0x0c00 /* I: Mailbox Pointer Register */
|
|
#define TLINTRMASK0 0x1100 /* C: Interrupt Mask Register CPU 0 */
|
|
#define TLINTRMASK1 0x1140 /* C: Interrupt Mask Register CPU 1 */
|
|
#define TLINTRSUM0 0x1180 /* C: Interrupt Sum Register CPU 0 */
|
|
#define TLINTRSUM1 0x11C0 /* C: Interrupt Sum Register CPU 1 */
|
|
#define TLEPAERR 0x1500 /* C: ADG error register */
|
|
#define TLEPDERR 0x1540 /* C: DIGA error register */
|
|
#define TLEPMERR 0x1580 /* C: MMG error register */
|
|
#define TLDMCMD 0x1600 /* C: Data Mover Command */
|
|
#define TLDMADRA 0x1680 /* C: Data Mover Source */
|
|
#define TLDMADRB 0x16C0 /* C: Data Mover Destination */
|
|
|
|
/*
|
|
* Registers shared between TurboLaser nodes, offsets from the
|
|
* TurboLaser Broadcast Base.
|
|
*/
|
|
#define TLPRIVATE 0x0000 /* CMI: private "global" space */
|
|
#define TLIPINTR 0x0040 /* C: Interprocessor Int. Register */
|
|
#define TLIOINTR4 0x0100 /* C: I/O Interrupt Register 4 */
|
|
#define TLIOINTR5 0x0140 /* C: I/O Interrupt Register 5 */
|
|
#define TLIOINTR6 0x0180 /* C: I/O Interrupt Register 6 */
|
|
#define TLIOINTR7 0x01c0 /* C: I/O Interrupt Register 7 */
|
|
#define TLIOINTR8 0x0200 /* C: I/O Interrupt Register 8 */
|
|
#define TLWSDQR4 0x0400 /* C: Win Spc Dcr Que Ctr Reg 4 */
|
|
#define TLWSDQR5 0x0440 /* C: Win Spc Dcr Que Ctr Reg 5 */
|
|
#define TLWSDQR6 0x0480 /* C: Win Spc Dcr Que Ctr Reg 6 */
|
|
#define TLWSDQR7 0x04c0 /* C: Win Spc Dcr Que Ctr Reg 7 */
|
|
#define TLWSDQR8 0x0500 /* C: Win Spc Dcr Que Ctr Reg 8 */
|
|
#define TLRMDQRX 0x0600 /* C: Mem Chan Dcr Que Ctr Reg X */
|
|
#define TLRMDQR8 0x0640 /* C: Mem Chan Dcr Que Ctr Reg 8 */
|
|
#define TLRDRD 0x0800 /* C: CSR Read Data Rtn Data Reg */
|
|
#define TLRDRE 0x0840 /* C: CSR Read Data Rtn Error Reg */
|
|
#define TLMCR 0x1880 /* M: Memory Control Register */
|
|
|
|
/*
|
|
* TLDEV - Device Register
|
|
*
|
|
* Access: R/W
|
|
*
|
|
* Notes:
|
|
* Register is loaded during initialization with information
|
|
* that identifies a node. A zero value indicates a non-initialized
|
|
* (slot empty) node.
|
|
*
|
|
* Bits 0-15 contain the hardware device type, bits 16-23
|
|
* the board's software revision, and bits 24-31 the board's
|
|
* hardware revision.
|
|
*
|
|
* The device type portion is laid out as follows:
|
|
*
|
|
* Bit 15: identifies a CPU
|
|
* Bit 14: identifies a memory board
|
|
* Bit 13: identifies an I/O board
|
|
* Bits 0-7: specify the ID of a node type
|
|
*/
|
|
#define TLDEV_DTYPE_MASK 0x0000ffff
|
|
#define TLDEV_DTYPE_KFTHA 0x2000 /* KFTHA board, I/O */
|
|
#define TLDEV_DTYPE_KFTIA 0x2020 /* KFTIA board, I/O */
|
|
#define TLDEV_DTYPE_MS7CC 0x5000 /* Memory board */
|
|
#define TLDEV_DTYPE_SCPU4 0x8011 /* 1 CPU, 4mb cache */
|
|
#define TLDEV_DTYPE_SCPU16 0x8012 /* 1 CPU, 16mb cache */
|
|
#define TLDEV_DTYPE_DCPU4 0x8014 /* 2 CPU, 4mb cache */
|
|
#define TLDEV_DTYPE_DCPU16 0x8015 /* 2 CPU, 16mb cache */
|
|
|
|
#define TLDEV_DTYPE(_val) ((_val) & TLDEV_DTYPE_MASK)
|
|
# define TLDEV_ISCPU(_val) (TLDEV_DTYPE(_val) & 0x8000)
|
|
# define TLDEV_ISMEM(_val) (TLDEV_DTYPE(_val) & 0x4000)
|
|
# define TLDEV_ISIOPORT(_val) (TLDEV_DTYPE(_val) & 0x2000)
|
|
#define TLDEV_SWREV(_val) (((_val) >> 16) & 0xff)
|
|
#define TLDEV_HWREV(_val) (((_val) >> 24) & 0xff)
|
|
|
|
/*
|
|
* TLBER - Bus Error Register
|
|
*
|
|
* Access: R/W
|
|
*
|
|
* Notes:
|
|
* This register contains information about TLSB errors detected by
|
|
* nodes on the TLSB. The register will become locked when:
|
|
*
|
|
* * Any error occurs and the "lock on first error"
|
|
* bit of the Configuration Register is set.
|
|
*
|
|
* * Any bit other than 20-23 (DS0-DS3) becomes set.
|
|
*
|
|
* and will remain locked until either:
|
|
*
|
|
* * All bits in the TLBER are cleared.
|
|
*
|
|
* * The "lock on first error" bit is cleared.
|
|
*
|
|
* TLBER locking is intended for diagnosic purposes only, and
|
|
* not for general use.
|
|
*/
|
|
#define TLBER_ATCE 0x00000001 /* Addr Transmit Ck Error */
|
|
#define TLBER_APE 0x00000002 /* Addr Parity Error */
|
|
#define TLBER_BAE 0x00000004 /* Bank Avail Violation Error */
|
|
#define TLBER_LKTO 0x00000008 /* Bank Lock Timeout */
|
|
#define TLBER_NAE 0x00000010 /* No Ack Error */
|
|
#define TLBER_RTCE 0x00000020 /* Read Transmit Ck Error */
|
|
#define TLBER_ACKTCE 0x00000040 /* Ack Transmit Ck Error */
|
|
#define TLBER_MMRE 0x00000080 /* Mem Mapping Register Error */
|
|
#define TLBER_FNAE 0x00000100 /* Fatal No Ack Error */
|
|
#define TLBER_REQDE 0x00000200 /* Request Deassertion Error */
|
|
#define TLBER_ATDE 0x00000400 /* Addredd Transmitter During Error */
|
|
#define TLBER_UDE 0x00010000 /* Uncorrectable Data Error */
|
|
#define TLBER_CWDE 0x00020000 /* Correctable Write Data Error */
|
|
#define TLBER_CRDE 0x00040000 /* Correctable Read Data Error */
|
|
#define TLBER_CRDE2 0x00080000 /* ...ditto... */
|
|
#define TLBER_DS0 0x00100000 /* Data Synd 0 */
|
|
#define TLBER_DS1 0x00200000 /* Data Synd 1 */
|
|
#define TLBER_DS2 0x00400000 /* Data Synd 2 */
|
|
#define TLBER_DS3 0x00800000 /* Data Synd 3 */
|
|
#define TLBER_DTDE 0x01000000 /* Data Transmitter During Error */
|
|
#define TLBER_FDTCE 0x02000000 /* Fatal Data Transmit Ck Error */
|
|
#define TLBER_UACKE 0x04000000 /* Unexpected Ack Error */
|
|
#define TLBER_ABTCE 0x08000000 /* Addr Bus Transmit Error */
|
|
#define TLBER_DCTCE 0x10000000 /* Data Control Transmit Ck Error */
|
|
#define TLBER_SEQE 0x20000000 /* Sequence Error */
|
|
#define TLBER_DSE 0x40000000 /* Data Status Error */
|
|
#define TLBER_DTO 0x80000000 /* Data Timeout Error */
|
|
|
|
/*
|
|
* TLCNR - Configuration Register
|
|
*
|
|
* Access: R/W
|
|
*/
|
|
#define TLCNR_CWDD 0x00000001 /* Corr Write Data Err INTR Dis */
|
|
#define TLCNR_CRDD 0x00000002 /* Corr Read Data Err INTR Dis */
|
|
#define TLCNR_LKTOD 0x00000004 /* Bank Lock Timeout Disable */
|
|
#define TLCNR_DTOD 0x00000008 /* Data Timeout Disable */
|
|
#define TLCNR_STF_A 0x00001000 /* Self-Test Fail A */
|
|
#define TLCNR_STF_B 0x00002000 /* Self-Test Fail B */
|
|
#define TLCNR_HALT_A 0x00100000 /* Halt A */
|
|
#define TLCNR_HALT_B 0x00200000 /* Halt B */
|
|
#define TLCNR_RSTSTAT 0x10000000 /* Reset Status */
|
|
#define TLCNR_NRST 0x40000000 /* Node Reset */
|
|
#define TLCNR_LOFE 0x80000000 /* Lock On First Error */
|
|
|
|
#define TLCNR_NODE_MASK 0x000000f0 /* Node ID mask */
|
|
#define TLCNR_NODE_SHIFT 4
|
|
|
|
#define TLCNR_VCNT_MASK 0x00000f00 /* VCNT mask */
|
|
#define TLCNR_VCNT_SHIFT 8
|
|
|
|
/*
|
|
* TLVID - Virtual ID Register
|
|
*
|
|
* Access: R/W
|
|
*
|
|
* Notes:
|
|
* Virtual units can be CPUs or Memory boards. The units are
|
|
* are addressed using virtual IDs. These virtual IDs are assigned
|
|
* by writing to the TLVID register. The upper 24 bits of this
|
|
* register are reserved and must be written as `0'.
|
|
*/
|
|
#define TLVID_VIDA_MASK 0x0000000f /* Virtual ID for unit 0 */
|
|
#define TLVID_VIDA_SHIFT 0
|
|
|
|
#define TLVID_VIDB_MASK 0x000000f0 /* Virtual ID for unit 1 */
|
|
#define TLVID_VIDB_SHIFT 4
|
|
|
|
/*
|
|
* TLMMRn - Memory Mapping Registers
|
|
*
|
|
* Access: W
|
|
*
|
|
* Notes:
|
|
* Contains mapping information for doing a bank-decode.
|
|
*/
|
|
#define TLMMR_INTMASK 0x00000003 /* Valid bits in Interleave */
|
|
#define TLMMR_ADRMASK 0x000000f0 /* Valid bits in Address */
|
|
#define TLMMR_SBANK 0x00000800 /* Single-bank indicator */
|
|
#define TLMMR_VALID 0x80000000 /* Indicated mapping is valid */
|
|
|
|
#define TLMMR_INTLV_MASK 0x00000700 /* Mask for interleave value */
|
|
#define TLMMR_INTLV_SHIFT 8
|
|
|
|
#define TLMMR_ADDRESS_MASK 0x03fff000 /* Mask for address value */
|
|
#define TLMMR_ADDRESS_SHIFT 12
|
|
|
|
/*
|
|
* TLFADRn - Failing Address Registers
|
|
*
|
|
* Access: R/W
|
|
*
|
|
* Notes:
|
|
* These registers contain status information for a failed address.
|
|
* Not all nodes preserve this information. The validation bits
|
|
* indicate the validity of a given field.
|
|
*/
|
|
|
|
|
|
/*
|
|
* CPU Interrupt Mask Register
|
|
*
|
|
* The PAL code reads this register for each CPU on a TLSB CPU board
|
|
* to see what is or isn't enabled.
|
|
*/
|
|
#define TLINTRMASK_CONHALT 0x100 /* Enable ^P Halt */
|
|
#define TLINTRMASK_HALT 0x080 /* Enable Halt */
|
|
#define TLINTRMASK_CLOCK 0x040 /* Enable Clock Interrupts */
|
|
#define TLINTRMASK_XCALL 0x020 /* Enable Interprocessor Interrupts */
|
|
#define TLINTRMASK_IPL17 0x010 /* Enable IPL 17 Interrupts */
|
|
#define TLINTRMASK_IPL16 0x008 /* Enable IPL 16 Interrupts */
|
|
#define TLINTRMASK_IPL15 0x004 /* Enable IPL 15 Interrupts */
|
|
#define TLINTRMASK_IPL14 0x002 /* Enable IPL 14 Interrupts */
|
|
#define TLINTRMASK_DUART 0x001 /* Enable GBUS Duart0 Interrupts */
|
|
|
|
/*
|
|
* CPU Interrupt Summary Register
|
|
*
|
|
* The PAL code reads this register at interrupt time to figure out
|
|
* which interrupt line to assert to the CPU. Note that when the
|
|
* interrupt is actually vectored through the PAL code, it arrives
|
|
* here already presorted as to type (clock, halt, iointr).
|
|
*/
|
|
#define TLINTRSUM_HALT (1 << 28) /* Halted via TLCNR register */
|
|
#define TLINTRSUM_CONHALT (1 << 27) /* Halted via ^P (W1C) */
|
|
#define TLINTRSUM_CLOCK (1 << 6) /* Clock Interrupt (W1C) */
|
|
#define TLINTRSUM_XCALL (1 << 5) /* Interprocessor Int (W1C) */
|
|
#define TLINTRSUM_IPL17 (1 << 4) /* IPL 17 Interrupt Summary */
|
|
#define TLINTRSUM_IPL16 (1 << 3) /* IPL 16 Interrupt Summary */
|
|
#define TLINTRSUM_IPL15 (1 << 2) /* IPL 15 Interrupt Summary */
|
|
#define TLINTRSUM_IPL14 (1 << 1) /* IPL 14 Interrupt Summary */
|
|
#define TLINTRSUM_DUART (1 << 0) /* Duart Int (W1C) */
|
|
/* after checking the summaries, you can get the source node for each level */
|
|
#define TLINTRSUM_IPL17_SOURCE(x) ((x >> 22) & 0x1f)
|
|
#define TLINTRSUM_IPL16_SOURCE(x) ((x >> 17) & 0x1f)
|
|
#define TLINTRSUM_IPL15_SOURCE(x) ((x >> 12) & 0x1f)
|
|
#define TLINTRSUM_IPL14_SOURCE(x) ((x >> 7) & 0x1f)
|
|
|
|
/*
|
|
* (some of) TurboLaser CPU ADG error register defines.
|
|
*/
|
|
#define TLEPAERR_IBOX_TMO 0x1800 /* window space read failed */
|
|
#define TLEPAERR_WSPC_RD 0x0600 /* window space read failed */
|
|
|
|
/*
|
|
* (some of) TurboLaser CPU DIGA error register defines.
|
|
*/
|
|
#define TLEPDERR_GBTMO 0x4 /* GBus timeout */
|