mirror of
https://github.com/freebsd/freebsd-src.git
synced 2024-12-02 08:33:20 +00:00
85 lines
3.1 KiB
Plaintext
85 lines
3.1 KiB
Plaintext
$Id$
|
|
|
|
This version of NTP was converted to the BSD-style Makefile system by
|
|
Garrett Wollman (wollman@freefall.cdrom.com); it is based on version
|
|
3.3s (late beta) from the University of Delaware.
|
|
|
|
Besides the Makefile changes, the DES code has been completely removed
|
|
in order to make this code exportable. If you have a legal copy of
|
|
`authdes.c', you can just add it to the lib/ directory and add `-DDES'
|
|
to the AUTHDEFS in Makefile.inc.
|
|
|
|
You can change CLOCKDEFS in the same file to add other reference clocks.
|
|
|
|
This version of xntpd knows how to talk to the kernelized NTP PLL which is
|
|
present in versions of FreeBSD-current after 21 April 1994. When this code
|
|
is more widely released, I'll provide the patches to Mills.
|
|
|
|
----------------------------------------------------
|
|
Support for Conrad electronic's "DCF-77 Uhr, Mobil".
|
|
----------------------------------------------------
|
|
Conrad electronic in Germany,, Phone (+49) 962230111 (?), sells a gadget
|
|
called "DCF77 Uhr, mobil", which is a DCF77 timecode receiver with a
|
|
rs-232 interface. The price is around DM130.
|
|
9-pin interface is Order# 97 94 57 66
|
|
25-pin interface is Order# 97 94 81 66
|
|
|
|
You must define
|
|
-DDCF77 -DPPS -DFREEBSD_CONRAD -DDEBUG
|
|
when you compile xntpd. You can later remove -DDEBUG, if you feel like it.
|
|
|
|
You must also have
|
|
options COM_BIDIR
|
|
defined in your kernel, and finally the ttyport you intend to use must
|
|
have special interrupt vector:
|
|
device sio1 at isa? port "IO_COM2" tty irq 3 vector siointrts
|
|
^^^^^^^^^^^^
|
|
connect the radio-clock to the tty port and link it to /dev/refclock-0:
|
|
|
|
cd /dev
|
|
sh MAKEDEV cua1
|
|
ln -s /dev/cua01 /dev/refclock-0
|
|
|
|
make a directory to gather statistics in:
|
|
mkdir /var/tmp/ntp
|
|
|
|
Create a /etc/ntp.conf along these lines:
|
|
|
|
# DCF77 without PPS
|
|
server 127.127.8.20
|
|
# DCF77 with PPS
|
|
#server 127.127.8.148 prefer
|
|
|
|
driftfile /var/tmp/ntp/ntp.drift
|
|
statsdir /var/tmp/ntp
|
|
statistics loopstats
|
|
statistics peerstats
|
|
statistics clockstats
|
|
filegen peerstats file peerstats type day enable
|
|
filegen loopstats file loopstats type day enable
|
|
filegen clockstats file clockstats type day enable
|
|
|
|
Try to start it:
|
|
comcontrol ttyd1 bidir
|
|
tickadj -A
|
|
xntpd -d -d -d
|
|
|
|
You should see the red LED flash on the receiver every second now. You
|
|
may have to experiment a bit with the location, and possibly adjust the
|
|
minute variable resistor inside to get a good signal. Be aware, that just
|
|
because you see the light flash, is not the same as the signal being
|
|
received by the computer. The chip doing the work in the reciver uses
|
|
less than 1 micro-ampere, so even if RTS isn't pulled low, it will happily
|
|
receive, but be unable to buffer the signal to the rs-232 levels needed.
|
|
|
|
You can see what's going on in /var/log/messages, and query the
|
|
daemon using xntpdc and ntpq, in particular the "clockvar" command
|
|
of ntpq will tell about the clocks healt.
|
|
|
|
I live in Slagelse, Denmark, which is ~1000 Km from Mainflingen, yet
|
|
I have +/- 2 ms precision from this cheap gadget. If you have a very
|
|
stable signal, you can use the 'pps' address instead to improve your
|
|
timing.
|
|
|
|
Have fun... Poul-Henning Kamp <phk@login.dkuug.dk>
|