mirror of
https://github.com/freebsd/freebsd-src.git
synced 2024-11-30 04:22:44 +00:00
182 lines
6.5 KiB
C
182 lines
6.5 KiB
C
/*-
|
|
* TODO:
|
|
* [1] integrate into current if_ed.c
|
|
* [2] parse tuples to find out where to map the shared memory buffer,
|
|
* and what to write into the configuration register
|
|
* [3] move pcic-specific code into a separate module.
|
|
*
|
|
* Device driver for IBM PCMCIA Credit Card Adapter for Ethernet,
|
|
* if_ze.c
|
|
*
|
|
* Based on the Device driver for National Semiconductor DS8390 ethernet
|
|
* adapters by David Greenman. Modifications for PCMCIA by Keith Moore.
|
|
* Adapted for FreeBSD 1.1.5 by Jordan Hubbard.
|
|
*
|
|
* Currently supports only the IBM Credit Card Adapter for Ethernet, but
|
|
* could probably work with other PCMCIA cards also, if it were modified
|
|
* to get the locations of the PCMCIA configuration option register (COR)
|
|
* by parsing the configuration tuples, rather than by hard-coding in
|
|
* the value expected by IBM's card.
|
|
*
|
|
* Sources for data on the PCMCIA/IBM CCAE specific portions of the driver:
|
|
*
|
|
* [1] _Local Area Network Credit Card Adapters Technical Reference_,
|
|
* IBM Corp., SC30-3585-00, part # 33G9243.
|
|
* [2] "pre-alpha" PCMCIA support code for Linux by Barry Jaspan.
|
|
* [3] Intel 82536SL PC Card Interface Controller Data Sheet, Intel
|
|
* Order Number 290423-002
|
|
* [4] National Semiconductor DP83902A ST-NIC (tm) Serial Network
|
|
* Interface Controller for Twisted Pair data sheet.
|
|
*
|
|
*
|
|
* Copyright (C) 1993, David Greenman. This software may be used, modified,
|
|
* copied, distributed, and sold, in both source and binary form provided
|
|
* that the above copyright and these terms are retained. Under no
|
|
* circumstances is the author responsible for the proper functioning
|
|
* of this software, nor does the author assume any responsibility
|
|
* for damages incurred with its use.
|
|
*/
|
|
|
|
#ifndef __PCIC_H__
|
|
#define __PCIC_H__
|
|
|
|
/*****************************************************************************
|
|
* pcmcia controller chip (PCIC) support *
|
|
* (eventually, move this to a separate file) *
|
|
*****************************************************************************/
|
|
#include <i386/isa/ic/i82365.h>
|
|
|
|
/*
|
|
* Each PCIC chip (82365SL or clone) can handle two card slots, and there
|
|
* can be up to four PCICs in a system. (On some machines, not all of the
|
|
* address lines are decoded, so a card may appear to be in more than one
|
|
* slot.)
|
|
*/
|
|
#define MAXSLOT 8
|
|
|
|
/*
|
|
* To access a register on the PCIC for a particular slot, you
|
|
* first write the correct OFFSET value for that slot in the
|
|
* INDEX register for the PCIC controller. You then read or write
|
|
* the value from or to the DATA register for that controller.
|
|
*
|
|
* The first pair of chips shares I/O addresses for DATA and INDEX,
|
|
* as does the second pair. (To the programmer, it looks like each
|
|
* pair is a single chip.) The i/o port addresses are hard-wired
|
|
* into the PCIC; so the following addresses should be valid for
|
|
* any machine that uses this chip.
|
|
*/
|
|
|
|
#define PCIC_INDEX_0 0x3E0 /* index reg, chips 0 and 1 */
|
|
#define PCIC_DATA_0 0x3E1 /* data register, chips 0 and 1 */
|
|
#define PCIC_INDEX_1 0x3E2 /* index reg, chips 1 and 2 */
|
|
#define PCIC_DATA_1 0x3E3 /* data register, chips 1 and 2 */
|
|
|
|
/*
|
|
* Given a slot number, calculate the INDEX and DATA registers
|
|
* to talk to that slot. OFFSET is added to the register number
|
|
* to address the registers for a particular slot.
|
|
*/
|
|
#define INDEX(slot) ((slot) < 4 ? PCIC_INDEX_0 : PCIC_INDEX_1)
|
|
#define DATA(slot) ((slot) < 4 ? PCIC_DATA_0 : PCIC_DATA_1)
|
|
#define OFFSET(slot) ((slot) % 4 * 0x40)
|
|
|
|
/*
|
|
* There are 5 sets (windows) of memory mapping registers on the PCIC chip
|
|
* for each slot, numbered 0..4.
|
|
*
|
|
* They start at 10/50 hex within the chip's register space (not system
|
|
* I/O space), and are eight addresses apart. These are actually pairs of
|
|
* 8-bit-wide registers (low byte first, then high byte) since the
|
|
* address fields are actually 12 bits long. The upper bits are used
|
|
* for other things like 8/16-bit select and wait states.
|
|
*
|
|
* Memory mapping registers include start/stop addresses to define the
|
|
* region to be mapped (in terms of system memory addresses), and
|
|
* an offset register to allow for translation from system space
|
|
* to card space. The lower 12 bits aren't included in these, so memory is
|
|
* mapped in 4K chunks.
|
|
*/
|
|
#define MEM_START_ADDR(window) (((window) * 0x08) + 0x10)
|
|
#define MEM_STOP_ADDR(window) (((window) * 0x08) + 0x12)
|
|
#define MEM_OFFSET(window) (((window) * 0x08) + 0x14)
|
|
/*
|
|
* this bit gets set in the address window enable register (PCIC_ADDRWINE)
|
|
* to enable a particular address window.
|
|
*/
|
|
#define MEM_ENABLE_BIT(window) ((1) << (window))
|
|
|
|
/*
|
|
* There are two i/o port addressing windows. I/O ports cannot be
|
|
* relocated within system i/o space (unless the card doesn't decode
|
|
* all of the address bits); unlike card memory, there is no address
|
|
* translation offset.
|
|
*/
|
|
#define IO_START_ADDR(window) ((window) ? PCIC_IO1_STL : PCIC_IO0_STL)
|
|
#define IO_STOP_ADDR(window) ((window) ? PCIC_IO1_SPL : PCIC_IO0_SPL)
|
|
#define IO_ENABLE_BIT(window) ((window) ? PCIC_IO1_EN : PCIC_IO0_EN)
|
|
#define IO_CS16_BIT(window) ((window) ? PCIC_IO1_CS16 : PCIC_IO0_CS16)
|
|
|
|
/*
|
|
* types of mapped memory
|
|
*/
|
|
enum memtype { COMMON, ATTRIBUTE };
|
|
|
|
/*
|
|
* read a byte from a pcic register for a particular slot
|
|
*/
|
|
static inline unsigned char
|
|
pcic_getb (int slot, int reg)
|
|
{
|
|
outb (INDEX(slot), OFFSET (slot) + reg);
|
|
return inb (DATA (slot));
|
|
}
|
|
|
|
/*
|
|
* write a byte to a pcic register for a particular slot
|
|
*/
|
|
static inline void
|
|
pcic_putb (int slot, int reg, unsigned char val)
|
|
{
|
|
outb (INDEX(slot), OFFSET (slot) + reg);
|
|
outb (DATA (slot), val);
|
|
}
|
|
|
|
/*
|
|
* read a word from a pcic register for a particular slot
|
|
*/
|
|
static inline unsigned short
|
|
pcic_getw (int slot, int reg)
|
|
{
|
|
return pcic_getb (slot, reg) | (pcic_getb (slot, reg+1) << 8);
|
|
}
|
|
|
|
/*
|
|
* write a word to a pcic register at a particular slot
|
|
*/
|
|
static inline void
|
|
pcic_putw (int slot, int reg, unsigned short val)
|
|
{
|
|
pcic_putb (slot, reg, val & 0xff);
|
|
pcic_putb (slot, reg + 1, (val >> 8) & 0xff);
|
|
}
|
|
|
|
|
|
void pcic_print_regs (int slot);
|
|
void pcic_map_memory (int slot, int window, unsigned long sys_addr,
|
|
unsigned long card_addr, unsigned long length,
|
|
enum memtype type, int width);
|
|
void pcic_unmap_memory (int slot, int window);
|
|
void pcic_map_io (int slot, int window, unsigned short base,
|
|
unsigned short length, unsigned short width);
|
|
#ifdef TEST
|
|
void pcic_unmap_io (int slot, int window);
|
|
#endif /* TEST */
|
|
void pcic_map_irq (int slot, int irq);
|
|
void pcic_power_on (int slot);
|
|
void pcic_power_off (int slot);
|
|
void pcic_reset (int slot);
|
|
|
|
|
|
#endif /* __PCIC_H__ */
|