jimzah/openafs
1
0
Fork 0
mirror of https://git.openafs.org/openafs.git synced 2025-01-19 07:20:11 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
99d0070673
openafs/doc/man-pages/pod8/kas_interactive.pod

159 lines
5.0 KiB
Plaintext
Raw Normal View History

man-page-conversion-20051208 This is the initial conversion of the AFS Adminstrators Reference into POD for use as man pages. The man pages are now generated via pod2man from regen.sh so that only those working from CVS have to have pod2man available. The Makefile only installs. The pages have also been sorted out into pod1, pod5, and pod8 directories, making conversion to the right section of man page easier without maintaining a separate list and allowing for names to be duplicated between pod5 and pod1 or pod8 (which will likely be needed in a few cases). This reconversion is done with a new script based on work by Chas Williams. In some cases, the output is worse than the previous POD pages, but this is a more comprehensive conversion. This is only the first step, and this initial conversion has various problems. In addition, the file man pages that didn't have simple names have not been converted in this pass and will be added later. Some of the man pages have syntax problems and all of them have formatting errors. The next editing pass, coming shortly, will clean up most of the remaining mess.
2005-12-08 12:14:33 +00:00
=head1 NAME
man-page-name-underscore-20071111 The NAME heading for man pages can't contain a space in the program side or the man pages won't index with some man implementations.
2007-11-11 22:54:56 +00:00
kas_interactive - Enters interactive mode
man-page-conversion-20051208 This is the initial conversion of the AFS Adminstrators Reference into POD for use as man pages. The man pages are now generated via pod2man from regen.sh so that only those working from CVS have to have pod2man available. The Makefile only installs. The pages have also been sorted out into pod1, pod5, and pod8 directories, making conversion to the right section of man page easier without maintaining a separate list and allowing for names to be duplicated between pod5 and pod1 or pod8 (which will likely be needed in a few cases). This reconversion is done with a new script based on work by Chas Williams. In some cases, the output is worse than the previous POD pages, but this is a more comprehensive conversion. This is only the first step, and this initial conversion has various problems. In addition, the file man pages that didn't have simple names have not been converted in this pass and will be added later. Some of the man pages have syntax problems and all of them have formatting errors. The next editing pass, coming shortly, will clean up most of the remaining mess.
2005-12-08 12:14:33 +00:00
=head1 SYNOPSIS
pretty-html-synopsis-20060228 Implement proper synopsis wrapping for HTML generation. This was done in three pieces. First, add HTML-specific tags to the POD to mark the synopsis for HTML purposes so that we can apply style information to it. Second, update the style sheet to indent all lines except for the first in the synopsis section. Third, add the appropriate S<> tags around option and argument pairs so that we don't wrap between the option and its argument. Unfortunately, due to the <I<foo>> style that looks nicer for other reasons, we have to use the very verbose S<<< >>>. Oh well.
2006-03-01 05:02:29 +00:00
=for html
<div class="synopsis">
man8-editing-pass-20051213 This completes the initial editing pass of the section eight man pages. Only small amounts of content editing has been done. Some known problems have been noted in README, but there will doubtless be others, as well as some lingering formatting problems. However, the quality should now be good enough for general public review. Some of the section eight man pages were really supposed to be section one, the package apropros and package help commands are too useless to document, and a few of the difficult-to-name section five man pages have now acquired names.
2005-12-13 19:21:13 +00:00
B<kas interactive>
pretty-html-synopsis-20060228 Implement proper synopsis wrapping for HTML generation. This was done in three pieces. First, add HTML-specific tags to the POD to mark the synopsis for HTML purposes so that we can apply style information to it. Second, update the style sheet to indent all lines except for the first in the synopsis section. Third, add the appropriate S<> tags around option and argument pairs so that we don't wrap between the option and its argument. Unfortunately, due to the <I<foo>> style that looks nicer for other reasons, we have to use the very verbose S<<< >>>. Oh well.
2006-03-01 05:02:29 +00:00
S<<< [B<-admin_username> <I<admin principal to use for authentication>>] >>>
S<<< [B<-password_for_admin> <I<admin password>>] >>> S<<< [B<-cell> <I<cell name>>] >>>
S<<< [B<-servers> <I<explicit list of authentication servers>>+] >>>
man8-editing-pass-20051213 This completes the initial editing pass of the section eight man pages. Only small amounts of content editing has been done. Some known problems have been noted in README, but there will doubtless be others, as well as some lingering formatting problems. However, the quality should now be good enough for general public review. Some of the section eight man pages were really supposed to be section one, the package apropros and package help commands are too useless to document, and a few of the difficult-to-name section five man pages have now acquired names.
2005-12-13 19:21:13 +00:00
[B<-noauth>] [B<-help>]
man-page-conversion-20051208 This is the initial conversion of the AFS Adminstrators Reference into POD for use as man pages. The man pages are now generated via pod2man from regen.sh so that only those working from CVS have to have pod2man available. The Makefile only installs. The pages have also been sorted out into pod1, pod5, and pod8 directories, making conversion to the right section of man page easier without maintaining a separate list and allowing for names to be duplicated between pod5 and pod1 or pod8 (which will likely be needed in a few cases). This reconversion is done with a new script based on work by Chas Williams. In some cases, the output is worse than the previous POD pages, but this is a more comprehensive conversion. This is only the first step, and this initial conversion has various problems. In addition, the file man pages that didn't have simple names have not been converted in this pass and will be added later. Some of the man pages have syntax problems and all of them have formatting errors. The next editing pass, coming shortly, will clean up most of the remaining mess.
2005-12-08 12:14:33 +00:00
pretty-html-synopsis-20060228 Implement proper synopsis wrapping for HTML generation. This was done in three pieces. First, add HTML-specific tags to the POD to mark the synopsis for HTML purposes so that we can apply style information to it. Second, update the style sheet to indent all lines except for the first in the synopsis section. Third, add the appropriate S<> tags around option and argument pairs so that we don't wrap between the option and its argument. Unfortunately, due to the <I<foo>> style that looks nicer for other reasons, we have to use the very verbose S<<< >>>. Oh well.
2006-03-01 05:02:29 +00:00
B<kas i> S<<< [B<-a> <I<admin principal to use for authentication>>] >>>
S<<< [B<-p> <I<admin password>>] >>> S<<< [B<-c> <I<cell name>>] >>>
S<<< [B<-s> <I<explicit list of authentication servers>>+] >>> [B<-n>] [B<-h>]
=for html
</div>
man-page-conversion-20051208 This is the initial conversion of the AFS Adminstrators Reference into POD for use as man pages. The man pages are now generated via pod2man from regen.sh so that only those working from CVS have to have pod2man available. The Makefile only installs. The pages have also been sorted out into pod1, pod5, and pod8 directories, making conversion to the right section of man page easier without maintaining a separate list and allowing for names to be duplicated between pod5 and pod1 or pod8 (which will likely be needed in a few cases). This reconversion is done with a new script based on work by Chas Williams. In some cases, the output is worse than the previous POD pages, but this is a more comprehensive conversion. This is only the first step, and this initial conversion has various problems. In addition, the file man pages that didn't have simple names have not been converted in this pass and will be added later. Some of the man pages have syntax problems and all of them have formatting errors. The next editing pass, coming shortly, will clean up most of the remaining mess.
2005-12-08 12:14:33 +00:00
=head1 DESCRIPTION
man8-editing-pass-20051213 This completes the initial editing pass of the section eight man pages. Only small amounts of content editing has been done. Some known problems have been noted in README, but there will doubtless be others, as well as some lingering formatting problems. However, the quality should now be good enough for general public review. Some of the section eight man pages were really supposed to be section one, the package apropros and package help commands are too useless to document, and a few of the difficult-to-name section five man pages have now acquired names.
2005-12-13 19:21:13 +00:00
The B<kas interactive> command establishes an interactive session for the
issuer of the command. By default, the command interpreter establishes an
authenticated connection for the user logged into the local file system
with all of the Authentication Servers listed in the local
F</usr/vice/etc/CellServDB> file for the cell named in the local
F</usr/vice/etc/ThisCell> file. To specify an alternate identity, cell
name, or list of Authentication Servers, include the B<-admin_username>,
B<-cell>, or B<-servers> arguments respectively. Interactive mode lasts
for six hours unless the maximum ticket lifetime for the issuer or the
Authentication Server's Ticket Granting Service is shorter.
man-page-conversion-20051208 This is the initial conversion of the AFS Adminstrators Reference into POD for use as man pages. The man pages are now generated via pod2man from regen.sh so that only those working from CVS have to have pod2man available. The Makefile only installs. The pages have also been sorted out into pod1, pod5, and pod8 directories, making conversion to the right section of man page easier without maintaining a separate list and allowing for names to be duplicated between pod5 and pod1 or pod8 (which will likely be needed in a few cases). This reconversion is done with a new script based on work by Chas Williams. In some cases, the output is worse than the previous POD pages, but this is a more comprehensive conversion. This is only the first step, and this initial conversion has various problems. In addition, the file man pages that didn't have simple names have not been converted in this pass and will be added later. Some of the man pages have syntax problems and all of them have formatting errors. The next editing pass, coming shortly, will clean up most of the remaining mess.
2005-12-08 12:14:33 +00:00
There are two other ways to enter interactive mode, in addition to the
B<kas interactive> command:
man8-editing-pass-20051213 This completes the initial editing pass of the section eight man pages. Only small amounts of content editing has been done. Some known problems have been noted in README, but there will doubtless be others, as well as some lingering formatting problems. However, the quality should now be good enough for general public review. Some of the section eight man pages were really supposed to be section one, the package apropros and package help commands are too useless to document, and a few of the difficult-to-name section five man pages have now acquired names.
2005-12-13 19:21:13 +00:00
=over 4
man-page-conversion-20051208 This is the initial conversion of the AFS Adminstrators Reference into POD for use as man pages. The man pages are now generated via pod2man from regen.sh so that only those working from CVS have to have pod2man available. The Makefile only installs. The pages have also been sorted out into pod1, pod5, and pod8 directories, making conversion to the right section of man page easier without maintaining a separate list and allowing for names to be duplicated between pod5 and pod1 or pod8 (which will likely be needed in a few cases). This reconversion is done with a new script based on work by Chas Williams. In some cases, the output is worse than the previous POD pages, but this is a more comprehensive conversion. This is only the first step, and this initial conversion has various problems. In addition, the file man pages that didn't have simple names have not been converted in this pass and will be added later. Some of the man pages have syntax problems and all of them have formatting errors. The next editing pass, coming shortly, will clean up most of the remaining mess.
2005-12-08 12:14:33 +00:00
man8-editing-pass-20051213 This completes the initial editing pass of the section eight man pages. Only small amounts of content editing has been done. Some known problems have been noted in README, but there will doubtless be others, as well as some lingering formatting problems. However, the quality should now be good enough for general public review. Some of the section eight man pages were really supposed to be section one, the package apropros and package help commands are too useless to document, and a few of the difficult-to-name section five man pages have now acquired names.
2005-12-13 19:21:13 +00:00
=item *
man-page-conversion-20051208 This is the initial conversion of the AFS Adminstrators Reference into POD for use as man pages. The man pages are now generated via pod2man from regen.sh so that only those working from CVS have to have pod2man available. The Makefile only installs. The pages have also been sorted out into pod1, pod5, and pod8 directories, making conversion to the right section of man page easier without maintaining a separate list and allowing for names to be duplicated between pod5 and pod1 or pod8 (which will likely be needed in a few cases). This reconversion is done with a new script based on work by Chas Williams. In some cases, the output is worse than the previous POD pages, but this is a more comprehensive conversion. This is only the first step, and this initial conversion has various problems. In addition, the file man pages that didn't have simple names have not been converted in this pass and will be added later. Some of the man pages have syntax problems and all of them have formatting errors. The next editing pass, coming shortly, will clean up most of the remaining mess.
2005-12-08 12:14:33 +00:00
man8-editing-pass-20051213 This completes the initial editing pass of the section eight man pages. Only small amounts of content editing has been done. Some known problems have been noted in README, but there will doubtless be others, as well as some lingering formatting problems. However, the quality should now be good enough for general public review. Some of the section eight man pages were really supposed to be section one, the package apropros and package help commands are too useless to document, and a few of the difficult-to-name section five man pages have now acquired names.
2005-12-13 19:21:13 +00:00
Type the kas command at the shell prompt without any operation code. If
appropriate, include one or more of the B<-admin_username>,
B<-password_for_admin>, B<-cell>, and B<-servers> arguments.
man-page-conversion-20051208 This is the initial conversion of the AFS Adminstrators Reference into POD for use as man pages. The man pages are now generated via pod2man from regen.sh so that only those working from CVS have to have pod2man available. The Makefile only installs. The pages have also been sorted out into pod1, pod5, and pod8 directories, making conversion to the right section of man page easier without maintaining a separate list and allowing for names to be duplicated between pod5 and pod1 or pod8 (which will likely be needed in a few cases). This reconversion is done with a new script based on work by Chas Williams. In some cases, the output is worse than the previous POD pages, but this is a more comprehensive conversion. This is only the first step, and this initial conversion has various problems. In addition, the file man pages that didn't have simple names have not been converted in this pass and will be added later. Some of the man pages have syntax problems and all of them have formatting errors. The next editing pass, coming shortly, will clean up most of the remaining mess.
2005-12-08 12:14:33 +00:00
=item *
man8-editing-pass-20051213 This completes the initial editing pass of the section eight man pages. Only small amounts of content editing has been done. Some known problems have been noted in README, but there will doubtless be others, as well as some lingering formatting problems. However, the quality should now be good enough for general public review. Some of the section eight man pages were really supposed to be section one, the package apropros and package help commands are too useless to document, and a few of the difficult-to-name section five man pages have now acquired names.
2005-12-13 19:21:13 +00:00
Type the kas command followed by a user name and cell name, separated by
an C<@> sign (for example: B<kas admin@abc.com>), to establish a
connection under the specified identity with the Authentication Servers
listed in the local F</usr/vice/etc/CellServDB> file for the indicated
cell. If appropriate, provide the B<-servers> argument to specify an
alternate list of Authentication Server machines that belong to the
indicated cell.
man-page-conversion-20051208 This is the initial conversion of the AFS Adminstrators Reference into POD for use as man pages. The man pages are now generated via pod2man from regen.sh so that only those working from CVS have to have pod2man available. The Makefile only installs. The pages have also been sorted out into pod1, pod5, and pod8 directories, making conversion to the right section of man page easier without maintaining a separate list and allowing for names to be duplicated between pod5 and pod1 or pod8 (which will likely be needed in a few cases). This reconversion is done with a new script based on work by Chas Williams. In some cases, the output is worse than the previous POD pages, but this is a more comprehensive conversion. This is only the first step, and this initial conversion has various problems. In addition, the file man pages that didn't have simple names have not been converted in this pass and will be added later. Some of the man pages have syntax problems and all of them have formatting errors. The next editing pass, coming shortly, will clean up most of the remaining mess.
2005-12-08 12:14:33 +00:00
man8-editing-pass-20051213 This completes the initial editing pass of the section eight man pages. Only small amounts of content editing has been done. Some known problems have been noted in README, but there will doubtless be others, as well as some lingering formatting problems. However, the quality should now be good enough for general public review. Some of the section eight man pages were really supposed to be section one, the package apropros and package help commands are too useless to document, and a few of the difficult-to-name section five man pages have now acquired names.
2005-12-13 19:21:13 +00:00
=back
man-page-conversion-20051208 This is the initial conversion of the AFS Adminstrators Reference into POD for use as man pages. The man pages are now generated via pod2man from regen.sh so that only those working from CVS have to have pod2man available. The Makefile only installs. The pages have also been sorted out into pod1, pod5, and pod8 directories, making conversion to the right section of man page easier without maintaining a separate list and allowing for names to be duplicated between pod5 and pod1 or pod8 (which will likely be needed in a few cases). This reconversion is done with a new script based on work by Chas Williams. In some cases, the output is worse than the previous POD pages, but this is a more comprehensive conversion. This is only the first step, and this initial conversion has various problems. In addition, the file man pages that didn't have simple names have not been converted in this pass and will be added later. Some of the man pages have syntax problems and all of them have formatting errors. The next editing pass, coming shortly, will clean up most of the remaining mess.
2005-12-08 12:14:33 +00:00
There are several consequences of entering interactive mode:
=over 4
=item *
man8-editing-pass-20051213 This completes the initial editing pass of the section eight man pages. Only small amounts of content editing has been done. Some known problems have been noted in README, but there will doubtless be others, as well as some lingering formatting problems. However, the quality should now be good enough for general public review. Some of the section eight man pages were really supposed to be section one, the package apropros and package help commands are too useless to document, and a few of the difficult-to-name section five man pages have now acquired names.
2005-12-13 19:21:13 +00:00
The C<< ka> >> prompt replaces the system (shell) prompt. When typing
commands at this prompt, provide only the operation code (omit the command
suite name, B<kas>).
man-page-conversion-20051208 This is the initial conversion of the AFS Adminstrators Reference into POD for use as man pages. The man pages are now generated via pod2man from regen.sh so that only those working from CVS have to have pod2man available. The Makefile only installs. The pages have also been sorted out into pod1, pod5, and pod8 directories, making conversion to the right section of man page easier without maintaining a separate list and allowing for names to be duplicated between pod5 and pod1 or pod8 (which will likely be needed in a few cases). This reconversion is done with a new script based on work by Chas Williams. In some cases, the output is worse than the previous POD pages, but this is a more comprehensive conversion. This is only the first step, and this initial conversion has various problems. In addition, the file man pages that didn't have simple names have not been converted in this pass and will be added later. Some of the man pages have syntax problems and all of them have formatting errors. The next editing pass, coming shortly, will clean up most of the remaining mess.
2005-12-08 12:14:33 +00:00
=item *
man8-editing-pass-20051213 This completes the initial editing pass of the section eight man pages. Only small amounts of content editing has been done. Some known problems have been noted in README, but there will doubtless be others, as well as some lingering formatting problems. However, the quality should now be good enough for general public review. Some of the section eight man pages were really supposed to be section one, the package apropros and package help commands are too useless to document, and a few of the difficult-to-name section five man pages have now acquired names.
2005-12-13 19:21:13 +00:00
The command interpreter does not prompt for the issuer's password.
man-page-conversion-20051208 This is the initial conversion of the AFS Adminstrators Reference into POD for use as man pages. The man pages are now generated via pod2man from regen.sh so that only those working from CVS have to have pod2man available. The Makefile only installs. The pages have also been sorted out into pod1, pod5, and pod8 directories, making conversion to the right section of man page easier without maintaining a separate list and allowing for names to be duplicated between pod5 and pod1 or pod8 (which will likely be needed in a few cases). This reconversion is done with a new script based on work by Chas Williams. In some cases, the output is worse than the previous POD pages, but this is a more comprehensive conversion. This is only the first step, and this initial conversion has various problems. In addition, the file man pages that didn't have simple names have not been converted in this pass and will be added later. Some of the man pages have syntax problems and all of them have formatting errors. The next editing pass, coming shortly, will clean up most of the remaining mess.
2005-12-08 12:14:33 +00:00
The issuer's identity and password, the relevant cell, and the set of
man8-editing-pass-20051213 This completes the initial editing pass of the section eight man pages. Only small amounts of content editing has been done. Some known problems have been noted in README, but there will doubtless be others, as well as some lingering formatting problems. However, the quality should now be good enough for general public review. Some of the section eight man pages were really supposed to be section one, the package apropros and package help commands are too useless to document, and a few of the difficult-to-name section five man pages have now acquired names.
2005-12-13 19:21:13 +00:00
Authentication Server machines specified when entering interactive mode
apply to all commands issued during the session. They cannot be changed
without leaving the session, except by using the B<kas noauthentication>
command to replace the current authenticated connections with
unauthenticated ones. The B<-admin_username>, B<-password_for_admin>,
B<-cell>, and B<-servers> arguments are ignored if provided on a command
issued during interactive mode.
man-page-conversion-20051208 This is the initial conversion of the AFS Adminstrators Reference into POD for use as man pages. The man pages are now generated via pod2man from regen.sh so that only those working from CVS have to have pod2man available. The Makefile only installs. The pages have also been sorted out into pod1, pod5, and pod8 directories, making conversion to the right section of man page easier without maintaining a separate list and allowing for names to be duplicated between pod5 and pod1 or pod8 (which will likely be needed in a few cases). This reconversion is done with a new script based on work by Chas Williams. In some cases, the output is worse than the previous POD pages, but this is a more comprehensive conversion. This is only the first step, and this initial conversion has various problems. In addition, the file man pages that didn't have simple names have not been converted in this pass and will be added later. Some of the man pages have syntax problems and all of them have formatting errors. The next editing pass, coming shortly, will clean up most of the remaining mess.
2005-12-08 12:14:33 +00:00
=back
To establish an unauthenticated connection to the Authentication Server,
man8-editing-pass-20051213 This completes the initial editing pass of the section eight man pages. Only small amounts of content editing has been done. Some known problems have been noted in README, but there will doubtless be others, as well as some lingering formatting problems. However, the quality should now be good enough for general public review. Some of the section eight man pages were really supposed to be section one, the package apropros and package help commands are too useless to document, and a few of the difficult-to-name section five man pages have now acquired names.
2005-12-13 19:21:13 +00:00
include the B<-noauth> flag or provide an incorrect password. Unless
authorization checking is disabled on each Authentication Server machine
involved, however, it is not possible to perform any privileged operations
within such a session.
man-page-conversion-20051208 This is the initial conversion of the AFS Adminstrators Reference into POD for use as man pages. The man pages are now generated via pod2man from regen.sh so that only those working from CVS have to have pod2man available. The Makefile only installs. The pages have also been sorted out into pod1, pod5, and pod8 directories, making conversion to the right section of man page easier without maintaining a separate list and allowing for names to be duplicated between pod5 and pod1 or pod8 (which will likely be needed in a few cases). This reconversion is done with a new script based on work by Chas Williams. In some cases, the output is worse than the previous POD pages, but this is a more comprehensive conversion. This is only the first step, and this initial conversion has various problems. In addition, the file man pages that didn't have simple names have not been converted in this pass and will be added later. Some of the man pages have syntax problems and all of them have formatting errors. The next editing pass, coming shortly, will clean up most of the remaining mess.
2005-12-08 12:14:33 +00:00
To end the current authenticated connection and establish an
man8-editing-pass-20051213 This completes the initial editing pass of the section eight man pages. Only small amounts of content editing has been done. Some known problems have been noted in README, but there will doubtless be others, as well as some lingering formatting problems. However, the quality should now be good enough for general public review. Some of the section eight man pages were really supposed to be section one, the package apropros and package help commands are too useless to document, and a few of the difficult-to-name section five man pages have now acquired names.
2005-12-13 19:21:13 +00:00
unauthenticated one, issue the B<kas noauthentication> command. To leave
interactive mode and return to the regular shell prompt, issue the B<kas
quit> command.
man-page-conversion-20051208 This is the initial conversion of the AFS Adminstrators Reference into POD for use as man pages. The man pages are now generated via pod2man from regen.sh so that only those working from CVS have to have pod2man available. The Makefile only installs. The pages have also been sorted out into pod1, pod5, and pod8 directories, making conversion to the right section of man page easier without maintaining a separate list and allowing for names to be duplicated between pod5 and pod1 or pod8 (which will likely be needed in a few cases). This reconversion is done with a new script based on work by Chas Williams. In some cases, the output is worse than the previous POD pages, but this is a more comprehensive conversion. This is only the first step, and this initial conversion has various problems. In addition, the file man pages that didn't have simple names have not been converted in this pass and will be added later. Some of the man pages have syntax problems and all of them have formatting errors. The next editing pass, coming shortly, will clean up most of the remaining mess.
2005-12-08 12:14:33 +00:00
=head1 OPTIONS
=over 4
man8-editing-pass-20051213 This completes the initial editing pass of the section eight man pages. Only small amounts of content editing has been done. Some known problems have been noted in README, but there will doubtless be others, as well as some lingering formatting problems. However, the quality should now be good enough for general public review. Some of the section eight man pages were really supposed to be section one, the package apropros and package help commands are too useless to document, and a few of the difficult-to-name section five man pages have now acquired names.
2005-12-13 19:21:13 +00:00
=item B<-admin_username> <I<admin principal>>
man-page-conversion-20051208 This is the initial conversion of the AFS Adminstrators Reference into POD for use as man pages. The man pages are now generated via pod2man from regen.sh so that only those working from CVS have to have pod2man available. The Makefile only installs. The pages have also been sorted out into pod1, pod5, and pod8 directories, making conversion to the right section of man page easier without maintaining a separate list and allowing for names to be duplicated between pod5 and pod1 or pod8 (which will likely be needed in a few cases). This reconversion is done with a new script based on work by Chas Williams. In some cases, the output is worse than the previous POD pages, but this is a more comprehensive conversion. This is only the first step, and this initial conversion has various problems. In addition, the file man pages that didn't have simple names have not been converted in this pass and will be added later. Some of the man pages have syntax problems and all of them have formatting errors. The next editing pass, coming shortly, will clean up most of the remaining mess.
2005-12-08 12:14:33 +00:00
Specifies the user identity under which to authenticate with the
man8-editing-pass-20051213 This completes the initial editing pass of the section eight man pages. Only small amounts of content editing has been done. Some known problems have been noted in README, but there will doubtless be others, as well as some lingering formatting problems. However, the quality should now be good enough for general public review. Some of the section eight man pages were really supposed to be section one, the package apropros and package help commands are too useless to document, and a few of the difficult-to-name section five man pages have now acquired names.
2005-12-13 19:21:13 +00:00
Authentication Server for execution of the command. For more details, see
L<kas(8)>.
man-page-conversion-20051208 This is the initial conversion of the AFS Adminstrators Reference into POD for use as man pages. The man pages are now generated via pod2man from regen.sh so that only those working from CVS have to have pod2man available. The Makefile only installs. The pages have also been sorted out into pod1, pod5, and pod8 directories, making conversion to the right section of man page easier without maintaining a separate list and allowing for names to be duplicated between pod5 and pod1 or pod8 (which will likely be needed in a few cases). This reconversion is done with a new script based on work by Chas Williams. In some cases, the output is worse than the previous POD pages, but this is a more comprehensive conversion. This is only the first step, and this initial conversion has various problems. In addition, the file man pages that didn't have simple names have not been converted in this pass and will be added later. Some of the man pages have syntax problems and all of them have formatting errors. The next editing pass, coming shortly, will clean up most of the remaining mess.
2005-12-08 12:14:33 +00:00
man8-editing-pass-20051213 This completes the initial editing pass of the section eight man pages. Only small amounts of content editing has been done. Some known problems have been noted in README, but there will doubtless be others, as well as some lingering formatting problems. However, the quality should now be good enough for general public review. Some of the section eight man pages were really supposed to be section one, the package apropros and package help commands are too useless to document, and a few of the difficult-to-name section five man pages have now acquired names.
2005-12-13 19:21:13 +00:00
=item B<-password_for_admin> <I<admin password>>
man-page-conversion-20051208 This is the initial conversion of the AFS Adminstrators Reference into POD for use as man pages. The man pages are now generated via pod2man from regen.sh so that only those working from CVS have to have pod2man available. The Makefile only installs. The pages have also been sorted out into pod1, pod5, and pod8 directories, making conversion to the right section of man page easier without maintaining a separate list and allowing for names to be duplicated between pod5 and pod1 or pod8 (which will likely be needed in a few cases). This reconversion is done with a new script based on work by Chas Williams. In some cases, the output is worse than the previous POD pages, but this is a more comprehensive conversion. This is only the first step, and this initial conversion has various problems. In addition, the file man pages that didn't have simple names have not been converted in this pass and will be added later. Some of the man pages have syntax problems and all of them have formatting errors. The next editing pass, coming shortly, will clean up most of the remaining mess.
2005-12-08 12:14:33 +00:00
man8-editing-pass-20051213 This completes the initial editing pass of the section eight man pages. Only small amounts of content editing has been done. Some known problems have been noted in README, but there will doubtless be others, as well as some lingering formatting problems. However, the quality should now be good enough for general public review. Some of the section eight man pages were really supposed to be section one, the package apropros and package help commands are too useless to document, and a few of the difficult-to-name section five man pages have now acquired names.
2005-12-13 19:21:13 +00:00
Specifies the password of the command's issuer. If it is omitted (as
recommended), the B<kas> command interpreter prompts for it and does not
echo it visibly. For more details, see L<kas(8)>.
man-page-conversion-20051208 This is the initial conversion of the AFS Adminstrators Reference into POD for use as man pages. The man pages are now generated via pod2man from regen.sh so that only those working from CVS have to have pod2man available. The Makefile only installs. The pages have also been sorted out into pod1, pod5, and pod8 directories, making conversion to the right section of man page easier without maintaining a separate list and allowing for names to be duplicated between pod5 and pod1 or pod8 (which will likely be needed in a few cases). This reconversion is done with a new script based on work by Chas Williams. In some cases, the output is worse than the previous POD pages, but this is a more comprehensive conversion. This is only the first step, and this initial conversion has various problems. In addition, the file man pages that didn't have simple names have not been converted in this pass and will be added later. Some of the man pages have syntax problems and all of them have formatting errors. The next editing pass, coming shortly, will clean up most of the remaining mess.
2005-12-08 12:14:33 +00:00
man8-editing-pass-20051213 This completes the initial editing pass of the section eight man pages. Only small amounts of content editing has been done. Some known problems have been noted in README, but there will doubtless be others, as well as some lingering formatting problems. However, the quality should now be good enough for general public review. Some of the section eight man pages were really supposed to be section one, the package apropros and package help commands are too useless to document, and a few of the difficult-to-name section five man pages have now acquired names.
2005-12-13 19:21:13 +00:00
=item B<-cell> <I<cell name>>
man-page-conversion-20051208 This is the initial conversion of the AFS Adminstrators Reference into POD for use as man pages. The man pages are now generated via pod2man from regen.sh so that only those working from CVS have to have pod2man available. The Makefile only installs. The pages have also been sorted out into pod1, pod5, and pod8 directories, making conversion to the right section of man page easier without maintaining a separate list and allowing for names to be duplicated between pod5 and pod1 or pod8 (which will likely be needed in a few cases). This reconversion is done with a new script based on work by Chas Williams. In some cases, the output is worse than the previous POD pages, but this is a more comprehensive conversion. This is only the first step, and this initial conversion has various problems. In addition, the file man pages that didn't have simple names have not been converted in this pass and will be added later. Some of the man pages have syntax problems and all of them have formatting errors. The next editing pass, coming shortly, will clean up most of the remaining mess.
2005-12-08 12:14:33 +00:00
Names the cell in which to run the command. For more details, see
man8-editing-pass-20051213 This completes the initial editing pass of the section eight man pages. Only small amounts of content editing has been done. Some known problems have been noted in README, but there will doubtless be others, as well as some lingering formatting problems. However, the quality should now be good enough for general public review. Some of the section eight man pages were really supposed to be section one, the package apropros and package help commands are too useless to document, and a few of the difficult-to-name section five man pages have now acquired names.
2005-12-13 19:21:13 +00:00
L<kas(8)>.
man-page-conversion-20051208 This is the initial conversion of the AFS Adminstrators Reference into POD for use as man pages. The man pages are now generated via pod2man from regen.sh so that only those working from CVS have to have pod2man available. The Makefile only installs. The pages have also been sorted out into pod1, pod5, and pod8 directories, making conversion to the right section of man page easier without maintaining a separate list and allowing for names to be duplicated between pod5 and pod1 or pod8 (which will likely be needed in a few cases). This reconversion is done with a new script based on work by Chas Williams. In some cases, the output is worse than the previous POD pages, but this is a more comprehensive conversion. This is only the first step, and this initial conversion has various problems. In addition, the file man pages that didn't have simple names have not been converted in this pass and will be added later. Some of the man pages have syntax problems and all of them have formatting errors. The next editing pass, coming shortly, will clean up most of the remaining mess.
2005-12-08 12:14:33 +00:00
man8-editing-pass-20051213 This completes the initial editing pass of the section eight man pages. Only small amounts of content editing has been done. Some known problems have been noted in README, but there will doubtless be others, as well as some lingering formatting problems. However, the quality should now be good enough for general public review. Some of the section eight man pages were really supposed to be section one, the package apropros and package help commands are too useless to document, and a few of the difficult-to-name section five man pages have now acquired names.
2005-12-13 19:21:13 +00:00
=item B<-servers> <I<authentication servers>>+
man-page-conversion-20051208 This is the initial conversion of the AFS Adminstrators Reference into POD for use as man pages. The man pages are now generated via pod2man from regen.sh so that only those working from CVS have to have pod2man available. The Makefile only installs. The pages have also been sorted out into pod1, pod5, and pod8 directories, making conversion to the right section of man page easier without maintaining a separate list and allowing for names to be duplicated between pod5 and pod1 or pod8 (which will likely be needed in a few cases). This reconversion is done with a new script based on work by Chas Williams. In some cases, the output is worse than the previous POD pages, but this is a more comprehensive conversion. This is only the first step, and this initial conversion has various problems. In addition, the file man pages that didn't have simple names have not been converted in this pass and will be added later. Some of the man pages have syntax problems and all of them have formatting errors. The next editing pass, coming shortly, will clean up most of the remaining mess.
2005-12-08 12:14:33 +00:00
Names each machine running an Authentication Server with which to
man8-editing-pass-20051213 This completes the initial editing pass of the section eight man pages. Only small amounts of content editing has been done. Some known problems have been noted in README, but there will doubtless be others, as well as some lingering formatting problems. However, the quality should now be good enough for general public review. Some of the section eight man pages were really supposed to be section one, the package apropros and package help commands are too useless to document, and a few of the difficult-to-name section five man pages have now acquired names.
2005-12-13 19:21:13 +00:00
establish a connection. For more details, see L<kas(8)>.
man-page-conversion-20051208 This is the initial conversion of the AFS Adminstrators Reference into POD for use as man pages. The man pages are now generated via pod2man from regen.sh so that only those working from CVS have to have pod2man available. The Makefile only installs. The pages have also been sorted out into pod1, pod5, and pod8 directories, making conversion to the right section of man page easier without maintaining a separate list and allowing for names to be duplicated between pod5 and pod1 or pod8 (which will likely be needed in a few cases). This reconversion is done with a new script based on work by Chas Williams. In some cases, the output is worse than the previous POD pages, but this is a more comprehensive conversion. This is only the first step, and this initial conversion has various problems. In addition, the file man pages that didn't have simple names have not been converted in this pass and will be added later. Some of the man pages have syntax problems and all of them have formatting errors. The next editing pass, coming shortly, will clean up most of the remaining mess.
2005-12-08 12:14:33 +00:00
man8-editing-pass-20051213 This completes the initial editing pass of the section eight man pages. Only small amounts of content editing has been done. Some known problems have been noted in README, but there will doubtless be others, as well as some lingering formatting problems. However, the quality should now be good enough for general public review. Some of the section eight man pages were really supposed to be section one, the package apropros and package help commands are too useless to document, and a few of the difficult-to-name section five man pages have now acquired names.
2005-12-13 19:21:13 +00:00
=item B<-noauth>
man-page-conversion-20051208 This is the initial conversion of the AFS Adminstrators Reference into POD for use as man pages. The man pages are now generated via pod2man from regen.sh so that only those working from CVS have to have pod2man available. The Makefile only installs. The pages have also been sorted out into pod1, pod5, and pod8 directories, making conversion to the right section of man page easier without maintaining a separate list and allowing for names to be duplicated between pod5 and pod1 or pod8 (which will likely be needed in a few cases). This reconversion is done with a new script based on work by Chas Williams. In some cases, the output is worse than the previous POD pages, but this is a more comprehensive conversion. This is only the first step, and this initial conversion has various problems. In addition, the file man pages that didn't have simple names have not been converted in this pass and will be added later. Some of the man pages have syntax problems and all of them have formatting errors. The next editing pass, coming shortly, will clean up most of the remaining mess.
2005-12-08 12:14:33 +00:00
man8-editing-pass-20051213 This completes the initial editing pass of the section eight man pages. Only small amounts of content editing has been done. Some known problems have been noted in README, but there will doubtless be others, as well as some lingering formatting problems. However, the quality should now be good enough for general public review. Some of the section eight man pages were really supposed to be section one, the package apropros and package help commands are too useless to document, and a few of the difficult-to-name section five man pages have now acquired names.
2005-12-13 19:21:13 +00:00
Assigns the unprivileged identity C<anonymous> to the issuer. For more
details, see L<kas(8)>.
man-page-conversion-20051208 This is the initial conversion of the AFS Adminstrators Reference into POD for use as man pages. The man pages are now generated via pod2man from regen.sh so that only those working from CVS have to have pod2man available. The Makefile only installs. The pages have also been sorted out into pod1, pod5, and pod8 directories, making conversion to the right section of man page easier without maintaining a separate list and allowing for names to be duplicated between pod5 and pod1 or pod8 (which will likely be needed in a few cases). This reconversion is done with a new script based on work by Chas Williams. In some cases, the output is worse than the previous POD pages, but this is a more comprehensive conversion. This is only the first step, and this initial conversion has various problems. In addition, the file man pages that didn't have simple names have not been converted in this pass and will be added later. Some of the man pages have syntax problems and all of them have formatting errors. The next editing pass, coming shortly, will clean up most of the remaining mess.
2005-12-08 12:14:33 +00:00
man8-editing-pass-20051213 This completes the initial editing pass of the section eight man pages. Only small amounts of content editing has been done. Some known problems have been noted in README, but there will doubtless be others, as well as some lingering formatting problems. However, the quality should now be good enough for general public review. Some of the section eight man pages were really supposed to be section one, the package apropros and package help commands are too useless to document, and a few of the difficult-to-name section five man pages have now acquired names.
2005-12-13 19:21:13 +00:00
=item B<-help>
man-page-conversion-20051208 This is the initial conversion of the AFS Adminstrators Reference into POD for use as man pages. The man pages are now generated via pod2man from regen.sh so that only those working from CVS have to have pod2man available. The Makefile only installs. The pages have also been sorted out into pod1, pod5, and pod8 directories, making conversion to the right section of man page easier without maintaining a separate list and allowing for names to be duplicated between pod5 and pod1 or pod8 (which will likely be needed in a few cases). This reconversion is done with a new script based on work by Chas Williams. In some cases, the output is worse than the previous POD pages, but this is a more comprehensive conversion. This is only the first step, and this initial conversion has various problems. In addition, the file man pages that didn't have simple names have not been converted in this pass and will be added later. Some of the man pages have syntax problems and all of them have formatting errors. The next editing pass, coming shortly, will clean up most of the remaining mess.
2005-12-08 12:14:33 +00:00
man8-editing-pass-20051213 This completes the initial editing pass of the section eight man pages. Only small amounts of content editing has been done. Some known problems have been noted in README, but there will doubtless be others, as well as some lingering formatting problems. However, the quality should now be good enough for general public review. Some of the section eight man pages were really supposed to be section one, the package apropros and package help commands are too useless to document, and a few of the difficult-to-name section five man pages have now acquired names.
2005-12-13 19:21:13 +00:00
Prints the online help for this command. All other valid options are
ignored.
man-page-conversion-20051208 This is the initial conversion of the AFS Adminstrators Reference into POD for use as man pages. The man pages are now generated via pod2man from regen.sh so that only those working from CVS have to have pod2man available. The Makefile only installs. The pages have also been sorted out into pod1, pod5, and pod8 directories, making conversion to the right section of man page easier without maintaining a separate list and allowing for names to be duplicated between pod5 and pod1 or pod8 (which will likely be needed in a few cases). This reconversion is done with a new script based on work by Chas Williams. In some cases, the output is worse than the previous POD pages, but this is a more comprehensive conversion. This is only the first step, and this initial conversion has various problems. In addition, the file man pages that didn't have simple names have not been converted in this pass and will be added later. Some of the man pages have syntax problems and all of them have formatting errors. The next editing pass, coming shortly, will clean up most of the remaining mess.
2005-12-08 12:14:33 +00:00
=back
=head1 EXAMPLES
The following example shows a user entering interactive mode as the
man8-editing-pass-20051213 This completes the initial editing pass of the section eight man pages. Only small amounts of content editing has been done. Some known problems have been noted in README, but there will doubtless be others, as well as some lingering formatting problems. However, the quality should now be good enough for general public review. Some of the section eight man pages were really supposed to be section one, the package apropros and package help commands are too useless to document, and a few of the difficult-to-name section five man pages have now acquired names.
2005-12-13 19:21:13 +00:00
privileged user C<admin>.
man-page-conversion-20051208 This is the initial conversion of the AFS Adminstrators Reference into POD for use as man pages. The man pages are now generated via pod2man from regen.sh so that only those working from CVS have to have pod2man available. The Makefile only installs. The pages have also been sorted out into pod1, pod5, and pod8 directories, making conversion to the right section of man page easier without maintaining a separate list and allowing for names to be duplicated between pod5 and pod1 or pod8 (which will likely be needed in a few cases). This reconversion is done with a new script based on work by Chas Williams. In some cases, the output is worse than the previous POD pages, but this is a more comprehensive conversion. This is only the first step, and this initial conversion has various problems. In addition, the file man pages that didn't have simple names have not been converted in this pass and will be added later. Some of the man pages have syntax problems and all of them have formatting errors. The next editing pass, coming shortly, will clean up most of the remaining mess.
2005-12-08 12:14:33 +00:00
% kas interactive admin
Password for admin: I<admin_password>
ka>
=head1 PRIVILEGE REQUIRED
None
=head1 SEE ALSO
man8-editing-pass-20051213 This completes the initial editing pass of the section eight man pages. Only small amounts of content editing has been done. Some known problems have been noted in README, but there will doubtless be others, as well as some lingering formatting problems. However, the quality should now be good enough for general public review. Some of the section eight man pages were really supposed to be section one, the package apropros and package help commands are too useless to document, and a few of the difficult-to-name section five man pages have now acquired names.
2005-12-13 19:21:13 +00:00
L<kas(8)>,
L<kas_noauthentication(8)>,
L<kas_quit(8)>
man-page-conversion-20051208 This is the initial conversion of the AFS Adminstrators Reference into POD for use as man pages. The man pages are now generated via pod2man from regen.sh so that only those working from CVS have to have pod2man available. The Makefile only installs. The pages have also been sorted out into pod1, pod5, and pod8 directories, making conversion to the right section of man page easier without maintaining a separate list and allowing for names to be duplicated between pod5 and pod1 or pod8 (which will likely be needed in a few cases). This reconversion is done with a new script based on work by Chas Williams. In some cases, the output is worse than the previous POD pages, but this is a more comprehensive conversion. This is only the first step, and this initial conversion has various problems. In addition, the file man pages that didn't have simple names have not been converted in this pass and will be added later. Some of the man pages have syntax problems and all of them have formatting errors. The next editing pass, coming shortly, will clean up most of the remaining mess.
2005-12-08 12:14:33 +00:00
=head1 COPYRIGHT
IBM Corporation 2000. <http://www.ibm.com/> All Rights Reserved.
This documentation is covered by the IBM Public License Version 1.0. It was
converted from HTML to POD by software written by Chas Williams and Russ
Allbery, based on work by Alf Wachsmann and Elizabeth Cassell.
Reference in New Issue Copy Permalink