Update the INSTALL file to reflect the current rs_aix platforms
that we can build for.
Reviewed-on: https://gerrit.openafs.org/15142
Reviewed-by: Cheyenne Wills <cwills@sinenomine.net>
Reviewed-by: Michael Meffie <mmeffie@sinenomine.net>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
(cherry picked from commit 4580f213b3a25dd57e6fd721f7ecc0ecad84fb07)
Change-Id: I3e0d62258e57ff6a54fae2e49a427c764e03a9ae
Reviewed-on: https://gerrit.openafs.org/15383
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Ben Huntsman <ben@huntsmans.net>
Reviewed-by: Michael Meffie <mmeffie@sinenomine.net>
Reviewed-by: Cheyenne Wills <cwills@sinenomine.net>
Reviewed-by: Stephan Wiesand <stephan.wiesand@desy.de>
Several files were still referencing the alpha_dux* and alpha_osf*
sysnames. The code for these platforms has been removed, so get rid of
this cruft.
Reviewed-on: https://gerrit.openafs.org/13339
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Michael Meffie <mmeffie@sinenomine.net>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
(cherry picked from commit 809ee49b80d7bc0e720aaebe78fb9ecfd453065d)
Change-Id: Iae1f642df6cfb4c2e757f0fc381cb98eb5bf448e
Reviewed-on: https://gerrit.openafs.org/15252
Reviewed-by: Andrew Deason <adeason@sinenomine.net>
Reviewed-by: Michael Meffie <mmeffie@sinenomine.net>
Reviewed-by: Harish Sharma <Harish.Sharma1@ibm.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Stephan Wiesand <stephan.wiesand@desy.de>
The 1.8.x specific commit in gerrit 12681, "Remove src/rxgk" (7c2ce4040)
removed rxgk from the build, however the probe for GSSAPI is still
place.
If there is no gssapi library available, configure fails:
checking for gss_import_name in -lgssapi_krb5... no
checking for gss_import_name in -lgss... no
configure: error: cannot find usable GSS-API library
There are no references to gssapi other than the probe in autoconf and
2 defines in src/config/Makefile.config.in
Remove the autoconf check for GSSAPI via the RAA_LIB_GSSAPI call.
Remove the 2 GSSAPI related defines from Makefile.config.in
Update the INSTALL document to remove references to gssapi.
Change-Id: I873e46bfccfbf538740e8bf5e28a3ca8c3cd3744
Reviewed-on: https://gerrit.openafs.org/15137
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Andrew Deason <adeason@sinenomine.net>
Reviewed-by: Michael Meffie <mmeffie@sinenomine.net>
Reviewed-by: Cheyenne Wills <cwills@sinenomine.net>
Reviewed-by: Mark Vitale <mvitale@sinenomine.net>
Reviewed-by: Stephan Wiesand <stephan.wiesand@desy.de>
According to <https://www.freebsd.org/security/unsupported.html>,
FreeBSD 8.x EoL was on August 1, 2015, and FreeBSD 9.x EoL was on
December 31, 2016. Remove our support for these versions, since they
haven't been supported by FreeBSD itself for a while.
FreeBSD 10.x EoL was on October 31, 2018, which has passed, but was
less than a year ago. So keep 10.x in for now.
Adjust our preprocessor checks accordingly:
- In FBSD-specific dirs, assume AFS_FBSD100_ENV and lower is always
true. Assume __FreeBSD_version is always at least 1000000.
- In non-FBSD dirs, convert AFS_FBSD100_ENV and lower to AFS_FBSD_ENV.
Reviewed-on: https://gerrit.openafs.org/13842
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
(cherry picked from commit a4e9365fff2b0e3daf7e9cf2b40e6027b7dd3a15)
Change-Id: If92991dead88bf8d18b837ef4661731c7fc2edbb
Reviewed-on: https://gerrit.openafs.org/14782
Reviewed-by: Andrew Deason <adeason@sinenomine.net>
Reviewed-by: Tim Creech <tcreech@tcreech.com>
Reviewed-by: Cheyenne Wills <cwills@sinenomine.net>
Reviewed-by: Stephan Wiesand <stephan.wiesand@desy.de>
Tested-by: Stephan Wiesand <stephan.wiesand@desy.de>
The change associated with gerrit #14300 removed support for older
Linux kernels (2.6.10 and earlier).
The commit 'Import of code from autoconf-archive' (d8205bbb4) introduced
a check for Autoconf 2.64. Autoconf 2.64 was released in 2009.
The commit 'regen.sh: Use libtoolize -i, and .gitignore generated
build-tools' (a7cc505d3) introduced a dependency on libtool's '-i'
option. Libtool supported the '-i' option with libtool 1.9b in 2004.
Update the INSTALL instructions to document a minimum Linux kernel
level and the minimum levels for autoconf and libtool.
Notes: RHEL4 (EOL in 2017) had a 2.6.9 kernel and RHEL5 has a 2.6.18
kernel. RHEL5 has libtool 1.5.22 and autoconf 2.59, RHEL6 has libtool
2.2.6 and autoconf 2.63, and RHEL7 has libtool 2.4.2 and autoconf 2.69.
Reviewed-on: https://gerrit.openafs.org/14305
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
(cherry picked from commit 16bae98ec525fa013514fb46398df682d7637ae0)
Change-Id: I7aaf434928204df77851dd2d651d43b86f5b53d2
Reviewed-on: https://gerrit.openafs.org/14331
Reviewed-by: Michael Meffie <mmeffie@sinenomine.net>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Stephan Wiesand <stephan.wiesand@desy.de>
Add support for the arm64/aarch64 architecture on Linux 2.6+. The
param header file is mostly combined from arm and amd64.
Note that the code for syscall interception has not been updated for
arm64, so this will not build on arm64 without support for kernel
keyrings. This also does not define any AFS syscall number, since no
number in the Linux arm64 syscall table is "free" for us to use, as
far as I am aware.
Adapted from initial patches from Micheal Waltz <mwaltz@qualcomm.com>.
Reviewed-on: https://gerrit.openafs.org/11940
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
(cherry picked from commit 4f7550dcaf9375046514cdd97cea0f667e955e9f)
Change-Id: I12988da1fbbc7e3733fddf4ca11ad65b96a9c02f
Reviewed-on: https://gerrit.openafs.org/13095
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Andrew Deason <adeason@sinenomine.net>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
CTF is a reduced form of debug information similar to DWARF and stab. It
describes types and function prototypes. The principal objective of the
format is to shrink the data size as much as possible so that it could
be included in a production environment. MDB, DTrace, and other tools
use CTF debug information to read and display structures correctly.
This commit introduces a new configure option called --with-ctf-tools.
This option can be used to specify an alternative path where the tools
can be found. If the path is not provided, the tools will be searched
in a set of default directories (including $PATH). The CTF debugging
information will only be included if the corresponding --enable-debug /
--enable-debug-kernel is specified.
Note: at the moment, the Solaris kernel module is the only module
benefited by this commit.
Reviewed-on: https://gerrit.openafs.org/12680
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
(cherry picked from commit 88cb536f99dc58fdbeb9fa6c47c26774241a0cb6)
Change-Id: I174347370a83b31f68d2631c965e17d72b438cd1
Reviewed-on: https://gerrit.openafs.org/12902
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Pick some fairly old versions of clang and gcc and document them
as the minimum supported version. This will let us make assumptions
about compiler features that are available when using those compilers.
Change-Id: Ibb8df72c9b12cc7adff39ece9708a428975ba703
Reviewed-on: https://gerrit.openafs.org/12331
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Mark Vitale <mvitale@sinenomine.net>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
We enabled pthreaded ubik by default in commit 27cb0d38885428474b0d4287,
and it is no longer considered beta or experimental. There is no longer
a need for separate documentation of it, and adjust the options
listing in INSTALL accordingly.
[kaduk@mit.edu: adjust for the changed default behavior.]
Change-Id: Ib1315e55c1e00bdae0f55f0f8446f5a2c3d9671f
Reviewed-on: http://gerrit.openafs.org/10978
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Create a new top level README to introduce OpenAFS.
Move the old README to a file called INSTALL for information about
building and installing OpenAFS on various platforms.
Change-Id: Id8853de73f669a6d5497cafd65a1e98b309c6efc
Reviewed-on: http://gerrit.openafs.org/10976
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Remove obsolete configure options and document all remaining options
other than some provided by Autoconf and some that are currently not
very interesting.
Document that, on modern Linux systems, configure can find the kernel
build system and headers by itself and doesn't need the flag.
Include some more information in README about changing the default
installation paths, and mention that the da* versions of the file server
and volserver also aren't stripped.
Remove the generic GNU installation instructions, which aren't useful
for OpenAFS.
Change-Id: I56d0003ff0173749e9a5e04f1d0ed4d004787dfd
Reviewed-on: http://gerrit.openafs.org/2438
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
