freebsd-src/sys/pci
KATO Takenori 275d4ec481 Recognize PC-98 16-bits bus (C-bus) as ISA bus. Because class number
of the C-bus is not assigned, PCI to C-bus bridges were recognized as
generic PCI bridges.
1999-04-20 11:36:36 +00:00
..
adv_pci.c
adw_pci.c
ahc_pci.c Add support for the 3950U2B controller. 1999-03-23 07:26:41 +00:00
alpm.c Add alpm.c, Aladdin Power Management SMBus support for the SMBus framework. 1999-02-13 17:51:46 +00:00
brktree_reg.h Added detection for bt848a chips 1999-02-08 11:55:30 +00:00
brooktree848.c My changes: 1999-02-25 07:45:47 +00:00
bt848_i2c.c
bt848_i2c.h
bt_pci.c Implement an EISA new-bus framework. The old driver probe mechanism 1999-04-18 15:50:35 +00:00
cy_pci.c Added missing newline to "no ports found!" message. 1999-04-15 00:13:20 +00:00
cy_pcireg.h
dc21040reg.h
dpt_pci.c
dpt_pci.h
es1370_reg.h
es1370.c
ide_pci.c Bring the 'new-bus' to the i386. This extensively changes the way the 1999-04-16 21:22:55 +00:00
ide_pcireg.h
if_ax.c Make ASIX driver work on FreeBSD/alpha, add to GENERIC. 1999-04-08 17:42:48 +00:00
if_axreg.h Make ASIX driver work on FreeBSD/alpha, add to GENERIC. 1999-04-08 17:42:48 +00:00
if_de.c MF22... add bridging support to the device drivers. Without this 1999-03-17 16:44:53 +00:00
if_devar.h
if_ed_p.c
if_en_pci.c
if_fpa.c
if_fxp.c Bring the 'new-bus' to the i386. This extensively changes the way the 1999-04-16 21:22:55 +00:00
if_fxpreg.h Define more registers and fix incorrect (but unused) register bit definitions. 1999-02-11 23:41:21 +00:00
if_fxpvar.h Bring the 'new-bus' to the i386. This extensively changes the way the 1999-04-16 21:22:55 +00:00
if_lnc_p.c
if_mx.c Add bridging support (tested in 3.1-RELEASE by Steven Vetzal 1999-04-16 01:56:06 +00:00
if_mxreg.h Add PCI IDs for the Compex RL100-TX, which uses the Macronix 98713 chip. 1999-04-08 17:38:05 +00:00
if_pn.c Bring the 'new-bus' to the i386. This extensively changes the way the 1999-04-16 21:22:55 +00:00
if_pnreg.h Grrr. Make all modes work properly with the 82c168 chip and built-in 1999-04-14 19:40:08 +00:00
if_rl.c Merge in some updates for the RealTek driver, mainly: 1999-04-12 21:37:00 +00:00
if_rlreg.h Merge in some updates for the RealTek driver, mainly: 1999-04-12 21:37:00 +00:00
if_sr_p.c
if_ti.c Remove teensy-weensy bit of debug code that crept in. 1999-04-06 22:56:21 +00:00
if_tireg.h Add driver support for gigabit ethernet adapters based on the Alteon 1999-04-06 17:08:31 +00:00
if_tl.c Insert ifmedia_set() that I forgot and put in the vtophys() hack for 1999-03-31 04:04:14 +00:00
if_tlreg.h Insert ifmedia_set() that I forgot and put in the vtophys() hack for 1999-03-31 04:04:14 +00:00
if_tx.c Well folks, this is it - The second stage of the removal for build support 1999-04-17 08:36:07 +00:00
if_txvar.h Implemented workaround for EPIC's Application Note 7-15 (concerning 1999-03-14 08:30:23 +00:00
if_vr.c Add support for still more cheapo 10/100 cards: Delta Electronics and 1999-02-23 15:38:25 +00:00
if_vrreg.h Add support for still more cheapo 10/100 cards: Delta Electronics and 1999-02-23 15:38:25 +00:00
if_vx_pci.c
if_wb.c Remember to initialize ifp->if_snd.ifq_maxlen. 1999-02-01 21:25:52 +00:00
if_wbreg.h
if_xl.c Bring the 'new-bus' to the i386. This extensively changes the way the 1999-04-16 21:22:55 +00:00
if_xlreg.h - Close PR #11136: add PCI ID for another new cyclone device: the 1999-04-15 03:18:33 +00:00
intpm.c
intpmreg.h
isp_pci.c Staticize. 1999-04-11 02:50:42 +00:00
locate.pl
meteor_reg.h
meteor.c
ncr.c
ncrreg.h
ohci_pci.c Bring the 'new-bus' to the i386. This extensively changes the way the 1999-04-16 21:22:55 +00:00
pci_compat.c Well folks, this is it - The second stage of the removal for build support 1999-04-17 08:36:07 +00:00
pci_if.m Bring the 'new-bus' to the i386. This extensively changes the way the 1999-04-16 21:22:55 +00:00
pci_ioctl.h
pci.c Bring the 'new-bus' to the i386. This extensively changes the way the 1999-04-16 21:22:55 +00:00
pcic_p.c Import PCI pccard bridge chip probing from PAO. Hopeful prelude for 1999-04-01 15:28:10 +00:00
pcic_p.h Import PCI pccard bridge chip probing from PAO. Hopeful prelude for 1999-04-01 15:28:10 +00:00
pcireg.h Bring the 'new-bus' to the i386. This extensively changes the way the 1999-04-16 21:22:55 +00:00
pcisupport.c Recognize PC-98 16-bits bus (C-bus) as ISA bus. Because class number 1999-04-20 11:36:36 +00:00
pcivar.h Well folks, this is it - The second stage of the removal for build support 1999-04-17 08:36:07 +00:00
README.bt848
scsiiom.c
simos.c
simos.h
ti_fw2.h Add driver support for gigabit ethernet adapters based on the Alteon 1999-04-06 17:08:31 +00:00
ti_fw.h Add driver support for gigabit ethernet adapters based on the Alteon 1999-04-06 17:08:31 +00:00
uhci_pci.c Bring the 'new-bus' to the i386. This extensively changes the way the 1999-04-16 21:22:55 +00:00
xrpu.c Fix Typo. 1999-03-12 11:09:18 +00:00

-------------------------------------------------------------------------------
Recent versions of 3.0-current have the bktr driver built in.  Older versions
of 3.0 and all versions of 2.2 need to have the driver files installed by hand:

cp ioctl_bt848.h /sys/i386/include/
cp brktree_reg.h brooktree848.c /sys/pci/

In /sys/conf/files add:
pci/brooktree848.c        optional bktr device-driver

-------------------------------------------------------------------------------
In all cases you will need to add the driver to your kernel:

In your kernel configuration file:
controller      pci0     #if you already have this line don't add it.
device          bktr0    

There is no need to specify DMA channels nor interrupts for this
driver.

-------------------------------------------------------------------------------
Finally you need to create nodes for the driver:

Create a video device:
mknod /dev/bktr0 c 92 0

Create a tuner device:
mknod /dev/tuner0 c 92 16

-------------------------------------------------------------------------------
The code attempts to auto-probe code to detect card/tuner types.
The detected card is printed in the dmesg as the driver is loaded.  If
this fails to detect the proper card you can override it in brooktree848.c:

#define OVERRIDE_CARD	<card type>

where <card type> is one of:
	CARD_UNKNOWN
	CARD_MIRO
	CARD_HAUPPAUGE
	CARD_STB
	CARD_INTEL

-------------------------------------------------------------------------------
This model now separates the "tuner control" items into a minor device:

minor device layout:  xxxxxxxx xxxT UUUU

 UUUU:   the card (ie UNIT) identifier, 0 thru 15
 T == 0: video device
 T == 1: tuner device

Access your tuner ioctl thru your tuner device handle and anything
which controls the video capture process thru the video device handle.

Certain ioctl()s such as video source are available thru both devices.

-------------------------------------------------------------------------------
If your tuner does not work properly or is not recognized properly
try setting the tuner type via or card type:
sysctl -w hw.bt848.card=<integer> current valid values are 0 to 5 inclusive
sysctl -w hw.bt848.tuner=<integer> where integer is a value from 1 to 10
systcl -w hw.bt848.reverse_mute=<1 | 0> to reverse the mute function in the
                                driver set variable to 1.
The exact format of the sysctl bt848 variable is:
unit << 8 | value

unit identifies the pci bt848 board to be affected 0 is the first bt848 
board, 1 is the second bt848 board.
value denotes the integer value for tuners is a value from 0 to 10 for
reversing the mute function of the tuner the value is 1 or 0.

to find out all the bt848 variables:
sysctl hw.bt848



-------------------------------------------------------------------------------
The bt848 driver consists of:

src/sys/i386/include/ioctl_bt848.h
src/sys/pci/brktree_reg.h
src/sys/pci/brooktree848.c