mirror of
https://github.com/freebsd/freebsd-src.git
synced 2024-11-30 00:02:44 +00:00
2a77f569ef
a) the configured default printer entry might turn out to become a security hole Although lpd isn't enabled by default in FreeBSD 4 and later versions bad things might happen because of a simple copy and paste failure: - fill up root-fs, if /dev/lpt0 doesn't exist - fill up the spool dir (either root-fs or var-fs) if machine hadn't been designed as print server Therefore best decision: if people want printing, then configure both 1. /etc/rc.conf 2. /etc/printcap the default entry wouldn't have served well all tastes and needs anyway... design of most of our config files is, to have commented out suggestions if a service is not active. b) [Garance] fix old and wrong documentation: input filters are possible even if you print to a remote printer this makes FreeBSDs implementation of lpd currently the best without having to switch to port monster LPRng ... c) fix pointer to wrong handbook section for a longer time .. so I doesn't fix the number I'm only referring to the printing section, otherwise this would have to be fixed several times, if the chapters should be reordered again ... d) typo: chose -> choose Submitted by: me and some suggestions by Garance Approved by: Eivind and Garance A Drosihn <drosih@rpi.edu> in private e-mail
55 lines
1.9 KiB
Plaintext
55 lines
1.9 KiB
Plaintext
# @(#)printcap 5.3 (Berkeley) 6/30/90
|
|
# $FreeBSD$
|
|
|
|
#
|
|
# This enables a simple local "raw" printer, hooked up to the first
|
|
# parallel port. No kind of filtering is done, so everything you pass
|
|
# to the "lpr" command will be printed unmodified.
|
|
#
|
|
# Remember, for further print queues you're going to add, you have
|
|
# to choose different spool directories (the "sd" capability below),
|
|
# otherwise you will greatly confuse lpd.
|
|
#
|
|
# For some advanced printing, have a look at the "apsfilter" package.
|
|
# It plugs into the lpd system, allowing you to print a variety of
|
|
# different file types by converting everything to PostScript(tm)
|
|
# format. For more information about apsfilter visit
|
|
#
|
|
# http://www.apsfilter.org/
|
|
#
|
|
# If you don't have a PostScript(tm) printer, don't panic, but do
|
|
# also install the latest "ghostscript" package for best printer support.
|
|
#
|
|
# Do also refer to the "printing" section of the handbook.
|
|
#
|
|
# http://www.freebsd.org/handbook/printing.html
|
|
#
|
|
# A local copy can be found under
|
|
#
|
|
# /usr/share/doc/handbook/handbook.{html,latin1}.
|
|
#
|
|
# Banner pages are now suppressed by default. Remove the :sh: capability
|
|
# to turn them back on.
|
|
#
|
|
#lp|local line printer:\
|
|
# :sh:\
|
|
# :lp=/dev/lpt0:sd=/var/spool/output/lpd:lf=/var/log/lpd-errs:
|
|
#
|
|
# Sample remote printer. The physical printer is on machine "lphost".
|
|
# You can perform any kind of local filtering directly. If you need
|
|
# local filters (e.g. LF -> CR-LF conversion for HP printers), create
|
|
# a filter script that sends the proper escape sequence to the printer
|
|
# and then concatenates stdin to stdout.
|
|
#
|
|
#remote|sample remote printer:\
|
|
# :sh:\
|
|
# :rm=lphost:sd=/var/spool/output/lphost:lf=/var/log/lpd-errs:\
|
|
# :if=/usr/local/libexec/if-script:
|
|
#
|
|
# Simple Russian printer with hardware CP866 character set, output filter
|
|
# used for KOI8-R -> CP866 conversion
|
|
#
|
|
#lp|Russian local line printer:\
|
|
# :sh:of=/usr/libexec/lpr/ru/koi2alt:\
|
|
# :lp=/dev/lpt0:sd=/var/spool/output/lpd:lf=/var/log/lpd-errs:
|