If the build directory happened to contain shell metacharacters, like
the ~ in /build/openafs-vb8tid/openafs-1.8.0~pre1 used by the Debian
builders, Perl was running softsig-helper via an intermediate sh -c,
which would then intercept the signals we tried to send to
softsig-helper. Use the list syntax to avoid this sh -c.
Change-Id: I054b9c8f606e197accb414bfe3f89719255c62c4
Reviewed-on: https://gerrit.openafs.org/12488
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
No need to leave the shell process hanging around.
In particular, if we are manually running softsig-helper under
libwrap to debug test failures, the child process of the shell is
another shell, which interprets some signals that we wanted to
be passed through, like SIGTERM. On the other hand, once the
softsig-helper is exec()'d, you basically need another shell to
terminate it, which is a different problem....
Change-Id: Iff7c519886a018cb68e692746d40c427b6299457
Reviewed-on: https://gerrit.openafs.org/12490
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Anders Kaseorg <andersk@mit.edu>
Tested-by: Anders Kaseorg <andersk@mit.edu>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Fix the loop condition when scanning the signal number to name table to
convert a signal number to a name. Instead of looping sizeof(size_t)
times, loop for the number of elements in the table.
This bug was masked on 64 bit-platforms, since the signal number to name
table table currently has 8 elements, which is coincidently the same as
sizeof(size_t) on 64-bit platforms. The bug becomes apparent on 32-bit
systems; only the first 4 elements of the table are checked.
Example error output before this fix:
$ cd tests
$ ./libwrap ../lib ./runtests -o opr/softsig
1..11
ok 1
ok 2
ok 3
ok 4
ok 5
not ok 6
# Failed test in ./opr/softsig-t at line 57.
# got: 'Received UNK
# '
# expected: 'Received TERM
# '
not ok 7
# Failed test in ./opr/softsig-t at line 60.
# got: 'Received UNK
# '
# expected: 'Received USR1
# '
not ok 8
# Failed test in ./opr/softsig-t at line 63.
# got: 'Received UNK
# '
# expected: 'Received USR2
# '
ok 9 - Helper exited on KILL signal.
ok 10 - Helper exited on SEGV signal.
ok 11 # skip Skipping buserror test; SIGBUS constant is not defined.
# Looks like you failed 3 tests of 11.
Change-Id: I863cc9f3650c4a5e9ac9159d90e063b986a8460a
Reviewed-on: https://gerrit.openafs.org/12367
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
This fixes test failures observed on new Debian build servers that no
longer install tzdata by default. As the tests expect, EST is defined
as UTC−05:00 with no daylight saving time.
Change-Id: Ida8cb33687b5d87761cb0422e446afd99246d47a
Reviewed-on: https://gerrit.openafs.org/12414
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Some libc implementations will crash when NULL string arguments are given to
*printf. Avoid passing NULL string arguments in the make check tests that did
so, and pass the string "(null)" instead.
Change-Id: I65f11a3eef88d1c7b210c867ae0c40018160f55a
Reviewed-on: https://gerrit.openafs.org/12377
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Older versions of the perl POSIX module do not define the SIGBUS symbol, which
causes the opr/softsig-t perl test to fail to compile. Instead of trying to
defined SIGBUS, which may be platform dependent, skip the buserror unit test on
these older platforms.
Change-Id: Ib8cfd77215ea43566e9d47b501d4989556b83734
Reviewed-on: http://gerrit.openafs.org/12186
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
In order to start the softsig test helper properly,
the full path of this program is necessary.
FIXES 132246
Change-Id: I4e9ff1e62a0b82078338eeaf0d4368ac1b35dccc
Reviewed-on: http://gerrit.openafs.org/11977
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Michael Meffie <mmeffie@sinenomine.net>
Tested-by: Michael Meffie <mmeffie@sinenomine.net>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Resolves this warning:
keys-t.c: In function ‘copy’:
keys-t.c:63:6: warning: ignoring return value of ‘write’, declared with attribute warn_unused_result [-Wunused-result]
write(out, block, len);
^
Change-Id: If2427f2658b428091ffba3d11643ad95f193a67d
Reviewed-on: http://gerrit.openafs.org/11957
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Resolves this warning:
vos-t.c: In function ‘TestListAddrs’:
vos-t.c:60:5: warning: ignoring return value of ‘pipe’, declared with attribute warn_unused_result [-Wunused-result]
pipe(outpipe);
^
Change-Id: I7eb58a91b5a7d9df18a4952400f74c79299e857d
Reviewed-on: http://gerrit.openafs.org/11958
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Resolves this warning on 32-bit GCC:
jhash-t.c: In function ‘main’:
jhash-t.c:60:4: warning: this decimal constant is unsigned only in ISO C90
is_int(3704403432, opr_jhash(test, 2, 0),
^
jhash-t.c:62:4: warning: this decimal constant is unsigned only in ISO C90
is_int(3704403432, opr_jhash_int2(test[0], test[1], 0),
^
Change-Id: Ie3ab0f5aacdc719fa63f32e545b5863ec351f5eb
Reviewed-on: http://gerrit.openafs.org/11961
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Resolves this warning with clang:
time-t.c:46:8: warning: absolute value function 'abs' given an argument of type 'long' but has parameter of type 'int' which may cause
truncation of value [-Wabsolute-value]
ok(abs(osTime - osNow) < 2, "opr_time_Now returns a reasonable value");
^
time-t.c:46:8: note: use function 'labs' instead
ok(abs(osTime - osNow) < 2, "opr_time_Now returns a reasonable value");
^~~
labs
Change-Id: Ib98069e1349161d936c8ada0e69f9b33d2f71ce3
Reviewed-on: http://gerrit.openafs.org/11965
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Signals and pthreaded applications are a poor match. OpenAFS has had
the softsig system (currently in src/util/softsig.c) in an attempt to
alleviate some of these problems. However, that implementation itself
has a number of problems. It uses signal functions that are unsafe in
pthreaded applications, and uses pthread_kill within its signal
handlers. Over the years it has been responsible for a number of
portability bugs.
The old implementation continues to receive signals in the main thread
of the application. However, the handler code is run within a seperate
signal handler thread. When the main thread receives a signal a stub
handler is invoked, which simply pthread_kill()s the signal handler
thread.
The new implementation simplifies things by only receiving signals in
the handler thread. It uses only pthread-compatible signal functions,
and invokes no code from within async signal handlers.
A complete test suite is supplied.
Change-Id: I4bac68c2f853f1e7578b54ddced3833a97dd3f82
Reviewed-on: http://gerrit.openafs.org/6947
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Chas Williams <3chas3@gmail.com>
Reviewed-by: Daria Brashear <shadow@your-file-system.com>
The MT_LIBS library list already includes XLIBS, so there's no need
to specify both on a link line.
Change-Id: I8594b1b6e1a16af741b40822cbce49e846b26f49
Reviewed-on: http://gerrit.openafs.org/8904
Reviewed-by: Daria Brashear <shadow@your-file-system.com>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
The return value of asprintf() is the number of bytes printed, or -1 if there
was an error allocating a large enough buffer. In the latter case, the value
of the result string is undefined, and so it cannot be counted on to be NULL.
This change fixes numerous places where the result of asprintf is checked
incorrectly (by examining the output pointer and not the return value) or not
at all.
Change-Id: I9fef14d60c096795d59c42798f3906041fb18c86
Reviewed-on: http://gerrit.openafs.org/9978
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Reviewed-by: D Brashear <shadow@your-file-system.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
'make clean' and 'make maintainer-clean' still leave around a fair
number of droppings, prior to this commit.
We were not descending into the 'tests' top-level directory while
cleaning. Furthermore, tests/opr/Makefile needed $(LT_CLEAN), and
tests/rx/Makefile needed to spell it correctly.
The libtoolization places a lot of files to be removed in the
'pristine' target.
The processing used to implement the =include directive in the pod
sources for the man pages leaves around the non-.in versions of
files; we should clean that up in the 'pristine' target as well.
The 'pristine' target should likewise remove the man pages which
are generated from the pod files.
Additionally, the documentation build uses a Doxyfile which is
output by configure; that should be removed (if present) by the
'distclean' target.
When hcrypto was converted to libtool, the use of ${OBJECTS} in
the clean target was missed, so we were leaving around most of the
actual object files -- $(LT_CLEAN) does not handle this for us.
Change the rule to remove *.o as is done elsewhere.
The conversion of libafsrpc to libtool added a convenience library
libafsrpc_sys.la, and changed how syscall.o was generated on
most architectures, to be the result of compiling an empty .c file
(instead of just an empty .o file). This introduced a new
intermediate file, syscall.c, which must be cleaned up.
tvolser was only listing volserver and not vos in its list of
executables to remove while cleaning.
The conversion of venus/test to libtool was not done quite right.
Makefile.libtool and the .lo suffix are only needed when libtool
is being used to link *libraries*; just Makefile.pthread suffices
when libtool is being used to link executables. As such, remove
the inclusion of Makefile.libtool, and change the .lo targets back
to regular .o ones, and add back *.o to the list of files to remove
in the 'clean' target (it was needed there even without the
other changes to that Makefile).
Change-Id: Ifbc3eee4ad2dce54df991301bc5edd11eb29a24a
Reviewed-on: http://gerrit.openafs.org/11532
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Add the flags argument to cmd_CreateSyntax() and update all callers.
The flags argument will be used to set command options, such as
CMD_HIDDEN.
Change-Id: Ia51be9635f262516cb084d236a9e0756f608bf16
Reviewed-on: http://gerrit.openafs.org/11430
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
'main' in fmt-t.c was declared as a prototype-less function, which
triggers a warning, which is an error with --enable-checking. Fix it
by declaring 'main' properly.
Change-Id: I45cfec591acd0ef8d7836c79e997e8ffe29b9e38
Reviewed-on: http://gerrit.openafs.org/11539
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil>
Reviewed-by: Nathaniel Filardo <nwfilardo@gmail.com>
We don't have a man page for the 'version' subcommand, which has
"always" been present but only recently was exposed to the usage.
It's okay to not have a man page for it, so tell the test infrastructure
to not complain about its absence.
Change-Id: Ife834d41797d1d1efe403b204736ac85d62724e9
Reviewed-on: http://gerrit.openafs.org/11452
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Reviewed-by: D Brashear <shadow@your-file-system.com>
Tested-by: D Brashear <shadow@your-file-system.com>
The order of the parameters was swapped, which recent gcc complains
loudly about.
Change-Id: I2329ca3dd0eee81639731e78172621b580199024
Reviewed-on: http://gerrit.openafs.org/11451
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
This is to be used by the (coming next) vos-foreach utility, but it seemed
sufficiently general and useful to break out into its own free-standing
component.
Change-Id: I92c3a615fecb80e1766f78492b229a826a23e18a
Reviewed-on: http://gerrit.openafs.org/10965
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Reviewed-by: D Brashear <shadow@your-file-system.com>
Don't assume that converting a UUID to a string will always succeed.
Instead, opr_uuid_toString should return a status result to indicate
whether the operation was successful or not.
Change-Id: I49e6bf53b2a878342d3137510d2eca522e58604d
Reviewed-on: http://gerrit.openafs.org/9990
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Make afstest_UnlinkTestConfig clean up and remove the specified
directory regardless of which files are present. This means
the function no longer has to track the current state of which
files may be present as tests are added and modified.
A sanity check is added to prevent damage in case the function is
called for an inappropriate directory.
As before, no cleaning is done if the test is run outside of a
"make check".
Change-Id: Idd092040496aaa2566c8693496fefd7d6f247565
Reviewed-on: http://gerrit.openafs.org/9703
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Split the man page check routine into two routines; one to get the list
of sub-commands for a command, and another to verify a man page exists
for each sub-command. Use the list of sub-commands to set up the
Test::More plan before running the tests.
Setting the plan before running the tests allows the the man page tests
to run on systems which ship older versions the Test::More module.
Change-Id: I1ed6fb87989e1deff4696562f3b917140592ed17
Reviewed-on: http://gerrit.openafs.org/9835
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Ken Dreyer <ktdreyer@ktdreyer.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Export the posix signal constants in the rx/perf perl test. Fixes a
perl syntax error on solaris.
Change-Id: Iaad361b8533787f9ad97fa00221e01e687f50723
Reviewed-on: http://gerrit.openafs.org/9836
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
In the case of a host where gethostbyname is unable to resolve
the hostname, afstest_BuildTestConfig() may return NULL which
can cause several tests to crash.
Add a common function to look out for this condition and use it where
appropriate. When it occurs, the current module is skipped and
the user gets an error message that indicates the configuration
problem.
Change-Id: I7216876eb2424368f415e5759e2b95009ad055b2
Reviewed-on: http://gerrit.openafs.org/9120
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Use liboafs_auth.la directly, rather than using libafsauthent, to
build the auth tests
Change-Id: Idf0e7a32626802b6113d21833ded09d9e20e3659
Reviewed-on: http://gerrit.openafs.org/9023
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Fix the trailing whitespace and leading spaces
before tabs in the readme files.
Change-Id: If20e528ddb28f82e4d3d1b1f03dec8670f914afc
Reviewed-on: http://gerrit.openafs.org/8877
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Michael Meffie <mmeffie@sinenomine.net>
Reviewed-by: Ken Dreyer <ktdreyer@ktdreyer.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Change rxevent_Put so that it takes a pointer to the event being
put, and NULLs that pointer. This removes a lot of duplicate code
in callers, as well as making it harder to reuse a discarded event.
Change-Id: Ib7a51f01687e08ea3dced5932ec9ec27797a784a
Reviewed-on: http://gerrit.openafs.org/8540
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Many different structures can be passed to the rxevent package as
data. Don't give calls special treatment by making rxevent aware of
how to release their reference counts when an event is cancelled.
Update all of the callers of rxevent_Cancel to use the new arguments,
and where they were cancelling functions with calls as parameters add
the appropriate CALL_RELE directives. In many cases, this has led to
new helper functions to cancel particular call-based events.
Change-Id: Ic02778e48fd950e8850b77bd3c076c235453274d
Reviewed-on: http://gerrit.openafs.org/8538
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
opr_queue_IsEnd's implementation was incorrect - it would return
true when the element was the last item in the list, not when it
was the end of the list (equal to the head record)
Correct the implementation of isEnd, and add an implementation for
isLast.
This fixes a bug in RX, wher we would never notice that the last
packet in the transmit queue was acknowledged, because the loop that
iterates over the queue uses isEnd to detect when its work is done.
Change-Id: I8966e05c479c18d025bb5cc4cf77514ce002be95
Reviewed-on: http://gerrit.openafs.org/8493
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Add a simple implementation of a dictionary/hash structure based around
opr queues and the jhash hashing function.
Change-Id: I4ae5cafcef377b05c8caa7c455737a992b1d36cd
Reviewed-on: http://gerrit.openafs.org/8355
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Add a function to jhash that can be used to hash a pair of unsigned
integers (or other stuff that can cast to them) without having to build
up an array.
Provide a couple of tests for the new function
Change-Id: I594848f64316fb459eff565933691f560512ca79
Reviewed-on: http://gerrit.openafs.org/8354
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
The change to cleanup temporary files after tests
(0c3670914a) broke all attempts
to run the tests using libwrap, as it would cause libwrap to run
the binary named "MAKECHECK=1"
Move the variable defintion before the libwrap invocation to fix this.
Change-Id: I330267c9b53483abccf43d60a7dc8f8d973c3959
Reviewed-on: http://gerrit.openafs.org/8356
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: Derrick Brashear <shadow@your-file-system.com>
Call the configuration directory cleanup function before exiting
so there are no files left behind, even in case of error.
Add KeyFileExt to the list of files that are removed.
Change-Id: Ie795bef0d44609b36950970244c02a6c6da1a843
Reviewed-on: http://gerrit.openafs.org/8142
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Simon Wilkinson <simonxwilkinson@gmail.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
This reverts commit 94bf003a72.
The fuse tests are fundamentally broken as they stand:
*) They rely on files that have not been committed to the tree. To
function correctly the file fuse/conf/CellServDB must be present
*) They always run, regardless of whether the fuse helper binaries are
installed on the developers system, or even on whether the tree was
built with fuse support enabled.
*) They pass, even if fuse fails to start up
*) The file fuse.sh is committed, despite being unused. This is
particularly confusing, as it looks like this is where the tests
are performed from (its not, testing is done in dynroot-t)
*) fuse-log should be either cleaned up, or flagged as ignored in
.gitignore
Revert the commit until such time as all these issues can be fixed
Change-Id: I5ff9a95f33c0a5d0614bb47c521a8770d92fe2eb
Reviewed-on: http://gerrit.openafs.org/8230
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Reformat the loopback tests to match our house style - 4 spaces for
first indent, a tab for the second, and so on, opening brace of a
function on a newline, spaces around assignments, and so on.
Change-Id: I54f168ca143e7ff46c9d82289331b8314849f848
Reviewed-on: http://gerrit.openafs.org/8229
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Remove the unused h_errno extern, which in turn removes the need
for disabling strict prototype warnings in the Makefile
Use roken.h, instead of hardcoding system libraries
Change-Id: Ie654c77ff60ed14fc3b659fa3eb527535be71164
Reviewed-on: http://gerrit.openafs.org/8228
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Update makefiles to have 'make test' and 'make check' use the
_nolibafs build version, since there are no tests that (currently)
require the AFS kernel module to be built.
Clean up fuse test copyright notice, Alphabetize configure.ac
Change-Id: Icc95dd3393cd66f0d04fa5f6e8f806db60ca031e
Reviewed-on: http://gerrit.openafs.org/8135
Reviewed-by: Troy Benjegerdes <hozer-gerrit@hozed.org>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Avoid the problems with libopr's dependencies by just converting
the tests to use the libtool version of the opr library. While we're
at it, make the tests pthreaded too.
Change-Id: I4e570b288ea57c758c848be1d545e5ee59771ab9
Reviewed-on: http://gerrit.openafs.org/8127
Reviewed-by: Jason Edgecombe <jason@rampaginggeek.com>
Tested-by: Jason Edgecombe <jason@rampaginggeek.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
The volser Makefile had a bad path for liboafs_util, and was still
directly pulling in some objects from the fileserver build. Fix it
so that it uses proper libraries.
Change-Id: Ic36c6a0f93c299bd04d48fa4238c4da5cbc571d4
Reviewed-on: http://gerrit.openafs.org/8125
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jason Edgecombe <jason@rampaginggeek.com>
Tested-by: Jason Edgecombe <jason@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Return of an exit status of zero when running commands with -help,
instead of returning an error. By general convention, and in
previous versions, tools do not not treat -help as an error.
The AFS::Command perl modules, use -help as an introspection
technique, and fail when commands run with the -help option returns
non-zero.
Change-Id: I6ecd95f6ccd07218a2657dbb4dbf1c13599159f4
Reviewed-on: http://gerrit.openafs.org/8087
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Reviewed-by: Simon Wilkinson <simonxwilkinson@gmail.com>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Build a pthreaded, libtool, version of librx.a called liboafs_rx.la.
librx.a remains for LWP applications to use. With this change, all RX
objects are built in both the LWP and pthread cases, so some #ifdef
guards are required to protect code that isn't relevant in a given
build.
Currently, all of our pthreaded objects use libafsrpc to get RX
functionality, so this change is fairly minimal outside of the RX
directory.
Change-Id: I8e629e2319fb1964058e70c3c0c3ed548b09b22d
Reviewed-on: http://gerrit.openafs.org/8058
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Create a pthreaded version of libafsutil, named liboafs_util.la,
and use this library in all of the pthreaded binaries that we build,
replacing both inclusion of libafsutil.a, and direct compliation of
pthreaded versions of the util source files.
libafsutil.a is provided for legacy LWP applications, and the
convenience library libafsutil_pic.a remains until we address the way
in which the user space cache manager is built and linked.
Change-Id: Ibdc3d6e2fe56ca6f5b882cf03991d1a2e32c62b2
Reviewed-on: http://gerrit.openafs.org/8056
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Convert the libcmd and libcmd_pic libaries to being built using
libtool. Historically, these have been built as LWP code, but they
have no LWP dependencies, and no LWP-specific code within them. So,
make cmd a pthread-only library.
In addition to the libtool library liboafs_cmd.la, we build the
legacy libcmd.a and libcmd_pic.a as convenience libraries. libcmd64.a
(a 64bit variant, used solely by kdump), remains built through
"normal" means.
Update pthreaded users of libcmd to use the new liboafs_cmd.la. For
now, non-pthreaded users are left alone.
Change-Id: Id8445949754d1942f6e8752ae182b4e6f86fe94f
Reviewed-on: http://gerrit.openafs.org/8055
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Convert the libafs_comerr library so that it uses libtool.
comerr uses a pthread lock to protect the error tables, so it needs
to be built as both an LWP, and a pthread library (previously, we've
just built it as LWP, which is probably broken on some platforms, as
it won't define -D_REENTRANT)
libafscom_err.a remains as the LWP variant, and all pthreaded code is
modified to use the libtool liboafs_comerr.la library.
Change-Id: Id421cc97ad8681b42af7a5eb3cb512e1e1ce9a90
Reviewed-on: http://gerrit.openafs.org/8054
Reviewed-by: Derrick Brashear <shadow@your-file-system.com>
Tested-by: Derrick Brashear <shadow@your-file-system.com>
