freebsd-src/sys/i386/isa/rcreg.h
Andrey A. Chernov f49f5fa852 Allow any speed from 0..76800
Reviewed by:
Submitted by:
Obtained from:
1995-08-02 10:17:35 +00:00

73 lines
3.2 KiB
C

/*
* Copyright (C) 1995 by Pavel Antonov, Moscow, Russia.
* Copyright (C) 1995 by Andrey A. Chernov, Moscow, Russia.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* Cirrus Logic CD180 -based RISCom/8 board definitions
*/
/* Oscillator frequency - 19660.08Mhz / 2 */
#define RC_OSCFREQ 9830400
#define RC_BRD(s) ((s) == 0 ? 0 : \
(((RC_OSCFREQ + (s) / 2) / (s)) + CD180_CTICKS/2) / CD180_CTICKS)
#define RC_VALIDADDR(a) ( (a) == 0x220 || (a) == 0x240 || (a) == 0x250 \
|| (a) == 0x260 || (a) == 0x2A0 || (a) == 0x2B0 \
|| (a) == 0x300 || (a) == 0x320)
#define RC_VALIDIRQ(i) ((i) < 16 && \
"\0\0\0\1\1\1\0\1\0\0\1\1\1\0\0\1"[(i) & 0xF])
/* Riscom/8 board ISA I/O mapping */
#define RC_IOMAP(r) ((((r) & 07) << 1) | (((r) & ~07) << 7))
/* I/O commands */
#define RC_OUT(p,i,d) outb(RC_IOMAP(i) + (p), (d))
#define RC_IN(p,i) inb (RC_IOMAP(i) + (p))
/* Riscom on-board registers (mapping assumed) */
#define RC_RIREG 0x100 /* Ring Indicator Register (read-only) */
#define RC_DTREG 0x100 /* DTR Register (write-only) */
#define RC_BSR 0x101 /* Board Status Register (read-only) */
#define RC_CTOUT 0x101 /* Clear Timeout (write-only) */
/* Board Status Register */
#define RC_BSR_TOUT 0x08 /* Timeout */
#define RC_BSR_RXINT 0x04 /* Receiver Interrupt */
#define RC_BSR_TXINT 0x02 /* Transmitter Interrupt */
#define RC_BSR_MOINT 0x01 /* Modem Control Interrupt */
/* Interrupt groups */
#define RC_MODEMGRP 0x01 /* Modem interrupt group */
#define RC_RXGRP 0x02 /* Receiver interrupt group */
#define RC_TXGRP 0x04 /* Transmitter interrupt group */
/* Priority Interrupt Level definitions */
#define RC_PILR_MODEM (0x80 | RC_MODEMGRP)
#define RC_PILR_RX (0x80 | RC_RXGRP )
#define RC_PILR_TX (0x80 | RC_TXGRP )