This reverts commit 94bf003a72.
The fuse tests are fundamentally broken as they stand:
*) They rely on files that have not been committed to the tree. To
function correctly the file fuse/conf/CellServDB must be present
*) They always run, regardless of whether the fuse helper binaries are
installed on the developers system, or even on whether the tree was
built with fuse support enabled.
*) They pass, even if fuse fails to start up
*) The file fuse.sh is committed, despite being unused. This is
particularly confusing, as it looks like this is where the tests
are performed from (its not, testing is done in dynroot-t)
*) fuse-log should be either cleaned up, or flagged as ignored in
.gitignore
Revert the commit until such time as all these issues can be fixed
Change-Id: I5ff9a95f33c0a5d0614bb47c521a8770d92fe2eb
Reviewed-on: http://gerrit.openafs.org/8230
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Update makefiles to have 'make test' and 'make check' use the
_nolibafs build version, since there are no tests that (currently)
require the AFS kernel module to be built.
Clean up fuse test copyright notice, Alphabetize configure.ac
Change-Id: Icc95dd3393cd66f0d04fa5f6e8f806db60ca031e
Reviewed-on: http://gerrit.openafs.org/8135
Reviewed-by: Troy Benjegerdes <hozer-gerrit@hozed.org>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
all of our helper tools should be configured in one place,
so a cross compile can override them
Change-Id: I35044832257fa3389504f79207aa423e39d1ad4a
Reviewed-on: http://gerrit.openafs.org/8198
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Currently, the type of library you build is determined by whether
the library is build in a pthread, or an lwp build directory. However,
this prevents building an LWP library in a directory that builds
pthreaded clients and servers.
As we want to continue to provide LWP libraries for backwards
compatibility, but move over to pthreaded binaries, this causes
some issues.
So, split up the libtool logic, so we have Makefile.libtool, which
you include if you want to build a pthreaded libtool library, and
Makefile.lwptool, for building a library which supports LWP and
pthreaded use. These only affect how .lo files are built - so the
.o files used for non-library objects are managed with the
Makefile.pthread and Makefile.lwp includes as before.
Change-Id: Ib1af48342253230abab9056eb15a3f79bd77a6de
Reviewed-on: http://gerrit.openafs.org/8126
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Construct the libafsauthent library with libtool. All libraries
contributing to libafsauthent provide a libauthent_<library>.la
convenience library, which we use libtool to combine into shared
and static versions of libafsauthent.
Change-Id: I76fa61eb027862eab730c4c86ab74a7b7e03c13b
Reviewed-on: http://gerrit.openafs.org/8097
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: Derrick Brashear <shadow@your-file-system.com>
Use libtool to assemble the libafsrpc shared and static libraries
from objects built with libtool in each of the directories that
contribute to the library (fsint, rx, rxkad, comerr, util, rxstat,
sys and lwp).
Each source directory controls which objects are built into the shared
library by making a libafsrpc_<dir> libtool convenience directory. These
convenience directories are then merged together to produce the
libafsrpc library.
Change-Id: I330aeb8df4c237b408a298826363eea7357339ce
Reviewed-on: http://gerrit.openafs.org/8072
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Create a pthreaded version of libafsutil, named liboafs_util.la,
and use this library in all of the pthreaded binaries that we build,
replacing both inclusion of libafsutil.a, and direct compliation of
pthreaded versions of the util source files.
libafsutil.a is provided for legacy LWP applications, and the
convenience library libafsutil_pic.a remains until we address the way
in which the user space cache manager is built and linked.
Change-Id: Ibdc3d6e2fe56ca6f5b882cf03991d1a2e32c62b2
Reviewed-on: http://gerrit.openafs.org/8056
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Some of the tests code (specifically, that in tests/volser) depends on
objects in src/viced being build (specifically, vldbint stuff). So,
make 'tests' depend on 'viced', so they are built before we get there.
Change-Id: I572c490cf7bd6c84beb8966783c38869b371a85e
Reviewed-on: http://gerrit.openafs.org/7367
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Add support for using libtool to the Unix build system to build
both pthreaded and lwp libraries. For purely pthread libraries,
this just provides convenience macros to invoke the standard GNU
libtool from the OpenAFS build system. For libraries that have
lwp variants, we provide an initial wrapper script - lwptool,
which handles building a non-PIC LWP object before asking libtool
to build the pthread variants.
For a given source example.c, example.o is the non-PIC pthread
object, .libs/example.o is the PIC pthread object, and
.lwp/example.o is the LWP object.
To use libtool for a particular library directory, add the line
include @TOP_OBJDIR@/src/config/Makefile.libtool
to the file's preamble. Makefile.pthread, or Makefile.lwp should be
included as normal to indicate whether the libraries in this Makefile
are pthread only, or should be built for both pthread and LWP objects.
The variables LT_current, LT_revision and LT_age may be used to control
the version of the shared objects produced. They have the same meaning
as that documented in the Versioning section of the libtool manual.
The LT_objs variable should be set to a space separated list of the .lo
objects included in the library. Note that there should _never_ be a
dependency on the .o form of these objects in the Makefile, as this
breaks parallel builds.
LT_deps is a list of the libtool dependencies of the library, and
LT_libs is a list of the external (non-OpenAFS) library dependencies.
A file called <libraryname>.sym should be created which contains a
newline seperated list of all of the symbols exported from this
library.
LWP library names remain the same as always. To distinguish the
pthreaded static and shared libraries these
LWP libraries should be linked using
libexample.a: $(LT_objs)
$(LTLWP_LDLIB) $(LT_objs)
Shared libraries should be linked using
libexample.la: $(LT_objs) $(LT_deps)
(note that the pattern rules in the included Makefile take care of the
build rule here)
If necessary, static convenience libraries can be produced using:
libconvenience.a: $(LT_objs)
$(LTLWP_LDLIB_static) $(LT_objs)
PIC convenience libaries can be linked using:
libconvenience_pic.a: $(LT_objs)
$(LTLWP_LDLIB_pic) $(LT_objs)
Libtool libraries should be installed using the $(LT_INSTALL_DATA) macro
Binaries linking agains libtool libraries should be linked using the
$(LT_LDRULE) or $(LT_LRDULE_static) options, with library paths in the
built locations relative to the top of the tree. For example
example_test: example_test.o $(top_builddir)/src/example/libexample.la
$(LT_LDRULE) example_test.o \
$(top_builddir)/src/example/libexample.la
Change-Id: I32b162e8443119e8115febc532c5b5a0ec8fed32
Reviewed-on: http://gerrit.openafs.org/8033
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@dementix.org>
With the rise of roken, the fasttime file no longer depends on util
Change-Id: I2a1391d13bb39321666889dcfc2fbf43b181c749
Reviewed-on: http://gerrit.openafs.org/8030
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Reviewed-by: Derrick Brashear <shadow@dementix.org>
Add a set of functions to the opr library to handle creating and
manipulating UUIDs.
The opr_uuid_t type is held as a 16 octet character string, which
comprises the UUID encoded into network byte order. This is the
primary form for manipulating UUIDs with this library, as it avoids
any nbo/hbo problems.
For applications which require raw access to the UUID components,
the opr_uuid_unpacked structure is provided, and
opr_uuid_pack/opr_uuid_unpack can be used to convert to and from
this format.
Finally, functions to print the UUID as a string, and parse a UUID
from a string, are provided. When printing, we use the standard UUID
format of 000000-0000-0000-0000-00000000. However, the afsUUID library
used to print UUIDs as 000000-0000-0000-00-00-00000000, so we also
accept this format.
Change-Id: I78ef79b7ab8ae15fb955c6495118722875c94f8d
Reviewed-on: http://gerrit.openafs.org/7977
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@dementix.org>
Add ability to do 'make cscope' at the top of
the distribution tree and get 'cscope.out' built
in ./src. Index file is removed in 'make clean'.
cscope.out is now ignored in src/.gitignore
Change-Id: I2ae4eea0fce46a87a6b9d5a992fcb7288f6b5655
Reviewed-on: http://gerrit.openafs.org/7594
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Tested-by: Jeffrey Altman <jaltman@your-file-system.com>
provide an option to disable building uss. current heimdal
when built static can leak symbol names for its flex/bison parser
causing symbol conflicts. this is but a workaround, but
sites not needing uss can at least use it.
Change-Id: Ibab1dd189e7fbc41ca01e7ef7479421c056999f5
Reviewed-on: http://gerrit.openafs.org/7553
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@dementix.org>
Move the 'rxperf' RX performance testing utility out of the
src/rx/test directory, and into the slightly more visible top level
src/tools/ directory
As this is the first time that rxperf has been built as part of the
default build, make a number of changes so that it will build on all
of our supported platforms.
Change-Id: Ice37e7db694dbfed34009bf76d24f1e0bf272e47
Reviewed-on: http://gerrit.openafs.org/7240
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@dementix.org>
Move dumpscan into its own directory, so that it's Makefile rules can
be better contained, and not pollute the whole 'tools/' namespace
Change-Id: Ic58d007824ab802eae469dd2996300f80671a3b8
Reviewed-on: http://gerrit.openafs.org/7239
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@dementix.org>
The perl-AFS module needs to link against a pthreaded, PIC, library
that contains all of the routines that it provides perl shims for.
At the moment, libafsrpc_pic and libafsauthent_pic are the only such
libraries that OpenAFS provides.
Add all of the necessary objects to libafsauthent_pic such that the
2.6.2 version of perl-AFS can build with a minimal set of patches.
Minimise the damage by only making these available through the static
version of the libafsauthent_pic library.
Change-Id: I5a2aa5f5fbcfbe15aa7a23c3ab57b34b979ab2f3
Reviewed-on: http://gerrit.openafs.org/7070
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@secure-endpoints.com>
even if we get more than one match, and even if there's a space,
work anyway
Change-Id: I8e71af0cb02fda7ea0fcf1c2f7a0404eca4bc073
Reviewed-on: http://gerrit.openafs.org/6971
Reviewed-by: Derrick Brashear <shadow@dementix.org>
Tested-by: Derrick Brashear <shadow@dementix.org>
Also, fix afsxbsa.h to always include <time.h> since this should get
struct tm on any fairly modern operating system.
Change-Id: Idfb39f12d28a2a0aa470c8549e4149d0b2ccde9e
Change-Id: Ia1c563e5954c533f18bd56155f2ae1825813efe3
Reviewed-on: http://gerrit.openafs.org/6923
Reviewed-by: Derrick Brashear <shadow@dementix.org>
Reviewed-by: Andrew Deason <adeason@sinenomine.net>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
*) Remove all LWP specific code from the fileserver, and make pthread
the default
*) Build the pthreaded fileserver in the 'viced' directory, rather than
in tviced
*) Move the DAFS specific files from tviced to viced (arguably, these
should move into dviced, but there are currently no source files in
that directory)
*) Remove tviced from the build
Change-Id: I6e186c9fad6d9dccd04cf1317a80c087587ef25f
Reviewed-on: http://gerrit.openafs.org/5816
Reviewed-by: Derrick Brashear <shadow@dementix.org>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Assorted fixes for issues seen with parallel builds:
- bucoord must depend on butm, since it uses libbutm
- for most object files in roken and hcrypto, headers must be installed
before building
- remove rules with 2 targets in rxkad and ubik
- budb: add dependencies for db_dump.o
Change-Id: Ide05f223c2f1fe53bff33cb03011ca47bf741c80
Reviewed-on: http://gerrit.openafs.org/6568
Reviewed-by: Derrick Brashear <shadow@dementix.org>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
we need opr for comerr, but we don't want it after. build,
then clean up.
Change-Id: I621f36bc5f6db85720b73b33578975d0dd126a18
Reviewed-on: http://gerrit.openafs.org/6525
Reviewed-by: Derrick Brashear <shadow@dementix.org>
Tested-by: Derrick Brashear <shadow@dementix.org>
Instead of the current event stack, which uses a sorted linked
list, use a red/black tree to maintain the timer stack. This
dramatically improves event insertion times, at the expense of
some additional implementation complexity.
This change also adds reference counting to the rxevent
structure. We've always had a race between an event being
fired, and that event being simultaneously cancelled by
the user thread. Reference counting avoids that race resulting
in the structure appearing twice in the free list.
Change-Id: Icbef6e04e01f3eef5b888bc3cb77b7a3d1be26ae
Reviewed-on: http://gerrit.openafs.org/5841
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Tested-by: Jeffrey Altman <jaltman@secure-endpoints.com>
Reviewed-by: Jeffrey Altman <jaltman@secure-endpoints.com>
Move the header which is installed as opr/queues.h out of util/ and
into the new, top level, opr/ directory. Similarly move the tests out
of the util/ test suite, and into the opr/ tests
Change-Id: I81af487f09e1f0f4b25654a1f64c5ac75fd5a95b
Reviewed-on: http://gerrit.openafs.org/5656
Reviewed-by: Derrick Brashear <shadow@dementix.org>
Tested-by: Simon Wilkinson <sxw@inf.ed.ac.uk>
At some point, the build lines for tbutc and tvlserver ended up
omitting Darwin platforms. This is incorrect, so re-add Darwin to the
platform list.
Change-Id: I7704eb19a457620b37cbe3d9cbd33d6c9bd3ae5e
Reviewed-on: http://gerrit.openafs.org/5401
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@dementix.org>
Some functions in libafsutil depend upon the RX libraries, which means
that pulling in other functions in this library can create a dependency
upon RX. This is less than ideal for low-level libraries such as cmd and
comerr.
So, create a new low-level library (currently named 'opr') which can
contain low-level functions from util, and elsewhere. This library
should have no dependencies other than on system libraries and libroken.
Change-Id: I703db3da4d8faf79ee82bf572af09d07152d9b25
Reviewed-on: http://gerrit.openafs.org/5363
Reviewed-by: Derrick Brashear <shadow@dementix.org>
Tested-by: Derrick Brashear <shadow@dementix.org>
Add an explicit dependency on libafsauthent for src/venus, since it
is needed to build afsio. This can cause parallel builds to fail.
Change-Id: Ifda59983cda0711e9e1568d5a6be25e6ea934eee
Reviewed-on: http://gerrit.openafs.org/5171
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Add the volser and vldb families of functions to libafsauthent. This
allows applications such as per-AFS which are building pthreaded clients
to use a single library, rather than trying to mix LWP and pthreaded
code within the same process.
Change-Id: I3682876e91ca03311a798ac71e3a7a28f3205d42
Reviewed-on: http://gerrit.openafs.org/5157
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Nothing within the volser/ directory depends on tviced, so remove the
unecessary dependency. Add an explicit dependency on vlserver, so that
libvldb is available to us.
This is required to get rid of some potential circular loops when we
start including volser objects in libafsauthent
Change-Id: Ibb6b8fb87dfe6e9eb4fa6d1dde195fd5261a8959
Reviewed-on: http://gerrit.openafs.org/5156
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
... so say so in the Makefile
Change-Id: I84f0ac3c06953eff98e0194ad375c32b3656af58
Reviewed-on: http://gerrit.openafs.org/5155
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
The configure help text for --enable-pthreded-ubik says
"enable installation of pthreaded ubik applications"
This patch set makes the behaviour in the code match that. Instead
of controlling whether the pthreaded ubik code is compiled at all,
the configure option now just controls whether it is installed. This
means that we'll always build the pthread code, and so should reduce
the number of times it is inadvertently broken.
Change-Id: I8b2ffb46e01157f2043cf7daf68e69580ea285c5
Reviewed-on: http://gerrit.openafs.org/5028
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
Add targets to generate distribution tarballs, and srpms, from a tree.
These will generate packages for whatever the current HEAD of the tree
is - if the HEAD is a release tag, then the packages will be named for
that release, if the HEAD is between releases, then git describe will
be used to create an appropriate version identifier.
The tarballs are generated from the current git repository contents,
anything not checked in will not be included.
Change-Id: Ic5cde2382f973a004406e0ef0f09708d0ba0ad5f
Reviewed-on: http://gerrit.openafs.org/4984
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
we need roken and hcrypto to build the bits we need to build the
compiler tools on master. do so.
Change-Id: I3e974a5d94bdfdf3e89f3d18aed55ed586b0034d
Reviewed-on: http://gerrit.openafs.org/4835
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
des is in the generated targets. kill it.
Change-Id: Ifb4ad48b0f57e95842411046cb79b589669265b7
Reviewed-on: http://gerrit.openafs.org/4833
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Move code for faking up an OpenAFS configuration directory into its
own "common" directory, as it's going to be of use to more tests than
just those in auth.
Change-Id: I9c80dd66763e222deca98bc7744ff317111c6ed8
Reviewed-on: http://gerrit.openafs.org/4806
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Move the definitions of the INSTALL_* variables out to
Makefile.config rather than replicating them in each file.
Change-Id: I5f74dcbf544a93716994418bee3be2c51a2a82d0
Reviewed-on: http://gerrit.openafs.org/4781
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Currently, venus fails to build without kerberos, since the
dependencies for afsio always include afscp.h, which does not exist
when we do not build libafscp. To fix this the easy way, and since
libafscp is still very useful without kerberos, allow libafscp to
build without kerberos support (which limits it to anonymous
connections only).
Change-Id: Ief620ca99223f195795dcbe746b47fcbfa2e7450
Reviewed-on: http://gerrit.openafs.org/4577
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Add some tests for the command library to the integrated test
suite in tests. These are far from complete, and are mainly there
to ensure that we don't break any of this functionality when modifying
the library.
Change-Id: Ib6fbdca114c005c32c5ba8c41f9e350ca67e1fb8
Reviewed-on: http://gerrit.openafs.org/4538
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
and probably more than just these but let's start here.
Change-Id: Id0f174a84ecb8ffd1fbdcade6f139fc78c4b99e2
Reviewed-on: http://gerrit.openafs.org/4492
Reviewed-by: Simon Wilkinson <sxw@inf.ed.ac.uk>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
afsio is a utility for file transfer to and from AFS file space
without the help of the AFS client/cache manager. Using libafscp,
this (partially rewritten) version of afsio is able to accomplish
(1) authenticated access to an AFS path or FID (an existing
KerberosV ticket is required), (2) fall back on unauthenticated
("anonymous") access if authentication (token acquisition) fails,
and (3) work independtly of the AFS cache manager (afsd need not
be running, though CellServDB and ThisCell are currently required).
issues:
1) libvldbint and libafsint are not compiled pthreaded. we link in
what we need. this should be changed when we are all-pthreaded.
2) venus is not a pthreaded-directory otherwise. same deal:
in an all-pthreaded universe, undo the bodge that we do here.
3) venus is not an all-krb5 directory either. slight ick.
Change-Id: I946e6eef58ac77c6fb97be256c4c564188201262
Reviewed-on: http://gerrit.openafs.org/4381
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
This patch is intended to bring libafscp into accordance with the
current OpenAFS coding standards while also fixing a few small
issues. Apologies in advance for the numerous whitespace changes.
Change-Id: I606ed5024395319e12e8759f31494ebd27ff6112
Reviewed-on: http://gerrit.openafs.org/4380
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
Improve assorted clean targets so that they properly clean up all of
the default build products.
Add rxosd to the list of directories to clean
Change-Id: Id4987ec00654d7b3bd3b42eddefbcc50b5bdb03e
Reviewed-on: http://gerrit.openafs.org/4114
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
don't leave build results which will interfere with the next phase around
Change-Id: If7e5f4773b7c79f7deceb88d7393cbb65a220bd5
Reviewed-on: http://gerrit.openafs.org/4074
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
