..
ath_dfs /null
Add a method to explicitly disable radar reporting if required.
2013-01-02 01:36:10 +00:00
ath_hal
Add a new capability flag to announce that the chip implements LNA mixing
2013-06-05 00:42:04 +00:00
ath_rate
I give up - just throw the EWMA update into the normal update_stats()
2013-02-27 04:33:06 +00:00
ah_osdep.c
Fix the HAL debugging to only use one bit to mark a message as unmaskable.
2012-07-01 02:34:32 +00:00
ah_osdep.h
Migrate the ath_hal_filltxdesc() API to take a list of buffer/seglen values.
2012-08-05 10:12:27 +00:00
if_ath_ahb.c
Create a new TX lock specifically for queuing frames.
2013-02-07 07:50:16 +00:00
if_ath_alq.c
Support sending ATH_ALQ messages with no payload.
2013-05-13 21:17:27 +00:00
if_ath_alq.h
Add ALQ beacon debugging.
2013-05-13 21:18:00 +00:00
if_ath_beacon.c
Be (very) careful about how to add more TX DMA work.
2013-05-18 18:27:53 +00:00
if_ath_beacon.h
Overhaul the TXQ locking (again!) as part of some beacon/cabq timing
2013-03-24 00:03:12 +00:00
if_ath_debug.c
TX EDMA debugging fixes:
2012-11-05 07:08:45 +00:00
if_ath_debug.h
Add a debug method to dump the EDMA TX status descriptor contents out.
2012-11-03 04:53:44 +00:00
if_ath_keycache.c
Don't allocate or program a key for the AR5210.
2012-11-19 23:54:05 +00:00
if_ath_keycache.h
Add a 'vap' to ath_keyset().
2011-11-08 19:25:52 +00:00
if_ath_led.c
Bring over the initial 802.11n bluetooth coexistence support code.
2012-06-26 22:16:53 +00:00
if_ath_led.h
Refactor out the software LED config code into a common function, called
2011-12-26 05:46:22 +00:00
if_ath_misc.h
Migrate ath(4) to now use if_transmit instead of the legacy if_start
2013-05-26 22:23:39 +00:00
if_ath_pci.c
Create a new TX lock specifically for queuing frames.
2013-02-07 07:50:16 +00:00
if_ath_rx_edma.c
Use a per-RX-queue deferred list, rather than a single deferred list for
2013-04-16 20:21:02 +00:00
if_ath_rx_edma.h
Begin abstracting out the RX path in preparation for RX EDMA support.
2012-07-03 06:59:12 +00:00
if_ath_rx.c
Implement STBC receive frame statistics.
2013-05-08 01:11:25 +00:00
if_ath_rx.h
Fix the busdma logic to work with EDMA chipsets when using bounce
2013-04-04 08:21:56 +00:00
if_ath_spectral.c
Fix format size.
2013-01-08 22:42:15 +00:00
if_ath_spectral.h
Add a new (skeleton) spectral mode manager module.
2013-01-02 03:59:02 +00:00
if_ath_sysctl.c
Implement a separate hardware queue threshold for aggregate and non-aggr
2013-05-21 18:13:57 +00:00
if_ath_sysctl.h
Break out most of the HAL related tweaks into a per-HAL instance,
2011-06-23 02:38:36 +00:00
if_ath_tdma.c
Enable the use of TDMA on an 802.11n channel (with aggregation disabled,
2013-05-21 18:02:54 +00:00
if_ath_tdma.h
Migrate the TDMA management functions out of if_ath.c into if_ath_tdma.c.
2012-05-20 02:49:42 +00:00
if_ath_tsf.h
Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch].
2012-05-20 02:05:10 +00:00
if_ath_tx_edma.c
Make sure the holding descriptor and link pointer are both freed during
2013-05-10 10:06:45 +00:00
if_ath_tx_edma.h
Begin separating out the TX DMA setup in preparation for TX EDMA support.
2012-07-23 03:52:18 +00:00
if_ath_tx_ht.c
Implement my first cut at "correct" node power-save and
2013-05-15 18:33:05 +00:00
if_ath_tx_ht.h
Implement my first cut at "correct" node power-save and
2013-05-15 18:33:05 +00:00
if_ath_tx.c
Shuffle around the cleanup unpause calls a bit.
2013-05-29 01:40:13 +00:00
if_ath_tx.h
Implement a separate hardware queue threshold for aggregate and non-aggr
2013-05-21 18:13:57 +00:00
if_ath.c
Fix the order of TX shutdown and reset.
2013-06-03 19:39:37 +00:00
if_athdfs.h
Add a method to explicitly disable radar reporting if required.
2013-01-02 01:36:10 +00:00
if_athioctl.h
Implement my first cut at "correct" node power-save and
2013-05-15 18:33:05 +00:00
if_athrate.h
Update the rate series setup code to use the decisions already made in
2013-04-17 07:21:30 +00:00
if_athvar.h
Migrate ath(4) to now use if_transmit instead of the legacy if_start
2013-05-26 22:23:39 +00:00
d98a3d6936