Commit 5afe7a882b added a configure
option to disable the installation of the kauth suite, but did not
add any logic to disable the installation of the corresponding man
pages, so those man pages were always installed regardless of the
options to configure.
Add logic to doc/man-pages/Makefile.in to create .noinstall files
for man pages which should not be installed in the current configuration.
Depend on the Makefile (which will be regenerated by configure) in
this target so as to attempt to behave properly if configure is re-run
with different arguments in the same working tree.
Change-Id: I19b77a9f20fe27c49db14f3e800d8c77cda1bb3a
Reviewed-on: http://gerrit.openafs.org/10993
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: D Brashear <shadow@your-file-system.com>
Avoid using -noauth, and mention both the rxkad.keytab (1.6)
and the KeyFileExt (as 1.8, though it's only master at present).
To support these, move forward the use of kadmin to extract
the afs/cell principal's keytab.
Move the buserver's creation to the end of the list and mark it
as optional (many sites do not run the AFS backup suite).
Deindent some programlisting blocks so they don't flow off the
page as much in the PDF version.
Drop vos syncserv and vos syncvldb from the tasks for setting
up a new server; they should not be needed, as the new db server
should pick up the existing database when it joins the quorum.
General edits for clarity, whitespace and such.
Change-Id: I951ec3ee237e4c83a17c82802328f0a454b61097
Reviewed-on: http://gerrit.openafs.org/11581
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: D Brashear <shadow@your-file-system.com>
Don't talk about tarball distributions; we shouldn't be
doing those anymore. Also switch away from 'make dest'.
Change-Id: If0badacab4b3c2492e90867328153f83da82bfc1
Reviewed-on: http://gerrit.openafs.org/11580
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: D Brashear <shadow@your-file-system.com>
As an alternative to rpm-based systems or "systems packaged as
tar files". Luckily, the instructions are pretty simple.
Change-Id: I8045763b518465c3ffd7fe3f177fff98146033fb
Reviewed-on: http://gerrit.openafs.org/11579
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: D Brashear <shadow@your-file-system.com>
It's not the recommended way to push updates anymore,
and clutters up the guide.
Change-Id: I248380f12609a2ca03f47602773dc08f230b6fbe
Reviewed-on: http://gerrit.openafs.org/11578
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: D Brashear <shadow@your-file-system.com>
The instructions are clearer when we just tell people what
to do, and we think that dafs should be right for almost
everyone. Mention that the traditional fileserver is an
option and where to read about it, but nothing more.
Change-Id: I1fccceb8ee2bf2ec1e5afb0f5b034f029ee96c61
Reviewed-on: http://gerrit.openafs.org/11577
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: D Brashear <shadow@your-file-system.com>
Put the ones most likely to be relevant at the top, instead
of sorting alphabetically.
Change-Id: I6ad80ee2a30b7192d8c8e4668234fa1789e1a213
Reviewed-on: http://gerrit.openafs.org/11576
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: D Brashear <shadow@your-file-system.com>
IRIX is mostly gone as an upstream. The case for removing this
is less clear than the case for removing the HP-UX docs, but
it still feels like clutter in this document.
Change-Id: Ib7e9bfc8f7ae8e08e9f12b70d5df615496f57bb6
Reviewed-on: http://gerrit.openafs.org/11575
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: D Brashear <shadow@your-file-system.com>
We don't really support HP-UX anymore; no need to clutter up
the documentation with it.
Change-Id: Ib75f4f137c3cfcb5ab2aece3746964f1cfbab051
Reviewed-on: http://gerrit.openafs.org/11574
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: D Brashear <shadow@your-file-system.com>
Bump copyright and, uh, major version for the "in progress" note...
Change-Id: I5edd235864138b82c84dc1c1218f849217efad1e
Reviewed-on: http://gerrit.openafs.org/11573
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: D Brashear <shadow@your-file-system.com>
Briefly document the vldb version 4 file format. Describe the vl
header, the vl entry, and mh extensions.
Thanks to Marcio Barbosa for an initial draft, comments, and review.
Thanks to Ben Kaduk the prdb.txt, and for an initial review and comments.
Change-Id: If3ca85419027a218b7bb1585f5d5cd4763ad5b26
Reviewed-on: http://gerrit.openafs.org/11564
Reviewed-by: Nathaniel Filardo <nwfilardo@gmail.com>
Reviewed-by: D Brashear <shadow@your-file-system.com>
Tested-by: D Brashear <shadow@your-file-system.com>
This tool was removed in 2006 in commit
b405868ca0. Also remove mention of
wsadmin, removed at the same time.
Change-Id: I8475b951f576f10ddd2f4b72565354b9fba41d94
Reviewed-on: http://gerrit.openafs.org/11554
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: D Brashear <shadow@your-file-system.com>
It has been unused since the LWP fileserver was removed.
It was used to set the LWP stack size.
Change-Id: I2ffd3a2f02049a307b668a46b62b31dc9bc128a8
Reviewed-on: http://gerrit.openafs.org/11527
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil>
Reviewed-by: D Brashear <shadow@your-file-system.com>
These are new files and new content; fix the copyright notice and
license to reflect.
Change-Id: I8d5f00fb7edaf2e3855e2dc2a1af07bba471c0d6
Reviewed-on: http://gerrit.openafs.org/11362
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Tested-by: Jeffrey Altman <jaltman@your-file-system.com>
Add an optional make target (make dox) and doxygen configuration to
generate doxygen output files. Auto-detect when the doxygen and
graphviz dot tools are available. When dot is present, configure
doxygen to create dependency graphs.
Since the graph generation can take a very long time, a new
configure option has been added to override the dot tool
auto-detection. To disable the graph generation (even if dot is
installed), run configure with the option: --without-dot
When graph generation is desired, but graphviz dot is not present in
the PATH, specify the path to dot with the configure option
--with-dot=<path-to-dot>.
The configure summary has been updated to show when doxygen document
and graph generation is configured.
Thank you Jason Edgecombe for providing the doxygen configuration
for OpenAFS.
Change-Id: Ie875fc2961877ee76e4c17631bbb95c29ef20b9e
Reviewed-on: http://gerrit.openafs.org/10970
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: D Brashear <shadow@your-file-system.com>
Add a new vos release option called -force-reclone to force the
reclone of the release clone and a release to all of the remote
sites, regardless of the state of the VLDB flags on the remote
sites, but does not force full volume dumps when distributing the
volume.
Provide an alias -f for -force for compatibility with the original
IBM vos, in case scripts were written to use the old '-f' option,
and for users with muscle memory.
Change-Id: I0ebebc5e8099299781e8da57579d91848bb2ad19
Reviewed-on: http://gerrit.openafs.org/9020
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Reviewed-by: D Brashear <shadow@your-file-system.com>
Make vlserver and volserver suppport a new command line parameter,
"-restricted_query admin". When this is on, the query RPCs that
are not needed for normal cache manager operations are restricted
to administrators listed in UserList. This is off by default.
Change-Id: I2a23a4e99cabd46b19ed491a6520773731a5994e
Reviewed-on: http://gerrit.openafs.org/10927
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil>
Reviewed-by: D Brashear <shadow@your-file-system.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
It is not always clear to users whether BosConfig.new is noticed
during an automatic restart, or if it requires stopping and starting
the bosserver. Slightly reword the relevant text and add a small note
that a "general restart" does cause BosConfig.new to be noticed, so
this is explicitly clear.
Change-Id: Iab3eaff176305b0b2991a6636e70204b5072b1b0
Reviewed-on: http://gerrit.openafs.org/11076
Reviewed-by: Andrew Deason <adeason@sinenomine.net>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
vos convertROtoRW leaves the older RW copy on the original fileserver,
although it is no longer in the VLDB. Provide the user with some hints
regarding clean up.
Change-Id: I5f6fcf7d5a516b59438d84e60f163a567d3a64fd
Reviewed-on: http://gerrit.openafs.org/9408
Reviewed-by: Ken Dreyer <ktdreyer@ktdreyer.com>
Tested-by: Ken Dreyer <ktdreyer@ktdreyer.com>
Currently, one could simply query from 0 to 'pts listmax' to determine
all the usernames in a cell. The -restrict_anonymous option will block
access to almost all of the unauthenticated RPC's. PR_NameToID is still
open since aklog still needs access to this RPC. An "attack" against
this RPC would have to scan a much larger key space to determine valid
usernames in a cell.
Change-Id: I7e475bc004f08d28d195c199804befa89f0ceb0c
Reviewed-on: http://gerrit.openafs.org/10951
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Gergely Risko <gergely@risko.hu>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Reviewed-by: D Brashear <shadow@your-file-system.com>
Commit 070230ab76 added documentation of
the mode parameter to bos setrestricted, claiming that the value 0 is
useless, and commit eee0bf5871 added
documentation of the restrictmode entry in BosConfig, claiming that it
can only be set back to 0 with an editor. Both claims are wrong, since
bos setrestricted -mode 0 will do exactly that (if it succeeds, which
it only can if the server is running in unrestricted mode, which can
be achieved by sending it the FPE signal). Fix the man pages
accordingly.
Change-Id: I07b75f7d0cea2e247fa4f346121de258e35119f5
Reviewed-on: http://gerrit.openafs.org/10885
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Reviewed-by: Marc Dionne <marc.c.dionne@gmail.com>
Reviewed-by: Andrew Deason <adeason@sinenomine.net>
Reviewed-by: Michael Meffie <mmeffie@sinenomine.net>
Reviewed-by: D Brashear <shadow@your-file-system.com>
Provide a man page for the volscan utility
Change-Id: Ibaecb2b9030ee71d81f13b897694c4cf3b4b9516
Reviewed-on: http://gerrit.openafs.org/10905
Reviewed-by: D Brashear <shadow@your-file-system.com>
Tested-by: D Brashear <shadow@your-file-system.com>
Mention the restrictmode entry and the commands for setting and
querying it in the BosConfig man page, and add/fix cross references
between the BosConfig, bos, bos_getrestricted and bos_setrestricted
ones.
Change-Id: I938ef4c43c1a248335f09975c454b36f7570782c
Reviewed-on: http://gerrit.openafs.org/10874
Reviewed-by: Ken Dreyer <ktdreyer@ktdreyer.com>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Tested-by: Jeffrey Altman <jaltman@your-file-system.com>
Add the -emit option to the compile_et command to support parallel make.
The -emit option allows make to generate the header and the source files
independently, instead of building two files at the some time. This
avoids the issue where one command creates two separate files, which is
difficult to handle correctly for parallel makes.
Change-Id: Ib44a8e358643cf19b4834b3bd4d5b88db6cd0ccf
Reviewed-on: http://gerrit.openafs.org/7921
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Marc Dionne <marc.c.dionne@gmail.com>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
The man page documented the prefix option as -prefix; compile_et
supported only the short form -p.
Document and support both the long and short forms for the prefix
option; -p and -prefix.
Change-Id: Ide5551b06ae888748600677ed09ba674506a584f
Reviewed-on: http://gerrit.openafs.org/10721
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Document the -lang short form for -language.
Change-Id: I4a57bdb23ca5fab4e1565d7e930cdc10097a7414
Reviewed-on: http://gerrit.openafs.org/10720
Reviewed-by: Ken Dreyer <ktdreyer@ktdreyer.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Fix two pod formatting errors and remove one trailing
whitespace characters.
Change-Id: I2ba4fd56afb8c26591d2770301c3edfdd1a898fb
Reviewed-on: http://gerrit.openafs.org/10719
Reviewed-by: Ken Dreyer <ktdreyer@ktdreyer.com>
Tested-by: Ken Dreyer <ktdreyer@ktdreyer.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Fix typo in the dropbox section where 'l' was referred
to as 'read', not 'lookup'.
Change-Id: I6429c125f0561a1b5d4e7816930988ac1b347be7
Reviewed-on: http://gerrit.openafs.org/10750
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Ken Dreyer <ktdreyer@ktdreyer.com>
- Consistently specify -dryrun and -n across various subcommands.
Many did not list -n, some listed -n but no -dryrun, and some
listed -noexecute instead.
- backup_volrestore: Add missing option -usedump
- backup_deletedump: Add missing options -groupid, -dbonly, -force,
and -portoffset
Change-Id: Iec1c36cba0ad0e61d7e6215c9cba81228b95a81f
Reviewed-on: http://gerrit.openafs.org/10441
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Add the 'checkman' script, which compares a command's "-help" output
to the options actually documented in its manpage. This command is
certainly not perfect, and may contain false negatives and false
positives. It is not (currently) intended to be run as an automated
check, but is meant to assist a human manually checking the
correctness of man pages. An error reported by 'checkman' does not
necessarily indicate something that should actually be changed.
Change-Id: Iae1965c441279dd3f93c1a7283ea0a0140d5ebe3
Reviewed-on: http://gerrit.openafs.org/10442
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
This option is completely useless since the LWP volserver was removed.
Remove the code for it.
Change-Id: I2257ba2ecd2ffeb9c47d21cbb516d6a0abb19b94
Reviewed-on: http://gerrit.openafs.org/10424
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
For every fssync-debug subcommand, provide a symlink for the
associated dafssync-debug subcommand. This way, running e.g.
"man dafssync-debug_attach" will actually give you a manpage, instead
of needing to specifically run "man fssync-debug_attach".
Change-Id: I83d71dc14f9f838d9a9900fcc62817677898dd27
Reviewed-on: http://gerrit.openafs.org/10412
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: Derrick Brashear <shadow@your-file-system.com>
If we indent text here, the formatting codes are not interpreted, and
the text is output "raw". So currently, we actually see
"I<system_type>" in this section, which is a bit confusing.
Saying the actual output with string substitutions and stuff here
doesn't seem very helpful when the output doesn't have any constant
text in it. Just describe what the output is instead; an example
immediately follows if this is unclear.
Change-Id: Ib3e0f0c5143afa2dd41a655ff3908c791026a426
Reviewed-on: http://gerrit.openafs.org/10411
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: Derrick Brashear <shadow@your-file-system.com>
We now have a -checkout option, but no -online option. Document
-checkout and remove -online.
Change-Id: Ie8d6e35c6e09abf994b8417b3bb20ee379095a25
Reviewed-on: http://gerrit.openafs.org/10407
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
- Add missing option -fix
- Don't use brackets in the option list; we don't do this in most
other manpages.
Change-Id: Ifd87dd749aaab2987b2f9c3224b8e931b7bc221c
Reviewed-on: http://gerrit.openafs.org/10403
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Many manpages for "vos" subcommands were not using the "common" vos
fragments, and instead were just repeating the information directly in
their manpage. Make them all use the "common" vos fragment to avoid
duplication.
Change-Id: I62d84a1164b4ba46082e33a6d27fd24e3722014c
Reviewed-on: http://gerrit.openafs.org/10398
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
- Add missing -config option to 'common' vos options, and to the
synopsis for all commands
- Remove brackets in the options descriptions for vos_shadow,
vos_create, and vos_clone. We don't do this in other manpages.
- vos_create: Add missing -id, -roid to synopsis
- vos_clone: Add missing -readwrite option
- vos_shadow: Add missing -toid option
Change-Id: I41fd56509e78116698c82a2f3f4fd07f26cdc95f
Reviewed-on: http://gerrit.openafs.org/10397
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
- fs_whichcell: Fix formatting typo
- fs_setcbaddr: Change -host to -addr
- Add missing -help to fs_setcbaddr and fs_rxstatproc
- fs_getfid: Add missing -literal to synopsis
- fs_exportafs: List on/off options in single =item. Doing this in
two separate consecutive =items confuses the manpage generator.
- fs_exportafs: Add missing -clipags and -pagcb
Change-Id: I4e986543292f1000fc00456fde486d7da573c9c3
Reviewed-on: http://gerrit.openafs.org/10396
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Fix -noauth documentation. The current documentation is referring to
the client-side -noauth option, but this is actually the server-side
-noauth option, which is very different.
Change-Id: I65154aef4734e69bb0f3ae485baacac11a718488
Reviewed-on: http://gerrit.openafs.org/10401
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
- Indent synopsis formatting
- Add missing options -trace, -noauth, -smallmem, -rxmaxmtu,
and -syslog
- Fix some formatting typos in the synopsis
- Document the -db alias by putting it next to the -database option,
separated by a pipe "|"
Change-Id: I4c84baf53d346cb47416cb2843e8b7de2437d147
vlserver: -database option
Change-Id: I7f5539aeebee71441a3901a183033fac05fa411f
Reviewed-on: http://gerrit.openafs.org/10400
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
- Indent synopsis formatting
- Document the -db and -depth aliases by putting them next
to -database and -groupdeth (respectively) separated by a pipe "|"
Change-Id: Ic40fa0001feee293afe6c22ade7b85dc46fde938
Reviewed-on: http://gerrit.openafs.org/10399
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: Derrick Brashear <shadow@your-file-system.com>
- Fix synopsis formatting, so option arguments are on the same line
as the option name
- Add missing options -rxmaxmtu, -rxbind, -syslog, and -sleep
Change-Id: I6e6f06d716e7f78be288bfebde97a3701f086924
Reviewed-on: http://gerrit.openafs.org/10394
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
- Add missing -rxbind
- Add missing -crossrealm
- Fix synopsis formatting, so option arguments are on the same line
as the option name
Change-Id: I8c73d0f14396aad83651c3037fde1137d83e6692
Reviewed-on: http://gerrit.openafs.org/10392
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: Derrick Brashear <shadow@your-file-system.com>
- Add missing -ubikbuffers
- Remove -enable_peer_stats and -enable_process_stats; we don't
actually accept these options
- Fix synopsis formatting, so option arguments are on the same line
as the option name
- Fix the -noauth documentation. The current text is referring to the
client-side -noauth option, but this is actually the server-side
-noauth option, which is very different.
Change-Id: I11e557e54a8539627ae7bb79cb7af3e8fbc77d25
Reviewed-on: http://gerrit.openafs.org/10389
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
The formatting gets screwed up if we have multiple =item tags together
like this. To just have each one be a bullet point, just have a bare
=item before each one, without a "tag" or "key" for the =item.
Change-Id: I5cb7a98bd16f5999d529a42a0f822835f6d2f66e
Reviewed-on: http://gerrit.openafs.org/10388
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
- Mention the -help, -auth, -encrypt, and -config options for all pts
commands in their synopsis
- Add the -auth option to the pts.pod page
- Reference the -auth, -encrypt, and -config options from all
subcommand pts pages
- pts_removeuser: Replace -name with -user
- pts_sleep: Add missing -delay
- pts_source: Add missing -file
Change-Id: I4f0889d661c46f6bdd2a9604d8423d809a632d2d
Reviewed-on: http://gerrit.openafs.org/10387
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
The man pages previously described linking DCE cells to AFS cells.
OpenAFS and YFS also allow linking between two AFS cells. Update the
description of linked cells in CellServDB(5), aklog(1), and
fs_newcell(1) to refer to AFS instead of DCE.
Add a linked cell example to the CellServDB man page with an
explanation.
Change-Id: Ic9b1c643861b7307c09fcc5a1775f4abf4cb4155
Reviewed-on: http://gerrit.openafs.org/10342
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
The syntax is a little confusing, so an example is needed to clarify it.
Change-Id: I413a5f2af6ccf48e780007c658c35a34384d09e0
Reviewed-on: http://gerrit.openafs.org/10281
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Reviewed-by: Michael Meffie <mmeffie@sinenomine.net>
Reviewed-by: Mark Vitale <mvitale@sinenomine.net>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
State upfront that klog and klog.krb (v4) are obsolete.
Update the klog.krb description and remove some redundant
text.
Change-Id: I6ede8084aebbd49c5a27aa427ef9782d99a347aa
Reviewed-on: http://gerrit.openafs.org/10270
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Also add the usage for the six-argument form while here.
Update some generic text to account for the existence of rxkad-k5,
and mention that the Update Server is not the only thing which can copy
around KeyFiles. Give an example of the seven-argument form's usage for
rxkad-k5.
Increase the maximum LWP threads allowed from 16 to 64. Increasing the number
of LWP threads can reduce the number of calls waiting for threads.
Change-Id: I66f53c0fbb2db66c94b9982e3ee6b3b1f89a0f01
Reviewed-on: http://gerrit.openafs.org/9707
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: Derrick Brashear <shadow@your-file-system.com>
Increase the maximum LWP threads allowed from 16 to 64. Increasing the number
of LWP threads can reduce the number of calls waiting for threads on
busy vlservers.
Change-Id: I1e95366aad8fe4d275794603d2af07c799cd7048
Reviewed-on: http://gerrit.openafs.org/9706
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Briefly cover the ubik header and mention that it is not part of the
logical database (since it is just used for the consistency procedure).
Describe the fields of the prheader and how they are used. Mention that
all subsequent entries are blocks of the same size, whose type can be
distinguished by a shared flags field. User and group entries are similar,
and supergroup entries are described as a diff from regular group entries,
as only a handful of fields change. Continuation entries can be used
for user, regular group, or supergroup entries.
Call out what fields are invariant within which classes of entry, so that
these properties can be preserved (or knowingly eliminated) for future
extensions to the format.
Change-Id: Id5ca7d8d346c09c2eec50691e5c5fefbe735ac60
Reviewed-on: http://gerrit.openafs.org/10022
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Allow an alternate location to be specified for the logfile.
Change-Id: I55a05576746e115478a8e48df22f4fdb26634f05
Reviewed-on: http://gerrit.openafs.org/9831
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Add options to the fileserver to specify alternate locations for
the log file and the config. This will be useful for testing
purposes.
Change-Id: I3550bd993fe5fd2cd9b90425962c95cb1c7d98ea
Reviewed-on: http://gerrit.openafs.org/9830
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Add options to specify alternate locations for the configuration
files and the log file. This will be helpful for testing.
Change-Id: I4169bc1944719773155931860c6a6dd2fd672f53
Reviewed-on: http://gerrit.openafs.org/9828
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Fix a few errors in the vlserver manpage, a typo in a word and a
few missing delimiters that mess up the formatting slightly.
Change-Id: I1ec9887dfcbfd4f2a38c0a15fe7760d99682a194
Reviewed-on: http://gerrit.openafs.org/9804
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Andrew Deason <adeason@sinenomine.net>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Recent versions of Pod::Simple complain if we use integers or other
special characters in an =item list. We have a couple bulleted lists
that happen to have integers or other special characters as the list
values. Quote the items with C<> so that Pod::Simple can correctly parse
them again.
Change-Id: If456781fe219b73ae01feb9aef2fb2639e097534
Reviewed-on: http://gerrit.openafs.org/9838
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Tested-by: Jeffrey Altman <jaltman@your-file-system.com>
The actual behavior of FDH_SYNC has changed a bit over the years, and
some people want one behavior, and some want another. Make it possible
to make this choice at runtime with the new -sync option, instead of
making this decision by running with different patches.
Note that FDH_SYNC is not a macro anymore, nor is it an inline
function. While it could be a macro, it would look a bit complex, and
there are some oddities with trying to use vol_io_params inside the
FDH_SYNC expansion (vol_io_params is not declared for LWP, for
example). And having it be an inline function causes problems with
some odd linking dependencies. For example, vlib.a contains volume.o,
but does not contain a definition for DFlushVolume (dir/buffer.c),
which is referenced in volume.o. 'vos' uses vlib.a, but does not
bring in anything that defines DFlushVolume. Currently this appears to
not cause a problem because 'vos' uses nothing from volume.o, so the
dependencies of volume.o don't matter. Adding an inline FDH_SYNC for
platforms that don't support 'static inline' would add a dependency to
volume.o (via vol_io_params), which causes an error for the lack of a
DFlushVolume.
Those are possibly just some problems, and may not be all. So instead,
make it so we don't have to deal with that and just have a normal
function. While FDH_SYNC may be called in a performance-critical
section, the overhead of a real function call is nowhere near the
delay of an actual fsync(), so presumably any overhead doesn't matter.
Change-Id: I23620bd8ac31b9019e9d55cb46ec9f3a75f5675c
Reviewed-on: http://gerrit.openafs.org/9694
Reviewed-by: Andrew Deason <adeason@sinenomine.net>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Windows 7 Explorer Shell has a bug when processing drive letters
mapped to UNC paths whose target volume information specifies the
FILE_READ_ONLY_VOLUME flag. When set, not only is the .readonly
volume treated as read only but all volumes that can be accessed via the
drive letter. This bug is fixed in Windows 8.
Add a registry configuration option to permit configuration of the
behavior. Sites that do not use drive letter mappings will want to
enable it even on Windows 7 because it permits the Explorer Shell
to disable the "Delete" and "Rename" options and others when the current
directory is read only.
The default is disabled on Win7 and below; enabled on Win8 and above.
Change-Id: I73bbaf7d40918650b1a217ed44409c0679920536
Reviewed-on: http://gerrit.openafs.org/9606
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Tested-by: Jeffrey Altman <jaltman@your-file-system.com>
This patchset implements and enables by default the new
Direct IO pathway between the AFS redirector and the afsd_service.exe.
When Direct IO is enabled all reads and writes are performed by the
AFS redirector locking memory allocated by the kernel and mapping it into
the service's memory address space.
The service supports cache bypass in this mode when the
AFS_REQUEST_FLAG_CACHE_BYPASS flag is set in the request from the
redirector. When cache bypass is active, the AFSCache file is ignored and
data is either directly fetched from or stored to the file server. Cache
bypass is enabled by IIS and other applications that request no
intermediate buffering when opening file handles. This is often done
because the application implements its own data caching. All cache bypass
store operations are synchronous.
When cache bypass is not enabled, the memory region provided by the AFS
redirector is either used to populate the cm_buf_t objects or is populated
by them. When cache bypass is not enabled, one outstanding store
operation can be in flight asynchronously to improve performance.
Direct IO is enabled by default and can be disabled by creating the
registry value.
..\Services\TransarcAFSDaemon\Parameters
"DirectIO" DWORD 0x0
Change-Id: I3cac3660c8b8eded58226ba4a819692c454704a8
Reviewed-on: http://gerrit.openafs.org/9211
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
the real name of the command is: 'bos setrestricted'
it is sufficient to name 'bos install' only once
Change-Id: Ic68f7cb55466e1c92c34eeda37c0a64a11b7e4d8
Reviewed-on: http://gerrit.openafs.org/8990
Reviewed-by: Ken Dreyer <ktdreyer@ktdreyer.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Implement the fs flushall command on the unix cache manager to flush
all volume data. Uses a new common pioctl code point VIOC_FLUSHALL (14),
registered with the grand.central.org assigned numbers.
Change-Id: I214d8c762573b308d79fa7122a91d48ddd403eb9
Reviewed-on: http://gerrit.openafs.org/7540
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Fix the trailing whitespace and leading spaces
before tabs in the readme files.
Change-Id: If20e528ddb28f82e4d3d1b1f03dec8670f914afc
Reviewed-on: http://gerrit.openafs.org/8877
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Michael Meffie <mmeffie@sinenomine.net>
Reviewed-by: Ken Dreyer <ktdreyer@ktdreyer.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
The URL of the openafs wiki doesn't contain "AFSLore" anymore. Although
these old URLs still work, replace them to point users to the correct
address in the first place. Also be consistent and always use a
trailing /.
Change-Id: I9d22694249c47331b4a5cd4f02f8815742c4b86f
Reviewed-on: http://gerrit.openafs.org/8819
Reviewed-by: Ken Dreyer <ktdreyer@ktdreyer.com>
Reviewed-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil>
Tested-by: Jeffrey Altman <jaltman@your-file-system.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Change the 'vos shadow' man page to say that updating the
VLDB with shadow volumes does only work if the VLDB entries
for the corresponding source volumes are deleted first.
Change-Id: I2764776b7a03346b5b2809f796d1deed0c32933b
Reviewed-on: http://gerrit.openafs.org/8652
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Dan van der Ster <daniel.vanderster@cern.ch>
Tested-by: Dan van der Ster <daniel.vanderster@cern.ch>
Reviewed-by: Ken Dreyer <ktdreyer@ktdreyer.com>
For Solaris 11, the module goes in drv, not fs.
Change-Id: Ib297239b845977eaf7e4cdb3edaba32db6733e12
Reviewed-on: http://gerrit.openafs.org/8152
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Ken Dreyer <ktdreyer@ktdreyer.com>
Use kindlegen located by the configure stage and test for
kindlegen and dbtoepub before building in all cases.
Change-Id: Ieb46023ddf0725a2c93f96e29f942b71343d53dd
Reviewed-on: http://gerrit.openafs.org/8148
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Reviewed-by: Ken Dreyer <ktdreyer@ktdreyer.com>
In appendix C in the QSG, we give an example 'bos create'. The given
-cmd arguments should have quotes, or they will be interpreted as
individual arguments to 'bos create'.
Change-Id: Ie8b0a69908b3419af303716acce51e8d1e97837b
Reviewed-on: http://gerrit.openafs.org/7930
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Ken Dreyer <ktdreyer@ktdreyer.com>
Fix the Unix examples to use ":volume" instead of "#volume", and add
a couple more examples.
Change-Id: I2e7907b128248343d99136552ab791b9bf0246ca
Reviewed-on: http://gerrit.openafs.org/8052
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: Derrick Brashear <shadow@your-file-system.com>
Add new "FreelanceDiscovery" configuration option to permit
Freelance dynroot mode to be used without the automatic discovery
of cells and generation of mount points.
Change-Id: I5520c3b3e2388b984c7120212d4f0167dc2f2bc3
Reviewed-on: http://gerrit.openafs.org/7950
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Tested-by: Jeffrey Altman <jaltman@your-file-system.com>
Add "ShortNames" option to control whether 8.3 compatible short
names are generated for objects stored in AFS. Set the default
to on for all operating systems prior to Windows 8 and Server 2012.
Change-Id: I27b4631334e2739da5c6485b49efa3ae12d880a9
Reviewed-on: http://gerrit.openafs.org/7949
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Tested-by: Jeffrey Altman <jaltman@your-file-system.com>
Expand on support for integrated logon details. Explain the
new capabilities for per-user configuration and name mapping.
Change-Id: I6aef3f99cb54aa964f9a6dbc3992031d6199e97d
Reviewed-on: http://gerrit.openafs.org/7905
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Tested-by: Jeffrey Altman <jaltman@your-file-system.com>
OpenAFS does not have separate distributions for the United States
and the rest of the world. Nor are there any restrictions on the
capabilities of the Update Server.
Change-Id: I834d86764bb3d8df4cce62b9cbaa33bff455bc30
Reviewed-on: http://gerrit.openafs.org/7902
Tested-by: Jeffrey Altman <jaltman@your-file-system.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@dementix.org>
2 terabytes is 2^41 bytes, not 2^31 bytes. Also clarify that volumes
can be much larger than this.
FIXES 130188
Change-Id: Id667b2827900dbe447828d773c7b90e9611288a2
Reviewed-on: http://gerrit.openafs.org/7598
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Tested-by: Jeffrey Altman <jaltman@your-file-system.com>
We were specifying exactly the same format in two different places;
consolidate them into one place. In addition, explicitly say there are
is no way to specify a range of addresses, in case some people are
confused by the previous versions of this man page that erroneously
said you could use 255 as a wildcard.
Change-Id: I18d96ee9e6c43dfb62719323fa7eb8d9f254e273
Reviewed-on: http://gerrit.openafs.org/7565
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@dementix.org>
Commit 80fc888a92 got some of this, but
forgot the other reference. We don't support these anywhere, so remove
it here, too.
FIXES 125340
Change-Id: I536336634beb835c9e1c93e23f8d7329fa821c96
Reviewed-on: http://gerrit.openafs.org/7564
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@dementix.org>
They were copied from another command; corrected them.
Change-Id: Ic77f1a91520ec4147e42864438d98942f6a7effc
Reviewed-on: http://gerrit.openafs.org/7305
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Michael Meffie <mmeffie@sinenomine.net>
Reviewed-by: Ken Dreyer <ktdreyer@ktdreyer.com>
Reviewed-by: Andrew Deason <adeason@sinenomine.net>
Reviewed-by: Derrick Brashear <shadow@dementix.org>
fs newcell works slightly differently on Windows. Document the
differences in the man page.
FIXES 125094
Change-Id: I3fb71ebb28290222069d795762f50a82f3fb6495
Reviewed-on: http://gerrit.openafs.org/6919
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil>
Reviewed-by: Andrew Deason <adeason@sinenomine.net>
Reviewed-by: Derrick Brashear <shadow@dementix.org>
High security mode for integrated logon never was high security.
It use was deprecated in the 1.5 series and it has no use at all
in the afs redirector world. Remove it.
FIXES: 21702
Change-Id: I019b4fecc430517d29195e79e39529a782c88073
Reviewed-on: http://gerrit.openafs.org/7285
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Tested-by: Jeffrey Altman <jaltman@secure-endpoints.com>
Reviewed-by: Jeffrey Altman <jaltman@secure-endpoints.com>
Add the dest path component in the quick start guide instructions for
copying files from a binary OpenAFS distribution file.
Change-Id: I5c39ac0426ef2eab89ae5d3df260628e949dc21e
Reviewed-on: http://gerrit.openafs.org/7187
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@dementix.org>
OpenAFS changed the behavior of implicit administrator permission
for directory ownership. In OpenAFS only the volume root directory
owner has implicit administrator permissions and they apply to all
directories in the volume not just those with matching ownership.
Change-Id: I8ca0a8874fe17cf7fc575107bd76efb5dc472b10
Reviewed-on: http://gerrit.openafs.org/6951
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@secure-endpoints.com>
Tested-by: Jeffrey Altman <jaltman@secure-endpoints.com>
Reviewed-by: Derrick Brashear <shadow@dementix.org>
AFS's own ntpd and runntp are obsolete. Remove them from the
documentation, and recommend the OS vendor-supplied NTP instead.
Change-Id: If0cd837aa407eb49049881790e618ccd75ca6e5b
Reviewed-on: http://gerrit.openafs.org/6903
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Alistair Ferguson <alistair.ferguson@mac.com>
Reviewed-by: Derrick Brashear <shadow@dementix.org>
There were several different real and made-up hostnames and company names used
throughout our documentation examples.
The IETF has reserved "example.com" and other "example" TLDs for use in
examples (RFC 2606). Replace almost all references to ABC Corporation, DEF
Corporation, and State University, as well as "abc.com", "bigcell.com",
"def.com", "def.gov", "ghi.com", "ghi.gov", "jkl.com", "mit.edu",
"stanford.edu", "state.edu", "stateu.edu", "uncc.edu", and "xyz.com".
Standardize on "Example Corporation", "Example Network", "Example
Organization" (example.com, example.net, and example.org).
The Scout documentation in the Admin Guide contains PNG images that contain
the old cell names, so I left those references until the images can be
replaced.
Change-Id: I4e44815b2d2ffe204810b7fd850842248f67c367
Reviewed-on: http://gerrit.openafs.org/6697
Reviewed-by: Jeffrey Altman <jaltman@secure-endpoints.com>
Tested-by: Jeffrey Altman <jaltman@secure-endpoints.com>
Provide examples of the direct volume access syntax, using the
fictitious example.com cell.
Change-Id: Ia2ea592531e29f6b744d0bd6993d598d78a799c4
Reviewed-on: http://gerrit.openafs.org/6691
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@secure-endpoints.com>
Tested-by: Jeffrey Altman <jaltman@secure-endpoints.com>
Add missing BlockSize registry value
Correct AFSRedirector\NetworkProvider registry key description
Add note that LanAdapter value is ignored if SMB mode is not in use.
Change-Id: I449988f1f6841c1b254d73b08a6ee53ca2dbaeda
Reviewed-on: http://gerrit.openafs.org/6685
Reviewed-by: Jeffrey Altman <jaltman@secure-endpoints.com>
Tested-by: Jeffrey Altman <jaltman@secure-endpoints.com>
Add man pages for two new Windows only commands
fs getverify
fs setverify -verify {on, off}
Change-Id: Id784608fba35147a4e33f22e43c7cd50a2307b9e
Reviewed-on: http://gerrit.openafs.org/6632
Tested-by: Jeffrey Altman <jaltman@secure-endpoints.com>
Reviewed-by: Jeffrey Altman <jaltman@secure-endpoints.com>
*) Remove all LWP specific code from the fileserver, and make pthread
the default
*) Build the pthreaded fileserver in the 'viced' directory, rather than
in tviced
*) Move the DAFS specific files from tviced to viced (arguably, these
should move into dviced, but there are currently no source files in
that directory)
*) Remove tviced from the build
Change-Id: I6e186c9fad6d9dccd04cf1317a80c087587ef25f
Reviewed-on: http://gerrit.openafs.org/5816
Reviewed-by: Derrick Brashear <shadow@dementix.org>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
A user on the openafs-info mailing list noted that the Admin Guide is
unclear about creating read-only replicas on different partitions on
the same fileserver. Clarify the rules here.
Change-Id: I8229b4fba36c128772bb8198e6b8310a51206c03
Reviewed-on: http://gerrit.openafs.org/5745
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Andrew Deason <adeason@sinenomine.net>
Reviewed-by: Derrick Brashear <shadow@dementix.org>
(Most of) the dafs binaries are called da(something). Update the
example in the dafileserver documentation so that we call the binaries
by the names that they are actually installed with on the system.
Change-Id: I05906758aa2b00ea7bc7f9be10414c8ad1a5a11a
Reviewed-on: http://gerrit.openafs.org/5654
Tested-by: Simon Wilkinson <sxw@inf.ed.ac.uk>
Reviewed-by: Derrick Brashear <shadow@dementix.org>
Add the new -pidfiles option to the man page. Add a few other missing
options as well.
Change-Id: I2d72ec9948edb4dce4c6b6d974915d4ac7560b0b
Reviewed-on: http://gerrit.openafs.org/5587
Reviewed-by: Derrick Brashear <shadow@dementix.org>
Tested-by: Derrick Brashear <shadow@dementix.org>
No more support for Windows 2000.
A first pass at indication which features that are SMB only
are no longer applicable.
much more.
Change-Id: I6e6337804d75c8dccdbc66307215e18238f33dac
Reviewed-on: http://gerrit.openafs.org/5443
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@openafs.org>
Tested-by: Jeffrey Altman <jaltman@openafs.org>
a bit convoluted but this generates docbook from the pod documentation and
from that pdf, epub and mobi versions. we are using variablelist.as.block
since that looks prettier on smaller devices/screen.
Change-Id: I5cd51ef10448373960a0aeed15212bbcf6f44039
Change-Id: Ib222dbfa30e3af644b1dbc6738df1d39cc33c92f
Reviewed-on: http://gerrit.openafs.org/5255
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@dementix.org>
Check for kindlegen in configure and do nothing in the MOBI build
rule if the binary didn't exist.
This is still a bit of a hack since the rule will run with every
invocation of make. The target needs to be made conditional. But
at least this way make all in the documentation directory doesn't
fail.
Change-Id: I57f158929b3907678b9848a60edb9765136f7dbb
Reviewed-on: http://gerrit.openafs.org/5090
Reviewed-by: Derrick Brashear <shadow@dementix.org>
Tested-by: Derrick Brashear <shadow@dementix.org>
Add the -config option to all pts commands, so that the user can set
the location of the configuration directory to use. This is primarily
provided for testing purposes, to make it simpler to build fake AFS
cells with configuration in non-standard locations.
Change-Id: I90c9c95cbf99b3853bfbe93dab1ab71c3ae7e228
Reviewed-on: http://gerrit.openafs.org/5103
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
generate-html requires a HEADER description for pod3
The Windows makefile needs to process pod.in files.
Change-Id: I5ac964cc8c1af73510d17b3a31bf1a9a5df3a58f
Reviewed-on: http://gerrit.openafs.org/5116
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Tested-by: Jeffrey Altman <jaltman@openafs.org>
Reviewed-by: Jeffrey Altman <jaltman@openafs.org>
Add PERL variable to the build system. If not specified
externally the variable will be set to 'perl'. However,
ActiveState Perl should be used and not Cygwin Perl. The build
environment should indicate that by specifying a PERL setting.
SET PERL=c:\perl64\bin\perl.exe
or similar.
Change-Id: Iaf14a82134cc2dcf3c23b1e5a0ed65606e2487bb
Reviewed-on: http://gerrit.openafs.org/5115
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Tested-by: Jeffrey Altman <jaltman@openafs.org>
Reviewed-by: Jeffrey Altman <jaltman@openafs.org>
Several of the demand attach pod files were not being processed
on Windows.
Change-Id: If211f80564115bdc184181226aa0750ba1989a55
Reviewed-on: http://gerrit.openafs.org/5114
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Tested-by: Jeffrey Altman <jaltman@openafs.org>
Reviewed-by: Jeffrey Altman <jaltman@openafs.org>
On Windows, the git repository is checked out as CR-LF.
Tell perl to open the pod file with cr-lf as the end of line.
On Windows, the input file names are of the form podX\foo.pod.in.
Cygwin perl cannot parse the directory for the file name unless
the path separator is converted from \ to /.
Change-Id: I7139bd2138573e938ea3e8386685f3b69e131c4d
Reviewed-on: http://gerrit.openafs.org/5113
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Tested-by: Jeffrey Altman <jaltman@openafs.org>
Reviewed-by: Jeffrey Altman <jaltman@openafs.org>
