Don't assume that converting a UUID to a string will always succeed.
Instead, opr_uuid_toString should return a status result to indicate
whether the operation was successful or not.
Change-Id: I49e6bf53b2a878342d3137510d2eca522e58604d
Reviewed-on: http://gerrit.openafs.org/9990
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Make afstest_UnlinkTestConfig clean up and remove the specified
directory regardless of which files are present. This means
the function no longer has to track the current state of which
files may be present as tests are added and modified.
A sanity check is added to prevent damage in case the function is
called for an inappropriate directory.
As before, no cleaning is done if the test is run outside of a
"make check".
Change-Id: Idd092040496aaa2566c8693496fefd7d6f247565
Reviewed-on: http://gerrit.openafs.org/9703
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Split the man page check routine into two routines; one to get the list
of sub-commands for a command, and another to verify a man page exists
for each sub-command. Use the list of sub-commands to set up the
Test::More plan before running the tests.
Setting the plan before running the tests allows the the man page tests
to run on systems which ship older versions the Test::More module.
Change-Id: I1ed6fb87989e1deff4696562f3b917140592ed17
Reviewed-on: http://gerrit.openafs.org/9835
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Ken Dreyer <ktdreyer@ktdreyer.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Export the posix signal constants in the rx/perf perl test. Fixes a
perl syntax error on solaris.
Change-Id: Iaad361b8533787f9ad97fa00221e01e687f50723
Reviewed-on: http://gerrit.openafs.org/9836
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
In the case of a host where gethostbyname is unable to resolve
the hostname, afstest_BuildTestConfig() may return NULL which
can cause several tests to crash.
Add a common function to look out for this condition and use it where
appropriate. When it occurs, the current module is skipped and
the user gets an error message that indicates the configuration
problem.
Change-Id: I7216876eb2424368f415e5759e2b95009ad055b2
Reviewed-on: http://gerrit.openafs.org/9120
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Use liboafs_auth.la directly, rather than using libafsauthent, to
build the auth tests
Change-Id: Idf0e7a32626802b6113d21833ded09d9e20e3659
Reviewed-on: http://gerrit.openafs.org/9023
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Fix the trailing whitespace and leading spaces
before tabs in the readme files.
Change-Id: If20e528ddb28f82e4d3d1b1f03dec8670f914afc
Reviewed-on: http://gerrit.openafs.org/8877
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Michael Meffie <mmeffie@sinenomine.net>
Reviewed-by: Ken Dreyer <ktdreyer@ktdreyer.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Change rxevent_Put so that it takes a pointer to the event being
put, and NULLs that pointer. This removes a lot of duplicate code
in callers, as well as making it harder to reuse a discarded event.
Change-Id: Ib7a51f01687e08ea3dced5932ec9ec27797a784a
Reviewed-on: http://gerrit.openafs.org/8540
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Many different structures can be passed to the rxevent package as
data. Don't give calls special treatment by making rxevent aware of
how to release their reference counts when an event is cancelled.
Update all of the callers of rxevent_Cancel to use the new arguments,
and where they were cancelling functions with calls as parameters add
the appropriate CALL_RELE directives. In many cases, this has led to
new helper functions to cancel particular call-based events.
Change-Id: Ic02778e48fd950e8850b77bd3c076c235453274d
Reviewed-on: http://gerrit.openafs.org/8538
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
opr_queue_IsEnd's implementation was incorrect - it would return
true when the element was the last item in the list, not when it
was the end of the list (equal to the head record)
Correct the implementation of isEnd, and add an implementation for
isLast.
This fixes a bug in RX, wher we would never notice that the last
packet in the transmit queue was acknowledged, because the loop that
iterates over the queue uses isEnd to detect when its work is done.
Change-Id: I8966e05c479c18d025bb5cc4cf77514ce002be95
Reviewed-on: http://gerrit.openafs.org/8493
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Add a simple implementation of a dictionary/hash structure based around
opr queues and the jhash hashing function.
Change-Id: I4ae5cafcef377b05c8caa7c455737a992b1d36cd
Reviewed-on: http://gerrit.openafs.org/8355
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Add a function to jhash that can be used to hash a pair of unsigned
integers (or other stuff that can cast to them) without having to build
up an array.
Provide a couple of tests for the new function
Change-Id: I594848f64316fb459eff565933691f560512ca79
Reviewed-on: http://gerrit.openafs.org/8354
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
The change to cleanup temporary files after tests
(0c3670914a) broke all attempts
to run the tests using libwrap, as it would cause libwrap to run
the binary named "MAKECHECK=1"
Move the variable defintion before the libwrap invocation to fix this.
Change-Id: I330267c9b53483abccf43d60a7dc8f8d973c3959
Reviewed-on: http://gerrit.openafs.org/8356
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: Derrick Brashear <shadow@your-file-system.com>
Call the configuration directory cleanup function before exiting
so there are no files left behind, even in case of error.
Add KeyFileExt to the list of files that are removed.
Change-Id: Ie795bef0d44609b36950970244c02a6c6da1a843
Reviewed-on: http://gerrit.openafs.org/8142
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Simon Wilkinson <simonxwilkinson@gmail.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
This reverts commit 94bf003a72.
The fuse tests are fundamentally broken as they stand:
*) They rely on files that have not been committed to the tree. To
function correctly the file fuse/conf/CellServDB must be present
*) They always run, regardless of whether the fuse helper binaries are
installed on the developers system, or even on whether the tree was
built with fuse support enabled.
*) They pass, even if fuse fails to start up
*) The file fuse.sh is committed, despite being unused. This is
particularly confusing, as it looks like this is where the tests
are performed from (its not, testing is done in dynroot-t)
*) fuse-log should be either cleaned up, or flagged as ignored in
.gitignore
Revert the commit until such time as all these issues can be fixed
Change-Id: I5ff9a95f33c0a5d0614bb47c521a8770d92fe2eb
Reviewed-on: http://gerrit.openafs.org/8230
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Reformat the loopback tests to match our house style - 4 spaces for
first indent, a tab for the second, and so on, opening brace of a
function on a newline, spaces around assignments, and so on.
Change-Id: I54f168ca143e7ff46c9d82289331b8314849f848
Reviewed-on: http://gerrit.openafs.org/8229
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Remove the unused h_errno extern, which in turn removes the need
for disabling strict prototype warnings in the Makefile
Use roken.h, instead of hardcoding system libraries
Change-Id: Ie654c77ff60ed14fc3b659fa3eb527535be71164
Reviewed-on: http://gerrit.openafs.org/8228
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Update makefiles to have 'make test' and 'make check' use the
_nolibafs build version, since there are no tests that (currently)
require the AFS kernel module to be built.
Clean up fuse test copyright notice, Alphabetize configure.ac
Change-Id: Icc95dd3393cd66f0d04fa5f6e8f806db60ca031e
Reviewed-on: http://gerrit.openafs.org/8135
Reviewed-by: Troy Benjegerdes <hozer-gerrit@hozed.org>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Avoid the problems with libopr's dependencies by just converting
the tests to use the libtool version of the opr library. While we're
at it, make the tests pthreaded too.
Change-Id: I4e570b288ea57c758c848be1d545e5ee59771ab9
Reviewed-on: http://gerrit.openafs.org/8127
Reviewed-by: Jason Edgecombe <jason@rampaginggeek.com>
Tested-by: Jason Edgecombe <jason@rampaginggeek.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
The volser Makefile had a bad path for liboafs_util, and was still
directly pulling in some objects from the fileserver build. Fix it
so that it uses proper libraries.
Change-Id: Ic36c6a0f93c299bd04d48fa4238c4da5cbc571d4
Reviewed-on: http://gerrit.openafs.org/8125
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jason Edgecombe <jason@rampaginggeek.com>
Tested-by: Jason Edgecombe <jason@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Return of an exit status of zero when running commands with -help,
instead of returning an error. By general convention, and in
previous versions, tools do not not treat -help as an error.
The AFS::Command perl modules, use -help as an introspection
technique, and fail when commands run with the -help option returns
non-zero.
Change-Id: I6ecd95f6ccd07218a2657dbb4dbf1c13599159f4
Reviewed-on: http://gerrit.openafs.org/8087
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Reviewed-by: Simon Wilkinson <simonxwilkinson@gmail.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Build a pthreaded, libtool, version of librx.a called liboafs_rx.la.
librx.a remains for LWP applications to use. With this change, all RX
objects are built in both the LWP and pthread cases, so some #ifdef
guards are required to protect code that isn't relevant in a given
build.
Currently, all of our pthreaded objects use libafsrpc to get RX
functionality, so this change is fairly minimal outside of the RX
directory.
Change-Id: I8e629e2319fb1964058e70c3c0c3ed548b09b22d
Reviewed-on: http://gerrit.openafs.org/8058
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Create a pthreaded version of libafsutil, named liboafs_util.la,
and use this library in all of the pthreaded binaries that we build,
replacing both inclusion of libafsutil.a, and direct compliation of
pthreaded versions of the util source files.
libafsutil.a is provided for legacy LWP applications, and the
convenience library libafsutil_pic.a remains until we address the way
in which the user space cache manager is built and linked.
Change-Id: Ibdc3d6e2fe56ca6f5b882cf03991d1a2e32c62b2
Reviewed-on: http://gerrit.openafs.org/8056
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Convert the libcmd and libcmd_pic libaries to being built using
libtool. Historically, these have been built as LWP code, but they
have no LWP dependencies, and no LWP-specific code within them. So,
make cmd a pthread-only library.
In addition to the libtool library liboafs_cmd.la, we build the
legacy libcmd.a and libcmd_pic.a as convenience libraries. libcmd64.a
(a 64bit variant, used solely by kdump), remains built through
"normal" means.
Update pthreaded users of libcmd to use the new liboafs_cmd.la. For
now, non-pthreaded users are left alone.
Change-Id: Id8445949754d1942f6e8752ae182b4e6f86fe94f
Reviewed-on: http://gerrit.openafs.org/8055
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Convert the libafs_comerr library so that it uses libtool.
comerr uses a pthread lock to protect the error tables, so it needs
to be built as both an LWP, and a pthread library (previously, we've
just built it as LWP, which is probably broken on some platforms, as
it won't define -D_REENTRANT)
libafscom_err.a remains as the LWP variant, and all pthreaded code is
modified to use the libtool liboafs_comerr.la library.
Change-Id: Id421cc97ad8681b42af7a5eb3cb512e1e1ce9a90
Reviewed-on: http://gerrit.openafs.org/8054
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: Derrick Brashear <shadow@your-file-system.com>
C90 wants this unsigned hint before it will dtrt
Change-Id: Ic60b0336df7e8c4373582ffa352f4042ebc021c1
Reviewed-on: http://gerrit.openafs.org/8050
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: Derrick Brashear <shadow@your-file-system.com>
It's always good to have a plan.
Also, use correct mask when checking for DCE bit.
Change-Id: I4ab72aeb89efbd63d2d15fdc57aea8d2c1eb13d9
Reviewed-on: http://gerrit.openafs.org/8047
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: Derrick Brashear <shadow@your-file-system.com>
Add a missing line continuation backslash, and use the correct
location for libafs_opr.la
Change-Id: I52e44d36d9e1a9a0b3cd81c463f952072d4cbb48
Reviewed-on: http://gerrit.openafs.org/8045
Tested-by: Jeffrey Altman <jaltman@your-file-system.com>
Reviewed-by: Simon Wilkinson <simonxwilkinson@gmail.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Convert opr so that it uses libtool. For backwards compatibility we
still build libopr.a, but we do so as a static convenience library.
As libopr.a may, in the future, be converted to an LWP library, change
all of the pthreaded binaries so that they link against the libtool
library liboafs_opr.la
Change-Id: Icee04ff4745334f06ffba16df5bb07fc9dcc0b54
Reviewed-on: http://gerrit.openafs.org/8034
Reviewed-by: Derrick Brashear <shadow@dementix.org>
Tested-by: Derrick Brashear <shadow@dementix.org>
Add a function which can be used to obtain a hash of an arbitrary
opaque string of arbitrary length
Change-Id: I9e6aa29fa06a54976b81eda399c8838b73007962
Reviewed-on: http://gerrit.openafs.org/7978
Reviewed-by: Derrick Brashear <shadow@dementix.org>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Add a set of functions to the opr library to handle creating and
manipulating UUIDs.
The opr_uuid_t type is held as a 16 octet character string, which
comprises the UUID encoded into network byte order. This is the
primary form for manipulating UUIDs with this library, as it avoids
any nbo/hbo problems.
For applications which require raw access to the UUID components,
the opr_uuid_unpacked structure is provided, and
opr_uuid_pack/opr_uuid_unpack can be used to convert to and from
this format.
Finally, functions to print the UUID as a string, and parse a UUID
from a string, are provided. When printing, we use the standard UUID
format of 000000-0000-0000-0000-00000000. However, the afsUUID library
used to print UUIDs as 000000-0000-0000-00-00-00000000, so we also
accept this format.
Change-Id: I78ef79b7ab8ae15fb955c6495118722875c94f8d
Reviewed-on: http://gerrit.openafs.org/7977
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@dementix.org>
Lots of our tests want to start a test RPC server, and then run
commands against it. Start to abstract out the code to do this
by pulling the code to start a test RPC server into its own
function in the common test directory.
Change-Id: Ie7fa1fa1984113f3722def17a9fd4b98993bd6ff
Reviewed-on: http://gerrit.openafs.org/7584
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@secure-endpoints.com>
Reviewed-by: Derrick Brashear <shadow@dementix.org>
Fix the configuration file path for the cmd test so that it works
when invoked from runtests
Change-Id: Id7d717e163abf5cfab2d551aaf08fb9967a87153
Reviewed-on: http://gerrit.openafs.org/7576
Reviewed-by: Derrick Brashear <shadow@dementix.org>
Tested-by: Derrick Brashear <shadow@dementix.org>
Add a simple time type to the opr library, which provides helper
routines to implement the 100ns time format selected for on-the-wire
use for AFS-3 (this also provides a handy single integer internal
time format)
Change-Id: I1f2d81e61a3e4124e0dd49830a115b72d7a7b37f
Reviewed-on: http://gerrit.openafs.org/7559
Reviewed-by: Derrick Brashear <shadow@dementix.org>
Tested-by: Derrick Brashear <shadow@dementix.org>
With this change, we gain the ability to set our command line options
from krb5.conf configuration files. This is only available for tools
which are implemented using the new cmd_OptionAs accessor methods.
Callers should load their configuration file using
cmd_OpenConfigFile("/path/to/config/file.conf");
(an addition to libauth to return a path to a system wide
configuration file will be forthcoming)
and then set their command name (for example, "fileserver", "afsd",
"vos" and so on) using
cmd_SetCommandName("mycommand");
The accessor functions will then populate their return values with
either:
a) The command line options, if specified
b) The contents of the tag matching the option name, in the
[command_subcommand] section of the configuration file, if it
exists
c) The contents of the same tag, in the [command] section of the
configuration file, if it that exists.
d) The contents of the same tag in the [defaults] section of the
configuration file.
Callers can also gain access to the entire configuration file by
calling cmd_RawFile, or to just the section corresponding to their
command line by calling cmd_RawSection. Note that when using the file
directly, it is up to callers to preserve consistency by implementing
similar inheritance rules as the above.
Change-Id: Ic501ab296af3638f961486869af79c9ce47b77b8
Reviewed-on: http://gerrit.openafs.org/7135
Reviewed-by: Derrick Brashear <shadow@dementix.org>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Add additional tests to the libcmd test suite to verify the
behaviour of cmd_OptionPresent and cmd_OptionAsList
Change-Id: I81a235fb5ee87682c72ca942f1341f77be6fda39
Reviewed-on: http://gerrit.openafs.org/7392
Reviewed-by: Derrick Brashear <shadow@dementix.org>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Instead of bundling our own copies of Russ's C TAP Harness, start using
source pulled from his git repository using the src/external import
mechanism. Note that we are not currently building the floating
point (is_double) portion of the harness.
In the process of doing so, we also upgrade our test harness to the latest
upstream version, 1.11. This is somewhat problematic, as there have been
some significant code changes since the version bundled with OpenAFS.
Work around these by
*) Referencing the basic.h header as <tests/tap/basic.h>, rather than
just <tap/basic.h>, to match the new upstream layout
*) Changing the include path so that the tests/ directory can be
found within it.
Change-Id: I63efbb30248165e5729005b0a791e7eb7afb051d
Reviewed-on: http://gerrit.openafs.org/7374
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Russ Allbery <rra@stanford.edu>
Reviewed-by: Derrick Brashear <shadow@dementix.org>
Change the command test so that it uses an enum, rather than #defines
for offsets into the parms array. This is mainly a cosmetic change, but
brings the test suite into line with the way that we're doing stuff in
the "real" code.
Change-Id: Ia9d72e13230edd4fe13af52ba6816cf775693c36
Reviewed-on: http://gerrit.openafs.org/7133
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Andrew Deason <adeason@sinenomine.net>
Reviewed-by: Tom Keiser <tkeiser@sinenomine.net>
Reviewed-by: Derrick Brashear <shadow@dementix.org>
The vos test wasn't running correctly from runtests, as it contained
a relative path which assumed that the CWD was tests/volser, rather
than tests/
Modify this to use the BUILD environment variable when invoked from
runtests, and also add an exit after the exec(), so that if we do
fail to launch the binary we don't have two processes both running
the same code.
Change-Id: I7b2d7e6a517e9e9f74f15803da7507037671226a
Reviewed-on: http://gerrit.openafs.org/7265
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil>
Reviewed-by: Derrick Brashear <shadow@dementix.org>
Move the token faking code out of superuser-t.c into its own file in
tests/common, so it can be used by other tests.
Change-Id: I7b420250ef974b4b80a8dde692d2666657bb82ca
Reviewed-on: http://gerrit.openafs.org/7259
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@dementix.org>
The StopVLServer function can be used to stop any server for which
we know the pid. So, rename it as afstest_StopServer to make this
apparent.
Change-Id: Ia5973342e81dc15a698e84e69b314cd6157831f7
Reviewed-on: http://gerrit.openafs.org/7258
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@dementix.org>
Abstract out the code which the volser test uses to produce a
ubik client so that it can be used to test other ubik services
Change-Id: I800fda9e53ad45c91f3de8eceea387cc011dda3c
Reviewed-on: http://gerrit.openafs.org/7257
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@dementix.org>
Add the missing volser/vos test, and fix it so that the plan is correct
Change-Id: I017679176f5df8fb18002175a75ac0dcd108aded
Reviewed-on: http://gerrit.openafs.org/7255
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@dementix.org>
Use the rxperf performance testing tools to add a couple of simple
RX tests. The first moves 1Mbyte of data backwards and forwards 30
times. The second starts 30 threads, which each move 1MByte of data
once.
This is by no means an exhaustive test of RX, but the single and
multi-threaded invocations should provide a useful smoke test if
things get very broken.
Change-Id: I11267be067cf6c05a20aeb90a18ed4031502a1b1
Reviewed-on: http://gerrit.openafs.org/7244
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@dementix.org>
When the hcrypto/des header was removed from our installed headers, it
wasn't added back in to the superuser test. Add it now, so that the test
can build.
Change-Id: I38023ee94abe801f6f2313b492e4f80855001c41
Reviewed-on: http://gerrit.openafs.org/7243
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@dementix.org>
Add krb.conf and krb.excl support to the auth cell configuration
library. Provide a function to determine if the user is local to the
cell. Provide a function to set the local realms during application
initialization. These changes are intended to replace the functions
afs_krb_get_lrealm and afs_is_foreign_ticket_name.
Change-Id: Iba57e9ffc2c958f3a4565a9352ce172189276ce9
Reviewed-on: http://gerrit.openafs.org/5744
Reviewed-by: Derrick Brashear <shadow@dementix.org>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
