freebsd-src/sys/dev/vxge/vxgehal/vxgehal-fifo.h
George V. Neville-Neil 548d35fd69 Exar driver for X3100 10GbE Server/Storage adapters
Features: Jumbo frames (up to 9600), LRO (Large Receive Offload),
          TSO (TCP segmentation offload), RTH (Receive Traffic Hash).

Submitted by: Sriram Rapuru at Exar
MFC after:	2 weeks
2011-04-28 14:33:15 +00:00

224 lines
8.0 KiB
C

/*-
* Copyright(c) 2002-2011 Exar Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification are permitted provided the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* 3. Neither the name of the Exar Corporation nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*$FreeBSD$*/
#ifndef VXGE_HAL_FIFO_H
#define VXGE_HAL_FIFO_H
__EXTERN_BEGIN_DECLS
/*
* struct __hal_fifo_t - Fifo.
* @channel: Channel "base" of this fifo, the common part of all HAL
* channels.
* @mempool: Memory pool, from which descriptors get allocated.
* @config: Fifo configuration, part of device configuration
* (see vxge_hal_device_config_t {}).
* @interrupt_type: Interrupt type to be used
* @no_snoop_bits: See vxge_hal_fifo_config_t {}.
* @memblock_size: Fifo descriptors are allocated in blocks of @mem_block_size
* bytes. Setting @memblock_size to page size ensures
* by-page allocation of descriptors. 128K bytes is the
* maximum supported block size.
* @txdl_per_memblock: Number of TxDLs (TxD lists) per memblock.
* on TxDL please refer to X3100 UG.
* @txdl_size: Configured TxDL size (i.e., number of TxDs in a list), plus
* per-TxDL HAL private space (__hal_fifo_txdl_priv_t).
* @txdl_priv_size: Per-TxDL space reserved for HAL and ULD
* @per_txdl_space: Per txdl private space for the ULD
* @txdlblock_priv_size: Total private space per TXDL memory block
* @align_size: Cache alignment size
* @callback: Fifo completion callback. HAL invokes the callback when there
* are new completions on that fifo. In many implementations
* the @callback executes in the hw interrupt context.
* @txdl_init: Fifo's descriptor-initialize callback.
* See vxge_hal_fifo_txdl_init_f {}.
* If not NULL, HAL invokes the callback when opening
* the fifo via vxge_hal_vpath_open().
* @txdl_term: Fifo's descriptor-terminate callback. If not NULL,
* HAL invokes the callback when closing the corresponding fifo.
* See also vxge_hal_fifo_txdl_term_f {}.
* @stats: Statistics of this fifo
*
* Fifo channel.
* Note: The structure is cache line aligned.
*/
typedef struct __hal_fifo_t {
__hal_channel_t channel;
vxge_hal_mempool_t *mempool;
vxge_hal_fifo_config_t *config;
u64 interrupt_type;
u32 no_snoop_bits;
u32 memblock_size;
u32 txdl_per_memblock;
u32 txdl_size;
u32 txdl_priv_size;
u32 per_txdl_space;
u32 txdlblock_priv_size;
u32 align_size;
vxge_hal_fifo_callback_f callback;
vxge_hal_fifo_txdl_init_f txdl_init;
vxge_hal_fifo_txdl_term_f txdl_term;
vxge_hal_vpath_stats_sw_fifo_info_t *stats;
} __vxge_os_attr_cacheline_aligned __hal_fifo_t;
/*
* struct __hal_fifo_txdl_priv_t - Transmit descriptor HAL-private data.
* @dma_addr: DMA (mapped) address of _this_ descriptor.
* @dma_handle: DMA handle used to map the descriptor onto device.
* @dma_offset: Descriptor's offset in the memory block. HAL allocates
* descriptors in memory blocks (see vxge_hal_fifo_config_t {})
* Each memblock is a contiguous block of DMA-able memory.
* @frags: Total number of fragments (that is, contiguous data buffers)
* carried by this TxDL.
* @align_vaddr_start: Aligned virtual address start
* @align_vaddr: Virtual address of the per-TxDL area in memory used for
* alignement. Used to place one or more mis-aligned fragments
* (the maximum defined by configration variable
* @max_aligned_frags).
* @align_dma_addr: DMA address translated from the @align_vaddr.
* @align_dma_handle: DMA handle that corresponds to @align_dma_addr.
* @align_dma_acch: DMA access handle corresponds to @align_dma_addr.
* @align_dma_offset: The current offset into the @align_vaddr area.
* Grows while filling the descriptor, gets reset.
* @align_used_frags: Number of fragments used.
* @alloc_frags: Total number of fragments allocated.
* @dang_frags: Number of fragments kept from release until this TxDL is freed.
* @bytes_sent:
* @unused:
* @dang_txdl:
* @next_txdl_priv:
* @first_txdp:
* @dang_txdlh: Pointer to TxDL (list) kept from release until this TxDL
* is freed.
* @linked_txdl_priv: Pointer to any linked TxDL for creating contiguous
* TxDL list.
* @txdlh: Corresponding txdlh to this TxDL.
* @memblock: Pointer to the TxDL memory block or memory page.
* on the next send operation.
* @dma_object: DMA address and handle of the memory block that contains
* the descriptor. This member is used only in the "checked"
* version of the HAL (to enforce certain assertions);
* otherwise it gets compiled out.
* @allocated: True if the descriptor is reserved, 0 otherwise. Internal usage.
*
* Per-transmit decsriptor HAL-private data. HAL uses the space to keep DMA
* information associated with the descriptor. Note that ULD can ask HAL
* to allocate additional per-descriptor space for its own (ULD-specific)
* purposes.
*
* See also: vxge_hal_ring_rxd_priv_t {}.
*/
typedef struct __hal_fifo_txdl_priv_t {
dma_addr_t dma_addr;
pci_dma_h dma_handle;
ptrdiff_t dma_offset;
u32 frags;
u8 *align_vaddr_start;
u8 *align_vaddr;
dma_addr_t align_dma_addr;
pci_dma_h align_dma_handle;
pci_dma_acc_h align_dma_acch;
ptrdiff_t align_dma_offset;
u32 align_used_frags;
u32 alloc_frags;
u32 dang_frags;
u32 bytes_sent;
u32 unused;
vxge_hal_fifo_txd_t *dang_txdl;
struct __hal_fifo_txdl_priv_t *next_txdl_priv;
vxge_hal_fifo_txd_t *first_txdp;
void *memblock;
#if defined(VXGE_DEBUG_ASSERT)
vxge_hal_mempool_dma_t *dma_object;
#endif
#if defined(VXGE_OS_MEMORY_CHECK)
u32 allocated;
#endif
} __hal_fifo_txdl_priv_t;
#define VXGE_HAL_FIFO_ULD_PRIV(fifo, txdh) \
fifo->channel.dtr_arr[ \
((vxge_hal_fifo_txd_t *)(txdh))->host_control].uld_priv
#define VXGE_HAL_FIFO_HAL_PRIV(fifo, txdh) \
((__hal_fifo_txdl_priv_t *)(fifo->channel.dtr_arr[ \
((vxge_hal_fifo_txd_t *)(txdh))->host_control].hal_priv))
#define VXGE_HAL_FIFO_MAX_FRAG_CNT(fifo) fifo->config->max_frags
#define VXGE_HAL_FIFO_TXDL_INDEX(txdp) \
(u32)((vxge_hal_fifo_txd_t *)txdp)->host_control
/* ========================= FIFO PRIVATE API ============================= */
vxge_hal_status_e
__hal_fifo_create(
vxge_hal_vpath_h vpath_handle,
vxge_hal_fifo_attr_t *attr);
void
__hal_fifo_abort(
vxge_hal_fifo_h fifoh,
vxge_hal_reopen_e reopen);
vxge_hal_status_e
__hal_fifo_reset(
vxge_hal_fifo_h ringh);
void
__hal_fifo_delete(
vxge_hal_vpath_h vpath_handle);
void
__hal_fifo_txdl_free_many(
__hal_fifo_t *fifo,
vxge_hal_fifo_txd_t *txdp,
u32 list_size,
u32 frags);
#if defined(VXGE_HAL_ALIGN_XMIT)
void
__hal_fifo_txdl_align_free_unmap(
__hal_fifo_t *fifo,
vxge_hal_fifo_txd_t *txdp);
vxge_hal_status_e
__hal_fifo_txdl_align_alloc_map(
__hal_fifo_t *fifo,
vxge_hal_fifo_txd_t *txdp);
#endif
__EXTERN_END_DECLS
#endif /* VXGE_HAL_FIFO_H */