freebsd-src/share/mk/bsd.port.mk
Satoshi Asami 0fbb5009b2 Renamed the default package repository ".../packages/.packages" to
".../packages/All".  The "all" category that was automatically added
for every package is gone.

Note that bsd.port.mk requires category names to start with lowercase
names, otherwise it may get confused.

Reviewed by:	jkh

By the way, here is a small script to convert your local package
hierarchy.  Run it in bash, as /bin/sh not only will bark at the
$(.) command substitution but will also botch the [a-z]*/*.tgz
expansion (long-standing and annoying bug, reported before).

cd /usr/ports/packages
mv .packages All
for i in [a-z]*/*.tgz; do
  j=$(basename $i)
  /bin/rm $i
  ln -s ../All/$j $i
done
1995-06-06 10:56:34 +00:00

1145 lines
35 KiB
Makefile

#-*- mode: Fundamental; tab-width: 4; -*-
#
# bsd.port.mk - 940820 Jordan K. Hubbard.
# This file is in the public domain.
#
# $Id: bsd.port.mk,v 1.164 1995/05/29 13:46:38 asami Exp $
#
# Please view me with 4 column tabs!
# Supported Variables and their behaviors:
#
# Variables that typically apply to all ports:
#
# PORTSDIR - The root of the ports tree (default: /usr/ports).
# DISTDIR - Where to get gzip'd, tarballed copies of original sources
# (default: ${PORTSDIR}/distfiles).
# PREFIX - Where to install things in general (default: /usr/local).
# MASTER_SITES - Primary location(s) for distribution files if not found
# locally (default:
# ftp://ftp.freebsd.org/pub/FreeBSD/ports/distfiles)
# PATCH_SITES - Primary location(s) for distributed patch files
# (see PATCHFILES below) if not found locally (default:
# ftp://ftp.freebsd.org/pub/FreeBSD/ports/distfiles)
#
# MASTER_SITE_OVERRIDE - If set, override the MASTER_SITES setting with this
# value.
# MASTER_SITE_FREEBSD - If set, only use the FreeBSD master repository for
# MASTER_SITES.
# PACKAGES - A top level directory where all packages go (rather than
# going locally to each port). (default: ${PORTSDIR}/packages).
# GMAKE - Set to path of GNU make if not in $PATH (default: gmake).
# XMKMF - Set to path of `xmkmf' if not in $PATH (default: xmkmf -a ).
# MAINTAINER - The e-mail address of the contact person for this port
# (default: ports@FreeBSD.ORG).
# CATEGORIES - A list of descriptive categories into which this port falls
# (default: orphans).
# KEYWORDS - A list of descriptive keywords that might index well for this
# port (default: orphans).
#
# Variables that typically apply to an individual port. Non-Boolean
# variables without defaults are *mandatory*.
#
#
# WRKDIR - A temporary working directory that gets *clobbered* on clean
# (default: ${.CURDIR}/work).
# WRKSRC - A subdirectory of ${WRKDIR} where the distribution actually
# unpacks to. (Default: ${WRKDIR}/${DISTNAME} unless
# NO_WRKSUBDIR is set, in which case simply ${WRKDIR}).
# DISTNAME - Name of port or distribution.
# DISTFILES - Name(s) of archive file(s) containing distribution
# (default: ${DISTDIR}/${DISTNAME}${EXTRACT_SUFX}).
# PATCHFILES - Name(s) of additional files that contain distributed
# patches (default: none). make will look for them at
# PATCH_SITES (see above). They will automatically be
# uncompressed before patching if the names end with
# ".gz" or ".Z".
# PATCH_PRFX - Filename prefix for distribution patches (default: none)
# typically ${DISTNAME}/ or foo-
# PKGNAME - Name of the package file to create if the DISTNAME
# isn't really relevant for the port/package
# (default: ${DISTNAME}).
# EXTRACT_ONLY - If defined, a subset of ${DISTFILES} you want to
# actually extract.
# PATCHDIR - A directory containing any additional patches you made
# to port this software to FreeBSD (default:
# ${.CURDIR}/patches)
# SCRIPTDIR - A directory containing any auxiliary scripts
# (default: ${.CURDIR}/scripts)
# FILESDIR - A directory containing any miscellaneous additional files.
# (default: ${.CURDIR}/files)
# PKGDIR - A direction containing any package creation files.
# (default: ${.CURDIR}/pkg)
# PKG_DBDIR - Where package installation is recorded (default: /var/db/pkg)
# FORCE_PKG_REGISTER - If set, it will overwrite any existing package
# registration information in ${PKG_DBDIR}/${PKGNAME}.
#
# NO_EXTRACT - Use a dummy (do-nothing) extract target.
# NO_CONFIGURE - Use a dummy (do-nothing) configure target.
# NO_BUILD - Use a dummy (do-nothing) build target.
# NO_PACKAGE - Use a dummy (do-nothing) package target.
# NO_INSTALL - Use a dummy (do-nothing) install target.
# NO_WRKSUBDIR - Assume port unpacks directly into ${WRKDIR}.
# NO_WRKDIR - There's no work directory at all; port does this someplace
# else.
# NO_DEPENDS - Don't verify build of dependencies.
# USE_GMAKE - Says that the port uses gmake.
# USE_IMAKE - Says that the port uses imake.
# USE_X11 - Says that the port uses X11.
# NO_INSTALL_MANPAGES - For imake ports that don't like the install.man
# target.
# HAS_CONFIGURE - Says that the port has its own configure script.
# GNU_CONFIGURE - Set if you are using GNU configure (optional).
# CONFIGURE_SCRIPT - Name of configure script, defaults to 'configure'.
# CONFIGURE_ARGS - Pass these args to configure, if ${HAS_CONFIGURE} set.
# IS_INTERACTIVE - Set this if your port needs to interact with the user
# during a build. User can then decide to skip this port by
# setting ${BATCH}, or compiling only the interactive ports
# by setting ${INTERACTIVE}.
# EXEC_DEPENDS - A list of "prog:dir" pairs of other ports this
# package depends on. "prog" is the name of an
# executable. make will search your $PATH for it and go
# into "dir" to do a "make all install" if it's not found.
# LIB_DEPENDS - A list of "lib:dir" pairs of other ports this package
# depends on. "lib" is the name of a shared library.
# make will use "ldconfig -r" to search for the
# library. Note that lib can be any regular expression,
# and you need two backslashes in front of dots (.) to
# supress its special meaning (e.g., use
# "foo\\.2\\.:${PORTSDIR}/utils/foo" to match "libfoo.2.*").
# DEPENDS - A list of other ports this package depends on being
# made first. Use this for things that don't fall into
# the above two categories.
# EXTRACT_CMD - Command for extracting archive (default: tar).
# EXTRACT_SUFX - Suffix for archive names (default: .tar.gz).
# EXTRACT_BEFORE_ARGS -
# Arguments to ${EXTRACT_CMD} before filename
# (default: -C ${WRKDIR} -xzf).
# EXTRACT_AFTER_ARGS -
# Arguments to ${EXTRACT_CMD} following filename
# (default: none).
#
# NCFTP - Full path to ncftp command if not in $PATH (default: ncftp).
# NCFTPFLAGS - Arguments to ${NCFTP} (default: -N).
#
#
# Default targets and their behaviors:
#
# fetch - Retrieves ${DISTFILES} (and ${PATCHFILES} if defined)
# into ${DISTDIR} as necessary.
# fetch-list - Show list of files that would be retrieved by fetch
# extract - Unpacks ${DISTFILES} into ${WRKDIR}.
# patch - Apply any provided patches to the source.
# configure - Runs either GNU configure, one or more local configure
# scripts or nothing, depending on what's available.
# build - Actually compile the sources.
# install - Install the results of a build.
# reinstall - Install the results of a build, ignoring "already installed"
# flag.
# package - Create a package from an _installed_ port.
# describe - Try to generate a one-line description for each port for
# use in INDEX files and the like.
# checksum - Use files/md5 to ensure that your distfiles are valid
# makesum - Generate files/md5 (only do this for your own ports!)
#
# Default sequence for "all" is: fetch checksum extract patch configure build
#
# Please read the comments in the targets section below, you
# should be able to use the pre-* or post-* targets/scripts
# (which are available for every stage except checksum) or
# override the do-* targets to do pretty much anything you want.
#
# NEVER override the "regular" targets unless you want to open
# a major can of worms.
.if exists(${.CURDIR}/../Makefile.inc)
.include "${.CURDIR}/../Makefile.inc"
.endif
# These need to be absolute since we don't know how deep in the ports
# tree we are and thus can't go relative. They can, of course, be overridden
# by individual Makefiles.
PORTSDIR?= ${DESTDIR}/usr/ports
X11BASE?= /usr/X11R6
DISTDIR?= ${PORTSDIR}/distfiles
PACKAGES?= ${PORTSDIR}/packages
.if !defined(NO_WRKDIR)
WRKDIR?= ${.CURDIR}/work
.else
WRKDIR?= ${.CURDIR}
.endif
.if defined(NO_WRKSUBDIR)
WRKSRC?= ${WRKDIR}
.else
WRKSRC?= ${WRKDIR}/${DISTNAME}
.endif
PATCHDIR?= ${.CURDIR}/patches
SCRIPTDIR?= ${.CURDIR}/scripts
FILESDIR?= ${.CURDIR}/files
PKGDIR?= ${.CURDIR}/pkg
.if defined(USE_IMAKE) || defined(USE_X11)
PREFIX?= ${X11BASE}
.else
PREFIX?= /usr/local
.endif
.if defined(USE_GMAKE)
EXEC_DEPENDS+= gmake:${PORTSDIR}/devel/gmake
.endif
.if exists(${PORTSDIR}/../Makefile.inc)
.include "${PORTSDIR}/../Makefile.inc"
.endif
# Change these if you'd prefer to keep the cookies someplace else.
EXTRACT_COOKIE?= ${WRKDIR}/.extract_done
CONFIGURE_COOKIE?= ${WRKDIR}/.configure_done
INSTALL_COOKIE?= ${WRKDIR}/.install_done
BUILD_COOKIE?= ${WRKDIR}/.build_done
PATCH_COOKIE?= ${WRKDIR}/.patch_done
PACKAGE_COOKIE?= ${WRKDIR}/.package_done
# How to do nothing. Override if you, for some strange reason, would rather
# do something.
DO_NADA?= echo -n
# Miscellaneous overridable commands:
GMAKE?= gmake
XMKMF?= xmkmf -a
MD5?= /sbin/md5
MD5_FILE?= ${FILESDIR}/md5
MAKE_FLAGS?= -f
MAKEFILE?= Makefile
NCFTP?= ncftp
NCFTPFLAGS?= -N
TOUCH?= touch
TOUCH_FLAGS?= -f
PATCH?= patch
PATCH_STRIP?= -p0
PATCH_DIST_STRIP?= -p0
.if defined(PATCH_DEBUG)
PATCH_ARGS?= -d ${WRKSRC} -E ${PATCH_STRIP}
PATCH_DIST_ARGS?= -d ${WRKSRC} -E ${PATCH_DIST_STRIP}
.else
PATCH_ARGS?= -d ${WRKSRC} --forward --quiet -E ${PATCH_STRIP}
PATCH_DIST_ARGS?= -d ${WRKSRC} --forward --quiet -E ${PATCH_DIST_STRIP}
.endif
EXTRACT_CMD?= tar
EXTRACT_SUFX?= .tar.gz
# Backwards compatability.
.if defined(EXTRACT_ARGS)
EXTRACT_BEFORE_ARGS?= ${EXTRACT_ARGS}
.else
EXTRACT_BEFORE_ARGS?= -xzf
.endif
# Figure out where the local mtree file is
.if !defined(MTREE_LOCAL) && exists(/etc/mtree/BSD.local.dist)
MTREE_LOCAL= /etc/mtree/BSD.local.dist
.endif
MTREE_CMD?= mtree
MTREE_ARGS?= -U -f ${MTREE_LOCAL} -d -e -p
# The user can override the NO_PACKAGE by specifying this from
# the make command line
.if defined(FORCE_PACKAGE)
.undef NO_PACKAGE
.endif
PKG_CMD?= pkg_create
.if !defined(PKG_ARGS)
PKG_ARGS= -v -c ${PKGDIR}/COMMENT -d ${PKGDIR}/DESCR -f ${PKGDIR}/PLIST -p ${PREFIX} -P "`${MAKE} package-depends|sort|uniq`"
.if exists(${PKGDIR}/INSTALL)
PKG_ARGS+= -i ${PKGDIR}/INSTALL
.endif
.if exists(${PKGDIR}/DEINSTALL)
PKG_ARGS+= -k ${PKGDIR}/DEINSTALL
.endif
.if exists(${PKGDIR}/REQ)
PKG_ARGS+= -r ${PKGDIR}/REQ
.endif
.if !defined(USE_X11) && !defined(USE_IMAKE) && defined(MTREE_LOCAL)
PKG_ARGS+= -m ${MTREE_LOCAL}
.endif
.endif
PKG_SUFX?= .tgz
# where pkg_add records its dirty deeds.
PKG_DBDIR?= /var/db/pkg
# Used to print all the '===>' style prompts - override this to turn them off.
ECHO_MSG?= echo
ALL_TARGET?= all
INSTALL_TARGET?= install
# If the user has this set, go to the FreeBSD respository for everything.
.if defined(MASTER_SITE_FREEBSD)
MASTER_SITE_OVERRIDE= ftp://freebsd.cdrom.com/pub/FreeBSD/FreeBSD-current/ports/distfiles/
.endif
# I guess we're in the master distribution business! :) As we gain mirror
# sites for distfiles, add them to this list.
.if !defined(MASTER_SITE_OVERRIDE)
MASTER_SITES+= ftp://ftp.freebsd.org/pub/FreeBSD/FreeBSD-current/ports/distfiles/
PATCH_SITES+= ftp://ftp.freebsd.org/pub/FreeBSD/FreeBSD-current/ports/distfiles/${PATCH_PRFX}
.else
MASTER_SITES= ${MASTER_SITE_OVERRIDE}
PATCH_SITES= ${MASTER_SITE_OVERRIDE}${PATCH_PRFX}
.endif
.if defined(PATCH_PRFX)
PATCHDIST!= echo ${PATCH_PRFX} | sed 's|^\(.*\)/$$|/\1|'
PATCHDIST:= ${DISTDIR}${PATCHDIST}
.else
PATCHDIST:= ${DISTDIR}
.endif
# Derived names so that they're easily overridable.
DISTFILES?= ${DISTNAME}${EXTRACT_SUFX}
PKGNAME?= ${DISTNAME}
# Documentation
MAINTAINER?= ports@FreeBSD.ORG
CATEGORIES?= orphans
KEYWORDS+= ${CATEGORIES}
# Note this has to start with a capital letter (or more accurately, it
# shouldn't match "[a-z]*"), see the target "delete-package-links" below.
PKGREPOSITORYSUBDIR?= All
PKGREPOSITORY?= ${PACKAGES}/${PKGREPOSITORYSUBDIR}
.if exists(${PACKAGES})
PKGFILE?= ${PKGREPOSITORY}/${PKGNAME}${PKG_SUFX}
.else
PKGFILE?= ${PKGNAME}${PKG_SUFX}
.endif
CONFIGURE_SCRIPT?= configure
.if defined(GNU_CONFIGURE)
CONFIGURE_ARGS?= --prefix=${PREFIX}
HAS_CONFIGURE= yes
.endif
.MAIN: all
################################################################
# If we're in BATCH mode and the port is interactive, or we're
# in interactive mode and the port is non-interactive, skip all
# the important targets. The reason we have two modes is that
# one might want to leave a build in BATCH mode running
# overnight, then come back in the morning and do _only_ the
# interactive ones that required your intervention.
#
# This allows you to do both.
################################################################
.if (defined(IS_INTERACTIVE) && defined(BATCH)) || (!defined(IS_INTERACTIVE) && defined(INTERACTIVE))
all:
@${DO_NADA}
build:
@${DO_NADA}
install:
@${DO_NADA}
fetch:
@${DO_NADA}
configure:
@${DO_NADA}
package:
@${DO_NADA}
.endif
.if !target(all)
all: build
.endif
.if !target(is_depended)
is_depended: install
.endif
################################################################
# The following are used to create easy dummy targets for
# disabling some bit of default target behavior you don't want.
# They still check to see if the target exists, and if so don't
# do anything, since you might want to set this globally for a
# group of ports in a Makefile.inc, but still be able to
# override from an individual Makefile.
################################################################
.if defined(NO_EXTRACT) && !target(extract)
extract: checksum
@${TOUCH} ${TOUCH_FLAGS} ${EXTRACT_COOKIE}
checksum: fetch
@${DO_NADA}
makesum:
@${DO_NADA}
.endif
.if defined(NO_CONFIGURE) && !target(configure)
configure: patch
@${TOUCH} ${TOUCH_FLAGS} ${CONFIGURE_COOKIE}
.endif
.if defined(NO_BUILD) && !target(build)
build: configure
@${TOUCH} ${TOUCH_FLAGS} ${BUILD_COOKIE}
.endif
.if defined(NO_PACKAGE) && !target(package)
package:
@${DO_NADA}
.endif
.if defined(NO_PACKAGE) && !target(repackage)
repackage:
@${DO_NADA}
.endif
.if defined(NO_INSTALL) && !target(install)
install: build
@${TOUCH} ${TOUCH_FLAGS} ${INSTALL_COOKIE}
.endif
.if defined(NO_PATCH) && !target(patch)
patch: extract
@${TOUCH} ${TOUCH_FLAGS} ${PATCH_COOKIE}
.endif
################################################################
# More standard targets start here.
#
# These are the body of the build/install framework. If you are
# not happy with the default actions, and you can't solve it by
# adding pre-* or post-* targets/scripts, override these.
################################################################
# Fetch
.if !target(do-fetch)
do-fetch:
@if [ ! -d ${DISTDIR} ]; then mkdir -p ${DISTDIR}; fi
@(cd ${DISTDIR}; \
for file in ${DISTFILES}; do \
if [ ! -f $$file -a ! -f `basename $$file` ]; then \
${ECHO_MSG} ">> $$file doesn't seem to exist on this system."; \
for site in ${MASTER_SITES}; do \
${ECHO_MSG} ">> Attempting to fetch from $${site}"; \
if ${NCFTP} ${NCFTPFLAGS} $${site}$${file}; then \
break; \
fi \
done; \
if [ ! -f $$file -a ! -f `basename $$file` ]; then \
${ECHO_MSG} ">> Couldn't fetch it - please try to retreive this";\
${ECHO_MSG} ">> port manually into ${DISTDIR} and try again."; \
exit 1; \
fi; \
fi \
done)
.if defined(PATCHFILES)
@if [ ! -d ${PATCHDIST} ]; then mkdir -p ${PATCHDIST}; fi
@(cd ${PATCHDIST}; \
for file in ${PATCHFILES}; do \
if [ ! -f $$file -a ! -f `basename $$file` ]; then \
${ECHO_MSG} ">> $$file doesn't seem to exist on this system."; \
for site in ${PATCH_SITES}; do \
${ECHO_MSG} ">> Attempting to fetch from $${site}."; \
if ${NCFTP} ${NCFTPFLAGS} $${site}$${file}; then \
break; \
fi \
done; \
if [ ! -f $$file -a ! -f `basename $$file` ]; then \
${ECHO_MSG} ">> Couldn't fetch it - please try to retreive this";\
${ECHO_MSG} ">> port manually into ${PATCHDIST} and try again."; \
exit 1; \
fi; \
fi \
done)
.endif
.endif
# Extract
.if !target(do-extract)
do-extract:
@rm -rf ${WRKDIR}
@mkdir -p ${WRKDIR}
.if defined(EXTRACT_ONLY)
@for file in ${EXTRACT_ONLY}; do \
if ! (cd ${WRKDIR};${EXTRACT_CMD} ${EXTRACT_BEFORE_ARGS} ${DISTDIR}/$$file ${EXTRACT_AFTER_ARGS});\
then \
exit 1; \
fi \
done
.else
@for file in ${DISTFILES}; do \
if ! (cd ${WRKDIR};${EXTRACT_CMD} ${EXTRACT_BEFORE_ARGS} ${DISTDIR}/$$file ${EXTRACT_AFTER_ARGS});\
then \
exit 1; \
fi \
done
.endif
.endif
# Patch
.if !target(do-patch)
do-patch:
.if defined(PATCHFILES)
@${ECHO_MSG} "===> Applying distributed patches for ${PKGNAME}"
.if defined(PATCH_DEBUG)
@(cd ${PATCHDIST}; \
for i in ${PATCHFILES}; do \
${ECHO_MSG} "===> Applying distributed patch $$i" ; \
case $$i in \
*.Z|*.gz) \
zcat $$i | ${PATCH} ${PATCH_DIST_ARGS}; \
;; \
*) \
${PATCH} ${PATCH_DIST_ARGS} < $$i; \
;; \
esac; \
done)
.else
@(cd ${PATCHDIST}; \
for i in ${PATCHFILES}; do \
case $$i in \
*.Z|*.gz) \
zcat $$i | ${PATCH} ${PATCH_DIST_ARGS}; \
;; \
*) \
${PATCH} ${PATCH_DIST_ARGS} < $$i; \
;; \
esac; \
done)
.endif
.endif
.if defined(PATCH_DEBUG)
@if [ -d ${PATCHDIR} ]; then \
${ECHO_MSG} "===> Applying FreeBSD patches for ${PKGNAME}" ; \
for i in ${PATCHDIR}/patch-*; do \
${ECHO_MSG} "===> Applying FreeBSD patch $$i" ; \
${PATCH} ${PATCH_ARGS} < $$i; \
done; \
fi
@${TOUCH} ${TOUCH_FLAGS} ${PATCH_COOKIE}
.else
@if [ -d ${PATCHDIR} ]; then \
${ECHO_MSG} "===> Applying FreeBSD patches for ${PKGNAME}" ; \
for i in ${PATCHDIR}/patch-*; \
do ${PATCH} ${PATCH_ARGS} < $$i; \
done;\
fi
@${TOUCH} ${TOUCH_FLAGS} ${PATCH_COOKIE}
.endif
.endif
# Configure
.if !target(do-configure)
do-configure:
@if [ -f ${SCRIPTDIR}/configure ]; then \
env CURDIR=${.CURDIR} DISTDIR=${DISTDIR} WRKDIR=${WRKDIR} \
WRKSRC=${WRKSRC} PATCHDIR=${PATCHDIR} SCRIPTDIR=${SCRIPTDIR} \
FILESDIR=${FILESDIR} PORTSDIR=${PORTSDIR} PREFIX=${PREFIX} \
DEPENDS="${DEPENDS}" X11BASE=${X11BASE} \
sh ${SCRIPTDIR}/configure; \
fi
.if defined(HAS_CONFIGURE)
@(cd ${WRKSRC}; CC="${CC}" ac_cv_path_CC="${CC}" CFLAGS="${CFLAGS}" \
INSTALL="/usr/bin/install -c -o ${BINOWN} -g ${BINGRP}" \
INSTALL_PROGRAM="/usr/bin/install ${COPY} ${STRIP} -o ${BINOWN} -g ${BINGRP} -m ${BINMODE}" \
./${CONFIGURE_SCRIPT} ${CONFIGURE_ARGS})
.endif
.if defined(USE_IMAKE)
.if defined(USE_GMAKE)
@(cd ${WRKSRC}; ${XMKMF} && ${GMAKE} Makefiles)
.else
@(cd ${WRKSRC}; ${XMKMF} && ${MAKE} Makefiles)
.endif
.endif
.endif
# Build
.if !target(do-build)
do-build:
.if defined(USE_GMAKE)
@(cd ${WRKSRC}; ${GMAKE} PREFIX=${PREFIX} X11BASE=${X11BASE} ${MAKE_FLAGS} ${MAKEFILE} ${ALL_TARGET})
.else defined(USE_GMAKE)
@(cd ${WRKSRC}; ${MAKE} PREFIX=${PREFIX} X11BASE=${X11BASE} ${MAKE_FLAGS} ${MAKEFILE} ${ALL_TARGET})
.endif
.endif
# Install
.if !target(do-install)
do-install:
.if defined(USE_GMAKE)
@(cd ${WRKSRC}; ${GMAKE} PREFIX=${PREFIX} X11BASE=${X11BASE} ${MAKE_FLAGS} ${MAKEFILE} ${INSTALL_TARGET})
.if defined(USE_IMAKE) && !defined(NO_INSTALL_MANPAGES)
@(cd ${WRKSRC}; ${GMAKE} ${MAKE_FLAGS} ${MAKEFILE} install.man)
.endif
.else defined(USE_GMAKE)
@(cd ${WRKSRC}; ${MAKE} PREFIX=${PREFIX} X11BASE=${X11BASE} ${MAKE_FLAGS} ${MAKEFILE} ${INSTALL_TARGET})
.if defined(USE_IMAKE) && !defined(NO_INSTALL_MANPAGES)
@(cd ${WRKSRC}; ${MAKE} ${MAKE_FLAGS} ${MAKEFILE} install.man)
.endif
.endif
.endif
################################################################
# Skeleton targets start here
#
# You shouldn't have to change these. Either add the pre-* or
# post-* targets/scripts or redefine the do-* targets. These
# targets don't do anything other than checking for cookies and
# call the necessary targets/scripts.
################################################################
# Fetch
.if !target(fetch)
fetch: depends
.if target(pre-fetch)
@${MAKE} ${.MAKEFLAGS} pre-fetch
.endif
@if [ -f ${SCRIPTDIR}/pre-fetch ]; then \
env CURDIR=${.CURDIR} DISTDIR=${DISTDIR} WRKDIR=${WRKDIR} \
WRKSRC=${WRKSRC} PATCHDIR=${PATCHDIR} SCRIPTDIR=${SCRIPTDIR} \
FILESDIR=${FILESDIR} PORTSDIR=${PORTSDIR} PREFIX=${PREFIX} \
DEPENDS="${DEPENDS}" X11BASE=${X11BASE} \
sh ${SCRIPTDIR}/pre-fetch; \
fi
@${MAKE} ${.MAKEFLAGS} do-fetch
.if target(post-fetch)
@${MAKE} ${.MAKEFLAGS} post-fetch
.endif
@if [ -f ${SCRIPTDIR}/post-fetch ]; then \
env CURDIR=${.CURDIR} DISTDIR=${DISTDIR} WRKDIR=${WRKDIR} \
WRKSRC=${WRKSRC} PATCHDIR=${PATCHDIR} SCRIPTDIR=${SCRIPTDIR} \
FILESDIR=${FILESDIR} PORTSDIR=${PORTSDIR} PREFIX=${PREFIX} \
DEPENDS="${DEPENDS}" X11BASE=${X11BASE} \
sh ${SCRIPTDIR}/post-fetch; \
fi
.endif
# Extract
.if !target(extract)
extract: checksum ${EXTRACT_COOKIE}
${EXTRACT_COOKIE}:
@${ECHO_MSG} "===> Extracting for ${PKGNAME}"
.if target(pre-extract)
@${MAKE} ${.MAKEFLAGS} pre-extract
.endif
@if [ -f ${SCRIPTDIR}/pre-extract ]; then \
env CURDIR=${.CURDIR} DISTDIR=${DISTDIR} WRKDIR=${WRKDIR} \
WRKSRC=${WRKSRC} PATCHDIR=${PATCHDIR} SCRIPTDIR=${SCRIPTDIR} \
FILESDIR=${FILESDIR} PORTSDIR=${PORTSDIR} PREFIX=${PREFIX} \
DEPENDS="${DEPENDS}" X11BASE=${X11BASE} \
sh ${SCRIPTDIR}/pre-extract; \
fi
@${MAKE} ${.MAKEFLAGS} do-extract
.if target(post-extract)
@${MAKE} ${.MAKEFLAGS} post-extract
.endif
@if [ -f ${SCRIPTDIR}/post-extract ]; then \
env CURDIR=${.CURDIR} DISTDIR=${DISTDIR} WRKDIR=${WRKDIR} \
WRKSRC=${WRKSRC} PATCHDIR=${PATCHDIR} SCRIPTDIR=${SCRIPTDIR} \
FILESDIR=${FILESDIR} PORTSDIR=${PORTSDIR} PREFIX=${PREFIX} \
DEPENDS="${DEPENDS}" X11BASE=${X11BASE} \
sh ${SCRIPTDIR}/post-extract; \
fi
@${TOUCH} ${TOUCH_FLAGS} ${EXTRACT_COOKIE}
.endif
# Patch
.if !target(patch)
patch: extract ${PATCH_COOKIE}
${PATCH_COOKIE}:
@${ECHO_MSG} "===> Patching for ${PKGNAME}"
.if target(pre-patch)
@${MAKE} ${.MAKEFLAGS} pre-patch
.endif
@if [ -f ${SCRIPTDIR}/pre-patch ]; then \
env CURDIR=${.CURDIR} DISTDIR=${DISTDIR} WRKDIR=${WRKDIR} \
WRKSRC=${WRKSRC} PATCHDIR=${PATCHDIR} SCRIPTDIR=${SCRIPTDIR} \
FILESDIR=${FILESDIR} PORTSDIR=${PORTSDIR} PREFIX=${PREFIX} \
DEPENDS="${DEPENDS}" X11BASE=${X11BASE} \
sh ${SCRIPTDIR}/pre-patch; \
fi
@${MAKE} ${.MAKEFLAGS} do-patch
.if target(post-patch)
@${MAKE} ${.MAKEFLAGS} post-patch
.endif
@if [ -f ${SCRIPTDIR}/post-patch ]; then \
env CURDIR=${.CURDIR} DISTDIR=${DISTDIR} WRKDIR=${WRKDIR} \
WRKSRC=${WRKSRC} PATCHDIR=${PATCHDIR} SCRIPTDIR=${SCRIPTDIR} \
FILESDIR=${FILESDIR} PORTSDIR=${PORTSDIR} PREFIX=${PREFIX} \
DEPENDS="${DEPENDS}" X11BASE=${X11BASE} \
sh ${SCRIPTDIR}/post-patch; \
fi
@${TOUCH} ${TOUCH_FLAGS} ${PATCH_COOKIE}
.endif
# Configure
.if !target(configure)
configure: patch ${CONFIGURE_COOKIE}
${CONFIGURE_COOKIE}:
@${ECHO_MSG} "===> Configuring for ${PKGNAME}"
.if target(pre-configure)
@${MAKE} ${.MAKEFLAGS} pre-configure
.endif
@if [ -f ${SCRIPTDIR}/pre-configure ]; then \
env CURDIR=${.CURDIR} DISTDIR=${DISTDIR} WRKDIR=${WRKDIR} \
WRKSRC=${WRKSRC} PATCHDIR=${PATCHDIR} SCRIPTDIR=${SCRIPTDIR} \
FILESDIR=${FILESDIR} PORTSDIR=${PORTSDIR} PREFIX=${PREFIX} \
DEPENDS="${DEPENDS}" X11BASE=${X11BASE} \
sh ${SCRIPTDIR}/pre-configure; \
fi
@${MAKE} ${.MAKEFLAGS} do-configure
.if target(post-configure)
@${MAKE} ${.MAKEFLAGS} post-configure
.endif
@if [ -f ${SCRIPTDIR}/post-configure ]; then \
env CURDIR=${.CURDIR} DISTDIR=${DISTDIR} WRKDIR=${WRKDIR} \
WRKSRC=${WRKSRC} PATCHDIR=${PATCHDIR} SCRIPTDIR=${SCRIPTDIR} \
FILESDIR=${FILESDIR} PORTSDIR=${PORTSDIR} PREFIX=${PREFIX} \
DEPENDS="${DEPENDS}" X11BASE=${X11BASE} \
sh ${SCRIPTDIR}/post-configure; \
fi
@${TOUCH} ${TOUCH_FLAGS} ${CONFIGURE_COOKIE}
.endif
# Build
.if !target(build)
build: configure ${BUILD_COOKIE}
${BUILD_COOKIE}:
@${ECHO_MSG} "===> Building for ${PKGNAME}"
.if target(pre-build)
@${MAKE} ${.MAKEFLAGS} pre-build
.endif
@if [ -f ${SCRIPTDIR}/pre-build ]; then \
env CURDIR=${.CURDIR} DISTDIR=${DISTDIR} WRKDIR=${WRKDIR} \
WRKSRC=${WRKSRC} PATCHDIR=${PATCHDIR} SCRIPTDIR=${SCRIPTDIR} \
FILESDIR=${FILESDIR} PORTSDIR=${PORTSDIR} PREFIX=${PREFIX} \
DEPENDS="${DEPENDS}" X11BASE=${X11BASE} \
sh ${SCRIPTDIR}/pre-build; \
fi
@${MAKE} ${.MAKEFLAGS} do-build
.if target(post-build)
@${MAKE} ${.MAKEFLAGS} post-build
.endif
@if [ -f ${SCRIPTDIR}/post-build ]; then \
env CURDIR=${.CURDIR} DISTDIR=${DISTDIR} WRKDIR=${WRKDIR} \
WRKSRC=${WRKSRC} PATCHDIR=${PATCHDIR} SCRIPTDIR=${SCRIPTDIR} \
FILESDIR=${FILESDIR} PORTSDIR=${PORTSDIR} PREFIX=${PREFIX} \
DEPENDS="${DEPENDS}" X11BASE=${X11BASE} \
sh ${SCRIPTDIR}/post-build; \
fi
@${TOUCH} ${TOUCH_FLAGS} ${BUILD_COOKIE}
.endif
# Install
.if !target(install)
install: build ${INSTALL_COOKIE}
${INSTALL_COOKIE}:
@${ECHO_MSG} "===> Installing for ${PKGNAME}"
.if !defined(USE_X11) && !defined(USE_IMAKE) && defined(MTREE_LOCAL)
@${MTREE_CMD} ${MTREE_ARGS} ${PREFIX}/;
.endif
.if target(pre-install)
@${MAKE} ${.MAKEFLAGS} pre-install
.endif
@if [ -f ${SCRIPTDIR}/pre-install ]; then \
env CURDIR=${.CURDIR} DISTDIR=${DISTDIR} WRKDIR=${WRKDIR} \
WRKSRC=${WRKSRC} PATCHDIR=${PATCHDIR} SCRIPTDIR=${SCRIPTDIR} \
FILESDIR=${FILESDIR} PORTSDIR=${PORTSDIR} PREFIX=${PREFIX} \
DEPENDS="${DEPENDS}" X11BASE=${X11BASE} \
sh ${SCRIPTDIR}/pre-install; \
fi
@${MAKE} ${.MAKEFLAGS} do-install
.if target(post-install)
@${MAKE} ${.MAKEFLAGS} post-install
.endif
@if [ -f ${SCRIPTDIR}/post-install ]; then \
env CURDIR=${.CURDIR} DISTDIR=${DISTDIR} WRKDIR=${WRKDIR} \
WRKSRC=${WRKSRC} PATCHDIR=${PATCHDIR} SCRIPTDIR=${SCRIPTDIR} \
FILESDIR=${FILESDIR} PORTSDIR=${PORTSDIR} PREFIX=${PREFIX} \
DEPENDS="${DEPENDS}" X11BASE=${X11BASE} \
sh ${SCRIPTDIR}/post-install; \
fi
@${MAKE} ${.MAKEFLAGS} fake-pkg
@${TOUCH} ${TOUCH_FLAGS} ${INSTALL_COOKIE}
.endif
# Reinstall
#
# This is a special target to re-run install
.if !target(reinstall)
reinstall: pre-reinstall install
pre-reinstall:
@rm -f ${INSTALL_COOKIE}
@rm -f ${PACKAGE_COOKIE}
.endif
################################################################
# Some more targets supplied for users' convenience
################################################################
# Cleaning up
.if !target(pre-clean)
pre-clean:
@${DO_NADA}
.endif
.if !target(clean)
clean: pre-clean
@${ECHO_MSG} "===> Cleaning for ${PKGNAME}"
@rm -f ${EXTRACT_COOKIE} ${CONFIGURE_COOKIE} ${INSTALL_COOKIE} \
${BUILD_COOKIE} ${PATCH_COOKIE}
.if defined(NO_WRKDIR)
@rm -f ${WRKDIR}/.*_done
.else
@rm -rf ${WRKDIR}
.endif
.endif
# Prints out a list of files to fetch (useful to do a batch fetch)
.if !target(fetch-list)
fetch-list:
@if [ ! -d ${DISTDIR} ]; then mkdir -p ${DISTDIR}; fi
@(cd ${DISTDIR}; \
for file in ${DISTFILES}; do \
if [ ! -f $$file -a ! -f `basename $$file` ]; then \
for site in ${MASTER_SITES}; do \
echo -n ${NCFTP} ${NCFTPFLAGS} $${site}$${file} '||' ; \
break; \
done; \
echo "echo $${file} not fetched" ; \
fi \
done)
.if defined(PATCHFILES)
@(cd ${DISTDIR}; \
for file in ${PATCHFILES}; do \
if [ ! -f $$file -a ! -f `basename $$file` ]; then \
for site in ${PATCH_SITES}; do \
echo -n ${NCFTP} ${NCFTPFLAGS} $${site}$${file} ${PATCH_PRFX}$${file} '||' ; \
break; \
done; \
echo "echo $${file} not fetched" ; \
fi \
done)
.endif
.endif
# Checksumming utilities
.if !target(makesum)
makesum: fetch
@if [ ! -d ${FILESDIR} ]; then mkdir -p ${FILESDIR}; fi
@if [ -f ${MD5_FILE} ]; then rm -f ${MD5_FILE}; fi
@(cd ${DISTDIR}; \
for file in ${DISTFILES} ${PATCHFILES:S|^|${PATCH_PRFX}|}; do \
${MD5} $$file >> ${MD5_FILE}; \
done)
.endif
.if !target(checksum)
checksum: fetch
@if [ ! -f ${MD5_FILE} ]; then \
${ECHO_MSG} ">> No MD5 checksum file."; \
else \
(cd ${DISTDIR}; OK=""; \
for file in ${DISTFILES} ${PATCHFILES:S|^|${PATCH_PRFX}|}; do \
CKSUM=`${MD5} $$file | awk '{print $$4}'`; \
CKSUM2=`grep "($$file)" ${MD5_FILE} | awk '{print $$4}'`; \
if [ "$$CKSUM2" = "" ]; then \
${ECHO_MSG} ">> No checksum recorded for $$file"; \
OK="false"; \
elif [ "$$CKSUM" != "$$CKSUM2" ]; then \
${ECHO_MSG} ">> Checksum mismatch for $$file"; \
exit 1; \
fi; \
done; \
if [ "$$OK" = "" ]; then \
${ECHO_MSG} "Checksums OK."; \
else \
${ECHO_MSG} "Checksums OK for files that have them."; \
fi) ; \
fi
.endif
################################################################
# The package-building targets
# You probably won't need to touch these
################################################################
# Nobody should want to override this unless PKGNAME is simply bogus.
.if !target(package-name)
package-name:
.if !defined(NO_PACKAGE)
@echo ${PKGNAME}
.endif
.endif
# Show (recursively) all the packages this package depends on.
.if !target(package-depends)
package-depends:
@for i in ${EXEC_DEPENDS} ${LIB_DEPENDS} ${DEPENDS}; do \
dir=`echo $$i | sed -e 's/.*://'`; \
(cd $$dir ; ${MAKE} package-name package-depends); \
done
.endif
# Build a package
.if !target(package)
package: install ${PACKAGE_COOKIE}
${PACKAGE_COOKIE}:
.if target(pre-package)
@${MAKE} ${.MAKEFLAGS} pre-package
.endif
@${MAKE} ${.MAKEFLAGS} do-package
@${TOUCH} ${TOUCH_FLAGS} ${PACKAGE_COOKIE}
.endif
# Build a package but don't check the package cookie
.if !target(repackage)
repackage: pre-repackage package
pre-repackage:
@rm -f ${PACKAGE_COOKIE}
.endif
# Build a package but don't check the cookie for installation, also don't
# install package cookie
.if !target(package-noinstall)
package-noinstall:
.if target(pre-package)
@${MAKE} ${.MAKEFLAGS} pre-package
.endif
@${MAKE} ${.MAKEFLAGS} do-package
.endif
# The body of the package-building target
.if !target(do-package)
do-package:
@if [ -e ${PKGDIR}/PLIST ]; then \
${ECHO_MSG} "===> Building package for ${PKGNAME}"; \
if [ -d ${PACKAGES} ]; then \
if [ ! -d ${PKGREPOSITORY} ]; then \
if ! mkdir -p ${PKGREPOSITORY}; then \
${ECHO_MSG} ">> Can't create directory ${PKGREPOSITORY}."; \
exit 1; \
fi; \
fi; \
fi; \
if ${PKG_CMD} ${PKG_ARGS} ${PKGFILE}; then \
if [ -d ${PACKAGES} ]; then \
${MAKE} ${.MAKEFLAGS} package-links; \
fi; \
else \
${MAKE} ${.MAKEFLAGS} delete-package; \
exit 1; \
fi; \
fi
.endif
.if !target(package-links)
package-links:
@${MAKE} ${.MAKEFLAGS} delete-package-links
@for cat in ${CATEGORIES}; do \
if [ ! -d ${PACKAGES}/$$cat ]; then \
if ! mkdir -p ${PACKAGES}/$$cat; then \
${ECHO_MSG} ">> Can't create directory ${PACKAGES}/$$cat."; \
exit 1; \
fi; \
fi; \
ln -s ../${PKGREPOSITORYSUBDIR}/${PKGNAME}${PKG_SUFX} ${PACKAGES}/$$cat; \
done;
.endif
.if !target(delete-package-links)
delete-package-links:
@rm -f ${PACKAGES}/[a-z]*/${PKGNAME}${PKG_SUFX};
.endif
.if !target(delete-package)
delete-package:
@${MAKE} ${.MAKEFLAGS} delete-package-links
@rm -f ${PKGFILE}
.endif
################################################################
# Dependency checking
################################################################
.if !target(depends)
depends: exec_depends lib_depends misc_depends
exec_depends:
.if defined(EXEC_DEPENDS)
.if defined(NO_DEPENDS)
# Just print out messages
@for i in ${EXEC_DEPENDS}; do \
prog=`echo $$i | sed -e 's/:.*//'`; \
dir=`echo $$i | sed -e 's/.*://'`; \
${ECHO_MSG} "===> ${PKGNAME} depends on executable: $$prog ($$dir)"; \
done
.else
@for i in ${EXEC_DEPENDS}; do \
prog=`echo $$i | sed -e 's/:.*//'`; \
dir=`echo $$i | sed -e 's/.*://'`; \
if which -s "$$prog"; then \
${ECHO_MSG} "===> ${PKGNAME} depends on executable: $$prog - found"; \
else \
${ECHO_MSG} "===> ${PKGNAME} depends on executable: $$prog - not found"; \
${ECHO_MSG} "===> Verifying build for $$prog in $$dir"; \
if [ ! -d "$$dir" ]; then \
${ECHO_MSG} ">> No directory for $$prog. Skipping.."; \
else \
(cd $$dir; ${MAKE} ${.MAKEFLAGS} is_depended) ; \
${ECHO_MSG} "===> Returning to build of ${PKGNAME}"; \
fi; \
fi; \
done
.endif
.else
@${DO_NADA}
.endif
lib_depends:
.if defined(LIB_DEPENDS)
.if defined(NO_DEPENDS)
# Just print out messages
@for i in ${LIB_DEPENDS}; do \
lib=`echo $$i | sed -e 's/:.*//'`; \
dir=`echo $$i | sed -e 's/.*://'`; \
${ECHO_MSG} "===> ${PKGNAME} depends on shared library: $$lib ($$dir)"; \
done
.else
@for i in ${LIB_DEPENDS}; do \
lib=`echo $$i | sed -e 's/:.*//'`; \
dir=`echo $$i | sed -e 's/.*://'`; \
if ldconfig -r | grep -q -e "-l$$lib"; then \
${ECHO_MSG} "===> ${PKGNAME} depends on shared library: $$lib - found"; \
else \
${ECHO_MSG} "===> ${PKGNAME} depends on shared library: $$lib - not found"; \
${ECHO_MSG} "===> Verifying build for $$lib in $$dir"; \
if [ ! -d "$$dir" ]; then \
${ECHO_MSG} ">> No directory for $$lib. Skipping.."; \
else \
(cd $$dir; ${MAKE} ${.MAKEFLAGS} is_depended) ; \
${ECHO_MSG} "===> Returning to build of ${PKGNAME}"; \
fi; \
fi; \
done
.endif
.else
@${DO_NADA}
.endif
misc_depends:
.if defined(DEPENDS)
@${ECHO_MSG} "===> ${PKGNAME} depends on: ${DEPENDS}"
.if !defined(NO_DEPENDS)
@for i in ${DEPENDS}; do \
${ECHO_MSG} "===> Verifying build for $$i"; \
if [ ! -d $$i ]; then \
${ECHO_MSG} ">> No directory for $$i. Skipping.."; \
else \
(cd $$i; ${MAKE} ${.MAKEFLAGS} is_depended) ; \
fi \
done
@${ECHO_MSG} "===> Returning to build of ${PKGNAME}"
.endif
.else
@${DO_NADA}
.endif
.endif
################################################################
# Everything after here are internal targets and really
# shouldn't be touched by anybody but the release engineers.
################################################################
# This target generates an index entry suitable for aggregation into
# a large index. Format is:
#
# distribution-name|port-path|installation-prefix|comment| \
# description-file|maintainer|categories|keywords
#
.if !target(describe)
describe:
@echo -n "${PKGNAME}|${.CURDIR}/${PKGNAME}|"
@echo -n "${PREFIX}|"
@if [ -f ${PKGDIR}/COMMENT ]; then \
echo -n "`cat ${PKGDIR}/COMMENT`"; \
else \
echo -n "** No Description"; \
fi
@if [ -f ${PKGDIR}/DESCR ]; then \
echo -n "|${PKGDIR}/DESCR"; \
else \
echo -n "|/dev/null"; \
fi
@echo -n "|${MAINTAINER}|${CATEGORIES}|${KEYWORDS}"
@echo ""
.endif
# Fake installation of package so that user can pkg_delete it later.
# Also, make sure that an installed port is recognized correctly in
# accordance to the @pkgdep directive in the packing lists
.if !target(fake-pkg)
fake-pkg:
@if [ ! -f ${PKGDIR}/PLIST -o ! -f ${PKGDIR}/COMMENT -o ! -f ${PKGDIR}/DESCR ]; then echo "** Missing package files for ${PKGNAME} - installation not recorded."; exit 1; fi
@if [ ! -d ${PKG_DBDIR} ]; then rm -f ${PKG_DBDIR}; mkdir -p ${PKG_DBDIR}; fi
.if defined(FORCE_PKG_REGISTER)
@rm -rf ${PKG_DBDIR}/${PKGNAME}
.endif
@if [ ! -d ${PKG_DBDIR}/${PKGNAME} ]; then \
${ECHO_MSG} "===> Registering installation for ${PKGNAME}"; \
mkdir -p ${PKG_DBDIR}/${PKGNAME}; \
${PKG_CMD} ${PKG_ARGS} -O ${PKGFILE} > ${PKG_DBDIR}/${PKGNAME}/+CONTENTS; \
cp ${PKGDIR}/DESCR ${PKG_DBDIR}/${PKGNAME}/+DESC; \
cp ${PKGDIR}/COMMENT ${PKG_DBDIR}/${PKGNAME}/+COMMENT; \
if [ -f ${PKGDIR}/INSTALL ]; then cp ${PKGDIR}/INSTALL ${PKG_DBDIR}/${PKGNAME}/+INSTALL; fi; \
if [ -f ${PKGDIR}/DEINSTALL ]; then cp ${PKGDIR}/DEINSTALL ${PKG_DBDIR}/${PKGNAME}/+DEINSTALL; fi; \
if [ -f ${PKGDIR}/REQ ]; then cp ${PKGDIR}/REQ ${PKG_DBDIR}/${PKGNAME}/+REQ; fi; \
else \
${ECHO_MSG} "===> ${PKGNAME} is already installed - perhaps an older version?"; \
${ECHO_MSG} " If so, you may wish to \`\`pkg_delete ${PKGNAME}'' and install"; \
${ECHO_MSG} " this port again to upgrade it properly."; \
fi
.endif
# Depend is generally meaningless for arbitrary ports, but if someone wants
# one they can override this. This is just to catch people who've gotten into
# the habit of typing `make depend all install' as a matter of course.
#
.if !target(depend)
depend:
.endif
# Same goes for tags
.if !target(tags)
tags:
.endif