OpenBSD follows the policy of using a separate common
param file (post 1.4.x). However, when introducing support
for i386 OpenBSD 4.7, this was not done and a single param
config header file was created instead. This patch changes
the param files for OpenBSD 4.7 so that they are
consistent with the other OpenBSD versions by using a
separate common param header file.
Change-Id: I9d828d2447a2d018eeea0fbe9f4c047ac819d209
Reviewed-on: http://gerrit.openafs.org/3725
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
Our imported roken.h provides definitions for bswap16 and bswap32,
but configure doesn't check to see if those functions already exist.
On operating systems where they do, and where the header containing
them is included in our build, this results in compilation errors.
Add a configure test for bswap16 and bswap32, which is complicated
by the fact that they may be macros, or static inline functions, so
a simple CHECK_FUNCS won't work.
Change-Id: Iae3411bf4bb22af8cfd770e01026a28e1863e078
Reviewed-on: http://gerrit.openafs.org/3613
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tidy up our list of header includes so it's easier to see what
we're testing for. The list is now one-per-line, in alphabetically
sorted order.
Note that this won't affect our use of the default include set, as
autoconf will already have tested for all of those before it starts
this CHECK_HEADERS run.
Change-Id: Iffc8c3bc7cbd56d87508ebdde38e61f8747d0501
Reviewed-on: http://gerrit.openafs.org/3612
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
Use the HP-UX-specific libHcurses instead of libcurses, like we used
to. Otherwise we fail to link some gtx programs.
Change-Id: I7b8a012d5d263c611a144e05466c5435b5ff310a
Reviewed-on: http://gerrit.openafs.org/3583
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Tested-by: Derrick Brashear <shadow@dementia.org>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Add roken's mkstemp to the build on all platforms, either through
configure (Unix) or explicitly (Windows). Change all callers so
that mkstemp is used unconditionally, rather than falling back
to more risky alternatives.
This is based on original change from Russ Allbery submitted as
http://gerrit.openafs.org/2146
Change-Id: Ia1def41e438e6517b3e7cd5790df3c99eddb8ef6
Reviewed-on: http://gerrit.openafs.org/3398
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Presently, the used curses-library are determined by OS.
The leads to a build error when no curses-headers are installed.
Use configure to test if curses.h or ncurses.h is present.
ncurses takes precedence over curses.h.
If neither the curses- nor ncurses-libs are available, do not build
afsmonitor and scout.
A summary at the end of the configure should make this clear to
everyone.
The variable TXLIBS has been renamed to LIB_curses.
Change-Id: I3f661e0b6199be41818dc22149b061e3d599b77f
Reviewed-on: http://gerrit.openafs.org/3345
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Add the strsep function (as rk_strsep) to the OpenAFS roken build.
This function is required by Windows, and is now checked for on Unix.
Change-Id: I71d8e11a30c34aaa89d85d1e6e527d594d5734af
Reviewed-on: http://gerrit.openafs.org/3371
Reviewed-by: Jeffrey Altman <jaltman@openafs.org>
Tested-by: Jeffrey Altman <jaltman@openafs.org>
vsyslog on AIX (added to rokenafs by commit
f21fbf6b9ce1dfcb0ea1ef52c686d1370c810609) requires rk_*printf,
add them to the libroken build.
Change-Id: I243cb89b5715be03920c562559b326786a9e9518
Reviewed-on: http://gerrit.openafs.org/3320
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
in order to make aix happy, build vsyslog if we have it.
Change-Id: I78e7870ed4fef7ee9d41b0ae6096e6c2b1c6cc19
Reviewed-on: http://gerrit.openafs.org/3316
Reviewed-by: Simon Wilkinson <sxw@inf.ed.ac.uk>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Use the stdio_ext functions provided by solaris and glibc
instead of directly accessing private stdio FILE structure
members. This is needed for 64-bit solaris builds and is more
portable in general since the FILE structure is meant to be
opaque. Remove the duplicated code in the pthreaded butc
package.
Change-Id: Idbefa88e2563bb117322e818b1300b324fc3626d
Reviewed-on: http://gerrit.openafs.org/3257
Reviewed-by: Jeffrey Altman <jaltman@openafs.org>
Tested-by: Jeffrey Altman <jaltman@openafs.org>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
The configure test for 'winsize' existence was using sys/termios.h,
but some platforms (AIX) have termios.h but no sys/termios.h. So, use
termios.h instead where available.
Change-Id: I284b7fa27ceeed84d9e14b62032176846d764bf2
Reviewed-on: http://gerrit.openafs.org/3258
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
With kernel 2.6.37 the new entry point for mounting a filesystem
is the mount() operation instead of get_sb().
Replace afs_get_sb with afs_mount if the new operation is
available, and use mount_nodev instead of get_sb_nodev.
Note that this is not strictly required for 2.6.37 since the old
interfaces are still around, but we might as well switch now.
Change-Id: Icc73a552fd53148bdd7b84e6d3266491488d9ed2
Reviewed-on: http://gerrit.openafs.org/3245
Reviewed-by: Marc Dionne <marc.c.dionne@gmail.com>
Tested-by: Derrick Brashear <shadow@dementia.org>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Include libroken as a library in its own right, so that the whole
of the code can benefit from it. This change purely adds libroken
for the Unix build system. It doesn't replace those pieces of
libroken in hcrypto or util, or enable it for Windows.
There is also the option of using a system-install libroken, if one is
found at configure time.
*) If --with-libroken=yes, or is not supplied than a system library
will be used if suitable. Otherwise, we'll use the internal
libroken
*) If --with-libroken=/path/to/installation then the libroken at
that path will be used. If there is no libroken there, or it
is not suitable, an error will be returned
*) If --with-libroken=internal then the internal libroken is used,
regardless of what is present on the system.
We deliberately do not provide installed headers for the internal
libroken. If other applications wish to make use of libroken, then
they should use the Heimdal one, rather than piggybacking on ours.
Change-Id: Iff01e1e17090404cc8e4783108ae8a8784170918
Reviewed-on: http://gerrit.openafs.org/3191
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
The bit of code that allows aklog -setpag to work with recent
linux needed to be moved along with the change from ktc_SetToken
to ktc_SetTokenEx.
While we're in this bit of code, make it depend on the definition
of the syscall in the user space headers instead of relying on a
kernel configure test.
Change-Id: I0e556b514986b5d06daabcff67ecd51b0e4becdd
Reviewed-on: http://gerrit.openafs.org/2976
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
The recent hcrypto pullup added a depedence on the errx() function,
which isn't present on Irix. Solve this by pulling in a load more
of libroken, in order to provide this function.
In the long term, libroken should get split out into its own
directory, and the ability to use a previously installed
libroken should be added. For now, this will hopefully get Irix on
its feet again.
Change-Id: I0642f80079e113403cbef6eca03ca652616ddc61
Reviewed-on: http://gerrit.openafs.org/2904
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
the test for this build feature is reversed. by default, the value for
with_linux_kernel_packaging will not be defined which makes the existing
test pick MPS='SP' instead of LINUX_WHICH_MODULES. based on the configure
help messages, this would appear to be an opt-in not an opt-out.
...
Optional Packages:
...
--with-linux-kernel-packaging
use standard naming conventions to aid Linux kernel
build packaging (disables MPS, sets the kernel
module name to openafs.ko, and installs kernel
modules into the standard Linux location)
...
Change-Id: Ie16fba165e6c85b7ecbce887badb9ffc06a3a7a8
Reviewed-on: http://gerrit.openafs.org/2869
Reviewed-by: Simon Wilkinson <sxw@inf.ed.ac.uk>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Add support for an atomic type, and atomic operators for RX. This
builds on work which has already been done for Windows, where
InterlockedOperations are used for statistics gathering.
A new opaque type, rx_atomic_t is introduced so that normal arithmetic
operations will fail on atomic data.
An implementation using native atomic methods is provided for Darwin,
Solaris and Windows. A native kernel implementation is used for Linux.
Where OpenAFS is built with a sufficiently modern gcc, gcc's atomic
primitives will be used. Sadly, gcc's builtin operations are not
available for i386, they will only be used with builds the set
-march=i486 (or later).
Otherwise, we fall back to a single mutex which protects all atomic
operations.
Change-Id: I5f69677a80617e3936f82b177cd58250a6dbf31f
Reviewed-on: http://gerrit.openafs.org/2858
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@openafs.org>
Tested-by: Jeffrey Altman <jaltman@openafs.org>
Add an implementation of dirfd to our local roken implementation for
platforms that don't have one.
Code taken from Heimdal.
Change-Id: I4284c18430b6f49200886f5340191a14dcf34b57
Reviewed-on: http://gerrit.openafs.org/2608
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
When available, use POSIX positional read and write
calls in the ihandle package. Originally written
by Derrick Brashear and Andrew Deason.
Change-Id: I29a9d830872cb920e8ed5820e33d3cbcb7247460
Reviewed-on: http://gerrit.openafs.org/1562
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
Move all of our AC_CHECK_FUNCS calls into a single, ordered, list
so that it's easier to see what's being checked for and what's not.
Change-Id: Ib8e356ada469d4b3be8cc6387df91de21a2d1e8a
Reviewed-on: http://gerrit.openafs.org/2598
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
Add a configure test for the arc4random function which hcrypto can
use as an entropy source
Change-Id: If1ae243d2f2850be0efd0030a37ac026cdb0e7ba
Reviewed-on: http://gerrit.openafs.org/2597
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
acinclude.m4 now has struct label support detection and sets
HAVE_STRUCT_LABEL_SUPPORT in afsconfig.h. Obviates complicated
ifdefs in various src/afs/ and src/rx/ files. Must run regen.sh
to generate new configure and afsconfig.h.in, then configure will
detect label support and set afsconfig.h appropriately. Not sure
what to do for Windows, but should be a step in the right
direction.
Fixes issue with compilation of libuafs on IRIX and sunpro by accurately
detecting label support.
Change-Id: I092eda47c4cfcc2517dc39f5e48b5038c413cb01
Change-Id: I2ff8449b28db645d9cfd27796b5f89e5c328a2b2
Reviewed-on: http://gerrit.openafs.org/2516
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
In 2.6.36, the delete_inode and clear_inode inode operations
are replaced by evict_inode.
Rename our current clear_inode to evict_inode, and add a few
things that were previously handled by the generic delete_inode.
This is required for 2.6.36.
Change-Id: I68d75830b43df710ccce173ab36f3bb39074c59e
Reviewed-on: http://gerrit.openafs.org/2544
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
As part of changes to the truncate sequence, inode_setattr() no
longer exists, and all filesystems have to define the setattr op
so we can assume that it is not NULL.
Introduce a compat inline function afs_inode_setattr that hides
the tests and the different versions from the main code.
Note that the existing test for the inode_setattr() return type
will fail, but the value is no longer used in that case.
This is required for 2.6.36
Change-Id: I2f5e8a0b660b48453d0152b6c4db64e57539f91a
Reviewed-on: http://gerrit.openafs.org/2543
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
don't enable kernel pmtu, don't collect errors.
a report from Marc Dionne suggests there are still issues here
Change-Id: Ib54fa522ba53efe50e8f08b27422ebfc8af7f9e5
Reviewed-on: http://gerrit.openafs.org/2538
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
Force using an absolute path for install-sh. Autoconf normally prefers
using a relative path, which confuses (at least) part of the libafs
build system.
Change-Id: I6962e61bb866362f674708e611ff22eb190a771a
Reviewed-on: http://gerrit.openafs.org/2461
Tested-by: Andrew Deason <adeason@sinenomine.net>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
Check to see if we need to explicitly include a library in order
to get the crypt() function
Change-Id: I9bd1d70e420d4d1656bd86cd3215525102fa6259
Reviewed-on: http://gerrit.openafs.org/2404
Tested-by: Derrick Brashear <shadow@dementia.org>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
if we can get a socket error to let us get pmtu discovery info,
use it.
Change-Id: I7756c1a00e6cb018146a5b0545bed828446e5483
Reviewed-on: http://gerrit.openafs.org/2400
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
if we're flex, we may need to be lex-compatible. engage
it if we're flex
Change-Id: If9a39ca0bce3f4a68b742d1e8f0c679d3f79896e
Change-Id: I7f245d579bcc46fdd0aa7202bbd45f3f9f647ebc
Reviewed-on: http://gerrit.openafs.org/2399
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
can't eject the ifdef yet as this is not fully portable now.
however, just enable it always.
Change-Id: Ia7a49a10377f308740ebd42027ac9748b073016e
Reviewed-on: http://gerrit.openafs.org/2396
Tested-by: Jason Edgecombe <jason@rampaginggeek.com>
Tested-by: Derrick Brashear <shadow@dementia.org>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
make dumptool in test suite compile on macos again
Change-Id: Id60f625ce53bc9695673b68c733fa653521a8122
Reviewed-on: http://gerrit.openafs.org/2387
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
This generalizes the use of the exportfs API and file handles
to open disk cache files for all 2.6 kernels.
Code outside of src/afs/LINUX (ex: afsd) can assume that file
handles are used for all 2.6 kernels and can use AFS_LINUX26_ENV
to check.
Within src/afs/LINUX/osi_file.c, NEW_EXPORT_OPS can be used to
determine if the old exportfs API (pre 2.6.24) or the new one
applies.
All traces of the LINUX_USE_FH define are removed.
FIXES 127530
Change-Id: I6803101c56981f9f674cef581f7299656723fdf3
Reviewed-on: http://gerrit.openafs.org/2260
Tested-by: Marc Dionne <marc.c.dionne@gmail.com>
Reviewed-by: Simon Wilkinson <sxw@inf.ed.ac.uk>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Using unix domain sockets for FSSYNC has been the default for some
time now; make it clear from the configure help output that this is
the case.
Change-Id: Ibe8b41361242d6cea035b7710910d7d693f60a85
Reviewed-on: http://gerrit.openafs.org/2241
Tested-by: Andrew Deason <adeason@sinenomine.net>
Reviewed-by: Russ Allbery <rra@stanford.edu>
Remove the configure flag to specify the location of the Digital
UNIX kernel headers and some setup for the kernel module build.
Note in README that Digital UNIX / Tru64 is supported for servers
only.
Change-Id: I983f74068b1a1ae76d9a2b2549a8a141dba4e075
Reviewed-on: http://gerrit.openafs.org/2207
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
Previously, building with Kerberos support required either passing a
flag to configure giving the location of a krb5-config script, or
manually setting variables specifying the Kerberos libraries and
header path. Replace that code with code that checks for Kerberos
libraries automatically and builds the Kerberos code if any were
found, with support for doing direct library probing if there is no
krb5-config script.
Add several platform-specific overrides directly into the configure
support, so we should be able to build out of the box on Mac OS X 10.3,
HP-UX, and AIX Kerberos with the new probes.
The Kerberos Autoconf macros are now the versions that come with
rra-c-util and are tested with multiple other packages, so both
OpenAFS and those packages will be able to benefit from further
portability improvements.
Update README for the new building instructions, documenting how to
configure the Kerberos probes if they can't automatically figure out
the location and flags for Kerberos on your system.
Change-Id: Ia35bb0dbc6b94c6b4dfe8165388447dbfcb31a29
Reviewed-on: http://gerrit.openafs.org/2026
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
on macos systems where we can't get the environment,
just return from ktc_newpag
Change-Id: I9a169d0bf035c40d727a386bb3d2070eea225ed4
Reviewed-on: http://gerrit.openafs.org/2150
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
In 2.6.35, the fsync file operations drops the dentry argument.
Add a configure test and cope.
Change-Id: Iaf660808d52688a4a8fd53a76d8d055602f746b9
Reviewed-on: http://gerrit.openafs.org/2064
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Reviewed-by: Simon Wilkinson <sxw@inf.ed.ac.uk>
Tested-by: Derrick Brashear <shadow@dementia.org>
AC_CHECK_LINUX_STRUCT for the check for ctl_name in ctl_table instead
of AC_CHECK_LINUX_FUNC.
Change-Id: Ia0e0de5d62ce7f702a3f1d7a5cd4d19ef726095c
Reviewed-on: http://gerrit.openafs.org/2057
Reviewed-by: Simon Wilkinson <sxw@inf.ed.ac.uk>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
If we are building for are kernel with keyrings, and we can
guarantee that we can make use of those keyrings, then we no longer
need to probe for the syscall table at all. Change our default
behaviour so that when these two conditions are true, syscall probing
is disabled. Both --enable-linux-syscall-probing and
--disable-linux-syscall-probing can be used to override the
autodetection and force things one way or the other.
We have to check that we can use the keyrings because there was a
window in the 2.6 kernel series where keryings were available, but
the key_type_keyring definiton (which we use to create the session
keyring) wasn't exported. In that situation, we attempt to traverse
the process table and use the type of init's session keyring. This
traversal is fragile, and if it fails, keyring PAGs will be disabled.
So, we still want to be able to fall back to patching the syscall
table, if we can, in this case.
FIXES 125215
Change-Id: I11ba5c68fe37609bbd6b9c9f7e7c699334f42ebc
Reviewed-on: http://gerrit.openafs.org/2002
Reviewed-by: Marc Dionne <marc.c.dionne@gmail.com>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Reviewed-by: Russ Allbery <rra@stanford.edu>
Tested-by: Russ Allbery <rra@stanford.edu>
Use AC_TYPE_SSIZE_T to handle the ssize_t check (introduced in Autconf
2.60). Use AC_CHECK_TYPE, not AC_CHECK_TYPES, to check for sig_atomic_t
and socklen_t, and define them in afsconfig.h if they're not present on
this platform. Do not define them in stds.h, since stds.h is an installed
header file and cannot rely on Autoconf defines.
Change-Id: I80e1a00efc84420002a95d6cafc25ea70befa49d
Reviewed-on: http://gerrit.openafs.org/2018
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
The Linux read/write file operations take a position. Use this
position to determine where we're reading or writing in a file,
rather than using the vfs_llseek() operator to set the file
position argument. This avoids a potential race condition, as
well as simplifying this code.
Change-Id: I82b4a109f9871fa2ce5b308bc32923b1bf910920
Reviewed-on: http://gerrit.openafs.org/1993
Reviewed-by: Andrew Deason <adeason@sinenomine.net>
Reviewed-by: Marc Dionne <marc.c.dionne@gmail.com>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
Define the PageCheck family of functions using PageFsMisc
equivalents if those are found. I encountered a need for this
on Centos 5.5 (2.6.18-8.el5xen), but it may be more general.
Change-Id: I365a769614fd7514e0c0223bf1854cce09f759f7
Reviewed-on: http://gerrit.openafs.org/1982
Reviewed-by: Simon Wilkinson <sxw@inf.ed.ac.uk>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
AC_CACHE_CHECK has been available since Autoconf 2.5 (released in
1995), and provides a simpler mecahnism for performing cached checks
than AC_CACHE_VAL does. Modify all of our simple AC_CACHE_VAL calls
to use AC_CACHE_CHECK.
Change-Id: I490f5e6ae5a3fdc1ada88aba9cd22c89d415a376
Reviewed-on: http://gerrit.openafs.org/1974
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
