freebsd-src/etc/devd.conf
Nate Lawson 526785c638 Notify the user (at kern.emerg) that the system will be shutting down if
it is still above the critical temperature on the next poll cycle.  This
is a 10 second advance notice by default.  Document the private
(non-standard) notify we will be using with devd(8).
2004-02-03 04:18:56 +00:00

140 lines
4.4 KiB
Plaintext

# $FreeBSD$
#
# Refer to devd.conf(5) and devd(8) man pages for the details on how to
# run and configure devd.
#
# NB: All regular expressions have an implicit ^$ around them.
# NB: device-name is shorthand for 'match device-name'
options {
# Each directory directive adds a directory the list of directories
# that we scan for files. Files are read-in in the order that they
# are returned from readdir(3). The rule-sets are combined to
# create a DFA that's used to match events to actions.
directory "/etc/devd";
directory "/usr/local/etc/devd";
pid-file "/var/run/devd.pid";
# Setup some shorthand for regex that we use later in the file.
set ethernet-nic-regex
"(an|ar|ath|aue|awi|bfe|bge|cm|cnw|cs|cue|dc|de|ed|el|em|ep|\
ex|fe|fxp|gem|gx|hme|ie|kue|lge|lnc|my|nge|pcn|ray|re|rl|rue|\
sf|sis|sk|sn|snc|ste|ti|tl|tx|txp|vr|vx|wb|wi|xe|xl)[0-9]+";
set scsi-controller-regex
"(adv|advw|aic|aha|ahb|ahc|ahd|bt|ct|iir|isp|mly|mpt|ncv|nsp|\
stg|sym|wds)[0-9]+";
};
# Note that the attach/detach with the highest value wins, so that one can
# override these general rules.
#
# For ethernet like devices, the default is to run dhclient. Due to
# a historical accident, the name of this script it called pccard_ether
#
attach 0 {
device-name "$ethernet-nic-regex";
action "/etc/pccard_ether $device-name start";
};
detach 0 {
device-name "$ethernet-nic-regex";
action "/etc/pccard_ether $device-name stop";
};
# An entry like this might be in a different file, but is included here
# as an example of how to override things. Normally 'ed50' would match
# the above attach/detach stuff, but the value of 100 makes it
# ed50 is hard wired to 1.2.3.4
attach 100 {
device-name "ed50";
action "ifconfig $device-name inet 1.2.3.4 netmask 0xffff0000";
};
detach 100 {
device-name "ed50";
};
#
# Rescan scsi device-names on attach, but not detach.
#
attach 0 {
device-name "$scsi-controller-regex";
action "camcontrol rescan all";
};
# Don't even try to second guess what to do about drivers that don't
# match here. Instead, pass it off to syslog. Commented out for the
# moment, as pnpinfo isn't set in devd yet
nomatch 0 {
# action "logger Unknown device: $pnpinfo $location $bus";
};
# Switch power profiles when the AC line state changes
notify 10 {
match "system" "ACPI";
match "subsystem" "ACAD";
action "/etc/rc.d/power_profile $notify";
};
# Notify all users before beginning emergency shutdown when we get
# a _CRT or _HOT thermal event and we're going to power down the system
# very soon.
notify 10 {
match "system" "ACPI";
match "subsystem" "Thermal";
match "notify" "0xcc";
action "logger -p kern.emerg 'WARNING: system temperature too high, shutting down soon!'";
};
/* EXAMPLES TO END OF FILE
# The following might be an example of something that a vendor might
# install if you were to add their device. This might reside in
# /usr/local/etc/devd/deqna.conf. A deqna is, in this hypothetical
# example, a pccard ethernet-like device. Students of history may
# know other devices by this name, and will get the in-jokes in this
# entry.
nomatch 10 {
match "bus" "pccard[0-9]+";
match "manufacturer" "0x1234";
match "product" "0x2323";
action "kldload if_deqna";
};
attach 10 {
device-name "deqna[0-9]+";
action "/etc/pccard_ether $device-name start";
};
detach 10 {
device-name "deqna[0-9]+";
action "/etc/pccard_ether $device-name stop";
};
# Examples of notify hooks. A notify is a generic way for a kernel
# subsystem to send event notification to userland.
#
# Here are some examples of ACPI notify handlers. ACPI subsystems that
# generate notifies include the AC adapter, power/sleep buttons,
# control method batteries, lid switch, and thermal zones.
#
# Information returned is not always the same as the ACPI notify
# events. See the ACPI specification for more information about
# notifies. Here is the information returned for each subsystem:
#
# ACAD: AC line state (0 is offline, 1 is online)
# Button: Button pressed (0 for power, 1 for sleep)
# CMBAT: ACPI battery events
# Lid: Lid state (0 is closed, 1 is open)
# Thermal: ACPI thermal zone events
#
# This example calls a script when the AC state changes, passing the
# notify value as the first argument. If the state is 0x00, it might
# call some sysctls to implement economy mode. If 0x01, it might set
# the mode to performance.
notify 10 {
match "system" "ACPI";
match "subsystem" "ACAD";
action "/etc/acpi_ac $notify";
};
*/