mirror of
https://github.com/freebsd/freebsd-src.git
synced 2024-11-29 08:52:46 +00:00
188 lines
8.5 KiB
HTML
188 lines
8.5 KiB
HTML
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN">
|
|
<html>
|
|
<head>
|
|
<meta name="generator" content="HTML Tidy, see www.w3.org">
|
|
<title>Reference Clock Audio Drivers</title>
|
|
</head>
|
|
<body>
|
|
<h3>Reference Clock Audio Drivers</h3>
|
|
|
|
<img align="left" src="pic/radio2.jpg" alt="gif">
|
|
|
|
<p>Make a little noise here.<br clear="left">
|
|
</p>
|
|
|
|
<hr>
|
|
<p>There are some applications in which the computer time can be
|
|
disciplined to an audio signal, rather than a serial timecode and
|
|
communications port or special purpose bus peripheral. This is
|
|
useful in such cases where the audio signal is sent over a
|
|
telephone circuit, for example, or received directly from a
|
|
shortwave receiver. In such cases the audio signal can be connected
|
|
via an ordinary sound card or baseboard audio codec. The suite of
|
|
NTP reference clock drivers currently includes three drivers
|
|
suitable for these applications. They include a driver for the
|
|
Inter Range Instrumentation Group (IRIG) signals produced by most
|
|
radio clocks and timing devices, another for the Canadian
|
|
time/frequency radio station CHU and a third for the NIST
|
|
time/frequency radio stations WWV and WWVH. The radio drivers are
|
|
designed to work with ordinary inexpensive shortwave radios and may
|
|
be one of the least expensive ways to build a good primary time
|
|
server.</p>
|
|
|
|
<p>All three drivers make ample use of sophisticated digital signal
|
|
processing algorithms designed to efficiently extract timing
|
|
signals from noise and interference. The radio station drivers in
|
|
particular implement optimum linear demodulation and decoding
|
|
techniques, including maximum likelihood and soft-decision methods.
|
|
The documentation page for each driver contains an in-depth
|
|
discussion on the algorithms and performance expectations. In some
|
|
cases the algorithms are further analyzed, modelled and evaluated
|
|
in a technical report.</p>
|
|
|
|
<p>Currently, the audio drivers are compatible with Sun operating
|
|
systems, including Solaris and SunOS, and the native audio codec
|
|
interface supported by these systems. In fact, the interface is
|
|
quite generic and support for other systems, in particular the
|
|
various Unix generics, should not be difficult. Volunteers are
|
|
solicited.</p>
|
|
|
|
<p>The audio drivers include a number of common features designed
|
|
to groom input signals, suppress spikes and normalize signal
|
|
levels. An automatic gain control (AGC) feature provides protection
|
|
against overdriven or underdriven input signals. It is designed to
|
|
maintain adequate demodulator signal amplitude while avoiding
|
|
occasional noise spikes. In order to assure reliable operation, the
|
|
signal level must be in the range where the audio gain control is
|
|
effective. In general, this means the input signal level must be
|
|
such as to cause the AGC to set the gain somewhere in the middle of
|
|
the range from 0 to 255, as indicated in the timecode displayed by
|
|
the <tt>ntpq</tt> program.</p>
|
|
|
|
<p>The drivers operate by disciplining a logical clock based on the
|
|
codec sample clock to the audio signal as received. This is done by
|
|
stuffing or slipping samples as required to maintain exact
|
|
frequency to the order of 0.1 PPM. In order for the driver to
|
|
reliably lock on the audio signal, the sample clock frequency
|
|
tolerance must be less than 250 PPM (.025 percent) for the IRIG
|
|
driver and half that for the radio drivers. The largest error
|
|
observed so far is about 60 PPM, but it is possible some sound
|
|
cards or codecs may exceed that value.</p>
|
|
|
|
<p>The drivers include provisions to select the input port and to
|
|
monitor the input signal. The <tt>fudge flag 2</tt> selects the
|
|
microphone port if set to zero or the line-in port if set to one.
|
|
It does not seem useful to specify the compact disc player port.
|
|
The <tt>fudge flag 3</tt> enables the input signal monitor using
|
|
the previously selected output port and output gain. Both of these
|
|
flags can be set in the configuration file or remotely using the
|
|
<tt>ntpdc</tt> utility program.</p>
|
|
|
|
<h4>Shortwave Radio Drivers</h4>
|
|
|
|
<p>The WWV/H and CHU audio drivers require an external shortwave
|
|
radio with the radio output - speaker or headphone jack - connected
|
|
to either the microphone or line-in port on the computer. There is
|
|
some degree of art in setting up the radio and antenna and getting
|
|
the setup to work. While the drivers are highly sophisticated and
|
|
efficient in extracting timing signals from noise and interference,
|
|
it always helps to have as clear a signal as possible.</p>
|
|
|
|
<p>The most important factor affecting the radio signal is the
|
|
antenna. It need not be long - even 15 feet is enough if it is
|
|
located outside of a metal frame building, preferably on the roof,
|
|
and away from metallic objects. An ordinary CB whip mounted on a
|
|
PVC pipe and wooden X-frame on the roof should work well with most
|
|
portable radios, as they are optimized for small antennas.</p>
|
|
|
|
<p>The radio need not be located near the computer; in fact, it
|
|
generally works better if the radio is outside the near field of
|
|
computers and other electromagnetic noisemakers. It can be in the
|
|
elevator penthouse connected by house wiring, which can also be
|
|
used to power the radio. A couple of center-tapped audio
|
|
transformers will minimize noise pickup and provide phantom power
|
|
to the radio with return via the AC neutral wire.</p>
|
|
|
|
<p>The WWV/H and CHU transmitters operate on several frequencies
|
|
simultaneously, so that in most parts of North America at least one
|
|
frequency supports propagation to the receiver location at any
|
|
given hour. While both drivers support the ICOM CI-V radio
|
|
interface and can tune the radio automatically, computer-tunable
|
|
radios are expensive and probably not cost effective compared to a
|
|
GPS receiver. So, the radio frequency must usually be fixed and
|
|
chosen by compromise.</p>
|
|
|
|
<p>Shortwave (3-30 MHz) radio propagation phenomena are well known
|
|
to shortwave enthusiasts. The phenomena generally obey the
|
|
following rules:</p>
|
|
|
|
<ul>
|
|
<li>The optimum frequency is higher in daytime than nighttime,
|
|
stays high longer on summer days and low longer on winter
|
|
nights.</li>
|
|
|
|
<li>Transitions between daytime and nightime conditions generally
|
|
occur somewhat after sunrise and sunset at the midpoint of the path
|
|
from transmitter to receiver.</li>
|
|
|
|
<li>Ambient noise (static) on the lower frequencies follows the
|
|
thunderstorm season, so is higher on summer afternoons and
|
|
evenings.</li>
|
|
|
|
<li>The lower frequency bands are best for shorter distances, while
|
|
the higher bands are best for longer distances.</li>
|
|
|
|
<li>The optimum frequencies are higher at the peak of the 11-year
|
|
sunspot cycle and lower at the trough. The current sunspot cycle
|
|
should peak in the first couple of years beginning the
|
|
century.</li>
|
|
</ul>
|
|
|
|
The best way to choose a frequency is to listen at various times
|
|
over the day and determine the best highest (daytime) and lowest
|
|
(nighttime) frequencies. Then, assuming one is available, choose
|
|
the highest frequency between these frequencies. This strategy
|
|
assumes that the high frequency is more problematic than the low,
|
|
that the low frequency probably comes with severe multipath and
|
|
static, and insures that probably twice a day the chosen frequency
|
|
will work. For instance, on the east coast the best compromise CHU
|
|
frequency is probably 7335 kHz and the best WWV frequency is
|
|
probably 15 MHz.
|
|
|
|
<h4>Debugging Aids</h4>
|
|
|
|
<p>The audio drivers include extensive debugging support to help
|
|
hook up the audio signals and monitor the driver operations. The
|
|
documentation page for each driver describes the various messages
|
|
that can be produced either in real-time or written to the <tt>
|
|
clockstats</tt> file for later analysis. Of particular help in
|
|
verifying signal connections and compatibility is a provision to
|
|
monitor the signal via headphones or speaker.</p>
|
|
|
|
<p>The drivers write a synthesized timecode to the <tt>
|
|
clockstats</tt> file each time the clock is set or verified and at
|
|
other times if verbose monitoring is enabled. The format includes
|
|
several fixed-length fields defining the Gregorian time to the
|
|
millisecond, together with additional variable-length fields
|
|
specific to each driver. The data include the intervals since the
|
|
clock was last set or verified, the audio gain and various state
|
|
variables and counters specific to each driver.</p>
|
|
|
|
<h4>Additional Information</h4>
|
|
|
|
<a href="refclock.htm">Reference Clock Drivers</a> <br>
|
|
<a href="driver7.htm">Radio CHU Audio Demodulator/Decoder</a> <br>
|
|
<a href="driver36.htm">Radio WWV/H Audio Demodulator/Decoder</a>
|
|
<br>
|
|
<a href="driver6.htm">IRIG Audio Decoder</a>
|
|
|
|
<hr>
|
|
<a href="index.htm"><img align="left" src="pic/home.gif" alt=
|
|
"gif"></a>
|
|
|
|
<address><a href="mailto:mills@udel.edu">David L. Mills
|
|
<mills@udel.edu></a></address>
|
|
</body>
|
|
</html>
|
|
|