freebsd-src/sys/pci
Søren Schmidt 1f7727a963 Upgrade of EIDE DMA support, Johns comments:
* lots of fixes to error handling-- mostly works now
* improve DMA timing config for Triton chipsets-- PIIX4 and UDMA drive
  still untested
* generally improve DMA config in many ways-- mostly cleanup
* clean up boot-time messages
* rewrite PRD generation algorithm
* first wd timeout is now longer, to handle drive spinup

Submitted by: John Hood <cgull@smoke.marlboro.vt.us>
1997-09-04 18:49:53 +00:00
..
aic7870.c Modify my copyright notice to allow the sequencer to be used with GPLed 1997-06-27 19:39:34 +00:00
brktree_reg.h 1.15 4/18/97 John-Mark Gurney <gurney_j@resnet.uoregon.edu> 1997-05-01 00:16:31 +00:00
brooktree848.c Removed unused #includes. 1997-09-02 20:06:59 +00:00
bt9xx.c Removed unused #includes. 1997-08-02 14:33:27 +00:00
cy_pci.c Removed unused #includes. 1997-09-02 20:06:59 +00:00
cy_pcireg.h Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not 1997-02-22 09:48:43 +00:00
dc21040reg.h Import Matt's if_de driver 970703 release. This (apparently) supports 1997-08-03 12:17:39 +00:00
ide_pci.c Upgrade of EIDE DMA support, Johns comments: 1997-09-04 18:49:53 +00:00
ide_pcireg.h Add support for busmaster DMA on some PCI IDE chipsets. 1997-07-29 12:57:25 +00:00
if_de.c Removed unused #includes. 1997-09-02 20:06:59 +00:00
if_devar.h Import Matt's if_de driver 970703 release. This (apparently) supports 1997-08-03 12:17:39 +00:00
if_ed_p.c Add the NetVin 5000 series NE2000 PCI card vendor and device IDs. 1997-08-14 07:53:07 +00:00
if_en_pci.c Added used #include - don't depend on <sys/mbuf.h> including 1997-09-02 01:19:47 +00:00
if_fpa.c Removed unused #includes. 1997-08-02 14:33:27 +00:00
if_fxp.c Removed unused #includes. 1997-08-02 14:33:27 +00:00
if_fxpreg.h Added support for the Intel 82555 PHY chip which is being used on newer 1997-06-13 22:34:52 +00:00
if_lnc_p.c Removed unused #includes. 1997-08-02 14:33:27 +00:00
if_sr_p.c Removed unused #includes. 1997-09-02 20:06:59 +00:00
if_vx_pci.c Yank the casts. 1997-08-21 08:42:59 +00:00
locate.pl Perl script to convert NCR script address into label+offset. 1995-09-08 19:37:11 +00:00
meteor_reg.h Here is a patch that fix a few problems with the RGB version of 1996-06-07 03:03:25 +00:00
meteor.c Removed unused #includes. 1997-09-02 20:06:59 +00:00
ncr.c Prepare for 64bit programming environment (e.g. Alpha): 1997-08-31 19:42:31 +00:00
ncrreg.h Prepare for 64bit programming environment (e.g. Alpha): 1997-08-31 19:42:31 +00:00
pci_compat.c Yank the casts. 1997-08-21 08:42:59 +00:00
pci_ioctl.h Add PCI LKM support. 1997-01-21 23:23:40 +00:00
pci.c Removed unused #includes. 1997-08-02 14:33:27 +00:00
pcireg.h PCI_CLASS_MASS_STORAGE (under PCI_COMPAT) was used in a driver in LINT 1997-06-01 16:00:43 +00:00
pcisupport.c SMP Natoma motherboards cannot know if you are booting a UP or SMP OS. This 1997-08-16 07:18:51 +00:00
pcivar.h Reorder function decls alphabetically. 1997-08-21 08:31:41 +00:00
README.bt848 Fixed omission of reference to ioctl_bt848.h when installing on 2.2. 1997-05-01 00:42:54 +00:00
README.de Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not 1997-02-22 09:48:43 +00:00
README.de-le Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not 1997-02-22 09:48:43 +00:00
scsiiom.c Scsi RESERVATION CONFLICT and BUSY support for Tekram scsi cards. 1997-08-30 05:49:20 +00:00
tek390.c Fix problem in the DC390_DefaultEEprom subroutine, which could lead 1997-08-11 08:49:08 +00:00
tek390.h Rename DIAGNOSTIC to DMA_DIAGNOSTIC. 1996-12-18 11:35:12 +00:00
wdc_p.c Removed unused #includes. 1997-08-02 14:33:27 +00:00

$Id$

----------------

The enclosed drivers should be considered beta-test software.  These
drivers are in no way supported by Digital Equipment.  See the
disclaimers in the sources for more information.  Please be aware that
Digital does not employee me to write drivers for FreeBSD.

This kit contains one driver:

	de	DEC DE435 PCI NIC or compatible

See README.de for information and installation instruction specific to this
driver.

Could you please send me the startup messages in the boot
long along with the type of your PC once the driver configures?  

If you have any problems, comments, suggestions, rant or raves, don't
hesitate to send me mail @ thomas@lkg.dec.com.

Lastly, if you change or modify the code, I want context diffs of your
changes.  I want this to the canonical DEC EtherWORKS driver kit for
FreeBSD, NetBSD, BSD/386, and any other BSD based O/S.  Please make
sure your diffs are approriate conditionalized.

Thanks,
Matt Thomas
--
Mail:	thomas@lkg.dec.com
URL:	http://ftp.digital.com/~thomas/