freebsd-src/sys/pci
Peter Wemm cebf86fa3f Put a FYI in the compatability shims so that people are aware that they
are using an old unconverted driver.  Most (if not all) of the drivers
for common hardware are newbus these days.  However, we don't want
to encourage people to take the easy way out and write new drivers
using the shims.  This is just passive "encouragement".

Reviewed by:	phk
2000-01-29 15:37:36 +00:00
..
adw_pci.c
alpm.c Remove the 'ivars' arguement to device_add_child() and 1999-12-03 08:41:24 +00:00
amd.c The error status for a scsi status error is "CAM_SCSI_STATUS_ERROR", not 0. 2000-01-14 03:39:30 +00:00
amd.h
cy_pci.c
cy_pcireg.h
dc21040reg.h
ida_pci.c
ide_pci.c Remove some horrible #if 0'd code that has no hope of working now. It 1999-12-12 14:47:23 +00:00
ide_pcireg.h
if_ar_p.c
if_dc.c Add support for DM9102A boards with Davicom DM9801 HomePNA PHYs. 2000-01-24 17:19:37 +00:00
if_dcreg.h Add support for the Davicom DM9102A 10/100 ethernet controller chip. 2000-01-19 19:03:08 +00:00
if_de.c
if_devar.h
if_en_pci.c
if_fxp.c
if_fxpreg.h
if_fxpvar.h
if_lnc_p.c
if_mn.c Change #ifdef KERNEL to #ifdef _KERNEL in the public headers. "KERNEL" 1999-12-29 05:07:58 +00:00
if_rl.c Fix a small typo in the comments. 1999-12-28 06:04:29 +00:00
if_rlreg.h
if_sf.c Modify the Adaptec "starfire" driver to reset the PHY on the MII bus 1999-12-05 20:02:45 +00:00
if_sfreg.h Modify the Adaptec "starfire" driver to reset the PHY on the MII bus 1999-12-05 20:02:45 +00:00
if_sis.c
if_sisreg.h
if_sk.c
if_skreg.h
if_sr_p.c
if_ste.c Spruce up the Sundance ST201 driver: 1999-12-07 20:14:42 +00:00
if_stereg.h Spruce up the Sundance ST201 driver: 1999-12-07 20:14:42 +00:00
if_ti.c Add the vendor/device ID for the Farallon PN9000SX gigabit ethernet 2000-01-18 00:26:29 +00:00
if_tireg.h Add the vendor/device ID for the Farallon PN9000SX gigabit ethernet 2000-01-18 00:26:29 +00:00
if_tl.c Fix the tl driver so it doesn't run off the end of the RX descriptor list 2000-01-15 20:14:49 +00:00
if_tlreg.h
if_tx.c Change incorrect NULLs to 0s 1999-12-21 11:14:12 +00:00
if_txvar.h
if_vr.c
if_vrreg.h
if_wb.c
if_wbreg.h
if_wx.c put things in place for jumbograms 2000-01-25 06:09:53 +00:00
if_wxreg.h define jumbo packet size 2000-01-25 04:11:33 +00:00
if_wxvar.h add PREVIOUS index macro for transmit side 2000-01-23 03:18:14 +00:00
if_xl.c Close PR# 15986: issue an RX reset command when initializing the interface, 2000-01-09 21:12:59 +00:00
if_xlreg.h Update the xl driver to recognize yet another 3c905B/3c905C class NIC: 1999-12-16 18:33:57 +00:00
intpm.c Remove the 'ivars' arguement to device_add_child() and 1999-12-03 08:41:24 +00:00
intpmreg.h
isp_pci.c Remove compile warning not seen when compiling with target mode enabled. 2000-01-15 07:06:44 +00:00
locate.pl
meteor_reg.h
meteor.c
ncr.c Add 53C895A and 53C1510D device description to the ncr chip table. 2000-01-23 12:27:49 +00:00
ncrreg.h
ohci_pci.c Properly teardown the allocated and initialised stuff when an error 2000-01-26 10:52:27 +00:00
pccbb.c Initial import of cardbus bridge driver (cbb) from the latest 1999-11-18 07:14:54 +00:00
pccbbreg.h Initial import of cardbus bridge driver (cbb) from the latest 1999-11-18 07:14:54 +00:00
pccbbvar.h Initial import of cardbus bridge driver (cbb) from the latest 1999-11-18 07:14:54 +00:00
pci_compat.c Zap pci_map_dense() and pci_map_bwx() - they were for compatability but 2000-01-05 16:40:10 +00:00
pci_if.m
pci.c Put a FYI in the compatability shims so that people are aware that they 2000-01-29 15:37:36 +00:00
pcic_p.c Fill in the blanks for some of the Texas Instruments cardbus controllers. 1999-12-31 07:22:24 +00:00
pcic_p.h Fill in the blanks for some of the Texas Instruments cardbus controllers. 1999-12-31 07:22:24 +00:00
pcireg.h Added PCIR_BIOS (0x30). 2000-01-10 12:53:19 +00:00
pcisupport.c Add more PCI VGA graphics card descriptions. 2000-01-27 12:02:06 +00:00
pcivar.h Clean up the cfgmech/pci_mechanism debris. The reason for the existance 2000-01-08 08:31:24 +00:00
scsiiom.c
simos.c
simos.h
ti_fw2.h
ti_fw.h
uhci_pci.c Properly teardown the allocated and initialised stuff when an error 2000-01-26 10:52:27 +00:00
xmaciireg.h
xrpu.c