freebsd-src/usr.sbin/mfiutil/mfi_patrol.c
Scott Long 763fae7918 ntroduce mfiutil, a basic utility for managing LSI SAS-RAID & Dell PERC5/6
controllers.  Controller, array, and drive status can be checked, basic
attributes can be changed, and arrays and spares can be created and deleted.
Controller firmware can also be flashed.

This does not replace MegaCLI, found in ports, as that is officially sanctioned
and supported by LSI and includes vastly more functionality.  However, mfiutil
is open source and guaranteed to provide basic functionality, which can be
especially useful if you have a problem and can't get MegaCLI to work.

Approved by:    re
Obtained from:  Yahoo! Inc.
2009-08-13 23:18:45 +00:00

306 lines
7.0 KiB
C

/*-
* Copyright (c) 2008, 2009 Yahoo!, Inc.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The names of the authors may not be used to endorse or promote
* products derived from this software without specific prior written
* permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#include <sys/types.h>
#include <sys/errno.h>
#include <err.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <time.h>
#include <unistd.h>
#include "mfiutil.h"
static char *
adapter_time(time_t now, uint32_t at_now, uint32_t at)
{
time_t t;
t = (now - at_now) + at;
return (ctime(&t));
}
static void
mfi_get_time(int fd, uint32_t *at)
{
if (mfi_dcmd_command(fd, MFI_DCMD_TIME_SECS_GET, at, sizeof(*at), NULL,
0, NULL) < 0) {
warn("Couldn't fetch adapter time");
at = 0;
}
}
static int
patrol_get_props(int fd, struct mfi_pr_properties *prop)
{
if (mfi_dcmd_command(fd, MFI_DCMD_PR_GET_PROPERTIES, prop,
sizeof(*prop), NULL, 0, NULL) < 0) {
warn("Failed to get patrol read properties");
return (-1);
}
return (0);
}
static int
show_patrol(int ac, char **av)
{
struct mfi_pr_properties prop;
struct mfi_pr_status status;
struct mfi_pd_list *list;
struct mfi_pd_info info;
char label[16];
time_t now;
uint32_t at;
int fd;
u_int i;
fd = mfi_open(mfi_unit);
if (fd < 0) {
warn("mfi_open");
return (errno);
}
time(&now);
mfi_get_time(fd, &at);
if (patrol_get_props(fd, &prop) < 0)
return (errno);
printf("Operation Mode: ");
switch (prop.op_mode) {
case MFI_PR_OPMODE_AUTO:
printf("auto\n");
break;
case MFI_PR_OPMODE_MANUAL:
printf("manual\n");
break;
case MFI_PR_OPMODE_DISABLED:
printf("disabled\n");
break;
default:
printf("??? (%02x)\n", prop.op_mode);
break;
}
if (prop.op_mode == MFI_PR_OPMODE_AUTO) {
if (at != 0 && prop.next_exec)
printf(" Next Run Starts: %s", adapter_time(now, at,
prop.next_exec));
if (prop.exec_freq == 0xffffffff)
printf(" Runs Execute Continuously\n");
else if (prop.exec_freq != 0)
printf(" Runs Start Every %u seconds\n",
prop.exec_freq);
}
if (mfi_dcmd_command(fd, MFI_DCMD_PR_GET_STATUS, &status,
sizeof(status), NULL, 0, NULL) < 0) {
warn("Failed to get patrol read properties");
return (errno);
}
printf("Runs Completed: %u\n", status.num_iteration);
printf("Current State: ");
switch (status.state) {
case MFI_PR_STATE_STOPPED:
printf("stopped\n");
break;
case MFI_PR_STATE_READY:
printf("ready\n");
break;
case MFI_PR_STATE_ACTIVE:
printf("active\n");
break;
case MFI_PR_STATE_ABORTED:
printf("aborted\n");
break;
default:
printf("??? (%02x)\n", status.state);
break;
}
if (status.state == MFI_PR_STATE_ACTIVE) {
if (mfi_pd_get_list(fd, &list, NULL) < 0) {
warn("Failed to get drive list");
return (errno);
}
for (i = 0; i < list->count; i++) {
if (list->addr[i].scsi_dev_type != 0)
continue;
if (mfi_pd_get_info(fd, list->addr[i].device_id, &info,
NULL) < 0) {
warn("Failed to fetch info for drive %u",
list->addr[i].device_id);
return (errno);
}
if (info.prog_info.active & MFI_PD_PROGRESS_PATROL) {
snprintf(label, sizeof(label), " Drive %u",
list->addr[i].device_id);
mfi_display_progress(label,
&info.prog_info.patrol);
}
}
}
close(fd);
return (0);
}
MFI_COMMAND(show, patrol, show_patrol);
static int
start_patrol(int ac, char **av)
{
int fd;
fd = mfi_open(mfi_unit);
if (fd < 0) {
warn("mfi_open");
return (errno);
}
if (mfi_dcmd_command(fd, MFI_DCMD_PR_START, NULL, 0, NULL, 0, NULL) <
0) {
warn("Failed to start patrol read");
return (errno);
}
close(fd);
return (0);
}
MFI_COMMAND(start, patrol, start_patrol);
static int
stop_patrol(int ac, char **av)
{
int fd;
fd = mfi_open(mfi_unit);
if (fd < 0) {
warn("mfi_open");
return (errno);
}
if (mfi_dcmd_command(fd, MFI_DCMD_PR_STOP, NULL, 0, NULL, 0, NULL) <
0) {
warn("Failed to stop patrol read");
return (errno);
}
close(fd);
return (0);
}
MFI_COMMAND(stop, patrol, stop_patrol);
static int
patrol_config(int ac, char **av)
{
struct mfi_pr_properties prop;
long val;
time_t now;
uint32_t at, next_exec, exec_freq;
char *cp;
uint8_t op_mode;
int fd;
exec_freq = 0; /* GCC too stupid */
next_exec = 0;
if (ac < 2) {
warnx("patrol: command required");
return (EINVAL);
}
if (strcasecmp(av[1], "auto") == 0) {
op_mode = MFI_PR_OPMODE_AUTO;
if (ac > 2) {
if (strcasecmp(av[2], "continously") == 0)
exec_freq = 0xffffffff;
else {
val = strtol(av[2], &cp, 0);
if (*cp != '\0') {
warnx("patrol: Invalid interval %s",
av[2]);
return (EINVAL);
}
exec_freq = val;
}
}
if (ac > 3) {
val = strtol(av[3], &cp, 0);
if (*cp != '\0' || val < 0) {
warnx("patrol: Invalid start time %s", av[3]);
return (EINVAL);
}
next_exec = val;
}
} else if (strcasecmp(av[1], "manual") == 0)
op_mode = MFI_PR_OPMODE_MANUAL;
else if (strcasecmp(av[1], "disable") == 0)
op_mode = MFI_PR_OPMODE_DISABLED;
else {
warnx("patrol: Invalid command %s", av[1]);
return (EINVAL);
}
fd = mfi_open(mfi_unit);
if (fd < 0) {
warn("mfi_open");
return (errno);
}
if (patrol_get_props(fd, &prop) < 0)
return (errno);
prop.op_mode = op_mode;
if (op_mode == MFI_PR_OPMODE_AUTO) {
if (ac > 2)
prop.exec_freq = exec_freq;
if (ac > 3) {
time(&now);
mfi_get_time(fd, &at);
if (at == 0)
return (ENXIO);
prop.next_exec = at + next_exec;
printf("Starting next patrol read at %s",
adapter_time(now, at, prop.next_exec));
}
}
if (mfi_dcmd_command(fd, MFI_DCMD_PR_SET_PROPERTIES, &prop,
sizeof(prop), NULL, 0, NULL) < 0) {
warn("Failed to set patrol read properties");
return (errno);
}
close(fd);
return (0);
}
MFI_COMMAND(top, patrol, patrol_config);