mirror of
https://github.com/freebsd/freebsd-src.git
synced 2024-12-04 18:59:37 +00:00
93 lines
3.1 KiB
Plaintext
93 lines
3.1 KiB
Plaintext
#
|
|
# $FreeBSD$
|
|
#
|
|
#
|
|
# Configuration file for natd.
|
|
#
|
|
#
|
|
# Enable logging to file /var/log/alias.log
|
|
#
|
|
log no
|
|
#
|
|
# Incoming connections. Should NEVER be set to "yes" if redirect_port
|
|
# or redirect_address statements are activated in this file!
|
|
#
|
|
# Setting to yes provides additional anti-crack protection
|
|
#
|
|
deny_incoming no
|
|
#
|
|
# Use sockets to avoid port clashes. Uses additional system resources, but
|
|
# guarantees successful connections when port numbers conflict
|
|
#
|
|
use_sockets no
|
|
#
|
|
# Avoid port changes if possible when altering outbound packets. Makes rlogin
|
|
# work in most cases.
|
|
#
|
|
same_ports yes
|
|
#
|
|
# Verbose mode. Enables dumping of packets and disables
|
|
# forking to background. Only set to yes for debugging.
|
|
#
|
|
verbose no
|
|
#
|
|
# Divert port. Can be a name in /etc/services or numeric value.
|
|
#
|
|
port 32000
|
|
#
|
|
# Interface name or address being aliased. Either one,
|
|
# not both is required.
|
|
#
|
|
# Obtain interface name from the command output of "ifconfig -a"
|
|
#
|
|
# alias_address 192.168.0.1
|
|
interface ep0
|
|
#
|
|
# Alias unregistered addresses or all addresses. Set this to yes if
|
|
# the inside network is all RFC1918 addresses.
|
|
#
|
|
unregistered_only no
|
|
#
|
|
# Configure permanent links. If you use host names instead
|
|
# of addresses here, be sure that name server works BEFORE
|
|
# natd is up - this is usually not the case. So either use
|
|
# numeric addresses or hosts that are in /etc/hosts.
|
|
#
|
|
# Note: Current versions of FreeBSD all call /etc/rc.firewall
|
|
# BEFORE running named, so if the DNS server and NAT are on the same
|
|
# machine, the nameserver won't be up if natd is called from /etc/rc.firewall
|
|
#
|
|
# Map connections coming to port 30000 to telnet in my_private_host.
|
|
# Remember to allow the connection /etc/rc.firewall also.
|
|
#
|
|
#redirect_port tcp my_private_host:telnet 30000
|
|
#
|
|
# Map connections coming from host.xyz.com to port 30001 to
|
|
# telnet in another_host.
|
|
#redirect_port tcp another_host:telnet 30001 host.xyz.com
|
|
#
|
|
# Static NAT address mapping:
|
|
#
|
|
# ipconfig must apply any legal IP numbers that inside hosts
|
|
# will be known by to the outside interface. These are sometimes known as
|
|
# virtual IP numbers. It's suggested to use the "interface" directive
|
|
# instead of the "alias_address" directive to make it more clear what is
|
|
# going on. (although both will work)
|
|
#
|
|
# DNS in this situation can get hairy. For example, an inside host
|
|
# named aweb.company.com is located at 192.168.1.56, and needs to be
|
|
# accessible through a legal IP number like 198.105.232.1. If both
|
|
# 192.168.1.56 and 198.105.232.1 are set up as address records in the DNS
|
|
# for aweb.company.com, then external hosts attempting to access
|
|
# aweb.company.com may use address 192.168.1.56 which is inaccessible to them.
|
|
#
|
|
# The obvious solution is to use only a single address for the name, the
|
|
# outside address. However, this creates needless traffic through the
|
|
# NAT, because inside hosts will go through the NAT to get to the legal
|
|
# number, even when the inside number is on the same subnet as they are!
|
|
#
|
|
# It's probably not a good idea to use DNS names in redirect_address statements
|
|
#
|
|
#The following mapping points outside address 198.105.232.1 to 192.168.1.56
|
|
#redirect_address 192.168.1.56 198.105.232.1
|