Correct the fs manpage to show that 'fs diskfree' shows a header
called 'total' to represent the total disk space, not 'kbytes'.
Change-Id: Id827ec81dcfd79ab28eed3bc392524a378f0069d
Reviewed-on: http://gerrit.openafs.org/2313
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
When a volume is locked in the VLDB, we are given flags for the reason
why the lock was set. Make vos interpret and output this reason.
This adds output to any vos command that previously printed that a
volume was LOCKED. It now outputs, for example,
Volume is currently LOCKED
Volume is locked for a delete/misc operation
Change-Id: Ie3a6f804a3e3a551840975c3689b24d3916891df
Reviewed-on: http://gerrit.openafs.org/2235
Tested-by: Andrew Deason <adeason@sinenomine.net>
Reviewed-by: Jason Edgecombe <jason@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
The afsd man page says that -fakestat only fakes stat information for
cross-cell mount points. Technically it fakes stat information for all
cellular mount points, local or foreign. Most people shouldn't care,
but note the difference, since some places do have local cellular
mount points.
Change-Id: I9bc61a0284b7d04439578a4fc5a6adf791217463
Reviewed-on: http://gerrit.openafs.org/1979
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Reviewed-by: Russ Allbery <rra@stanford.edu>
Tested-by: Russ Allbery <rra@stanford.edu>
This is another patch in the series to provide manpages for
dafs-related commands.
Most (if not all) documentation is coming from source
documentation and DAFS articles/presentations.
The primary motivation behind this is to comply with Debian
guidelines requiring all binaries to have respective manpages.
This patch has been sitting here for months, so it's good time
to finally submit it.
Note that fssync-debug also supports some vcg* commands, for
which I was not able to find any documentation I could use.
So, they are still left to be documented.
Change-Id: I9d067766e2a90b26646edc87f15a4f533c5c8d44
Reviewed-on: http://gerrit.openafs.org/2220
Reviewed-by: Russ Allbery <rra@stanford.edu>
Tested-by: Russ Allbery <rra@stanford.edu>
if an admin specifies -dynroot-sparse (instead of dynroot) come up
with just local cell and cell aliases showing. cell list
is configured as normal. fs newcell works as normal.
document it.
Change-Id: Ie644ed0f9923a85da5451eafaa114ddf36daa671
Reviewed-on: http://gerrit.openafs.org/2217
Reviewed-by: Andrew Deason <adeason@sinenomine.net>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
Document the -host and -uuid flags to vos listaddrs. They were mentioned
in the SYNOPSIS, but not in the OPTIONS section of the manual page.
Change-Id: I96e6b67b7239d9455060fd0c76b8d44f41a010a2
Reviewed-on: http://gerrit.openafs.org/2083
Reviewed-by: Russ Allbery <rra@stanford.edu>
Tested-by: Russ Allbery <rra@stanford.edu>
Document that salvager creates separate logs per partition when doing
a full server salvage and then appends them all to SalvageLog when it
completes.
Change-Id: I2ffa8c79ef83b590f90bb014fc318559deae7113
Reviewed-on: http://gerrit.openafs.org/2035
Reviewed-by: Russ Allbery <rra@stanford.edu>
Tested-by: Russ Allbery <rra@stanford.edu>
For each command only useful with the Authentication Server, add
warnings that the Authentication Server is obsolete and will be
removed in a future version of OpenAFS. Encourage people who care
to update uss to work with a modern Kerberos KDC, recommend kinit
and aklog or klog.krb5 over klog, and warn that klog will be of
limited use without an Authentication Server.
Change-Id: Idc78ba548134b83ac1eea0fb81a5bc38a431bb38
Reviewed-on: http://gerrit.openafs.org/2052
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
Change references to the documentation sets that we still ship to
reference the OpenAFS manuals instead of the IBM AFS manuals. Remove
references to the IBM AFS/DFS Migration documentation, since that
doesn't appear to be available anywhere any more, replacing them where
relevant to more generic references to the DFS documentation. Add
links to docs.openafs.org for mentions of the manuals in SEE ALSO, and
standardize on one link format. Replace a few references to the IBM
AFS Release Notes with the actual information in those notes, or drop
the reference if it doesn't seem particularly useful.
Change-Id: Ie9666842f1315891c6a9c37c0424200f4b78bff7
Reviewed-on: http://gerrit.openafs.org/2031
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
salvager and salvageserver's documentation of -oktozap says to not use
without consultation with AFS Development or Product Support, left over
from the IBM product. Remove those references and add a caution more
in line with open source.
Change-Id: I136dc145caf3e8e3a992c239e1a46d86f96580ed
Reviewed-on: http://gerrit.openafs.org/2030
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
Reviewed-by: Jeffrey Altman <jaltman@openafs.org>
The -rebuildDB flag was documented to rebuild the Protection Database at
startup, but it was accepted and ignored in the ptserver source, doing
nothing. Remove the documentation and the option recognition in ptserver.
Change-Id: I36f30f38464b602cb4739a958663a6feb5fe27bf
Reviewed-on: http://gerrit.openafs.org/2029
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
-fastKeys wasn't accepted by the kaserver binary, but was still
mentioned in the usage message and the kaserver man page. Remove
the remnants of the flag.
Change-Id: Ifb3ae49ea0cab80c325a77b0eb1062944697b53d
Reviewed-on: http://gerrit.openafs.org/2028
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
Adds new command line option to scout so users can set the
number of characters to display without truncating.
Change-Id: I69f159549d7f5b4cfee26c276ad34705f504ee2b
Reviewed-on: http://gerrit.openafs.org/1951
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Reviewed-by: Russ Allbery <rra@stanford.edu>
Tested-by: Russ Allbery <rra@stanford.edu>
Mention in the fs getserverprefs and fs setserverprefs documentation
that VL servers may also come from DNS AFSDB and SRV records. Document
that SRV record information is not (yet) properly used.
Change-Id: I223efedf4d00ac1b57b3dce74a807790691abdbf
Reviewed-on: http://gerrit.openafs.org/2015
Tested-by: Russ Allbery <rra@stanford.edu>
Tested-by: Derrick Brashear <shadow@dementia.org>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Clearly prefer asetkey to bos addkey in the KeyFile, bos addkey, and
bos listkeys man pages. Reference asetkey list and asetkey delete as
alternatives to bos listkeys and bos removekey. Distinguish between
Authentication Server cells and Kerberos v5 cells and mention the
preferred afs/<cell> principal format. Add some cautions around
matching enctypes and salts when synchronizing keys with a v5 KDC.
Update man-pages/README for completion of this task, clean up some
other wording, and remove some other now-irrelevant information.
Change-Id: I29b83a61cbdb08de508bdb313524a307e385044b
Reviewed-on: http://gerrit.openafs.org/1938
Reviewed-by: Jeffrey Altman <jaltman@openafs.org>
Reviewed-by: Andrew Deason <adeason@sinenomine.net>
Tested-by: Russ Allbery <rra@stanford.edu>
Reviewed-by: Russ Allbery <rra@stanford.edu>
Examples of the pts mem -expandgroups and -supergroups
options for the man page.
Change-Id: Idea0509797212397eff87aa5975eaf5364c8414c
Reviewed-on: http://gerrit.openafs.org/1896
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
If --enable-fuse-client is passed to configure and afsd.fuse is built,
install it into the same directory as afsd and install afsd.fuse.8 as a
symlink to the afsd.8 man page. Add documentation of afsd.fuse to the
afsd man page.
Change-Id: I7d0cd3992a8466e626af2191c713e5623cc40d84
Reviewed-on: http://gerrit.openafs.org/1792
Tested-by: Russ Allbery <rra@stanford.edu>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
Add a caution explaining how the file server addresses are registered
and pointing users at NetInfo and NetRestrict plus restarting the file
server for the normal case.
Mention what version of OpenAFS introduced this command. Drop the note
about the version of OpenAFS that added the -encrypt flag, since the
whole command is newer than that.
Reference vos listaddrs -printuuid specifically to get the UUID.
General formatting and wording cleanup: use terminology more consistently,
continue a long example line, wrap long lines, fix a spelling error, and
add cross-references to NetInfo and NetRestrict.
Change-Id: Idd6175339dc0feb1b777963bbb09731e42b83522
Reviewed-on: http://gerrit.openafs.org/1787
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
The vos setaddrs command sets the IP addresses for a server entry
in the Volume Location Database (VLDB). Specify one or serveral hosts.
All existing hosts in the VLDB entry are replaced with the new entries
on the command line.
Change-Id: I3c26e49c4a6e2aebae363017d074329ac265132a
Reviewed-on: http://gerrit.openafs.org/1744
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
Improve support for supergroups in the pts membership command
with a new option called -expandgroups. This option will
recursively show the complete membership of users and groups.
The expanded members of a group are all the users which are
members of all of the group's sub-groups. The expanded groups
of a user are all the groups which are supergroups of the
users's groups.
Change-Id: I811a4e5e73632e5e205fe10f3f3a36a98464d49e
Reviewed-on: http://gerrit.openafs.org/1601
Reviewed-by: Andrew Deason <adeason@sinenomine.net>
Tested-by: Andrew Deason <adeason@sinenomine.net>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
Improve pts support for supergroups with an option to list the
supergroups of a group.
Change-Id: I4fe1cd131cd334386bc16ce733e01e29e0511d4f
Reviewed-on: http://gerrit.openafs.org/1600
Reviewed-by: Andrew Deason <adeason@sinenomine.net>
Tested-by: Andrew Deason <adeason@sinenomine.net>
Reviewed-by: Simon Wilkinson <sxw@inf.ed.ac.uk>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
It's possible to use AFSDB records only to locate the VLDB servers but
still list the cell in the client CellServDB so that the client is
aware of it and populates it into dynroot. Describe doing this in the
man page.
Change-Id: I714cd515dc4b72a6e358bbd8f9332d4ddce5a5fc
Reviewed-on: http://gerrit.openafs.org/1710
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
Add a caution to the fileserver man page explaining that traditional
and demand-attach require different configurations, and also mention
that there are two different server implementations. Add an example
of a bos create command for creating a demand-attach File Server to
the fileserver man page.
Add a caution to the bos create man page that a traditional fs node
won't work with demand-attach and vice versa. Document the necessary
arguments for the dafs type. Clarify in EXAMPLES which bos create
commands are traditional and which are demand-attach. Add an example
of changing from a traditional to a demand-attach configuration.
Change kaserver to ptserver in the example of a simple process.
Change-Id: I4077246b69edf6e1ddc7c0761ac8e1006d471c24
Reviewed-on: http://gerrit.openafs.org/1707
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
The option was given correctly in SYNOPSIS but not in the OPTIONS section.
Thanks, Rod Widdowson.
FIXES 126771
Change-Id: Ibd9694c066b6750ad04273c22e66c84fb7b4a1c6
Reviewed-on: http://gerrit.openafs.org/1589
Reviewed-by: Rod Widdowson <rdw@steadingsoftware.com>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
Added some text that the CellAlias file is only used on Unix.
LICENSE BSD
Change-Id: I913d6a0774240ffc16cf92cfa92c4b2d06f41fd6
Reviewed-on: http://gerrit.openafs.org/1307
Tested-by: Jason Edgecombe <jason@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@openafs.org>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
Write some documentation for the -files and -excessive options to
fs getcacheparms
Change-Id: I769f8c0cf6d9d100a1687ae73a337132befb2449
Reviewed-on: http://gerrit.openafs.org/1217
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
Change the default so new installations of the bosserver have
no weekly restarts. Update the manpage and XML documentation to
reflect this change.
FIXES 126138
Change-Id: Ic22b750a602f6d2a22be881f5e1b04cd4fa132ae
Reviewed-on: http://gerrit.openafs.org/1097
Reviewed-by: Russ Allbery <rra@stanford.edu>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
Remove the #ifdef's around the bos restricted mode code. This makes
restricted mode available as part of the standard build, but a server
will not go into restricted mode unless the relevant command line
options are specified, or bos setrestricted is run.
Document bos_setrestricted and bos_getrestricted, and the new
'-restricted' command line option. Add a note to the man pages of
all of the commands whose behaviour is affected by restricted mode.
Add 'setr' and 'getr' aliases for setrestart and getrestart so that
these documented shortcuts continue to work (otherwise they'd be
ambiguous against setrestricted and getrestricted). Note that
setre, setres, and setrest will not work once this patch is applied.
Change-Id: Ie69d21493ea5f78757f0a3d478de43fdaabd3c31
Reviewed-on: http://gerrit.openafs.org/1028
Reviewed-by: Michael Meffie <mmeffie@sinenomine.net>
Reviewed-by: Andrew Deason <adeason@sinenomine.net>
Tested-by: Andrew Deason <adeason@sinenomine.net>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
vos dump -verbose sends its logging to stderr, not to stdout (where
it would potentially collide with the dump data itself).
FIXES 124911
Change-Id: I515c50df59d2f376787969df59b6e01e244ecbc7
Reviewed-on: http://gerrit.openafs.org/1044
Reviewed-by: Russ Allbery <rra@stanford.edu>
Tested-by: Russ Allbery <rra@stanford.edu>
Add a command to vos to explicitly end volume transactions. These can
happen if (for example) we segfault or the user ctrl-C's in 'vos'
before/after a volume operation, but before we AFSVolEndTrans.
Change-Id: Ie34ee1fdff917b56900f456c7cf8b1329533a7da
Reviewed-on: http://gerrit.openafs.org/870
Reviewed-by: Dan Hyde <drh@umich.edu>
Reviewed-by: Alistair Ferguson <alistair.ferguson@mac.com>
Tested-by: Alistair Ferguson <alistair.ferguson@mac.com>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
Fix the pt_util manpage to reflect the fact that it is run on database
servers, not fileservers.
Change-Id: If2a8e5b65ef925c50eb9bfebea4e0d30c20f0970
Reviewed-on: http://gerrit.openafs.org/901
Tested-by: Jeffrey Altman <jaltman@openafs.org>
Reviewed-by: Jeffrey Altman <jaltman@openafs.org>
Make ihandle file descriptor cache parameters tunable, and accommodate
platforms where max open files is large. Expand the fd cache hash table
to 2048 entries. Raise fd cache size automatically to match configured
number of lwps.
NOTE: This code has been tested on Centos 5.3 x86_64, on VMWare, 2 physical,
2 logical CPUs (in tandem with viced_more_threads).
LICENSE BSD
Change-Id: If68eda6e1c955e026b250ca52bddf0b8383959c9
Change-Id: I5fbbec95523ea9cd9ff42dcf43f17db94c7bb161
Reviewed-on: http://gerrit.openafs.org/584
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
Cache parameters are discussed in two locations in the afsd man page,
and the first copy had not been updated for the new auto-tuning of
the chunk size and the stat parameter. Fix both.
Note that the firewall requirements for klog only apply if you're using
kaserver and klog. Kerberos v5 has its own requirements, but this is not
the place to talk about them.
Change-Id: I9cdaaa71351a64cecc1b6904efba87d4871d42fb
Reviewed-on: http://gerrit.openafs.org/798
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
9d396c4916 (from 2005) introduced
autotuning for afsd, and changed some of the defaults which aren't
autotuned. Update the afsd man page to reflect the autotuning, and
the new defaults.
Change-Id: Iea2035743cb45cca1c249bc2e838405039ad7d3a
Reviewed-on: http://gerrit.openafs.org/744
Tested-by: Derrick Brashear <shadow@dementia.org>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
A typo in c717fcd32c removed the = before
the first head1 in vos_remsite.pod. Put it back.
Reviewed-on: http://gerrit.openafs.org/612
Tested-by: Derrick Brashear <shadow@dementia.org>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Larger collection of all vos suite commands, including but
not limited to:
-- documented all commands / options, verified against both 1.4 and 1.5 tree
(including the common -encrypt/-noresolve options)
-- correct order, POD formatting and synopsis for all commands' options
-- shorthand synopsis provided for all commands that missed it, with proper
non-ambiguous command abbreviations of all options
-- POD synopsis formatted to 80-columns in commands where it was running over
-- for newer options, documented which OpenAFS version they became available
-- proper manpage links using L<> in vos.pod
Reviewed-on: http://gerrit.openafs.org/609
Tested-by: Derrick Brashear <shadow@dementia.org>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
