Currently, we inhibit various -Wdeprecated-declarations warnings via
"#pragma GCC diagnostic warning". Some older compilers (like gcc 4.1 on
RHEL5) don't understand the pragma, but still need the warning inhibited
in order to build with --enable-checking. So just inhibit this warning
via command-line CFLAGS instead of using #pragma directives.
One source file, tests/auth/superuser-t.c, was inhibiting the
-Wdeprecated-declaractions warning unnecessarily (it has not been needed
since commit 5815a04cf1 (tests: Move token faking code to its own
file)). Just remove the warning inhibition there, instead.
Change-Id: I52b1aeeac8699f9a4820626e9f1349f8cd380585
Reviewed-on: https://gerrit.openafs.org/15777
Reviewed-by: Michael Meffie <mmeffie@sinenomine.net>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Currently, afstest_StartVLServer waits for a fixed amount of time (5
seconds) for the vlserver to startup. This means each test that runs a
vlserver takes at least 5 seconds, which adds up very quickly when new
tests are added for vlserver functionality.
Instead of waiting 5 seconds each time, change afstest_StartVLServer
to check if the vlserver has started up, and to wait a much shorter
time if it hasn't finished starting up yet. Specifically, wait until
the "Starting AFS vlserver" message appears in VLLog, and the
UBIK_RECHAVEDB recovery state bit is set. This allows vlserver-based
tests to run much more quickly.
Change-Id: I74015670a301980e6d89b3149ed9f2a6c1a40523
Reviewed-on: https://gerrit.openafs.org/14804
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Cheyenne Wills <cwills@sinenomine.net>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Since commit a62de618 (Build util tests properly with make check),
running 'make check' in tests/ also runs 'make check' in each of the
tests subdirectories, which builds the tests in that dir. (And the
same goes for 'make test' and 'make tests'.)
This does ensure that the tests are built before we run them, but it's
a bit strange to build the tests under 'make check', a target that
usually runs tests.
We do this in the top-level tests dir to make sure that the tests are
built, but this purpose is served by the existing 'make all' target.
So to reduce some duplication of logic, and reduce the number of
targets the subdirs need to implement, just have 'make check' depend
on 'make all', so we know the tests are built when we go to run them.
Change-Id: I2fcbe88daeeae94cd7ef7a4a8326c4b56fadee5a
Reviewed-on: https://gerrit.openafs.org/14636
Reviewed-by: Michael Meffie <mmeffie@sinenomine.net>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Add a new function (is_command), to help implementing tests that
involve running a command. This works like is_string(), except the
string value we compare against is the output of the provided command,
and we also check the exit code of the command.
Convert the existing execl() call in volser/vos-t to use this new
function.
Change-Id: I4a75b1a0333e608da6a6cd69838350116a2503a9
Reviewed-on: https://gerrit.openafs.org/14040
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Currently, several of our tests contain logic to locate files (via
srcdir or objdir), based on the C_TAP_SOURCE/BUILD environment
variables. This logic is duplicated in several places, so consolidate
the code into a couple of new functions: afstest_src_path and
afstest_obj_path. Update all callers to use these new functions.
Change-Id: I67a5e5d7f8fd7a1edb55a45e52d877ac41f9a2ea
Reviewed-on: https://gerrit.openafs.org/14319
Reviewed-by: Michael Meffie <mmeffie@sinenomine.net>
Reviewed-by: Cheyenne Wills <cwills@sinenomine.net>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Currently, a few tests use the code in tests/common/ by linking
individual object files in there in addition to the test code (e.g.
linking ../common/config.o along with superuser-t.o).
This convention makes it very obnoxious to move code around in
tests/common/, since any users need to update their link lines. It
also makes it difficult for code in tests/common/ to make use of
functions in other tests/common/ files.
To fix this, just build all of the objects in tests/common/ into a
convenience library, called libafstest_common, and link the relevant
tests against that. Link a few requisite libraries (roken, rfc3961) in
libafstest_common, so each individual test doesn't need to link
against them.
Also link the TAP library itself in libafstest_common, so tests don't
have to explicitly link against it separately. To do this, convert it
into a libtool library, libafstest_tap.la.
Change-Id: I9c031c164efee20201336edcbfaff429e1d231b7
Reviewed-on: https://gerrit.openafs.org/14318
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Fix a few miscellaneous issues with building and running our tests in
objdir builds:
- Our C tests use -I$(srcdir)/../.. in the CFLAGS, so we can #include
<tests/tap/basic.h>. However, basic.h actually gets copied from
src/external/c-tap-harness/tests/tap/ to tests/tap/ during the
build, and so basic.h is available in the objdir, not srcdir. For
objdir builds, this causes building the tests to fail with failing
to find basic.h. Fix this to use TOP_OBJDIR as the include path
instead.
- Our 'make check' in tests/ tries to run ./libwrap; but our cwd will
be in the objdir for objdir builds, and libwrap is a script in our
srcdir. Fix this to run libwrap from the srcdir path.
- In tests/opr/softsig-t, it tries to find the 'softsig-helper' binary
in the same dir as 'softsig-t'. However, softsig-t is just a script
in the srcdir, but softsig-helper is a binary built in the objdir.
Fix this to use the BUILD env var provided by the tests wrapper, by
default.
Change-Id: Iff642613bfc88d0d7e348660dc62f59e6fa8af75
Reviewed-on: https://gerrit.openafs.org/13939
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Remove the unused h_errno extern, which in turn removes the need
for disabling strict prototype warnings in the Makefile
Use roken.h, instead of hardcoding system libraries
Change-Id: Ie654c77ff60ed14fc3b659fa3eb527535be71164
Reviewed-on: http://gerrit.openafs.org/8228
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Move the token faking code out of superuser-t.c into its own file in
tests/common, so it can be used by other tests.
Change-Id: I7b420250ef974b4b80a8dde692d2666657bb82ca
Reviewed-on: http://gerrit.openafs.org/7259
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@dementix.org>
Abstract out the code which the volser test uses to produce a
ubik client so that it can be used to test other ubik services
Change-Id: I800fda9e53ad45c91f3de8eceea387cc011dda3c
Reviewed-on: http://gerrit.openafs.org/7257
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@dementix.org>
Move code for faking up an OpenAFS configuration directory into its
own "common" directory, as it's going to be of use to more tests than
just those in auth.
Change-Id: I9c80dd66763e222deca98bc7744ff317111c6ed8
Reviewed-on: http://gerrit.openafs.org/4806
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
