jimzah/openafs
1
0
Fork 0
mirror of https://git.openafs.org/openafs.git synced 2025-01-18 23:10:58 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
18b4243772
openafs/doc/man-pages/pod1/fs_rmmount.pod

73 lines
1.9 KiB
Plaintext
Raw Normal View History

man-page-conversion-20051208 This is the initial conversion of the AFS Adminstrators Reference into POD for use as man pages. The man pages are now generated via pod2man from regen.sh so that only those working from CVS have to have pod2man available. The Makefile only installs. The pages have also been sorted out into pod1, pod5, and pod8 directories, making conversion to the right section of man page easier without maintaining a separate list and allowing for names to be duplicated between pod5 and pod1 or pod8 (which will likely be needed in a few cases). This reconversion is done with a new script based on work by Chas Williams. In some cases, the output is worse than the previous POD pages, but this is a more comprehensive conversion. This is only the first step, and this initial conversion has various problems. In addition, the file man pages that didn't have simple names have not been converted in this pass and will be added later. Some of the man pages have syntax problems and all of them have formatting errors. The next editing pass, coming shortly, will clean up most of the remaining mess.
2005-12-08 12:14:33 +00:00
=head1 NAME
man-page-name-underscore-20071111 The NAME heading for man pages can't contain a space in the program side or the man pages won't index with some man implementations.
2007-11-11 22:54:56 +00:00
fs_rmmount - Removes a mount point
man-page-conversion-20051208 This is the initial conversion of the AFS Adminstrators Reference into POD for use as man pages. The man pages are now generated via pod2man from regen.sh so that only those working from CVS have to have pod2man available. The Makefile only installs. The pages have also been sorted out into pod1, pod5, and pod8 directories, making conversion to the right section of man page easier without maintaining a separate list and allowing for names to be duplicated between pod5 and pod1 or pod8 (which will likely be needed in a few cases). This reconversion is done with a new script based on work by Chas Williams. In some cases, the output is worse than the previous POD pages, but this is a more comprehensive conversion. This is only the first step, and this initial conversion has various problems. In addition, the file man pages that didn't have simple names have not been converted in this pass and will be added later. Some of the man pages have syntax problems and all of them have formatting errors. The next editing pass, coming shortly, will clean up most of the remaining mess.
2005-12-08 12:14:33 +00:00
=head1 SYNOPSIS
pretty-html-synopsis-20060228 Implement proper synopsis wrapping for HTML generation. This was done in three pieces. First, add HTML-specific tags to the POD to mark the synopsis for HTML purposes so that we can apply style information to it. Second, update the style sheet to indent all lines except for the first in the synopsis section. Third, add the appropriate S<> tags around option and argument pairs so that we don't wrap between the option and its argument. Unfortunately, due to the <I<foo>> style that looks nicer for other reasons, we have to use the very verbose S<<< >>>. Oh well.
2006-03-01 05:02:29 +00:00
=for html
<div class="synopsis">
man-page-conversion-20051208 This is the initial conversion of the AFS Adminstrators Reference into POD for use as man pages. The man pages are now generated via pod2man from regen.sh so that only those working from CVS have to have pod2man available. The Makefile only installs. The pages have also been sorted out into pod1, pod5, and pod8 directories, making conversion to the right section of man page easier without maintaining a separate list and allowing for names to be duplicated between pod5 and pod1 or pod8 (which will likely be needed in a few cases). This reconversion is done with a new script based on work by Chas Williams. In some cases, the output is worse than the previous POD pages, but this is a more comprehensive conversion. This is only the first step, and this initial conversion has various problems. In addition, the file man pages that didn't have simple names have not been converted in this pass and will be added later. Some of the man pages have syntax problems and all of them have formatting errors. The next editing pass, coming shortly, will clean up most of the remaining mess.
2005-12-08 12:14:33 +00:00
pretty-html-synopsis-20060228 Implement proper synopsis wrapping for HTML generation. This was done in three pieces. First, add HTML-specific tags to the POD to mark the synopsis for HTML purposes so that we can apply style information to it. Second, update the style sheet to indent all lines except for the first in the synopsis section. Third, add the appropriate S<> tags around option and argument pairs so that we don't wrap between the option and its argument. Unfortunately, due to the <I<foo>> style that looks nicer for other reasons, we have to use the very verbose S<<< >>>. Oh well.
2006-03-01 05:02:29 +00:00
B<fs rmmount> S<<< B<-dir> <I<directory>>+ >>> [B<-help>]
B<fs rm> S<<< B<-d> <I<directory>>+ >>> [B<-h>]
=for html
</div>
man-page-conversion-20051208 This is the initial conversion of the AFS Adminstrators Reference into POD for use as man pages. The man pages are now generated via pod2man from regen.sh so that only those working from CVS have to have pod2man available. The Makefile only installs. The pages have also been sorted out into pod1, pod5, and pod8 directories, making conversion to the right section of man page easier without maintaining a separate list and allowing for names to be duplicated between pod5 and pod1 or pod8 (which will likely be needed in a few cases). This reconversion is done with a new script based on work by Chas Williams. In some cases, the output is worse than the previous POD pages, but this is a more comprehensive conversion. This is only the first step, and this initial conversion has various problems. In addition, the file man pages that didn't have simple names have not been converted in this pass and will be added later. Some of the man pages have syntax problems and all of them have formatting errors. The next editing pass, coming shortly, will clean up most of the remaining mess.
2005-12-08 12:14:33 +00:00
=head1 DESCRIPTION
man1-editing-pass-20051209 Complete an initial editing and cleanup pass for all section one man pages. Fix various conversion problems, formatting inconsistencies, and obvious problems. Please note that no editing for content has yet been done; this is solely editing for formatting and correct conversion to POD. Also, add some additional section five man pages that were omitted from the first conversion run due to unusual file names, and globally replace CAVEATS with CAUTIONS in the man pages to match the original section name. The section one man pages should now be in reasonable shape and ready for additional review and further updates, although there are probably still remaining obvious problems. ==================== This delta was composed from multiple commits as part of the CVS->Git migration. The checkin message with each commit was inconsistent. The following are the additional commit messages. ==================== This file got the wrong name when it was originally committed. Fix.
2005-12-09 14:48:56 +00:00
The fs rmmount command removes the mount point named by the B<-dir>
argument from the file system. The corresponding volume remains on its
host partition or partitions, but is inaccessible if there are no other
mount points for it.
man-page-conversion-20051208 This is the initial conversion of the AFS Adminstrators Reference into POD for use as man pages. The man pages are now generated via pod2man from regen.sh so that only those working from CVS have to have pod2man available. The Makefile only installs. The pages have also been sorted out into pod1, pod5, and pod8 directories, making conversion to the right section of man page easier without maintaining a separate list and allowing for names to be duplicated between pod5 and pod1 or pod8 (which will likely be needed in a few cases). This reconversion is done with a new script based on work by Chas Williams. In some cases, the output is worse than the previous POD pages, but this is a more comprehensive conversion. This is only the first step, and this initial conversion has various problems. In addition, the file man pages that didn't have simple names have not been converted in this pass and will be added later. Some of the man pages have syntax problems and all of them have formatting errors. The next editing pass, coming shortly, will clean up most of the remaining mess.
2005-12-08 12:14:33 +00:00
=head1 OPTIONS
=over 4
man1-editing-pass-20051209 Complete an initial editing and cleanup pass for all section one man pages. Fix various conversion problems, formatting inconsistencies, and obvious problems. Please note that no editing for content has yet been done; this is solely editing for formatting and correct conversion to POD. Also, add some additional section five man pages that were omitted from the first conversion run due to unusual file names, and globally replace CAVEATS with CAUTIONS in the man pages to match the original section name. The section one man pages should now be in reasonable shape and ready for additional review and further updates, although there are probably still remaining obvious problems. ==================== This delta was composed from multiple commits as part of the CVS->Git migration. The checkin message with each commit was inconsistent. The following are the additional commit messages. ==================== This file got the wrong name when it was originally committed. Fix.
2005-12-09 14:48:56 +00:00
=item B<-dir> <I<directory>>+
man-page-conversion-20051208 This is the initial conversion of the AFS Adminstrators Reference into POD for use as man pages. The man pages are now generated via pod2man from regen.sh so that only those working from CVS have to have pod2man available. The Makefile only installs. The pages have also been sorted out into pod1, pod5, and pod8 directories, making conversion to the right section of man page easier without maintaining a separate list and allowing for names to be duplicated between pod5 and pod1 or pod8 (which will likely be needed in a few cases). This reconversion is done with a new script based on work by Chas Williams. In some cases, the output is worse than the previous POD pages, but this is a more comprehensive conversion. This is only the first step, and this initial conversion has various problems. In addition, the file man pages that didn't have simple names have not been converted in this pass and will be added later. Some of the man pages have syntax problems and all of them have formatting errors. The next editing pass, coming shortly, will clean up most of the remaining mess.
2005-12-08 12:14:33 +00:00
man1-editing-pass-20051209 Complete an initial editing and cleanup pass for all section one man pages. Fix various conversion problems, formatting inconsistencies, and obvious problems. Please note that no editing for content has yet been done; this is solely editing for formatting and correct conversion to POD. Also, add some additional section five man pages that were omitted from the first conversion run due to unusual file names, and globally replace CAVEATS with CAUTIONS in the man pages to match the original section name. The section one man pages should now be in reasonable shape and ready for additional review and further updates, although there are probably still remaining obvious problems. ==================== This delta was composed from multiple commits as part of the CVS->Git migration. The checkin message with each commit was inconsistent. The following are the additional commit messages. ==================== This file got the wrong name when it was originally committed. Fix.
2005-12-09 14:48:56 +00:00
Names the mount point to delete from the file system. The last element in
the pathname must be an actual name, not a shorthand notation such as
"dot" (C<.>) or "dot dot" (C<..>).
man-page-conversion-20051208 This is the initial conversion of the AFS Adminstrators Reference into POD for use as man pages. The man pages are now generated via pod2man from regen.sh so that only those working from CVS have to have pod2man available. The Makefile only installs. The pages have also been sorted out into pod1, pod5, and pod8 directories, making conversion to the right section of man page easier without maintaining a separate list and allowing for names to be duplicated between pod5 and pod1 or pod8 (which will likely be needed in a few cases). This reconversion is done with a new script based on work by Chas Williams. In some cases, the output is worse than the previous POD pages, but this is a more comprehensive conversion. This is only the first step, and this initial conversion has various problems. In addition, the file man pages that didn't have simple names have not been converted in this pass and will be added later. Some of the man pages have syntax problems and all of them have formatting errors. The next editing pass, coming shortly, will clean up most of the remaining mess.
2005-12-08 12:14:33 +00:00
Specify the read/write path to the directory, to avoid the failure that
results from attempting to delete a mount point from a read-only
volume. By convention, the read/write path is indicated by placing a
period before the cell name at the pathname's second level (for example,
doc: replace hostnames with IETF example hostnames There were several different real and made-up hostnames and company names used throughout our documentation examples. The IETF has reserved "example.com" and other "example" TLDs for use in examples (RFC 2606). Replace almost all references to ABC Corporation, DEF Corporation, and State University, as well as "abc.com", "bigcell.com", "def.com", "def.gov", "ghi.com", "ghi.gov", "jkl.com", "mit.edu", "stanford.edu", "state.edu", "stateu.edu", "uncc.edu", and "xyz.com". Standardize on "Example Corporation", "Example Network", "Example Organization" (example.com, example.net, and example.org). The Scout documentation in the Admin Guide contains PNG images that contain the old cell names, so I left those references until the images can be replaced. Change-Id: I4e44815b2d2ffe204810b7fd850842248f67c367 Reviewed-on: http://gerrit.openafs.org/6697 Reviewed-by: Jeffrey Altman <jaltman@secure-endpoints.com> Tested-by: Jeffrey Altman <jaltman@secure-endpoints.com>
2012-02-11 16:43:30 +00:00
F</afs/.example.com>). For further discussion of the concept of read/write and
man1-editing-pass-20051209 Complete an initial editing and cleanup pass for all section one man pages. Fix various conversion problems, formatting inconsistencies, and obvious problems. Please note that no editing for content has yet been done; this is solely editing for formatting and correct conversion to POD. Also, add some additional section five man pages that were omitted from the first conversion run due to unusual file names, and globally replace CAVEATS with CAUTIONS in the man pages to match the original section name. The section one man pages should now be in reasonable shape and ready for additional review and further updates, although there are probably still remaining obvious problems. ==================== This delta was composed from multiple commits as part of the CVS->Git migration. The checkin message with each commit was inconsistent. The following are the additional commit messages. ==================== This file got the wrong name when it was originally committed. Fix.
2005-12-09 14:48:56 +00:00
read-only paths through the filespace, see the B<fs mkmount> reference
page.
man-page-conversion-20051208 This is the initial conversion of the AFS Adminstrators Reference into POD for use as man pages. The man pages are now generated via pod2man from regen.sh so that only those working from CVS have to have pod2man available. The Makefile only installs. The pages have also been sorted out into pod1, pod5, and pod8 directories, making conversion to the right section of man page easier without maintaining a separate list and allowing for names to be duplicated between pod5 and pod1 or pod8 (which will likely be needed in a few cases). This reconversion is done with a new script based on work by Chas Williams. In some cases, the output is worse than the previous POD pages, but this is a more comprehensive conversion. This is only the first step, and this initial conversion has various problems. In addition, the file man pages that didn't have simple names have not been converted in this pass and will be added later. Some of the man pages have syntax problems and all of them have formatting errors. The next editing pass, coming shortly, will clean up most of the remaining mess.
2005-12-08 12:14:33 +00:00
man1-editing-pass-20051209 Complete an initial editing and cleanup pass for all section one man pages. Fix various conversion problems, formatting inconsistencies, and obvious problems. Please note that no editing for content has yet been done; this is solely editing for formatting and correct conversion to POD. Also, add some additional section five man pages that were omitted from the first conversion run due to unusual file names, and globally replace CAVEATS with CAUTIONS in the man pages to match the original section name. The section one man pages should now be in reasonable shape and ready for additional review and further updates, although there are probably still remaining obvious problems. ==================== This delta was composed from multiple commits as part of the CVS->Git migration. The checkin message with each commit was inconsistent. The following are the additional commit messages. ==================== This file got the wrong name when it was originally committed. Fix.
2005-12-09 14:48:56 +00:00
=item B<-help>
man-page-conversion-20051208 This is the initial conversion of the AFS Adminstrators Reference into POD for use as man pages. The man pages are now generated via pod2man from regen.sh so that only those working from CVS have to have pod2man available. The Makefile only installs. The pages have also been sorted out into pod1, pod5, and pod8 directories, making conversion to the right section of man page easier without maintaining a separate list and allowing for names to be duplicated between pod5 and pod1 or pod8 (which will likely be needed in a few cases). This reconversion is done with a new script based on work by Chas Williams. In some cases, the output is worse than the previous POD pages, but this is a more comprehensive conversion. This is only the first step, and this initial conversion has various problems. In addition, the file man pages that didn't have simple names have not been converted in this pass and will be added later. Some of the man pages have syntax problems and all of them have formatting errors. The next editing pass, coming shortly, will clean up most of the remaining mess.
2005-12-08 12:14:33 +00:00
man1-editing-pass-20051209 Complete an initial editing and cleanup pass for all section one man pages. Fix various conversion problems, formatting inconsistencies, and obvious problems. Please note that no editing for content has yet been done; this is solely editing for formatting and correct conversion to POD. Also, add some additional section five man pages that were omitted from the first conversion run due to unusual file names, and globally replace CAVEATS with CAUTIONS in the man pages to match the original section name. The section one man pages should now be in reasonable shape and ready for additional review and further updates, although there are probably still remaining obvious problems. ==================== This delta was composed from multiple commits as part of the CVS->Git migration. The checkin message with each commit was inconsistent. The following are the additional commit messages. ==================== This file got the wrong name when it was originally committed. Fix.
2005-12-09 14:48:56 +00:00
Prints the online help for this command. All other valid options are
ignored.
man-page-conversion-20051208 This is the initial conversion of the AFS Adminstrators Reference into POD for use as man pages. The man pages are now generated via pod2man from regen.sh so that only those working from CVS have to have pod2man available. The Makefile only installs. The pages have also been sorted out into pod1, pod5, and pod8 directories, making conversion to the right section of man page easier without maintaining a separate list and allowing for names to be duplicated between pod5 and pod1 or pod8 (which will likely be needed in a few cases). This reconversion is done with a new script based on work by Chas Williams. In some cases, the output is worse than the previous POD pages, but this is a more comprehensive conversion. This is only the first step, and this initial conversion has various problems. In addition, the file man pages that didn't have simple names have not been converted in this pass and will be added later. Some of the man pages have syntax problems and all of them have formatting errors. The next editing pass, coming shortly, will clean up most of the remaining mess.
2005-12-08 12:14:33 +00:00
=back
=head1 EXAMPLES
man1-editing-pass-20051209 Complete an initial editing and cleanup pass for all section one man pages. Fix various conversion problems, formatting inconsistencies, and obvious problems. Please note that no editing for content has yet been done; this is solely editing for formatting and correct conversion to POD. Also, add some additional section five man pages that were omitted from the first conversion run due to unusual file names, and globally replace CAVEATS with CAUTIONS in the man pages to match the original section name. The section one man pages should now be in reasonable shape and ready for additional review and further updates, although there are probably still remaining obvious problems. ==================== This delta was composed from multiple commits as part of the CVS->Git migration. The checkin message with each commit was inconsistent. The following are the additional commit messages. ==================== This file got the wrong name when it was originally committed. Fix.
2005-12-09 14:48:56 +00:00
The following command removes the mount points F<jones> and F<terry> from
doc: replace hostnames with IETF example hostnames There were several different real and made-up hostnames and company names used throughout our documentation examples. The IETF has reserved "example.com" and other "example" TLDs for use in examples (RFC 2606). Replace almost all references to ABC Corporation, DEF Corporation, and State University, as well as "abc.com", "bigcell.com", "def.com", "def.gov", "ghi.com", "ghi.gov", "jkl.com", "mit.edu", "stanford.edu", "state.edu", "stateu.edu", "uncc.edu", and "xyz.com". Standardize on "Example Corporation", "Example Network", "Example Organization" (example.com, example.net, and example.org). The Scout documentation in the Admin Guide contains PNG images that contain the old cell names, so I left those references until the images can be replaced. Change-Id: I4e44815b2d2ffe204810b7fd850842248f67c367 Reviewed-on: http://gerrit.openafs.org/6697 Reviewed-by: Jeffrey Altman <jaltman@secure-endpoints.com> Tested-by: Jeffrey Altman <jaltman@secure-endpoints.com>
2012-02-11 16:43:30 +00:00
the current working directory (the F</afs/example.com/usr> directory).
man-page-conversion-20051208 This is the initial conversion of the AFS Adminstrators Reference into POD for use as man pages. The man pages are now generated via pod2man from regen.sh so that only those working from CVS have to have pod2man available. The Makefile only installs. The pages have also been sorted out into pod1, pod5, and pod8 directories, making conversion to the right section of man page easier without maintaining a separate list and allowing for names to be duplicated between pod5 and pod1 or pod8 (which will likely be needed in a few cases). This reconversion is done with a new script based on work by Chas Williams. In some cases, the output is worse than the previous POD pages, but this is a more comprehensive conversion. This is only the first step, and this initial conversion has various problems. In addition, the file man pages that didn't have simple names have not been converted in this pass and will be added later. Some of the man pages have syntax problems and all of them have formatting errors. The next editing pass, coming shortly, will clean up most of the remaining mess.
2005-12-08 12:14:33 +00:00
% fs rmmount jones terry
=head1 PRIVILEGE REQUIRED
man1-editing-pass-20051209 Complete an initial editing and cleanup pass for all section one man pages. Fix various conversion problems, formatting inconsistencies, and obvious problems. Please note that no editing for content has yet been done; this is solely editing for formatting and correct conversion to POD. Also, add some additional section five man pages that were omitted from the first conversion run due to unusual file names, and globally replace CAVEATS with CAUTIONS in the man pages to match the original section name. The section one man pages should now be in reasonable shape and ready for additional review and further updates, although there are probably still remaining obvious problems. ==================== This delta was composed from multiple commits as part of the CVS->Git migration. The checkin message with each commit was inconsistent. The following are the additional commit messages. ==================== This file got the wrong name when it was originally committed. Fix.
2005-12-09 14:48:56 +00:00
The issuer must have the C<d> (delete) permission on the ACL of the
directory that houses each mount point.
man-page-conversion-20051208 This is the initial conversion of the AFS Adminstrators Reference into POD for use as man pages. The man pages are now generated via pod2man from regen.sh so that only those working from CVS have to have pod2man available. The Makefile only installs. The pages have also been sorted out into pod1, pod5, and pod8 directories, making conversion to the right section of man page easier without maintaining a separate list and allowing for names to be duplicated between pod5 and pod1 or pod8 (which will likely be needed in a few cases). This reconversion is done with a new script based on work by Chas Williams. In some cases, the output is worse than the previous POD pages, but this is a more comprehensive conversion. This is only the first step, and this initial conversion has various problems. In addition, the file man pages that didn't have simple names have not been converted in this pass and will be added later. Some of the man pages have syntax problems and all of them have formatting errors. The next editing pass, coming shortly, will clean up most of the remaining mess.
2005-12-08 12:14:33 +00:00
=head1 SEE ALSO
L<fs_lsmount(1)>,
L<fs_mkmount(1)>
=head1 COPYRIGHT
IBM Corporation 2000. <http://www.ibm.com/> All Rights Reserved.
This documentation is covered by the IBM Public License Version 1.0. It was
converted from HTML to POD by software written by Chas Williams and Russ
Allbery, based on work by Alf Wachsmann and Elizabeth Cassell.
Reference in New Issue Copy Permalink