Check for kindlegen in configure and do nothing in the MOBI build
rule if the binary didn't exist.
This is still a bit of a hack since the rule will run with every
invocation of make. The target needs to be made conditional. But
at least this way make all in the documentation directory doesn't
fail.
Change-Id: I57f158929b3907678b9848a60edb9765136f7dbb
Reviewed-on: http://gerrit.openafs.org/5090
Reviewed-by: Derrick Brashear <shadow@dementix.org>
Tested-by: Derrick Brashear <shadow@dementix.org>
Depending on what generation method is used for the DocBook
documentation, additional build files may be created. One of those
(*.aux) will cause the build to break if one switches from
docbook2pdf to dblatex without deleting it. Update make clean
and .gitignore to remove and ignore these additional files.
Change-Id: I13cc8a3526bd7bc7c4c65cd7d2cd78b094398faa
Reviewed-on: http://gerrit.openafs.org/5089
Tested-by: Derrick Brashear <shadow@dementia.org>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
.epub is generated using dbtoepub which is still considered alpha
software apparently and installed in a non-standard place. for now,
use the docbook stylesheet location to find it. .mobi is generated
using kindlegen from the .epub in order to have a real toc.
there is some preprocessing with a custom stylesheet to make
things "look right". see mobi-fixup.xsl.in
Change-Id: Ice92e701e2f921e70c0f98683b5e9ab44a347e3b
Reviewed-on: http://gerrit.openafs.org/4887
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
index.html might not be built if you are building anything other than
the html/chunk.xsl but in general this is better than before.
Change-Id: I2e1b98c8a3fce65cb702274d5e276989031e338b
Reviewed-on: http://gerrit.openafs.org/4822
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Reviewed-by: Jeffrey Altman <jaltman@openafs.org>
It would seem xsltproc -> fop -> pdf is the "modern" way to generate
pdf from docbook now. The hard part is finding the stylesheets.
This should work for fedora, sles and debian. Additionally, it brings
some consistency--xsltproc for all the conversions. You can still
override via configure options if you prefer something else.
Change-Id: Id779e9473a6759daddc9a61be714109b27da980e
Reviewed-on: http://gerrit.openafs.org/4821
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Reviewed-by: Jeffrey Altman <jaltman@openafs.org>
"Empty" <anchor> entities seem to trigger a bug in fop. These are
easily converted to reference on the containing block. Additionally,
<indexterm>'s seem to need to be inside a non-structural entity (like
a <para>) in order to determine their page number/location correctly.
Change-Id: I2ab577f6ba8989685257fb9429e00a71dd51075c
Reviewed-on: http://gerrit.openafs.org/4812
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@openafs.org>
configure should attempt to find the XML tools we need to process
the documentation. if it can't, it should provide a safe default.
still allow the user to override via command line.
Change-Id: Ifaf3a5b090e93858c3d3c88363760c508030db90
Change-Id: Ib9558c37b04a4533e91b172a2a62039e4ed06d6f
Reviewed-on: http://gerrit.openafs.org/4766
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Simon Wilkinson <sxw@inf.ed.ac.uk>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
The environment variable CYGWIN (starting with cygwin 1.7.1) is
now used by CYGWIN to set configuration parameters for the cygwin
runtime library. OpenAFS used it to indicate the location of the
Cygwin install directory. Since there is a conflict, rename CYGWIN
to CYGWINDIR.
Change-Id: I98f6a7095ede4c6a91dd71d48312b0d1a55b8091
Reviewed-on: http://gerrit.openafs.org/4629
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@openafs.org>
Document the behavior and potential problems with granting 'il' rights
to create dropboxes. Do this in the manpage for 'fs setacl' and
chapter 4 of the User Guide.
Change-Id: Ic4e8ee016290080d78037a5c2c3802ce4e2e342c
Reviewed-on: http://gerrit.openafs.org/3977
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Add a "check" rule to each of the docbook directories
that uses xmllint.exe (from Cygwin) to validate the
docbook source against the DTD. Validation failures
will halt the build.
Change-Id: Ifcfcab11d5077381bfe7fa5e3767070a8d55cb21
Reviewed-on: http://gerrit.openafs.org/2391
Reviewed-by: Russ Allbery <rra@stanford.edu>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Reviewed-by: Jeffrey Altman <jaltman@openafs.org>
Tested-by: Jeffrey Altman <jaltman@openafs.org>
Make the computation of the docbook stylesheet location
based upon testing for directory existence now that versions
of cygwin 1.7.2 and place the stylesheets in a new location.
Change-Id: I844ae35a34eab73ee033bba875e68f71dc54f26b
Reviewed-on: http://gerrit.openafs.org/1702
Reviewed-by: Jeffrey Altman <jaltman@openafs.org>
Tested-by: Jeffrey Altman <jaltman@openafs.org>
This patchset contains updates to the OpenAFS UserGuide that
explains how to authentication OpenAFS using kinit/aklog
and uses language describing Kerberos outside the context
of the kaserver. References to applications such as telnet
have been replaced with more modern equivalents such as ssh.
Change-Id: Ifae779b04a26beb9be9cf58b450958acdc477c06
Reviewed-on: http://gerrit.openafs.org/1521
Tested-by: Jeffrey Altman <jaltman@openafs.org>
Reviewed-by: Jeffrey Altman <jaltman@openafs.org>
Many Windows files were not included in the .gitignore files.
Many directories did not have .gitignore files at all.
Add and update where required.
LICENSE IPL10
Reviewed-on: http://gerrit.openafs.org/103
Verified-by: Simon Wilkinson <sxw@inf.ed.ac.uk>
Reviewed-by: Simon Wilkinson <sxw@inf.ed.ac.uk>
Verified-by: Jeffrey Altman <jaltman@openafs.org>
Reviewed-by: Jeffrey Altman <jaltman@openafs.org>
Now we're in git we don't need any cvsignore files any more...
Reviewed-on: http://gerrit.openafs.org/1
Verified-by: Derrick Brashear <shadow@gmail.com>
Reviewed-by: Derrick Brashear <shadow@gmail.com>
Revise our git ignores to match the current state of the tree, and include
entires in the top level for all of the 'dest' directories for all of the
architectures we claim to support.
Reviewed-on: http://gerrit.openafs.org/2
Reviewed-by: Derrick Brashear <shadow@gmail.com>
Verified-by: Simon Wilkinson <sxw@inf.ed.ac.uk>
LICENSE MIT
Replace version info in the DocBook files with a new ENTITY "version"
associated with a local "version.xml" file which contain a <revision>
tag for the current release.
The version.xml file should be autogenerated by the Makefile system.
LICENSE MIT
Standardize the UNIX Makefiles for all of the DocBook guides. Remove the
rest of the generated files and switch to xsltproc and dblatex for the
document generation in all cases. Fix a few DocBook errors by removing
the contents of the <index> tag and removing the unknown <pubsnumber> tag
in the <revision> field.
LICENSE IPL10
FIXES 124760
Remove generated HTML from the respository
Update XML to support autogeneration of Index files via XSLT
Add graphics referenced by generated HTML output
Add top level index.html used by the docs.openafs.org web site.
Add NTMakefile for AdminGuide, QuickStartUnix, and UserGuide
that utilizes XSLT to generate Windows HTMLHelp (.CHM) and
website appropriate HTML output.
In AdminGuide and UserGuide, relabel the documentation as OpenAFS
instead of IBM AFS. Create a new revision entry for the OpenAFS
docs.
Incorporate updates to QuickStartUnix Appendix A
