This commit adds the afsd -inumcalc command line switch to specify the
inode number calculation method in a platform neutral way.
Inode numbers reported for files within the AFS filesystem are generated
by the cache manager using a calculation which derives a number from a
FID. Long ago, a new type of calculation was added which generates inode
numbers using a MD5 message digest of the FID. The MD5 inode number
calculation variant is computationally more expensive but greatly
reduces the chances for inode number collisions.
The MD5 calculation can be enabled on the Linux cache manager using the
Linux sysctl interface. Other than the sysctl method of selecting the
inode calculation type, the MD5 inode number calculation method is not
specific to Linux.
This change introduces a command-line option which accepts a value to
indicate the calculation method, instead of a simple flag to enable MD5
inode numbers. This should allow for new inode calculation methods
in the future without the need for additional afsd command-line flags.
Two values are currently accepted for -inumcalc. The value of 'compat'
specifies the legacy inode number calculation. The value 'md5' indicates
that the new MD5 calculation is to be used.
Reviewed-on: https://gerrit.openafs.org/11855
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
(cherry picked from commit 0028ea92ad3e7aac6a4c51f63703a4d9d7b9dcd6)
Change-Id: I9021eea9f64c754157061d039f63b6f744ec2ec5
Reviewed-on: https://gerrit.openafs.org/12608
Reviewed-by: Mark Vitale <mvitale@sinenomine.net>
Reviewed-by: Stephan Wiesand <stephan.wiesand@desy.de>
Tested-by: Stephan Wiesand <stephan.wiesand@desy.de>
What's displayed by fs wscell is not necessarily the current content
of ThisCell, but that at the time of starting the client. Say so.
FIXES 133339
Reviewed-on: https://gerrit.openafs.org/12537
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
(cherry picked from commit bd15a5f56fde98983464acf5fd4cdd731d206d9f)
Change-Id: I47d7b92488b1166934a1704765c0f1e914a178a8
Reviewed-on: https://gerrit.openafs.org/12559
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Stephan Wiesand <stephan.wiesand@desy.de>
Mention the vlserver -d option can be used to set the initial logging
level.
Thanks to Mark Vitale for the suggestion.
Reviewed-on: https://gerrit.openafs.org/12324
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
(cherry picked from commit f5f057ce8198480fb9c67f2a8c8eee906f8a7c4a)
Change-Id: Iaa0f10d020d3993fe92690c860cdad03605d31ec
Reviewed-on: https://gerrit.openafs.org/12477
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Stephan Wiesand <stephan.wiesand@desy.de>
Commit f085951d39c0d6c1e6a626177c30235704317600 introduced an error in
the bos getlog helpfile.
Modify the helpfile to describe the actual restrictions imposed by
-restricted mode.
Reviewed-on: https://gerrit.openafs.org/12454
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Tested-by: Benjamin Kaduk <kaduk@mit.edu>
(cherry picked from commit 3af0460a4a6d7bf22e1789fd9e375659e20c3a55)
Change-Id: Ifa544c322e67da712a0bc96b3797e51786e4d399
Reviewed-on: https://gerrit.openafs.org/12476
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Mark Vitale <mvitale@sinenomine.net>
Reviewed-by: Stephan Wiesand <stephan.wiesand@desy.de>
Though it's very unlikely that someone would actually want to
set up a new kaserver installation, if we have documentation for
it, it ought to at least do what it claims to do.
Thus, change kinit to klog where it was intended.
Reported by Karl-Philipp Richter.
FIXES 133043
Reviewed-on: https://gerrit.openafs.org/12286
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
(cherry picked from commit 4bd716223492aec23599a5ac01bce3cc47160bfd)
Change-Id: I0390a260e53a978e5a45aaff19b832c2d4dc4f9b
Reviewed-on: https://gerrit.openafs.org/12304
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Mark Vitale <mvitale@sinenomine.net>
Reviewed-by: Stephan Wiesand <stephan.wiesand@desy.de>
"local" links to section heads inside the same pod page should be written
L</OPTIONS> instead of L<OPTIONS>. the other broken links are assorted
typos and capitalization changes.
Reviewed-on: http://gerrit.openafs.org/4831
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Reviewed-by: Ken Dreyer <kdreyer@usgs.gov>
Reviewed-by: Jeffrey Altman <jaltman@openafs.org>
(cherry picked from commit 6770c6c411f2766471b4dc07bd7c66794f95ba63)
Change-Id: Id53b3ad6c2f8e0ec00fabf733b2b2052495b3f27
Reviewed-on: https://gerrit.openafs.org/11675
Reviewed-by: Chas Williams <3chas3@gmail.com>
Reviewed-by: Michael Meffie <mmeffie@sinenomine.net>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Stephan Wiesand <stephan.wiesand@desy.de>
Print a warning message if -settime is given and update the afsd man
page to declare that -settime is deprecated.
Thanks to Stephan Wiesand for suggesting this change. This is a 1.6.x
specific change.
Change-Id: Iab3f9aa602552e88d74b04e4628c7af13e0439e3
Reviewed-on: https://gerrit.openafs.org/12207
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Michael Meffie <mmeffie@sinenomine.net>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Reviewed-by: Stephan Wiesand <stephan.wiesand@desy.de>
Update the man page to reflect the current access rights required for fs
examine. Historically, fs examine required read access on the root
vnode of the volume housing the directory or file being examined. This
access check was relaxed in commit d2d591caf2c9b4cf2ebae708cc9b4c8b78ca5a5a,
since the information returned by the file server is already available
anonymously by other means.
Reviewed-on: https://gerrit.openafs.org/12223
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Tested-by: Benjamin Kaduk <kaduk@mit.edu>
(cherry picked from commit f99c1ec32bb6e8d31ac517173ff7502dbd85aa05)
Change-Id: I580d1e0cab7f823ac1932f99066495cef9e2410a
Reviewed-on: https://gerrit.openafs.org/12224
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Reviewed-by: Stephan Wiesand <stephan.wiesand@desy.de>
These options were copied from the salvager man page and are not implemented by
the salvageserver.
Reviewed-on: http://gerrit.openafs.org/11817
Reviewed-by: Perry Ruiter <pruiter@sinenomine.net>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
(cherry picked from commit fb91be7759605bb4ea5b4dd3ce089df1141c431a)
Change-Id: I615a9a972d5a4a798ba9caae2ee7fd1562081a56
Reviewed-on: http://gerrit.openafs.org/12120
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Chas Williams <3chas3@gmail.com>
Reviewed-by: Stephan Wiesand <stephan.wiesand@desy.de>
Add the missing -syslog and -syslogfacility options to
the salvageserver man page.
Reviewed-on: http://gerrit.openafs.org/11816
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
(cherry picked from commit e4bae29efc3d370d1eaf6d954c63c324094c48e5)
Change-Id: I7501b801a49219a1a47d98516426661ad32a8102
Reviewed-on: http://gerrit.openafs.org/12112
Reviewed-by: Mark Vitale <mvitale@sinenomine.net>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Stephan Wiesand <stephan.wiesand@desy.de>
Document the built-in version sub-command which displays
the OpenAFS version string. This sub-command is provided
by the cmd library.
Document the switch style -version option provided by the cmd
library for the initcmd based commands: afsmonitor, scout,
xstat_fs_test, and xstat_cm_test.
Reviewed-on: http://gerrit.openafs.org/11161
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
(cherry picked from commit ed52ea68c661a7428baeddeca2d95972fe3fe618)
Change-Id: Ie7a5194b8c407c8899ae71f168dfbaf5b47a3ae5
Reviewed-on: http://gerrit.openafs.org/12096
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Mark Vitale <mvitale@sinenomine.net>
Reviewed-by: Stephan Wiesand <stephan.wiesand@desy.de>
Introduce the vos remaddrs sub-command for removing multi-homed server
entries from the vldb. The remaddrs sub-command completes the listaddrs
and setaddrs command suite and allows vos changeaddr to be deprecated
completely.
Reviewed-on: http://gerrit.openafs.org/11606
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Chas Williams <3chas3@gmail.com>
Reviewed-by: Daria Brashear <shadow@your-file-system.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
(cherry picked from commit d1d411576cf39c4bc55918df0eb64327718d566c)
Change-Id: I427077559509c9cb658a6758d8b371b744e6c643
Reviewed-on: http://gerrit.openafs.org/12092
Reviewed-by: Mark Vitale <mvitale@sinenomine.net>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Reviewed-by: Stephan Wiesand <stephan.wiesand@desy.de>
Add a client side check to vos changeaddr -oldaddr -newaddr
to refuse to change multihomed server entries, unless -force
is given.
Reviewed-on: http://gerrit.openafs.org/11638
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
(cherry picked from commit 656aaacd01a90f658a5126111af9988fa1854dec)
Change-Id: I4eb7e2b3a2e027b5e1368298a274b0328c8b1343
Reviewed-on: http://gerrit.openafs.org/12087
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Reviewed-by: Mark Vitale <mvitale@sinenomine.net>
Reviewed-by: Stephan Wiesand <stephan.wiesand@desy.de>
Since OpenAFS 1.0 bosserver automatically puts itself into the
background and removes it's controlling terminal. Update the examples in
the Admin and Quick Start Guides to remove the unneeded '&' on the
command line to start the bosserver.
Reviewed-on: http://gerrit.openafs.org/11906
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Tested-by: Jeffrey Altman <jaltman@your-file-system.com>
(cherry picked from commit 4ef47f787a64dc5c8ebb73a454b0851c86d7c06b)
Change-Id: Ife77c07bb5a00244ef346c0eb70782685c2bb2b1
Reviewed-on: http://gerrit.openafs.org/11932
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Chas Williams <3chas3@gmail.com>
Reviewed-by: Perry Ruiter <pruiter@sinenomine.net>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Reviewed-by: Stephan Wiesand <stephan.wiesand@desy.de>
We have previously documented that volumes over 2TB can result in
inaccuracies, but this documentation does not say how the 'partition'
field in "fs listquota" can be inaccurate. It is confusing to see a
usage of 0% for a partition that you know is being used, so try to
briefly explain in what way this field is inaccurate.
The reason we _under_-report the partition usage is that the
fileserver actually gives back PartBlocksAvail and PartMaxBlocks (not
"blocks used" and "blocks total"). So 1TB used and 4TB total is
truncated to 2TB and given back as 2TB free and 2TB total. One we hit
3TB used we'll report it as 1TB free 2TB total (50%) when the actual
usage is 75%.
Reviewed-on: http://gerrit.openafs.org/11245
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
(cherry picked from commit cd8f24d9a1ba8563c6bef2b8d30885a753e8d30c)
Change-Id: I2bd72cca994414a88073d26d44bef49e9cac3be1
Reviewed-on: http://gerrit.openafs.org/11626
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Perry Ruiter <pruiter@sinenomine.net>
Reviewed-by: Chas Williams <3chas3@gmail.com>
Reviewed-by: Stephan Wiesand <stephan.wiesand@desy.de>
The krb5_524_conv_principal() function should fail whenever the Kerberos
v5 principal cannot safely be mapped onto a Kerberos v4 principal, and
does fail on some Kerberos v5 principals used in real-world AFS
deployments.
Prior to this patchset a failure was treated as a fatal error that
in turn prevents an AFS token from being generated or set into the
cache manager.
Prior to b1f9b4cb5dd295162ae51704310e9d6058008f0a the
krb5_524_conv_principal() function wasn't used and a local client
mapping was created. b1f9b4cb5dd295162ae51704310e9d6058008f0a
replaced the local mapping with the krb5 function because the local
mapping could be wrong and confusing.
The krb5_524_conv_principal() function as applied to AFS tokens is
just a local guess. How the username in the token is interpreted by
the AFS server is up to the server.
krb5_524_conv_principal() is only used for Krb5 native tokens. For Krb4
tokens the krb5_524_convert_creds() function is used to obtain both the
Kerberos v4 ticket and the converted names from the KDC. Many
organizations used the krb524d service to perform name translation. When
the krb524d service is used, the name translation is performed by the KDC,
so there is no local call to krb5_524_conv_principal() which might fail.
As a result, disallowing the use of a native Krb5 token due to a failed
local name translation is a needless loss of functionality; the local name
translation is not an essential part of obtaining a token.
This patchset modifies the behavior such that krb5_524_conv_principal()
errors are non-fatal.
1. If -noprdb is not specified the error message is generated
and a NULL username is used.
2. If the username is NULL the prdb lookup is disabled.
3. If the username is NULL the informational messages do not
include a username.
4. If the username is NULL the username info provided to the
cache manager in the token description is the nul string.
This patchset is an openafs-stable-1_6_x specific version of
the patch. The master version was submitted to
http://gerrit.openafs.org/#change,11542
Credit to Ben Kaduk for assistance with the wording of this commit
message.
Change-Id: If12ae69394321fa7b7a182c9db95716bc66e489c
Reviewed-on: http://gerrit.openafs.org/11538
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Reviewed-by: Stephan Wiesand <stephan.wiesand@desy.de>
These are new files and new content; fix the copyright notice and
license to reflect.
Reviewed-on: http://gerrit.openafs.org/11362
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Tested-by: Jeffrey Altman <jaltman@your-file-system.com>
(cherry picked from commit 1283226ccb638be47ead6cc4d9a47381aa6b08d1)
Change-Id: I4026bba6a10459ca0eb7b63666fe8e278949ca78
Reviewed-on: http://gerrit.openafs.org/11388
Reviewed-by: Andrew Deason <adeason@sinenomine.net>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Stephan Wiesand <stephan.wiesand@desy.de>
Provide a man page for the volscan utility
Reviewed-on: http://gerrit.openafs.org/10905
Reviewed-by: D Brashear <shadow@your-file-system.com>
Tested-by: D Brashear <shadow@your-file-system.com>
(cherry picked from commit a30b98c97d6fbf87018bcb6943e09c1c75a3918d)
Change-Id: I980dd7842bd1c606cb09ee838a584b83d004ccb1
Reviewed-on: http://gerrit.openafs.org/11280
Reviewed-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil>
Reviewed-by: Andrew Deason <adeason@sinenomine.net>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Stephan Wiesand <stephan.wiesand@desy.de>
For consistency, allow -sizeonly (all lowercase letters) to
request the size summary. The old option name, -sizeOnly is
available as an alias.
Define the command line option parameter positions and use
those to set and look up the options.
1.6 note: The libcmd in 1.6 lacks parameter aliases and offsets.
Instead we create params the normal way and make the offsets enum line
up with the default offsets. To get an alias for -sizeonly, we create
a new parameter that just does the same thing (P_SIZEONLY_COMPAT).
Reviewed-on: http://gerrit.openafs.org/4741
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
(cherry picked from commit 1a4262253e78aa7a4e8c58006abd3301f71bab89)
Change-Id: Ic630a7c0b29bd62525dd2211a7771c647e1be8df
Reviewed-on: http://gerrit.openafs.org/11258
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Andrew Deason <adeason@sinenomine.net>
Reviewed-by: Stephan Wiesand <stephan.wiesand@desy.de>
Accept a partition id for the -part option. For example, -part a
is the same as -part /vicepa.
Reviewed-on: http://gerrit.openafs.org/4739
Reviewed-by: Jeffrey Altman <jaltman@openafs.org>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
(cherry picked from commit 8fc3d6dfe196771a38f2bfe7275e90a73f742931)
Change-Id: I9a52dc881e6b77526656ca94e4f175241a79551b
Reviewed-on: http://gerrit.openafs.org/11257
Reviewed-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil>
Reviewed-by: Andrew Deason <adeason@sinenomine.net>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Stephan Wiesand <stephan.wiesand@desy.de>
Add the -emit option to the compile_et command to support parallel make.
The -emit option allows make to generate the header and the source files
independently, instead of building two files at the some time. This
avoids the issue where one command creates two separate files, which is
difficult to handle correctly for parallel makes.
Reviewed-on: http://gerrit.openafs.org/7921
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Marc Dionne <marc.c.dionne@gmail.com>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
(cherry picked from commit 9df43aacab0f311c15837b230761a11750f8b9cb)
Change-Id: Id560fcec356a4b36c0e311440f74a97a670c07d1
Reviewed-on: http://gerrit.openafs.org/11227
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Reviewed-by: Stephan Wiesand <stephan.wiesand@desy.de>
The man page documented the prefix option as -prefix; compile_et
supported only the short form -p.
Document and support both the long and short forms for the prefix
option; -p and -prefix.
Reviewed-on: http://gerrit.openafs.org/10721
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
(cherry picked from commit 37937a3e924eee7a09c7719ca6355703e65092e1)
Change-Id: I65b8d54bde89be85bd535d3a85fd2b22408bba39
Reviewed-on: http://gerrit.openafs.org/11225
Reviewed-by: Perry Ruiter <pruiter@sinenomine.net>
Reviewed-by: Stephan Wiesand <stephan.wiesand@desy.de>
Tested-by: Stephan Wiesand <stephan.wiesand@desy.de>
Document the -lang short form for -language.
Reviewed-on: http://gerrit.openafs.org/10720
Reviewed-by: Ken Dreyer <ktdreyer@ktdreyer.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
(cherry picked from commit 355ca7b20b8bb9f06b030be966311d4afb40ed00)
Change-Id: I26c56ac064968d65f06de9f34c50bc71d2208560
Reviewed-on: http://gerrit.openafs.org/11223
Reviewed-by: Stephan Wiesand <stephan.wiesand@desy.de>
Tested-by: Stephan Wiesand <stephan.wiesand@desy.de>
Fix two pod formatting errors and remove one trailing
whitespace characters.
Reviewed-on: http://gerrit.openafs.org/10719
Reviewed-by: Ken Dreyer <ktdreyer@ktdreyer.com>
Tested-by: Ken Dreyer <ktdreyer@ktdreyer.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
(cherry picked from commit de8ff76f8767246431115bf04a1475a0cf3ad28a)
Change-Id: Ie2da8d8bf55a6ef9a067be06eb6626fc3dfd57fc
Reviewed-on: http://gerrit.openafs.org/11222
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Perry Ruiter <pruiter@sinenomine.net>
Reviewed-by: Stephan Wiesand <stephan.wiesand@desy.de>
It is not always clear to users whether BosConfig.new is noticed
during an automatic restart, or if it requires stopping and starting
the bosserver. Slightly reword the relevant text and add a small note
that a "general restart" does cause BosConfig.new to be noticed, so
this is explicitly clear.
Reviewed-on: http://gerrit.openafs.org/11076
Reviewed-by: Andrew Deason <adeason@sinenomine.net>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
(cherry picked from commit 3946b50a7ecdfd34681ab471863929b2f82aff4b)
Change-Id: Ia630aec6ef5259fc3c3fd531fdf8fda8a4152c54
Reviewed-on: http://gerrit.openafs.org/11216
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Ken Dreyer <ktdreyer@ktdreyer.com>
Reviewed-by: Andrew Deason <adeason@sinenomine.net>
Reviewed-by: Stephan Wiesand <stephan.wiesand@desy.de>
vos convertROtoRW leaves the older RW copy on the original fileserver,
although it is no longer in the VLDB. Provide the user with some hints
regarding clean up.
Reviewed-on: http://gerrit.openafs.org/9408
Reviewed-by: Ken Dreyer <ktdreyer@ktdreyer.com>
Tested-by: Ken Dreyer <ktdreyer@ktdreyer.com>
(cherry picked from commit 279345c231d0a2d9f6e8c2f76a5347bafd40e70b)
Change-Id: Id273ab86bfe68f89ef629f0c4d839882852e09ab
Reviewed-on: http://gerrit.openafs.org/11126
Reviewed-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil>
Reviewed-by: Ken Dreyer <ktdreyer@ktdreyer.com>
Reviewed-by: Stephan Wiesand <stephan.wiesand@desy.de>
Tested-by: Stephan Wiesand <stephan.wiesand@desy.de>
Commit 070230ab76e1df338db3f2a7971111ca976a0c1a added documentation of
the mode parameter to bos setrestricted, claiming that the value 0 is
useless, and commit eee0bf5871944d919951cc8b7b4908ee909c3b62 added
documentation of the restrictmode entry in BosConfig, claiming that it
can only be set back to 0 with an editor. Both claims are wrong, since
bos setrestricted -mode 0 will do exactly that (if it succeeds, which
it only can if the server is running in unrestricted mode, which can
be achieved by sending it the FPE signal). Fix the man pages
accordingly.
Reviewed-on: http://gerrit.openafs.org/10885
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Reviewed-by: Marc Dionne <marc.c.dionne@gmail.com>
Reviewed-by: Andrew Deason <adeason@sinenomine.net>
Reviewed-by: Michael Meffie <mmeffie@sinenomine.net>
Reviewed-by: D Brashear <shadow@your-file-system.com>
(cherry picked from commit da549eea21941681c075796512a27a830259c835)
Change-Id: Iea8f252829ba6192176da0ceba464cbc41aad53c
Reviewed-on: http://gerrit.openafs.org/10955
Reviewed-by: Andrew Deason <adeason@sinenomine.net>
Tested-by: Stephan Wiesand <stephan.wiesand@desy.de>
Reviewed-by: Stephan Wiesand <stephan.wiesand@desy.de>
Mention the restrictmode entry and the commands for setting and
querying it in the BosConfig man page, and add/fix cross references
between the BosConfig, bos, bos_getrestricted and bos_setrestricted
ones.
Reviewed-on: http://gerrit.openafs.org/10874
Reviewed-by: Ken Dreyer <ktdreyer@ktdreyer.com>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Tested-by: Jeffrey Altman <jaltman@your-file-system.com>
(cherry picked from commit eee0bf5871944d919951cc8b7b4908ee909c3b62)
Change-Id: I25d2f23d75a9074ae478f86296bb13c1b2dda95b
Reviewed-on: http://gerrit.openafs.org/10883
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Michael Meffie <mmeffie@sinenomine.net>
Reviewed-by: Andrew Deason <adeason@sinenomine.net>
Reviewed-by: Stephan Wiesand <stephan.wiesand@desy.de>
The default will likely change in 1.6.8, not 1.6.7.
Change-Id: I5f5d62979fabd22ed79ccac6c584921acf571108
Reviewed-on: http://gerrit.openafs.org/10897
Reviewed-by: D Brashear <shadow@your-file-system.com>
Reviewed-by: Michael Meffie <mmeffie@sinenomine.net>
Tested-by: Stephan Wiesand <stephan.wiesand@desy.de>
Add the -offline-timeout and -offline-shutdown-timeout options to the
fileserver, to implement interrupting clients accessing volumes we are
trying to take the volume offline. Document the new options.
Currently this is only implemented for read operations. Implementing
this for write operations and callback breaks will require more work.
This also removes the VGetVolumeTimed interface from the volume
package, since the fileserver was the only user and with this change
the fileserver now uses the VGetVolumeWithCall interface.
Reviewed-on: http://gerrit.openafs.org/2984
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
(cherry picked from commit 4f7a51aa5115a9073771bc396e25d510aeae71e8)
Change-Id: I34967bb03a09e5655b02c9b7b39272cfe8f71d7b
Reviewed-on: http://gerrit.openafs.org/10799
Reviewed-by: D Brashear <shadow@your-file-system.com>
Reviewed-by: Andrew Deason <adeason@sinenomine.net>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Stephan Wiesand <stephan.wiesand@desy.de>
The _DELAYED behavior has had serious problems in the past, so change
the default to be _ONCLOSE instead.
This is a 1.6-only change. On master, the _DELAYED option does not
exist at all, and the _ONCLOSE behavior was made the default when this
option was introduced in master, in commit
eb5190eb4a7cd95166866a89e0a8f3a69bbc6e8f.
Change-Id: I01a50e1d829c141c38fbbbaba2c6d2d5a371b130
Reviewed-on: http://gerrit.openafs.org/10809
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Perry Ruiter <pruiter@sinenomine.net>
Reviewed-by: Andrew Deason <adeason@sinenomine.net>
Reviewed-by: D Brashear <shadow@your-file-system.com>
Reviewed-by: Stephan Wiesand <stephan.wiesand@desy.de>
Fix typo in the dropbox section where 'l' was referred
to as 'read', not 'lookup'.
Reviewed-on: http://gerrit.openafs.org/10750
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Ken Dreyer <ktdreyer@ktdreyer.com>
(cherry picked from commit eb3f8c99edcf005dfba836ae9ab1d3102f162c2a)
Change-Id: I177e6975c19d176e5a7277d0b458e36b4e5f99f9
Reviewed-on: http://gerrit.openafs.org/10751
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Ken Dreyer <ktdreyer@ktdreyer.com>
Reviewed-by: Stephan Wiesand <stephan.wiesand@desy.de>
Add an option to afsd to limit the number of fragments Rx will
send/receive, called -rxmaxfrags.
Reviewed-on: http://gerrit.openafs.org/4899
Tested-by: Derrick Brashear <shadow@dementia.org>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
(cherry picked from commit ba546ecf0c6a404f2efced2e600826621876ffcf)
Change-Id: Idb93fc60b3056604c1d415ac7fc134ee672ceefe
Reviewed-on: http://gerrit.openafs.org/9430
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Mark Vitale <mvitale@sinenomine.net>
Reviewed-by: Andrew Deason <adeason@sinenomine.net>
Reviewed-by: Stephan Wiesand <stephan.wiesand@desy.de>
Implement the fs flushall command on the unix cache manager to flush
all volume data. Uses a new common pioctl code point VIOC_FLUSHALL (14),
registered with the grand.central.org assigned numbers.
Reviewed-on: http://gerrit.openafs.org/7540
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
(cherry picked from commit 4197bbecd9d0b2ff0b8eaec75a0df9a64f713cf0)
Change-Id: Ia4e9eb070d279bf05dbe38ea9b99f1f2f6b9c6f0
Reviewed-on: http://gerrit.openafs.org/9390
Reviewed-by: Andrew Deason <adeason@sinenomine.net>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Reviewed-by: Stephan Wiesand <stephan.wiesand@desy.de>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Recent versions of Pod::Simple complain if we use integers or other
special characters in an =item list. We have a couple bulleted lists
that happen to have integers or other special characters as the list
values. Quote the items with C<> so that Pod::Simple can correctly parse
them again.
Reviewed-on: http://gerrit.openafs.org/9838
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Tested-by: Jeffrey Altman <jaltman@your-file-system.com>
(cherry picked from commit 32d823c52f212fb79816708418ad7d958eb32a01)
Change-Id: Ie3e5c792d64f1d2e973e3a5f68b8466986cde0d7
Reviewed-on: http://gerrit.openafs.org/9842
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jason Edgecombe <jason@rampaginggeek.com>
Tested-by: Jason Edgecombe <jason@rampaginggeek.com>
Reviewed-by: Stephan Wiesand <stephan.wiesand@desy.de>
Tested-by: Stephan Wiesand <stephan.wiesand@desy.de>
The actual behavior of FDH_SYNC has changed a bit over the years, and
some people want one behavior, and some want another. Make it possible
to make this choice at runtime with the new -sync option, instead of
making this decision by running with different patches.
Note that FDH_SYNC is not a macro anymore, nor is it an inline
function. While it could be a macro, it would look a bit complex, and
there are some oddities with trying to use vol_io_params inside the
FDH_SYNC expansion (vol_io_params is not declared for LWP, for
example). And having it be an inline function causes problems with
some odd linking dependencies. For example, vlib.a contains volume.o,
but does not contain a definition for DFlushVolume (dir/buffer.c),
which is referenced in volume.o. 'vos' uses vlib.a, but does not
bring in anything that defines DFlushVolume. Currently this appears to
not cause a problem because 'vos' uses nothing from volume.o, so the
dependencies of volume.o don't matter. Adding an inline FDH_SYNC for
platforms that don't support 'static inline' would add a dependency to
volume.o (via vol_io_params), which causes an error for the lack of a
DFlushVolume.
Those are possibly just some problems, and may not be all. So instead,
make it so we don't have to deal with that and just have a normal
function. While FDH_SYNC may be called in a performance-critical
section, the overhead of a real function call is nowhere near the
delay of an actual fsync(), so presumably any overhead doesn't matter.
Reviewed-on: http://gerrit.openafs.org/9694
Reviewed-by: Andrew Deason <adeason@sinenomine.net>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
(cherry picked from commit eb5190eb4a7cd95166866a89e0a8f3a69bbc6e8f)
Change-Id: I7a6c99d00eff3400423440db91a350053ed099ea
Reviewed-on: http://gerrit.openafs.org/9695
Reviewed-by: Andrew Deason <adeason@sinenomine.net>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Reviewed-by: Stephan Wiesand <stephan.wiesand@desy.de>
For Solaris 11, the module goes in drv, not fs.
Reviewed-on: http://gerrit.openafs.org/8152
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Ken Dreyer <ktdreyer@ktdreyer.com>
(cherry picked from commit a7278eb5620507cd70086582cf539b4024b46194)
Change-Id: Idb5f864132f436f9a6cc619d1c672c9ceec3ff67
Reviewed-on: http://gerrit.openafs.org/9566
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Andrew Deason <adeason@sinenomine.net>
Reviewed-by: Stephan Wiesand <stephan.wiesand@desy.de>
Add the dest path component in the quick start guide instructions for
copying files from a binary OpenAFS distribution file.
Reviewed-on: http://gerrit.openafs.org/7187
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@dementix.org>
(cherry picked from commit bc770a5007ae16aa5477bf1748f3e0666f665781)
Change-Id: I54c96f35ce4f9c60a25fee012306ecb210972287
Reviewed-on: http://gerrit.openafs.org/9564
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Andrew Deason <adeason@sinenomine.net>
Reviewed-by: Stephan Wiesand <stephan.wiesand@desy.de>
