A volume examine on a non-dafs volume server/fileserver can show old
information, including old volume update time, for up to about 20
minutes. The non-dafs volume server reads the volume information
from the volume headers, which are updated by the fileserver only
periodically to avoid excessive i/o.
Before dafs, when the volume server performed a volume examine, the
volume server would send a fssync command to the fileserver with the
request FSYNC_NEEDVOLUME and mode V_READONLY. The fileserver writes
the current memory contents to disk on this fssync command. The
volume server would then attach the volume, reading the current
volume data.
The dafs volume/fileserver avoids this extra i/o by using a new set
of fssync commands to retrieve the volume information from the
fileserver. However, the non-dafs volume server does not use the new
fssync commands and reads the volume headers from disk.
Revert the volume attachment processing for the non-dafs volume
server to request the volume with the V_READONLY mode. This causes
the fileserver to update the volume headers, allowing the volume
server to read the up to date volume header data.
Sadly, this adds another dafs ifdef to the already twisty maze of
passages that all look alike.
This changes the volserver to use the V_READONLY attachment mode
only for the case of getting a single volume, as that what was
done in 1.4.x.
Change-Id: Ibee25bfcfb087e73ccbc17e181a99da49a7751ae
Reviewed-on: http://gerrit.openafs.org/8327
Reviewed-by: Andrew Deason <adeason@sinenomine.net>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Allow non-fileserver, non-dafs, programs to attach volumes with the
V_READONLY mode again. This was lost during the code changes for
dafs.
The caller sends a fssync request to the fileserver, which updates the
on-disk contents of the volume headers, before the caller reads the
volume headers, allowing the caller to have the most recent info about
the volume. The fileserver still has the volume in use.
Later in the attachment process, the inUse check is skipped for the case
of a non-fileserver process which is attaching the volume using the
V_READONLY mode, otherwise the attachment would incorrectly mark the
volume as needing to be salvaged.
Note: The mode checks in VMustCheckOutVolume() are correct. We must
checkout the volume when attaching with the V_READONLY mode. This
fix updates the VShouldCheckInUse(), in which an additional
exception was added to cover the case for V_READONLY mode from a non-
fileserver process.
Note: A check is added in the dafs version of attach to avoid overwriting the
inUse field when a volume utility is attaching a volume in V_READONLY mode.
Currently, V_READONLY is not used by dafs, but this was done to avoid future
errors.
Change-Id: I09d3af1e74087d0627399392e662e5075d41cdeb
Reviewed-on: http://gerrit.openafs.org/8339
Reviewed-by: Andrew Deason <adeason@sinenomine.net>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
The value of the -cb argument for the fileserver was not checked correctly.
The fileserver refused to start for any number of callbacks.
Change-Id: I25fe9d81ba20d286f36999a554c94fda4ef7fb2f
Reviewed-on: http://gerrit.openafs.org/8420
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
hkTemp is not the correct registry handle. Use hkUserMap
Change-Id: I44776b6dd46bb0ecac0c729bf80ed9261ddf7a67
Reviewed-on: http://gerrit.openafs.org/8412
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
smb_ReceiveNTTranCreate would make use of 'fidp' before it was
allocated.
Change-Id: Ib4a7262ba09f15049f1855535250638c2e5d17a4
Reviewed-on: http://gerrit.openafs.org/8411
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Modify cm_Analyze() to accept an AFSFetchStatus parameter which
when set is verified for validity. If the status info is invalid,
then consider the response equivalent to VBUSY and attempt to
query an alternate file server (if any.) Log the invalid status
info to the Windows Application Event Log as a Warning.
When cm_Analyze() is processing the response of an RPC that returns
multiple AFSFetchStatus structures, pass in the one that corresponds
with the source object.
Change-Id: I84be22f332ff6fd7bc9620347f958538a3412380
Reviewed-on: http://gerrit.openafs.org/8404
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Break out validity checking for AFSFetchStatus responses into
a new function.
Change-Id: I15d2ed12ed2d9ca9a24d6f717243d823db22d30c
Reviewed-on: http://gerrit.openafs.org/8403
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
cm_MergeStatus() can fail if the AFSFetchStatus InterfaceVersion
field does not have the value 0x1 as that is the only version that
is defined by the protocol. The return code will be CM_ERROR_INVAL.
cm_MergeStatus() returns 0 on success.
Update all of the call sites.
Change-Id: Iddf56f68dfa26b0f11744b905a70d7d39ad853d1
Reviewed-on: http://gerrit.openafs.org/8402
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Currently we record last_error as the last getuerror() we got when
failing to read in a slot in UFSGetDSlot. For kernels that do not have
getuerror(), this variable is currently useless, and we do not record
anywhere what the last error received was (besides logging it via
afs_warn).
So, for non-uerror, just record what 'code' we got, so we at least
have something.
Change-Id: Iede39bbeee48ea48f380b788f2968886a831a918
Reviewed-on: http://gerrit.openafs.org/8369
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
When we log that a disk read error occurred during GetDSlot, log which
slot we were trying to read for convenience.
Change-Id: I35ffa94ff31cee735e85542ed9697b5f14180226
Reviewed-on: http://gerrit.openafs.org/8368
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Actually count the number of packets we're given, so we don't bail out
early because num_pkts is 0. Without this, we effectively do not free
most packets for non-pthreads Rx, so e.g. the unix kernel module will
leak memory quite quickly and be very slow.
This was introduced by 170dbb3c.
Change-Id: Id781e37170683c422b40079fdda018be1caddaf3
Reviewed-on: http://gerrit.openafs.org/8401
Tested-by: Andrew Deason <adeason@sinenomine.net>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Simon Wilkinson <simonxwilkinson@gmail.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
In the RPC service routines do not call calloc() directly.
All memory will be deallocated by a call to MIDL_user_free()
so use MIDL_user_allocate() to perform the allocation.
Modify MIDL_user_allocate() to call calloc() instead of malloc()
to ensure that the memory is initialized to NUL bytes.
Change-Id: I4d458bb5d8888c63040f213550d04f481e98175b
Reviewed-on: http://gerrit.openafs.org/8365
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Tested-by: Jeffrey Altman <jaltman@your-file-system.com>
_wcsdup is not mapped by roken.h. Use wcsdup which is.
Change-Id: I0f6bb3f5465c74ad52f992892fcbc9837c276c0c
Reviewed-on: http://gerrit.openafs.org/8364
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Tested-by: Jeffrey Altman <jaltman@your-file-system.com>
All filesystems must have their own locking now.
We have been MPSAFE for quite some time, but the preprocessor macro
"MPSAFE" has been removed and we must catch up in order to compile.
The MNTK_MPSAFE macro has not yet been removed, but it is toothless
now, so we can preemptively stop using it.
Change-Id: I9d9090fd1afc020670a0cf874baacf483fd34915
Reviewed-on: http://gerrit.openafs.org/8366
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
The NTMakefile changes were omitted from the patch which added
opr/dict.h for Unix. Add them here.
Change-Id: I240b40116aed83dcf232a1d741d0ef7b442bf6f7
Reviewed-on: http://gerrit.openafs.org/8358
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Replace the absolute symlink processing in AFSLocateName().
Implement AFSIsAbsoluteAFSName() to test whether or not the
path is in fact an absolute /afs path by comparing the input
string to the registry MountRoot value which specifies the
case sensitive root path for all absolute symlinks stored
in the AFS cell.
If a symlink target path begins with a directory separator
and is not an absolute afs path name, return an error.
Construct the substitution string using the target path
without the MountRoot prefix.
Add functionality to AFSRedir.sys to read the MountRoot
from the registry and pass it on to AFSRedirLib.sys.
Change-Id: Ie1df24da1e6de257c73dc34c80a75288bad47d29
Reviewed-on: http://gerrit.openafs.org/8353
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Tested-by: Jeffrey Altman <jaltman@your-file-system.com>
if we have code which uses HAVE_POLL, check for poll().
Change-Id: I1baf61541b243f82b3acca112db2cbbca813182b
Reviewed-on: http://gerrit.openafs.org/8357
Reviewed-by: Chaskiel Grundman <cg2v@andrew.cmu.edu>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Add a simple implementation of a dictionary/hash structure based around
opr queues and the jhash hashing function.
Change-Id: I4ae5cafcef377b05c8caa7c455737a992b1d36cd
Reviewed-on: http://gerrit.openafs.org/8355
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Add a function to jhash that can be used to hash a pair of unsigned
integers (or other stuff that can cast to them) without having to build
up an array.
Provide a couple of tests for the new function
Change-Id: I594848f64316fb459eff565933691f560512ca79
Reviewed-on: http://gerrit.openafs.org/8354
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
The change to cleanup temporary files after tests
(0c3670914a) broke all attempts
to run the tests using libwrap, as it would cause libwrap to run
the binary named "MAKECHECK=1"
Move the variable defintion before the libwrap invocation to fix this.
Change-Id: I330267c9b53483abccf43d60a7dc8f8d973c3959
Reviewed-on: http://gerrit.openafs.org/8356
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: Derrick Brashear <shadow@your-file-system.com>
Incrementing the cm_conn.refCount must be performed while holding
the cm_connLock in order to prevent cm_GCConnections() from
seeing an in-use object as having a zero count.
Change-Id: Ifaa755ef0f04f3bf64223434dfc518bc73d01d4d
Reviewed-on: http://gerrit.openafs.org/8347
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Tested-by: Jeffrey Altman <jaltman@your-file-system.com>
The cm_volume allocation within cm_FindVolumeByName() was racy.
Given how locks were obtained and dropped it was possible for two
threads to both determine that a cm_volume_t object needed to be
allocated. It might even have been possible for two threads to
attempt to allocate the same object.
This refactoring ensures that if a volume cannot be found under
a read lock that a second search is performed under the write lock
in case the object had in fact been allocated during the transition.
Once it is determined that an allocation is required, the cm_volumeLock
is not dropped until the object has been built and inserted into the
name hash table. This ensures that two threads cannot attempt to
allocate a cm_volume object for the same volume group.
InterlockedIncrement is used to manage the cm_data volume count.
Change-Id: I64c07cbc0f7968c5580478ff33214f67088072f8
Reviewed-on: http://gerrit.openafs.org/8346
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Tested-by: Jeffrey Altman <jaltman@your-file-system.com>
Instead of locally incrementing and decrementing the cm_volume
refCount field use cm_GetVolume and cm_PutVolume. Doing so makes
it easier to see if there is an imbalance.
Change-Id: Id62e42a74a9b1d9865a00dae177550a93e6e0f08
Reviewed-on: http://gerrit.openafs.org/8345
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Tested-by: Jeffrey Altman <jaltman@your-file-system.com>
Replace foo++ with InterlockedIncrement for cm_data cell and scache
counters which are used for allocating objects.
Change-Id: I09d2a536ef559d6d5873a3fdead4c8580bc93a0c
Reviewed-on: http://gerrit.openafs.org/8344
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Tested-by: Jeffrey Altman <jaltman@your-file-system.com>
If the FID is known to have been deleted, drop all dirty data
returned from the redirector on the floor.
Change-Id: I8b9a1a69d632d7243bdbcfedb5329558e0004d2e
Reviewed-on: http://gerrit.openafs.org/8343
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Tested-by: Jeffrey Altman <jaltman@your-file-system.com>
the nocache read parms need to have the offset updated during a bypass
readpages request
Change-Id: Iced321e6eeab7fd784c5ccb871fcda7ff9c7493d
Reviewed-on: http://gerrit.openafs.org/8254
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Marc Dionne <marc.c.dionne@gmail.com>
The ptserver uses inet_ntoa in a few places, such as for calculating
host CPS. This isn't safe in pthreaded environments, so use
afs_inet_ntoa_r instead.
Change-Id: I84cdf606ffd44d2d87c0db509af0950a6547364e
Reviewed-on: http://gerrit.openafs.org/8287
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
RX mutexes have two mechanisms for asserting ownership of a mutex:
MUTEX_ISMINE, which returns true if the caller is the owner of the
mutex in question, and osirx_AssertMutex which fires an assertion if
the calling thread doesn't own a specified mutex.
Neither of these work with pthread mutexes on all platforms, and the
kernel support for MUTEX_ISMINE is dubious in places. Because in some
implementations, MUTEX_ISMINE tries to lock the mutex in question, a
failing call to MUTEX_ISMINE can lead to the process holding an
additional, unexpected, lock.
This patch reworks all of this, and uses the new opr mutex framework
so that we can do mutex assertions in userspace, too. We remove the
unsafe MUTEX_ISMINE macro, and replace it with MUTEX_ASSERT which
simply asserts if the specified mutex is not held by the current
thread. osirx_AssertMutex is removed as it is now redundant.
MUTEX_ASSERT will always work in kernel code.
For userspace, we provide opr_mutex_assert, which is implemented using
POSIX error checking mutexes. As error checking mutexes have a runtime
overhead, this is only available when configured with
--enable-debug-locks, the rest of the time calls to opr_mutex_assert are
no-ops.
Change-Id: I285ee2b558389fa3d63b786e4bc4420fa2126c80
Reviewed-on: http://gerrit.openafs.org/8282
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Move the kernel assertion macros out of rx_prototypes.h and into
rx_kernel.h. This solves an ordering problem if these macros are to
be used from src/rx/<arch>/*.h
Change-Id: I5f11e0802b3d25c1c32a2c646a35c0b59422ab3d
Reviewed-on: http://gerrit.openafs.org/8283
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Call the configuration directory cleanup function before exiting
so there are no files left behind, even in case of error.
Add KeyFileExt to the list of files that are removed.
Change-Id: Ie795bef0d44609b36950970244c02a6c6da1a843
Reviewed-on: http://gerrit.openafs.org/8142
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Simon Wilkinson <simonxwilkinson@gmail.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
don't allow cache bypass if execsOrWriters is true
don't trigger cache bypass based on being larger than the
"disabled" value of -1.
Change-Id: Ic174b133e5da3e9215465c9c2705c25e81a8beca
Reviewed-on: http://gerrit.openafs.org/8248
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
These were used in an earlier version of the patch that got merged.
Change-Id: Ifc5ba94392a394d0fb55c31051b4b74211cfc1f0
Reviewed-on: http://gerrit.openafs.org/8332
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
The MUTEX_* and CV_* macros leaked from RX a while ago - they mean
that most of the pthreaded tree has a dependency on RX, as well as
further confusing the difference between userspace and kernel.
Tidy all of this up so that we have opr_mutex_* and opr_cv_* macros
to handle portable locking, and use these throughout the userspace
tree. Only kernel code should now use MUTEX_* and CV_*.
Provide opr/lockstub.h as a header that can be used by non-pthreaded
code to easily stub out these functions.
Change-Id: I24be525c7667641134d50561ce7f1e2d752cdf1f
Reviewed-on: http://gerrit.openafs.org/8280
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
When the client receives a data packet from the server, it means that
the server has completed processing the client's request. This, in turn,
implies that the transmit queue can be cleared. However, we were doing
this with every incoming data packet.
Move the transmit queue clearing to the code which handles the rest of
the data packet, and make the function only run if the transmit queue
is non-empty.
Now that there's no client specific logic in the ReceiveCall section,
clean up this code to reduce duplication.
Change-Id: Ia4f9024720c676cbcc6d8426d4b94a0acded20bc
Reviewed-on: http://gerrit.openafs.org/8301
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
We acknowledge a whole transmit queue whenever an ACKALL packet is
received, or whenever the call changes direction. As the same logic
is used in both locations, pull it out into a common helper function.
Change-Id: Ia91b037c73cc0dd612ebbd0bd38ec171ec7c96a5
Reviewed-on: http://gerrit.openafs.org/8300
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Once we've moved the congestion window, there's no going back. So
any ACK packets that attempt to move the window backwards by including
a 'firstPacket' value earlier than the current window position must
be ignored.
However, we check (and ignore) these packets twice. Once in
rxi_ReceivePacket, which only checks in the client side case, and again
in rxi_ReceiveAckPacket, which has a more complete check that runs for
both client and server connections.
Remove the identical check from rxi_ReceivePacket in a continuing effort
to clean up this bit of code.
Change-Id: I090bc289848d0797860f46aec5877ad07fcc9b82
Reviewed-on: http://gerrit.openafs.org/8299
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
rxi_FindConnection checks that the connection it returns has a
security layer matching that of the incoming packet. Don't duplicate
this check within the rxi_ReceivePacket code.
Change-Id: I03e7d50ecf84f638d8e222d77defc25b8a58627a
Reviewed-on: http://gerrit.openafs.org/8298
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Refactor the call selection logic in rxi_ReceivePacket so that it is
a little bit easier to follow, and better optimised to the common case.
Split the current logic into a function for packets being received by
a server, and a function for packets being received by a client.
Change-Id: Ie27de7952cc13fa3b92619cfe68e671e6d5e170c
Reviewed-on: http://gerrit.openafs.org/8297
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
If the server is over the busy threshold, then don't create a new
call structure just to be able to send an abort on that call. Instead,
use rx_SendRawAbort to send an abort packet on the appropriate channel.
Change-Id: I02782fc25fe8ed7608b39e3f8355e2793f7526e3
Reviewed-on: http://gerrit.openafs.org/8296
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
ReceivePacket has a dpf which is conditional on the packet having a
zero callnumber. However, just before we reach this debug statement,
we always return if the header doesn't have a call number included.
So, the debug statement can never run. Just remove it, as it's
potentially confusing.
Change-Id: I5fad9f39c9a0c4aac50853aaf4f853b9f7715e61
Reviewed-on: http://gerrit.openafs.org/8295
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Move the prototype for rxi_WaitForTQBusy to rx_internal.h, and always
provide it (as a prototype for RX_ENABLE_LOCKS, and as a no-op for lwp).
Remove all of the #ifdef RX_ENABLE_LOCKS around rxi_WaitForTQBusy calls.
Change-Id: I6c2b943d6d06bf19d3cb4495201d278e3900b6ef
Reviewed-on: http://gerrit.openafs.org/8294
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
When processing the set server preferences pioctl call cm_RankServer()
to update the server preference value reported by "getserverprefs"
in addition to cm_ChangeRankVolume() or cm_ChangeRankCellVLServer().
Change-Id: Iacd8d30865286c39a7cc02e2f659b8c684f8f4a4
Reviewed-on: http://gerrit.openafs.org/8328
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Tested-by: Jeffrey Altman <jaltman@your-file-system.com>
cm_Analyze() was not marking the cm_ServerRef_t reference to
a volume instance as srv_offline in response to a VOFFLINE error.
As a result the same volume instance is tried again and again.
Change-Id: Ic467f41e96408281e6251a796d2dfba3245bb023
Reviewed-on: http://gerrit.openafs.org/8326
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
This reverts commit f3f282265a.
Returning STATUS_MEDIA_WRITE_PROTECTED in preference to
STATUS_OBJECT_NAME_COLLISION when the file results in silent
failures by some applications (ie, Firefox.exe) when the
first directory in the path below the share name is the
root of a .readonly volume.
FIXES 131416
Change-Id: I342d9ff09ef68615371cf9d372f38fac854ed6c0
Reviewed-on: http://gerrit.openafs.org/8325
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Remove any occurences of
# ifdef RX_ENABLE_LOCKS
MUTEX_ENTER(&mutex)
# endif
and similar for MUTEX_INIT, MUTEX_DESTROY and MUTEX_EXIT, as all of
these operations are no-ops when RX_ENABLE_LOCKS isn't defined.
Change-Id: Ic0f27b42d56ae4362ff095f1f08a06575c4ca2c1
Reviewed-on: http://gerrit.openafs.org/8293
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Get rid of the AFS_GLOBAL_RXLOCK_KERNEL #define. RX used to have a
single global lock locking mode, but none of our kernel modules use
it any more. In fact, AFS_GLOBAL_RXLOCK_KERNEL is now only defined
when RX_ENABLE_LOCKS is also defined. Simplify the code by renaming
all of the occurrences of AFS_GLOBAL_RXLOCK_KERNEL as RX_ENABLE_LOCKS,
and remove any cases where we're now doing unecessary tests
Change-Id: I061d8d364c61168370b223cdac48ad161f0c9d74
Reviewed-on: http://gerrit.openafs.org/8292
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Use a single prototype for rxi_CheckCall in both the pthread and
lwp cases. Remove the #ifdef maze at the call sites, and take advantage
of the fact that MUTEX_EXIT reduces to an empty string in the lwp
case.
Change-Id: Iaa8c1b983f1c8372e9c2e1b90aaef25a2bc5f81f
Reviewed-on: http://gerrit.openafs.org/8291
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
We currently have
call = conn->call[channel]
if (call) {
...
} else {
call = conn->call[channel]
if (call) {
...
}
}
As we don't drop (or acquire) any locks between the first and the
second check of call, there's no way that the result can be different
from the first time we checked. So just get rid of the uneccessary
code, and reindent the following block to match.
Change-Id: If21a1d0af461fe0c0651e713dfb99a7c5f01cba4
Reviewed-on: http://gerrit.openafs.org/8290
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
The call->bytesSent and call->bytesRcvd counters are only manipulated
by the application thread in running calls. Move them into the app-only
section of the call structure so this is clear.
Change-Id: Ib7929a8e34bcb70c8cb9c1f89544adce0d627299
Reviewed-on: http://gerrit.openafs.org/8288
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
