freebsd-src/etc/sysconfig
Alexander Langer 6a9352fece Typo police.
1997-01-04 23:29:56 +00:00

323 lines
9.9 KiB
Bash
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

#!/bin/sh
#
# This is sysconfig - a file full of useful variables that you can set
# to change the default startup behavior of your system.
#
# $Id: sysconfig,v 1.54 1996/12/10 02:23:27 adam Exp $
######################### Start Of Local Configuration Section ###########
# Location of local startup directories.
local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d"
######################### End Of Local Configuration Section #############
######################### Start Of Syscons Section #######################
# Choose keyboard map from /usr/share/syscons/keymaps/* or NO if default.
keymap=NO
# Set keyboard rate to: slow, normal, fast or NO if default.
keyrate=NO
# Change function keys default values (or no change if NO)
# Syntax: "<funkey_number> <new_value> [<funkey_number> <new_value>]..."
keychange=NO
# Desired cursor type {normal|blink|destructive}, NO if no change
cursor=NO
# Choose screen map from /usr/share/syscons/scrnmaps/* (or NO for none)
scrnmap=NO
# Choose font 8x16 from /usr/share/syscons/fonts/* (or NO for default)
font8x16=NO
# Choose font 8x14 from /usr/share/syscons/fonts/* (or NO for default)
font8x14=NO
# Choose font 8x8 from /usr/share/syscons/fonts/* (or NO for default)
font8x8=NO
# Set blank time (in seconds) or "off" to turn it off (or NO for default)
blanktime=NO
# Set to screen saver desired: blank, green, snake, star (or NO for none)
saver=NO
# Set to
# {microsoft|mousesystems|mmseries|logitech|busmouse|mouseman|ps/2|mmhittab}
# to activate system mouse cursor support (or NO for none)
# Use 'vidcontrol -m on' command to activate it on particular screen
mousedtype=NO
############## Next block activated only if mousedtype != NO ################
# Set to your mouse port (required)
# Use real device here, because /dev/mouse usually linked with /dev/sysmouse
mousedport=/dev/cuaa0
# Moused options:
# -s: 9600 baud mouse
# -c: enable ChordMiddle
# see moused usage info for complete options list
mousedflags=""
######################### End of moused block ##############################
# General Russian setup for example:
# (koi8-r keyboard with cp866 screen font mapped to koi8-r)
#
# keymap=ru.koi8-r
# keyrate=fast
# keychange="61 "
# cursor=destructive
# scrnmap=koi8-r2cp866
# font8x16=cp866b-8x16
# font8x14=cp866-8x14
# font8x8=cp866-8x8
# blanktime=600
# saver=snake
# mousedtype=mousesystems
# mousedport=/dev/cuaa0
# mousedflags=""
######################### End Of Syscons Section #######################
######################### Start Of Netconfig Section #######################
# Set to the name of your host - this is pretty important!
hostname=myname.my.domain
# Set to the NIS domainname of your host, or NO if none
defaultdomainname=NO
#
# Some broken implementations can't handle the RFC 1323 and RFC 1644
# TCP options. If TCP connections randomly hang, try disabling this,
# and bug the vendor of the losing equipment.
#
tcp_extensions=YES
# If you're running PCNFSD or anything else which requires mountd to allow
# non-root requests for NFS mounts, set this to YES.
weak_mountd_authentication=NO
#
# Set to the list of network devices on this host. You must have an
# ifconfig_${network_interface} line for each interface listed here.
# Extra addresses may be specified with sequentual _alias<N> lines. IPX
# addresses may be specified with an ifconfig_${network_interface}_ipx
# line.
#
# for example:
#
# network_interfaces="ed0 sl0 lo0"
#
# ifconfig_ed0="inet 10.0.0.1 netmask 0xffffff00"
# ifconfig_sl0="inet 10.0.1.0 netmask 0xffffff00"
# ifconfig_lo0="inet 127.0.0.1"
# ifconfig_ed0_alias0="inet 10.0.2.1 netmask 0xffffff00"
# ifconfig_ed0_alias1="inet 10.0.2.2 netmask 0xffffffff"
# ifconfig_ed0_ipx="ipx 0x1234"
#
# Alternatively, /etc/start_if.${network_interface} is run if it exists.
# This script can be used as an alternative to the ifconfig_<xxx> lines.
#
network_interfaces="lo0"
ifconfig_lo0="inet 127.0.0.1"
#
# Set to the list of route add lines for this host. You must have a
# route_${static_routes} line for each static route listed here (unless
# static_routes is set to "" - do NOT use ``NO'' to denote a lack of static
# routes!).
#
#static_routes="foo multicast"
#route_foo="woofo woofo-gw"
#route_multicast="224.0.0.0 -netmask 0xf0000000 -interface 10.0.0.1"
static_routes=""
# Set to the host you'd like set as your default router, or NO for none.
# This is the same as adding a ``default'' entry to static_routes.
defaultrouter=NO
# This is the routing daemon you want to use. Possible options are
# currently NO (for none), `routed' and `gated'. Also see `routerflags'
# for startup flags.
router=routed
# These are the flags you'd like to start the routing daemon with
routerflags=-q
# mrouted flags, or NO if you don't want to start mrouted. Needs kernel
# options enabled before it will work.
mrouted=NO
# YES will switch routing on in the kernel. You need to switch this on
# if this machine has to act as a IPX router. You need to build a
# kernel with IPX support for this to work.
ipxgateway=NO
# IPXrouted flags. NO if you don't want to start it. Do "man IPXrouted"
# to get more information on the flags.
ipxrouted=NO
# timed flags, or NO if you don't want to start the time daemon
timedflags=NO
# xntpd flags, or NO if you don't want to start the xntpd daemon
xntpdflags="NO"
# this is inoperative unless xntpd is enabled; NO to disable
tickadjflags="-Aq"
# Set to the site you'd like to synchronize your clock from (gatekeeper.dec.com,
# for example) or NO for no such site.
ntpdate="NO"
# Set to YES if you want to run rwhod
rwhod=NO
# Set to NO if don't want to run lpd
lpd=YES
# Default sendmail flags. -bd is pretty mandatory, -q<n>m sets the queue scan
# time in minutes. If set to NO, don't start sendmail at all.
sendmail_flags="-bd -q30m"
# Set to appropriate flags if you want to use AMD. The commented-out entry
# provides a reasonable default, using the sample amd.map config file from the
# /usr/src/etc directory.
amdflags="NO"
#amdflags="-a /net -c 1800 -k i386 -d my.domain -l syslog /host /etc/amd.map"
# Set to YES if this machine will be an NFS client
nfs_client=NO
# Set to YES if this machine will be an NFS server
nfs_server=NO
# Set to appropriate flags if you want to start NIS for a client
nis_clientflags="NO"
# Name of host to ypset to, if no YP server on this wire
nis_ypsetflags="NO"
# Set to appropriate flags if you want to start NIS for a server
nis_serverflags="NO"
# Set to appropriate flags for rpc.ypxfrd. This should only be
# run on NIS master servers.
ypxfrdflags="NO"
# Set to appropriate flags for rpc.yppasswdd. This should only be
# run on NIS master servers.
# Typical flags might be "-t /var/yp/master.passwd -s -f"
yppasswddflags="NO"
# Set to appropriate flags for named, if you have a full-time
# connection to the Internet.
# For most hosts, flags should be "-b /etc/namedb/named.boot"
namedflags="NO"
# Set to YES if you want to run the X-10 power controller daemon
xtend=NO
# Set to the name of the device for kernel crashdumps, or `off' to
# disable any statically configured dumpdev, or NO for no change.
# The device should normally be one of the swap devices specified
# in /etc/fstab.
dumpdev=NO
# Set to YES if you want kernel crashdumps to be saved for debugging
savecore=NO
# Set to an additional swapfile you'd like to have added to preallocated swap
# space during system boot (or NO for none).
swapfile=NO
# Set to YES if you want to run Kerberos authentication
kerberos_server=NO
# If you want this host to be a gateway, set to YES.
gateway=NO
# If you want this host to be a firewall or otherwise filter IP, set to YES.
firewall=NO
# Set to YES if you wish to check quotas.
check_quotas=NO
# Set to YES to turn on accounting.
accounting=NO
######################### End Of Netconfig Section #######################
######################### Start Of PC-card Section #######################
# If you want to enable APM BIOS driver, set to YES
# (The APM BIOS driver is not configured into GENERIC kernel b/c of bugs)
apm_enable=NO
# If you want to use PC-card package, set to YES
# (PC-card support is not configured in the GENERIC kernel)
pccard_enable=NO
# If you want to specify the address of memory used by PCIC,
# set this address (DEFAULT=0xd0000)
pccard_mem=DEFAULT
# If you want to use Etnerent PCMCIA cards, specify the ifconfig portion
# here. (card-specific flags like connector selection should be written in
# the card-specific entry in /etc/pccard.conf). Set to DHCP if you want to
# use a DHCP server to determine your IP address (not implemented).
#
# Set to NO if you don't want to configure your PC-CARD ethernet controller.
#
# for example:
#
# pccard_ifconfig="131.113.32.126 netmask 0xffffff00"
# or
# pccard_ifconfig="DHCP"
#
pccard_ifconfig=NO
######################### End Of PC-card Section #######################
######################### Start Of Misc Section #######################
# Set to YES if you want ibcs2 (SCO) emulation loaded at startup
ibcs2=NO
# Set to YES if you want Linux a.out emulation loaded at startup
linux=NO
# Set to a string representing the interrupts you are going to use
# for generating entropy in the kernel (or NO to ignore).
# If the machine is networked, the Ethernet card IRQ is good.
# The IRQ on an intelligent hard disk controller is good.
# The IRQ's on most sound devices are good.
#
# The following choices are BAD:
# The IRQ's on COM-ports (SIO devices), the IRQ used by a "classic"
# IDE disk or cdrom (Intelligent controllers seem to be OK), and
# the IRQ on the system clock.
#
# Experiment with the rest. The best interrupts are the ones that
# happen fairly irregularly, and never occur in very high-speed bursts.
#
# You'll have it right when you have a good supply of numbers from
# /dev/random, and no problems on your system, like slowdowns,
# Sluggish net/disk activity, perhaps even errors.
# For example - if you have a sound blaster on IRQ5, an ethernet card
# on IRQ10 and a SCSI controller on IRQ11 (eg ADAPTEC 1542) you might
# try this:
#
# rand_irqs="-s 5 -s 10 -s 11"
rand_irqs="NO"