jimzah/openafs
1
0
Fork 0
mirror of https://git.openafs.org/openafs.git synced 2025-01-19 07:20:11 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
b5935d47fb
openafs/doc/man-pages/pod8/bos_setcellname.pod

135 lines
4.1 KiB
Plaintext
Raw Normal View History

man-page-conversion-20051208 This is the initial conversion of the AFS Adminstrators Reference into POD for use as man pages. The man pages are now generated via pod2man from regen.sh so that only those working from CVS have to have pod2man available. The Makefile only installs. The pages have also been sorted out into pod1, pod5, and pod8 directories, making conversion to the right section of man page easier without maintaining a separate list and allowing for names to be duplicated between pod5 and pod1 or pod8 (which will likely be needed in a few cases). This reconversion is done with a new script based on work by Chas Williams. In some cases, the output is worse than the previous POD pages, but this is a more comprehensive conversion. This is only the first step, and this initial conversion has various problems. In addition, the file man pages that didn't have simple names have not been converted in this pass and will be added later. Some of the man pages have syntax problems and all of them have formatting errors. The next editing pass, coming shortly, will clean up most of the remaining mess.
2005-12-08 12:14:33 +00:00
=head1 NAME
man8-editing-pass-20051213 This completes the initial editing pass of the section eight man pages. Only small amounts of content editing has been done. Some known problems have been noted in README, but there will doubtless be others, as well as some lingering formatting problems. However, the quality should now be good enough for general public review. Some of the section eight man pages were really supposed to be section one, the package apropros and package help commands are too useless to document, and a few of the difficult-to-name section five man pages have now acquired names.
2005-12-13 19:21:13 +00:00
bos setcellname - Sets the cell's name in ThisCell and CellServDB
man-page-conversion-20051208 This is the initial conversion of the AFS Adminstrators Reference into POD for use as man pages. The man pages are now generated via pod2man from regen.sh so that only those working from CVS have to have pod2man available. The Makefile only installs. The pages have also been sorted out into pod1, pod5, and pod8 directories, making conversion to the right section of man page easier without maintaining a separate list and allowing for names to be duplicated between pod5 and pod1 or pod8 (which will likely be needed in a few cases). This reconversion is done with a new script based on work by Chas Williams. In some cases, the output is worse than the previous POD pages, but this is a more comprehensive conversion. This is only the first step, and this initial conversion has various problems. In addition, the file man pages that didn't have simple names have not been converted in this pass and will be added later. Some of the man pages have syntax problems and all of them have formatting errors. The next editing pass, coming shortly, will clean up most of the remaining mess.
2005-12-08 12:14:33 +00:00
=head1 SYNOPSIS
pretty-html-synopsis-20060228 Implement proper synopsis wrapping for HTML generation. This was done in three pieces. First, add HTML-specific tags to the POD to mark the synopsis for HTML purposes so that we can apply style information to it. Second, update the style sheet to indent all lines except for the first in the synopsis section. Third, add the appropriate S<> tags around option and argument pairs so that we don't wrap between the option and its argument. Unfortunately, due to the <I<foo>> style that looks nicer for other reasons, we have to use the very verbose S<<< >>>. Oh well.
2006-03-01 05:02:29 +00:00
=for html
<div class="synopsis">
man-page-conversion-20051208 This is the initial conversion of the AFS Adminstrators Reference into POD for use as man pages. The man pages are now generated via pod2man from regen.sh so that only those working from CVS have to have pod2man available. The Makefile only installs. The pages have also been sorted out into pod1, pod5, and pod8 directories, making conversion to the right section of man page easier without maintaining a separate list and allowing for names to be duplicated between pod5 and pod1 or pod8 (which will likely be needed in a few cases). This reconversion is done with a new script based on work by Chas Williams. In some cases, the output is worse than the previous POD pages, but this is a more comprehensive conversion. This is only the first step, and this initial conversion has various problems. In addition, the file man pages that didn't have simple names have not been converted in this pass and will be added later. Some of the man pages have syntax problems and all of them have formatting errors. The next editing pass, coming shortly, will clean up most of the remaining mess.
2005-12-08 12:14:33 +00:00
pretty-html-synopsis-20060228 Implement proper synopsis wrapping for HTML generation. This was done in three pieces. First, add HTML-specific tags to the POD to mark the synopsis for HTML purposes so that we can apply style information to it. Second, update the style sheet to indent all lines except for the first in the synopsis section. Third, add the appropriate S<> tags around option and argument pairs so that we don't wrap between the option and its argument. Unfortunately, due to the <I<foo>> style that looks nicer for other reasons, we have to use the very verbose S<<< >>>. Oh well.
2006-03-01 05:02:29 +00:00
B<bos setcellname> S<<< B<-server> <I<machine name>> >>> S<<< B<-name> <I<cell name>> >>>
S<<< [B<-cell> <I<cell name>>] >>> [B<-noauth>] [B<-localauth>] [B<-help>]
B<bos setc> S<<< B<-s> <I<machine name>> >>> S<<< B<-n> <I<cell name>> >>>
S<<< [B<-c> <I<cell name>>] >>> [B<-n>] [B<-l>] [-h]
=for html
</div>
man-page-conversion-20051208 This is the initial conversion of the AFS Adminstrators Reference into POD for use as man pages. The man pages are now generated via pod2man from regen.sh so that only those working from CVS have to have pod2man available. The Makefile only installs. The pages have also been sorted out into pod1, pod5, and pod8 directories, making conversion to the right section of man page easier without maintaining a separate list and allowing for names to be duplicated between pod5 and pod1 or pod8 (which will likely be needed in a few cases). This reconversion is done with a new script based on work by Chas Williams. In some cases, the output is worse than the previous POD pages, but this is a more comprehensive conversion. This is only the first step, and this initial conversion has various problems. In addition, the file man pages that didn't have simple names have not been converted in this pass and will be added later. Some of the man pages have syntax problems and all of them have formatting errors. The next editing pass, coming shortly, will clean up most of the remaining mess.
2005-12-08 12:14:33 +00:00
=head1 DESCRIPTION
man8-editing-pass-20051213 This completes the initial editing pass of the section eight man pages. Only small amounts of content editing has been done. Some known problems have been noted in README, but there will doubtless be others, as well as some lingering formatting problems. However, the quality should now be good enough for general public review. Some of the section eight man pages were really supposed to be section one, the package apropros and package help commands are too useless to document, and a few of the difficult-to-name section five man pages have now acquired names.
2005-12-13 19:21:13 +00:00
The B<bos setcellname> command establishes the cell's name and makes the
server machine named by the B<-server> argument a member of it, by
recording the value of the B<-name> argument in two files which it creates
on the local disk:
man-page-conversion-20051208 This is the initial conversion of the AFS Adminstrators Reference into POD for use as man pages. The man pages are now generated via pod2man from regen.sh so that only those working from CVS have to have pod2man available. The Makefile only installs. The pages have also been sorted out into pod1, pod5, and pod8 directories, making conversion to the right section of man page easier without maintaining a separate list and allowing for names to be duplicated between pod5 and pod1 or pod8 (which will likely be needed in a few cases). This reconversion is done with a new script based on work by Chas Williams. In some cases, the output is worse than the previous POD pages, but this is a more comprehensive conversion. This is only the first step, and this initial conversion has various problems. In addition, the file man pages that didn't have simple names have not been converted in this pass and will be added later. Some of the man pages have syntax problems and all of them have formatting errors. The next editing pass, coming shortly, will clean up most of the remaining mess.
2005-12-08 12:14:33 +00:00
=over 4
=item *
man8-editing-pass-20051213 This completes the initial editing pass of the section eight man pages. Only small amounts of content editing has been done. Some known problems have been noted in README, but there will doubtless be others, as well as some lingering formatting problems. However, the quality should now be good enough for general public review. Some of the section eight man pages were really supposed to be section one, the package apropros and package help commands are too useless to document, and a few of the difficult-to-name section five man pages have now acquired names.
2005-12-13 19:21:13 +00:00
F</usr/afs/etc/ThisCell>
man-page-conversion-20051208 This is the initial conversion of the AFS Adminstrators Reference into POD for use as man pages. The man pages are now generated via pod2man from regen.sh so that only those working from CVS have to have pod2man available. The Makefile only installs. The pages have also been sorted out into pod1, pod5, and pod8 directories, making conversion to the right section of man page easier without maintaining a separate list and allowing for names to be duplicated between pod5 and pod1 or pod8 (which will likely be needed in a few cases). This reconversion is done with a new script based on work by Chas Williams. In some cases, the output is worse than the previous POD pages, but this is a more comprehensive conversion. This is only the first step, and this initial conversion has various problems. In addition, the file man pages that didn't have simple names have not been converted in this pass and will be added later. Some of the man pages have syntax problems and all of them have formatting errors. The next editing pass, coming shortly, will clean up most of the remaining mess.
2005-12-08 12:14:33 +00:00
=item *
man8-editing-pass-20051213 This completes the initial editing pass of the section eight man pages. Only small amounts of content editing has been done. Some known problems have been noted in README, but there will doubtless be others, as well as some lingering formatting problems. However, the quality should now be good enough for general public review. Some of the section eight man pages were really supposed to be section one, the package apropros and package help commands are too useless to document, and a few of the difficult-to-name section five man pages have now acquired names.
2005-12-13 19:21:13 +00:00
F</usr/afs/etc/CellServDB>. The cell name appears on the first line in the
file, preceded by the required C<< > >> symbol. The machine name
specified with the B<-server> argument appears on the second line along
with its IP address as obtained from the cell's naming service. The
machine is thus designated as the cell's first database server machine.
man-page-conversion-20051208 This is the initial conversion of the AFS Adminstrators Reference into POD for use as man pages. The man pages are now generated via pod2man from regen.sh so that only those working from CVS have to have pod2man available. The Makefile only installs. The pages have also been sorted out into pod1, pod5, and pod8 directories, making conversion to the right section of man page easier without maintaining a separate list and allowing for names to be duplicated between pod5 and pod1 or pod8 (which will likely be needed in a few cases). This reconversion is done with a new script based on work by Chas Williams. In some cases, the output is worse than the previous POD pages, but this is a more comprehensive conversion. This is only the first step, and this initial conversion has various problems. In addition, the file man pages that didn't have simple names have not been converted in this pass and will be added later. Some of the man pages have syntax problems and all of them have formatting errors. The next editing pass, coming shortly, will clean up most of the remaining mess.
2005-12-08 12:14:33 +00:00
=back
man1-editing-pass-20051209 Complete an initial editing and cleanup pass for all section one man pages. Fix various conversion problems, formatting inconsistencies, and obvious problems. Please note that no editing for content has yet been done; this is solely editing for formatting and correct conversion to POD. Also, add some additional section five man pages that were omitted from the first conversion run due to unusual file names, and globally replace CAVEATS with CAUTIONS in the man pages to match the original section name. The section one man pages should now be in reasonable shape and ready for additional review and further updates, although there are probably still remaining obvious problems. ==================== This delta was composed from multiple commits as part of the CVS->Git migration. The checkin message with each commit was inconsistent. The following are the additional commit messages. ==================== This file got the wrong name when it was originally committed. Fix.
2005-12-09 14:48:56 +00:00
=head1 CAUTIONS
man-page-conversion-20051208 This is the initial conversion of the AFS Adminstrators Reference into POD for use as man pages. The man pages are now generated via pod2man from regen.sh so that only those working from CVS have to have pod2man available. The Makefile only installs. The pages have also been sorted out into pod1, pod5, and pod8 directories, making conversion to the right section of man page easier without maintaining a separate list and allowing for names to be duplicated between pod5 and pod1 or pod8 (which will likely be needed in a few cases). This reconversion is done with a new script based on work by Chas Williams. In some cases, the output is worse than the previous POD pages, but this is a more comprehensive conversion. This is only the first step, and this initial conversion has various problems. In addition, the file man pages that didn't have simple names have not been converted in this pass and will be added later. Some of the man pages have syntax problems and all of them have formatting errors. The next editing pass, coming shortly, will clean up most of the remaining mess.
2005-12-08 12:14:33 +00:00
man8-editing-pass-20051213 This completes the initial editing pass of the section eight man pages. Only small amounts of content editing has been done. Some known problems have been noted in README, but there will doubtless be others, as well as some lingering formatting problems. However, the quality should now be good enough for general public review. Some of the section eight man pages were really supposed to be section one, the package apropros and package help commands are too useless to document, and a few of the difficult-to-name section five man pages have now acquired names.
2005-12-13 19:21:13 +00:00
Issue this command only when the installing the cell's first AFS server
machine. The I<IBM AFS Quick Beginnings> explains how to copy over the
F<ThisCell> and F<CellServDB> files from this or another appropriate
machine during installation of additional server machines.
man-page-conversion-20051208 This is the initial conversion of the AFS Adminstrators Reference into POD for use as man pages. The man pages are now generated via pod2man from regen.sh so that only those working from CVS have to have pod2man available. The Makefile only installs. The pages have also been sorted out into pod1, pod5, and pod8 directories, making conversion to the right section of man page easier without maintaining a separate list and allowing for names to be duplicated between pod5 and pod1 or pod8 (which will likely be needed in a few cases). This reconversion is done with a new script based on work by Chas Williams. In some cases, the output is worse than the previous POD pages, but this is a more comprehensive conversion. This is only the first step, and this initial conversion has various problems. In addition, the file man pages that didn't have simple names have not been converted in this pass and will be added later. Some of the man pages have syntax problems and all of them have formatting errors. The next editing pass, coming shortly, will clean up most of the remaining mess.
2005-12-08 12:14:33 +00:00
Be sure to choose a satisfactory cell name when issuing this command,
man8-editing-pass-20051213 This completes the initial editing pass of the section eight man pages. Only small amounts of content editing has been done. Some known problems have been noted in README, but there will doubtless be others, as well as some lingering formatting problems. However, the quality should now be good enough for general public review. Some of the section eight man pages were really supposed to be section one, the package apropros and package help commands are too useless to document, and a few of the difficult-to-name section five man pages have now acquired names.
2005-12-13 19:21:13 +00:00
because changing a cell's name is very complicated; for one thing, it
requires changing every password in the Authentication Database. Consult
the I<IBM AFS Administration Guide> for advice on choosing a cell name.
man-page-conversion-20051208 This is the initial conversion of the AFS Adminstrators Reference into POD for use as man pages. The man pages are now generated via pod2man from regen.sh so that only those working from CVS have to have pod2man available. The Makefile only installs. The pages have also been sorted out into pod1, pod5, and pod8 directories, making conversion to the right section of man page easier without maintaining a separate list and allowing for names to be duplicated between pod5 and pod1 or pod8 (which will likely be needed in a few cases). This reconversion is done with a new script based on work by Chas Williams. In some cases, the output is worse than the previous POD pages, but this is a more comprehensive conversion. This is only the first step, and this initial conversion has various problems. In addition, the file man pages that didn't have simple names have not been converted in this pass and will be added later. Some of the man pages have syntax problems and all of them have formatting errors. The next editing pass, coming shortly, will clean up most of the remaining mess.
2005-12-08 12:14:33 +00:00
=head1 OPTIONS
=over 4
man8-editing-pass-20051213 This completes the initial editing pass of the section eight man pages. Only small amounts of content editing has been done. Some known problems have been noted in README, but there will doubtless be others, as well as some lingering formatting problems. However, the quality should now be good enough for general public review. Some of the section eight man pages were really supposed to be section one, the package apropros and package help commands are too useless to document, and a few of the difficult-to-name section five man pages have now acquired names.
2005-12-13 19:21:13 +00:00
=item B<-server> <I<machine name>>
man-page-conversion-20051208 This is the initial conversion of the AFS Adminstrators Reference into POD for use as man pages. The man pages are now generated via pod2man from regen.sh so that only those working from CVS have to have pod2man available. The Makefile only installs. The pages have also been sorted out into pod1, pod5, and pod8 directories, making conversion to the right section of man page easier without maintaining a separate list and allowing for names to be duplicated between pod5 and pod1 or pod8 (which will likely be needed in a few cases). This reconversion is done with a new script based on work by Chas Williams. In some cases, the output is worse than the previous POD pages, but this is a more comprehensive conversion. This is only the first step, and this initial conversion has various problems. In addition, the file man pages that didn't have simple names have not been converted in this pass and will be added later. Some of the man pages have syntax problems and all of them have formatting errors. The next editing pass, coming shortly, will clean up most of the remaining mess.
2005-12-08 12:14:33 +00:00
Indicates the server machine on which to set the cell name in the
man8-editing-pass-20051213 This completes the initial editing pass of the section eight man pages. Only small amounts of content editing has been done. Some known problems have been noted in README, but there will doubtless be others, as well as some lingering formatting problems. However, the quality should now be good enough for general public review. Some of the section eight man pages were really supposed to be section one, the package apropros and package help commands are too useless to document, and a few of the difficult-to-name section five man pages have now acquired names.
2005-12-13 19:21:13 +00:00
F<ThisCell> and F<CellServDB> file. It is always the first machine
installed in a cell. Identify the machine by IP address or its host name
(either fully-qualified or abbreviated unambiguously). For details, see
L<bos(8)>.
man-page-conversion-20051208 This is the initial conversion of the AFS Adminstrators Reference into POD for use as man pages. The man pages are now generated via pod2man from regen.sh so that only those working from CVS have to have pod2man available. The Makefile only installs. The pages have also been sorted out into pod1, pod5, and pod8 directories, making conversion to the right section of man page easier without maintaining a separate list and allowing for names to be duplicated between pod5 and pod1 or pod8 (which will likely be needed in a few cases). This reconversion is done with a new script based on work by Chas Williams. In some cases, the output is worse than the previous POD pages, but this is a more comprehensive conversion. This is only the first step, and this initial conversion has various problems. In addition, the file man pages that didn't have simple names have not been converted in this pass and will be added later. Some of the man pages have syntax problems and all of them have formatting errors. The next editing pass, coming shortly, will clean up most of the remaining mess.
2005-12-08 12:14:33 +00:00
man8-editing-pass-20051213 This completes the initial editing pass of the section eight man pages. Only small amounts of content editing has been done. Some known problems have been noted in README, but there will doubtless be others, as well as some lingering formatting problems. However, the quality should now be good enough for general public review. Some of the section eight man pages were really supposed to be section one, the package apropros and package help commands are too useless to document, and a few of the difficult-to-name section five man pages have now acquired names.
2005-12-13 19:21:13 +00:00
=item B<-name> <I<cell name>>
man-page-conversion-20051208 This is the initial conversion of the AFS Adminstrators Reference into POD for use as man pages. The man pages are now generated via pod2man from regen.sh so that only those working from CVS have to have pod2man available. The Makefile only installs. The pages have also been sorted out into pod1, pod5, and pod8 directories, making conversion to the right section of man page easier without maintaining a separate list and allowing for names to be duplicated between pod5 and pod1 or pod8 (which will likely be needed in a few cases). This reconversion is done with a new script based on work by Chas Williams. In some cases, the output is worse than the previous POD pages, but this is a more comprehensive conversion. This is only the first step, and this initial conversion has various problems. In addition, the file man pages that didn't have simple names have not been converted in this pass and will be added later. Some of the man pages have syntax problems and all of them have formatting errors. The next editing pass, coming shortly, will clean up most of the remaining mess.
2005-12-08 12:14:33 +00:00
Defines the cell name, using standard Internet domain name format (the
man8-editing-pass-20051213 This completes the initial editing pass of the section eight man pages. Only small amounts of content editing has been done. Some known problems have been noted in README, but there will doubtless be others, as well as some lingering formatting problems. However, the quality should now be good enough for general public review. Some of the section eight man pages were really supposed to be section one, the package apropros and package help commands are too useless to document, and a few of the difficult-to-name section five man pages have now acquired names.
2005-12-13 19:21:13 +00:00
actual domain name is usually appropriate). Examples are C<abc.com> for
the ABC Corporation and C<stateu.edu> for the State University. It must
match the value of the B<-cell> argument, if that is provided.
man-page-conversion-20051208 This is the initial conversion of the AFS Adminstrators Reference into POD for use as man pages. The man pages are now generated via pod2man from regen.sh so that only those working from CVS have to have pod2man available. The Makefile only installs. The pages have also been sorted out into pod1, pod5, and pod8 directories, making conversion to the right section of man page easier without maintaining a separate list and allowing for names to be duplicated between pod5 and pod1 or pod8 (which will likely be needed in a few cases). This reconversion is done with a new script based on work by Chas Williams. In some cases, the output is worse than the previous POD pages, but this is a more comprehensive conversion. This is only the first step, and this initial conversion has various problems. In addition, the file man pages that didn't have simple names have not been converted in this pass and will be added later. Some of the man pages have syntax problems and all of them have formatting errors. The next editing pass, coming shortly, will clean up most of the remaining mess.
2005-12-08 12:14:33 +00:00
man8-editing-pass-20051213 This completes the initial editing pass of the section eight man pages. Only small amounts of content editing has been done. Some known problems have been noted in README, but there will doubtless be others, as well as some lingering formatting problems. However, the quality should now be good enough for general public review. Some of the section eight man pages were really supposed to be section one, the package apropros and package help commands are too useless to document, and a few of the difficult-to-name section five man pages have now acquired names.
2005-12-13 19:21:13 +00:00
=item B<-cell> <I<cell name>>
man-page-conversion-20051208 This is the initial conversion of the AFS Adminstrators Reference into POD for use as man pages. The man pages are now generated via pod2man from regen.sh so that only those working from CVS have to have pod2man available. The Makefile only installs. The pages have also been sorted out into pod1, pod5, and pod8 directories, making conversion to the right section of man page easier without maintaining a separate list and allowing for names to be duplicated between pod5 and pod1 or pod8 (which will likely be needed in a few cases). This reconversion is done with a new script based on work by Chas Williams. In some cases, the output is worse than the previous POD pages, but this is a more comprehensive conversion. This is only the first step, and this initial conversion has various problems. In addition, the file man pages that didn't have simple names have not been converted in this pass and will be added later. Some of the man pages have syntax problems and all of them have formatting errors. The next editing pass, coming shortly, will clean up most of the remaining mess.
2005-12-08 12:14:33 +00:00
man8-editing-pass-20051213 This completes the initial editing pass of the section eight man pages. Only small amounts of content editing has been done. Some known problems have been noted in README, but there will doubtless be others, as well as some lingering formatting problems. However, the quality should now be good enough for general public review. Some of the section eight man pages were really supposed to be section one, the package apropros and package help commands are too useless to document, and a few of the difficult-to-name section five man pages have now acquired names.
2005-12-13 19:21:13 +00:00
Names the cell in which to run the command. Do not combine this argument
with the B<-localauth> flag. For more details, see L<bos(8)>.
man-page-conversion-20051208 This is the initial conversion of the AFS Adminstrators Reference into POD for use as man pages. The man pages are now generated via pod2man from regen.sh so that only those working from CVS have to have pod2man available. The Makefile only installs. The pages have also been sorted out into pod1, pod5, and pod8 directories, making conversion to the right section of man page easier without maintaining a separate list and allowing for names to be duplicated between pod5 and pod1 or pod8 (which will likely be needed in a few cases). This reconversion is done with a new script based on work by Chas Williams. In some cases, the output is worse than the previous POD pages, but this is a more comprehensive conversion. This is only the first step, and this initial conversion has various problems. In addition, the file man pages that didn't have simple names have not been converted in this pass and will be added later. Some of the man pages have syntax problems and all of them have formatting errors. The next editing pass, coming shortly, will clean up most of the remaining mess.
2005-12-08 12:14:33 +00:00
man8-editing-pass-20051213 This completes the initial editing pass of the section eight man pages. Only small amounts of content editing has been done. Some known problems have been noted in README, but there will doubtless be others, as well as some lingering formatting problems. However, the quality should now be good enough for general public review. Some of the section eight man pages were really supposed to be section one, the package apropros and package help commands are too useless to document, and a few of the difficult-to-name section five man pages have now acquired names.
2005-12-13 19:21:13 +00:00
=item B<-noauth>
man-page-conversion-20051208 This is the initial conversion of the AFS Adminstrators Reference into POD for use as man pages. The man pages are now generated via pod2man from regen.sh so that only those working from CVS have to have pod2man available. The Makefile only installs. The pages have also been sorted out into pod1, pod5, and pod8 directories, making conversion to the right section of man page easier without maintaining a separate list and allowing for names to be duplicated between pod5 and pod1 or pod8 (which will likely be needed in a few cases). This reconversion is done with a new script based on work by Chas Williams. In some cases, the output is worse than the previous POD pages, but this is a more comprehensive conversion. This is only the first step, and this initial conversion has various problems. In addition, the file man pages that didn't have simple names have not been converted in this pass and will be added later. Some of the man pages have syntax problems and all of them have formatting errors. The next editing pass, coming shortly, will clean up most of the remaining mess.
2005-12-08 12:14:33 +00:00
man8-editing-pass-20051213 This completes the initial editing pass of the section eight man pages. Only small amounts of content editing has been done. Some known problems have been noted in README, but there will doubtless be others, as well as some lingering formatting problems. However, the quality should now be good enough for general public review. Some of the section eight man pages were really supposed to be section one, the package apropros and package help commands are too useless to document, and a few of the difficult-to-name section five man pages have now acquired names.
2005-12-13 19:21:13 +00:00
Assigns the unprivileged identity C<anonymous> to the issuer. Do not
combine this flag with the B<-localauth> flag. For more details, see
L<bos(8)>.
man-page-conversion-20051208 This is the initial conversion of the AFS Adminstrators Reference into POD for use as man pages. The man pages are now generated via pod2man from regen.sh so that only those working from CVS have to have pod2man available. The Makefile only installs. The pages have also been sorted out into pod1, pod5, and pod8 directories, making conversion to the right section of man page easier without maintaining a separate list and allowing for names to be duplicated between pod5 and pod1 or pod8 (which will likely be needed in a few cases). This reconversion is done with a new script based on work by Chas Williams. In some cases, the output is worse than the previous POD pages, but this is a more comprehensive conversion. This is only the first step, and this initial conversion has various problems. In addition, the file man pages that didn't have simple names have not been converted in this pass and will be added later. Some of the man pages have syntax problems and all of them have formatting errors. The next editing pass, coming shortly, will clean up most of the remaining mess.
2005-12-08 12:14:33 +00:00
man8-editing-pass-20051213 This completes the initial editing pass of the section eight man pages. Only small amounts of content editing has been done. Some known problems have been noted in README, but there will doubtless be others, as well as some lingering formatting problems. However, the quality should now be good enough for general public review. Some of the section eight man pages were really supposed to be section one, the package apropros and package help commands are too useless to document, and a few of the difficult-to-name section five man pages have now acquired names.
2005-12-13 19:21:13 +00:00
=item B<-localauth>
man-page-conversion-20051208 This is the initial conversion of the AFS Adminstrators Reference into POD for use as man pages. The man pages are now generated via pod2man from regen.sh so that only those working from CVS have to have pod2man available. The Makefile only installs. The pages have also been sorted out into pod1, pod5, and pod8 directories, making conversion to the right section of man page easier without maintaining a separate list and allowing for names to be duplicated between pod5 and pod1 or pod8 (which will likely be needed in a few cases). This reconversion is done with a new script based on work by Chas Williams. In some cases, the output is worse than the previous POD pages, but this is a more comprehensive conversion. This is only the first step, and this initial conversion has various problems. In addition, the file man pages that didn't have simple names have not been converted in this pass and will be added later. Some of the man pages have syntax problems and all of them have formatting errors. The next editing pass, coming shortly, will clean up most of the remaining mess.
2005-12-08 12:14:33 +00:00
Constructs a server ticket using a key from the local
man8-editing-pass-20051213 This completes the initial editing pass of the section eight man pages. Only small amounts of content editing has been done. Some known problems have been noted in README, but there will doubtless be others, as well as some lingering formatting problems. However, the quality should now be good enough for general public review. Some of the section eight man pages were really supposed to be section one, the package apropros and package help commands are too useless to document, and a few of the difficult-to-name section five man pages have now acquired names.
2005-12-13 19:21:13 +00:00
F</usr/afs/etc/KeyFile> file. The B<bos> command interpreter presents the
ticket to the BOS Server during mutual authentication. Do not combine this
flag with the B<-cell> or B<-noauth> options. For more details, see
L<bos(8)>.
man-page-conversion-20051208 This is the initial conversion of the AFS Adminstrators Reference into POD for use as man pages. The man pages are now generated via pod2man from regen.sh so that only those working from CVS have to have pod2man available. The Makefile only installs. The pages have also been sorted out into pod1, pod5, and pod8 directories, making conversion to the right section of man page easier without maintaining a separate list and allowing for names to be duplicated between pod5 and pod1 or pod8 (which will likely be needed in a few cases). This reconversion is done with a new script based on work by Chas Williams. In some cases, the output is worse than the previous POD pages, but this is a more comprehensive conversion. This is only the first step, and this initial conversion has various problems. In addition, the file man pages that didn't have simple names have not been converted in this pass and will be added later. Some of the man pages have syntax problems and all of them have formatting errors. The next editing pass, coming shortly, will clean up most of the remaining mess.
2005-12-08 12:14:33 +00:00
man8-editing-pass-20051213 This completes the initial editing pass of the section eight man pages. Only small amounts of content editing has been done. Some known problems have been noted in README, but there will doubtless be others, as well as some lingering formatting problems. However, the quality should now be good enough for general public review. Some of the section eight man pages were really supposed to be section one, the package apropros and package help commands are too useless to document, and a few of the difficult-to-name section five man pages have now acquired names.
2005-12-13 19:21:13 +00:00
=item B<-help>
man-page-conversion-20051208 This is the initial conversion of the AFS Adminstrators Reference into POD for use as man pages. The man pages are now generated via pod2man from regen.sh so that only those working from CVS have to have pod2man available. The Makefile only installs. The pages have also been sorted out into pod1, pod5, and pod8 directories, making conversion to the right section of man page easier without maintaining a separate list and allowing for names to be duplicated between pod5 and pod1 or pod8 (which will likely be needed in a few cases). This reconversion is done with a new script based on work by Chas Williams. In some cases, the output is worse than the previous POD pages, but this is a more comprehensive conversion. This is only the first step, and this initial conversion has various problems. In addition, the file man pages that didn't have simple names have not been converted in this pass and will be added later. Some of the man pages have syntax problems and all of them have formatting errors. The next editing pass, coming shortly, will clean up most of the remaining mess.
2005-12-08 12:14:33 +00:00
man8-editing-pass-20051213 This completes the initial editing pass of the section eight man pages. Only small amounts of content editing has been done. Some known problems have been noted in README, but there will doubtless be others, as well as some lingering formatting problems. However, the quality should now be good enough for general public review. Some of the section eight man pages were really supposed to be section one, the package apropros and package help commands are too useless to document, and a few of the difficult-to-name section five man pages have now acquired names.
2005-12-13 19:21:13 +00:00
Prints the online help for this command. All other valid options are
ignored.
man-page-conversion-20051208 This is the initial conversion of the AFS Adminstrators Reference into POD for use as man pages. The man pages are now generated via pod2man from regen.sh so that only those working from CVS have to have pod2man available. The Makefile only installs. The pages have also been sorted out into pod1, pod5, and pod8 directories, making conversion to the right section of man page easier without maintaining a separate list and allowing for names to be duplicated between pod5 and pod1 or pod8 (which will likely be needed in a few cases). This reconversion is done with a new script based on work by Chas Williams. In some cases, the output is worse than the previous POD pages, but this is a more comprehensive conversion. This is only the first step, and this initial conversion has various problems. In addition, the file man pages that didn't have simple names have not been converted in this pass and will be added later. Some of the man pages have syntax problems and all of them have formatting errors. The next editing pass, coming shortly, will clean up most of the remaining mess.
2005-12-08 12:14:33 +00:00
=back
=head1 EXAMPLES
man8-editing-pass-20051213 This completes the initial editing pass of the section eight man pages. Only small amounts of content editing has been done. Some known problems have been noted in README, but there will doubtless be others, as well as some lingering formatting problems. However, the quality should now be good enough for general public review. Some of the section eight man pages were really supposed to be section one, the package apropros and package help commands are too useless to document, and a few of the difficult-to-name section five man pages have now acquired names.
2005-12-13 19:21:13 +00:00
The following command defines the cell name C<abc.com> in the F<ThisCell>
and F<CellServDB> files on the machine C<fs1.abc.com> as it is installed
as the cell's first server machine.
man-page-conversion-20051208 This is the initial conversion of the AFS Adminstrators Reference into POD for use as man pages. The man pages are now generated via pod2man from regen.sh so that only those working from CVS have to have pod2man available. The Makefile only installs. The pages have also been sorted out into pod1, pod5, and pod8 directories, making conversion to the right section of man page easier without maintaining a separate list and allowing for names to be duplicated between pod5 and pod1 or pod8 (which will likely be needed in a few cases). This reconversion is done with a new script based on work by Chas Williams. In some cases, the output is worse than the previous POD pages, but this is a more comprehensive conversion. This is only the first step, and this initial conversion has various problems. In addition, the file man pages that didn't have simple names have not been converted in this pass and will be added later. Some of the man pages have syntax problems and all of them have formatting errors. The next editing pass, coming shortly, will clean up most of the remaining mess.
2005-12-08 12:14:33 +00:00
% bos setcellname -server fs1.abc.com -name abc.com
=head1 PRIVILEGE REQUIRED
man8-editing-pass-20051213 This completes the initial editing pass of the section eight man pages. Only small amounts of content editing has been done. Some known problems have been noted in README, but there will doubtless be others, as well as some lingering formatting problems. However, the quality should now be good enough for general public review. Some of the section eight man pages were really supposed to be section one, the package apropros and package help commands are too useless to document, and a few of the difficult-to-name section five man pages have now acquired names.
2005-12-13 19:21:13 +00:00
Authorization checking is normally turned off during installation, which
is the only recommended time to use this command; in this case no
privilege is required. If authorization checking is turned on, the issuer
must be listed in the F</usr/afs/etc/UserList> file on the machine named
by the B<-server> argument, or must be logged in as the local superuser
C<root> if the B<-localauth> flag is included.
man-page-conversion-20051208 This is the initial conversion of the AFS Adminstrators Reference into POD for use as man pages. The man pages are now generated via pod2man from regen.sh so that only those working from CVS have to have pod2man available. The Makefile only installs. The pages have also been sorted out into pod1, pod5, and pod8 directories, making conversion to the right section of man page easier without maintaining a separate list and allowing for names to be duplicated between pod5 and pod1 or pod8 (which will likely be needed in a few cases). This reconversion is done with a new script based on work by Chas Williams. In some cases, the output is worse than the previous POD pages, but this is a more comprehensive conversion. This is only the first step, and this initial conversion has various problems. In addition, the file man pages that didn't have simple names have not been converted in this pass and will be added later. Some of the man pages have syntax problems and all of them have formatting errors. The next editing pass, coming shortly, will clean up most of the remaining mess.
2005-12-08 12:14:33 +00:00
=head1 SEE ALSO
man8-editing-pass-20051213 This completes the initial editing pass of the section eight man pages. Only small amounts of content editing has been done. Some known problems have been noted in README, but there will doubtless be others, as well as some lingering formatting problems. However, the quality should now be good enough for general public review. Some of the section eight man pages were really supposed to be section one, the package apropros and package help commands are too useless to document, and a few of the difficult-to-name section five man pages have now acquired names.
2005-12-13 19:21:13 +00:00
L<CellServDB(5)>,
L<KeyFile(5)>,
L<ThisCell(5)>,
L<UserList(5)>,
L<bos(8)>
man-page-conversion-20051208 This is the initial conversion of the AFS Adminstrators Reference into POD for use as man pages. The man pages are now generated via pod2man from regen.sh so that only those working from CVS have to have pod2man available. The Makefile only installs. The pages have also been sorted out into pod1, pod5, and pod8 directories, making conversion to the right section of man page easier without maintaining a separate list and allowing for names to be duplicated between pod5 and pod1 or pod8 (which will likely be needed in a few cases). This reconversion is done with a new script based on work by Chas Williams. In some cases, the output is worse than the previous POD pages, but this is a more comprehensive conversion. This is only the first step, and this initial conversion has various problems. In addition, the file man pages that didn't have simple names have not been converted in this pass and will be added later. Some of the man pages have syntax problems and all of them have formatting errors. The next editing pass, coming shortly, will clean up most of the remaining mess.
2005-12-08 12:14:33 +00:00
I<IBM AFS Quick Beginnings>
I<IBM AFS Administration Guide>
=head1 COPYRIGHT
IBM Corporation 2000. <http://www.ibm.com/> All Rights Reserved.
This documentation is covered by the IBM Public License Version 1.0. It was
converted from HTML to POD by software written by Chas Williams and Russ
Allbery, based on work by Alf Wachsmann and Elizabeth Cassell.
Reference in New Issue Copy Permalink