New functionality was added to the audit facility that allows multiple
audit logs. The updated audit interfaces require a specific calling
sequence even if multiple audit logs are not used.
Support for multiple auditlogs is not supported for kauth. Since kauth
does not use libcmd for processing the command line, and adding support
for multiple audit log instances requires additional effort, that is not
warranted.
Update kauth to follow the proper calling sequences for the audit
facility.
Update help message and manpage entries for -auditlog and
-audit-interface. Make note that multiple -auditlogs are not supported.
Change-Id: I98111b1e399e6687fde235bc2eadf0a28fa8acf4
Reviewed-on: https://gerrit.openafs.org/13782
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Gerrits #13774 (audit: Support multiple audit interfaces and interface
options) and #13775 (audit: Add cmd helper for processing audit options)
added support in the audit facility for multiple audit logs.
Add command line support to use multiple audit logs for daemons that use
libcmd for command line processing: bosserver, buserver, butc,
fileserver, volserver, ptserver, and vlserver.
Update the daemons to add a call to audit_open, and where possible add a
call to audit_close when shutting down the daemon.
Update help message and manpage entries for -auditlog and
-audit-interface
Change-Id: I4356e1aa84f580897a0e788e2a2829685be891aa
Reviewed-on: https://gerrit.openafs.org/13776
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Commit 0c03f8607e15 vos-command-enhancements-20011008 introduced the
'vos restore' -readonly option, which allows the restored volume to be
RO instead of the default RW. The commit message documents the
following restriction:
- ... This option causes the restored volume to be an RO volume. It is
not permitted to restore an RO volume when the associated RW volume
already exists. While it is possible to restore an RW volume where an
RO volume exists, caution should be used to avoid doing this with VLDB
entries created by 'vos restore -readonly', since such entries have
their ROVOL and RWVOL ID's set to the same thing.
Document this restriction in the 'vos restore' man page, and in a code
comment.
No functional change is incurred by this commit.
Change-Id: I34f6c5434b82da538a38a9d219207b33dcf62b17
Reviewed-on: https://gerrit.openafs.org/14348
Reviewed-by: Andrew Deason <adeason@sinenomine.net>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Numerous types and constants are defined in our various RPC-L files
that are never used or referenced by anything. Remove them.
Change-Id: I0b03be1ce0e186a88f80d2f3f7a66a1e25965ff3
Reviewed-on: https://gerrit.openafs.org/14404
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Historically xstat_cm_test and xstat_fs_test have supported option
'-period <mm>' to specify continuous operaiton for a length of time. If
'-period 0' was specified, both programs exited immediately.
Beginning with commits 2c1a7e47336c8f8d14dd6c65d53925a9e0e87c66 'xstat:
add xstat_*_Wait functions' and 6b67cac432043a43d7cdfa6af972ab54412aff94
'convert xstat and friends to pthreads', xstat_cm_test and xstat_fs_test
now support -period 0 to run "forever". This support is implemented in
xstat_cm_Wait and xstat_fs_Wait, respectively. Although the "wait
forever" logic was added to allow consolidation of similar code in
afsmonitor, it also changed how xstat_cm_test and xstat_fs_test behave
for '-period 0'.
Unfortunately, there is a bug in this support, at least when running on
pthreads. After the initial 24 minute timer expires, the while (1) will
repeatedly run select with a timeout that is now 0. This causes the
while loop to consume 100% of the CPU on which this thread is
dispatched.
Instead, modify the wait-forever logic to specify NULL for the select()
timeout value. Also update the man page to document that '-period 0'
means forever.
Change-Id: I25d0d5be0eedb8bf3de495785b9b03a3e3d45221
Reviewed-on: https://gerrit.openafs.org/14366
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Currently, the volserver SAFSVolDump RPC and the 'voldump' utility
handle short reads from pread() for vnode payloads by padding the
missing data with NUL bytes. That is, if we request 4k of data for our
pread() call, and we only get back 1k of data, we'll write 1k of data
to the volume dump stream followed by 3k of NUL bytes, and log
messages like this:
1 Volser: DumpFile: Error reading inode 1234 for vnode 5678
1 Volser: DumpFile: Null padding file: 3072 bytes at offset 40960
This can happen if we hit EOF on the underlying file sooner than
expected, or if the OS just responds with fewer bytes than requested
for any reason.
The same code path tries to do the same NUL-padding if pread() returns
an error (for example, EIO), padding the entire e.g. 4k block with
NULs. However, in this case, the "padding" code often doesn't work as
intended, because we compare 'n' (set to -1) with 'howMany' (set to 4k
in this example), like so:
if (n < howMany)
Here, 'n' is signed (ssize_t), and 'howMany' is unsigned (size_t), and
so compilers will promote 'n' to the unsigned type, causing this
conditional to fail when n is -1. As a result, all of the relevant log
messages are skipped, and the data in the dumpstream gets corrupted
(we skip a block of data, and our 'howFar' offset goes back by 1). So
this can result in rare silent data corruption in volume dumps, which
can occur during volume releases, moves, etc.
To fix all of this, remove this bizarre NUL-padding behavior in the
volserver. Instead:
- For actual errors from pread(), return an error, like we do for I/O
errors in most other code paths.
- For short reads, just write out the amount of data we actually read,
and keep going.
- For premature EOF, treat it like a pread() error, but log a slightly
different message.
For the 'voldump' utility, the padding behavior can make sense if a
user is trying to recover volume data offline in a disaster recovery
scenario. So for voldump, add a new switch (-pad-errors) to enable the
padding behavior, but change the default behavior to bail out on
errors.
Change-Id: Ibd6e76c5ea0dea95e3354d9b34536296f81b4f67
Reviewed-on: https://gerrit.openafs.org/14255
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Cheyenne Wills <cwills@sinenomine.net>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
The UV_RenameVolume() function first updates the volume name in the
VLDB, then read-write volume header and backup volume header, and
finally all of the read-only volume headers. If this function is
interrupted or a remote site is not reachable, the names in some of the
volume headers will be out of sync with name in the VLDB entry.
The implementation of UV_RenameVolume() is idempotent, so can be safely
called with the same name as in the volume's VLDB entry. This could be
used to bring all the names in the volume headers in sync with the name
in the VLDB.
Unfortunately, due to the check of the -newname parameter, vos
rename will not invoke UV_RenameVolume() when the name in the VLDB has
already been changed. The vos rename command attempts to verify the
desired name (-newname) is available before invoking UV_RenameVolume()
by simply checking if a VLDB entry exists with that name, and
incorrectly assumes when a VLDB entry exists with that name it is an
entry for a different volume.
Change the -newname check to allow vos rename to proceed when name has
already been set in the VLDB entry of the volume being renamed. This
allows admins to run vos rename command to complete a previously
incomplete rename operation and bring the names in the volume headers in
sync with the name in the VLDB entry.
Note: Before this commit, administrators could workaround this vos
rename limitation by renaming the volume twice, first to an unused
volume name, then to the actual desired volume name.
Remove the useless checks of the code1 return code after exit in
the RenameVolume() function. These checks for code1 are never performed
since the function exits early when the first VLDB_GetEntryByName()
fails for any reason.
Update the vos rename man page to show vos rename can be used to fix
previously interrupted/failed rename. Also document the -oldname
parameter accepts a numeric volume id to specify the volume to be
renamed.
Change-Id: Ibb5dbe3148e9b8295347925a59cd7bdbccbe8fe0
Reviewed-on: https://gerrit.openafs.org/13720
Reviewed-by: Cheyenne Wills <cwills@sinenomine.net>
Reviewed-by: Andrew Deason <adeason@sinenomine.net>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Commit e5b1e6f1 (Add rxgk client options to vl and pt utilities) added
a couple of new command-line options related to rxgk, but didn't add
them to the relevant man pages.
Add a brief description of these new options to the manpages for pts,
vos, ptserver, and vlserver.
Change-Id: I2d9bfdeb0a31d396740ca2a4d42e14c025b6f79e
Reviewed-on: https://gerrit.openafs.org/13947
Reviewed-by: Cheyenne Wills <cwills@sinenomine.net>
Reviewed-by: Andrew Deason <adeason@sinenomine.net>
Tested-by: Andrew Deason <adeason@sinenomine.net>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Add the new option -admin-write to allow write requests from superusers
on file servers running in readonly mode (-readonly). This lets sites
run fileservers in readonly mode for normal users, but allows members of
the system:administrators group to modify content.
Change-Id: Id8ed3513a748815c07cb98e426c1d21ac300b416
Reviewed-on: https://gerrit.openafs.org/13707
Reviewed-by: Andrew Deason <adeason@sinenomine.net>
Tested-by: Andrew Deason <adeason@sinenomine.net>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Since the introduction of rxkad-k5 in response to OPENAFS-SA-2013-003,
it is not strictly necessary to configure libkrb5 to allow weak crypto
in order to obtain an AFS token. A sufficient amount of time has passed
since then that it is safe to assume that the default behavior is the
more-secure one, and require opt-in for the insecure behavior.
To indicate that the use of single-DES is quite risky, add the
"-insecure_des" argument to both klog and aklog, to gate the
preexisting calls that enable weak crypto/single-DES.
These calls, and the -insecure_des option, may be removed entirely
in a future commit.
Change-Id: If175d0f95f0ede0f252844086a2a023da5580732
Reviewed-on: https://gerrit.openafs.org/13689
Reviewed-by: Michael Meffie <mmeffie@sinenomine.net>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Tested-by: Benjamin Kaduk <kaduk@mit.edu>
Add a new command, 'add-random', to allow the creation of a new key
with random data. This is helpful for certain rxgk keys, which only
need to exist in KeyFileExt and not in any other database (like a krb5
KDC), and so aren't derived from a krb5 keytab.
Change-Id: I1f3b27e074b0931deb8645f7550e0b315d82e249
Reviewed-on: https://gerrit.openafs.org/12768
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
The current 'delete' command from asetkey only lets the user delete
old-style rxkad keys. Add a couple of new variants to allow specifying
the key type and subtype, so the user can delete specific key types
and enctypes if they want.
Change-Id: If0dfaa70ea0b749dadd52a6b7d62fd3ad2b61d18
Reviewed-on: https://gerrit.openafs.org/12767
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
This should fix a build failure reported on the openafs-devel list
today.
Change-Id: I227922f78aaa614b73dd1f5c1c61116168fc0b69
Reviewed-on: https://gerrit.openafs.org/13533
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
The klog.krb5 -lifetime option was copied from earlier versions of log
and klog, which had the ability to set the krb4 token lifetime. However,
the -lifetime option is not feasible the krb5 version, and so is not
implemented in klog.krb5.
Update the klog.krb5 man page to document the -lifetime option has no
effect. Remove the code which unnecessarily checks the unused klog.krb5
-lifetime command line argument.
The unused lifetime variable was discovered by Pat Riehecky using the
clang scan-build static analyzer.
Change-Id: I5f459ec46eaff87a69ccdf7de386a671d0944a5a
Reviewed-on: https://gerrit.openafs.org/13309
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: PatRiehecky <jcpunk@gmail.com>
Reviewed-by: Michael Meffie <mmeffie@sinenomine.net>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
The last valid partition name supported by OpenAFS is /vicepiu, not
/vicepiv. Update the docs and man pages to say so.
Change-Id: I6e1cce775d332d76f605a26f16502c651461994b
Reviewed-on: https://gerrit.openafs.org/13177
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Use the standard routine to pick a client security object, instead of
always assuming rxnull. Respect -localauth as well as being able to
use the current user's tokens, but also provide a -nobutcauth argument
to fall back to the historical rxnull behavior (but only for the connections
to butc; vldb and budb connections are not affected).
Change-Id: Ibf8ebe5521bee8d0f7162527e26bc5541d07910d
The butc -localauth option is available to use the cell-wide key to
authenticate to the vlserver and buserver, which in normal deployments
will require incoming connections to be authenticated as a superuser.
In such cases, the cell-wide key is also available for use in
authenticating incoming connections to the butc, which would otherwise
have been completely unauthenticated.
Because of the security hazards of allowing unauthenticaed inbound
RPCs, especially ones that manipulate backup information and are allowed
to initiate outboud RPCs authenticated as the superuser, default to
not allowing unauthenticated inbound RPCs at all. Provide an opt-out
command-line argument for deployments that require this functionality
and have configured their network environment (firewall/etc.) appropriately.
Change-Id: Ia6349757a4c6d59d1853df1a844e210d32c14feb
Make the actual implementations into helper functions, with the RPC
stubs calling the helpers and doing the auditing on the results, akin
to most other server programs in the tree. This relies on support for
some additional types having been added to the audit framework.
Change-Id: Ic872d6dfc7854fa28bd3dc2277e92c7919d0d0c0
Make a few misc changes to the text for the new -volume-ttl option:
- Minor grammatical/typo fixes
- Emphasize a little more that the default behavior allows for vldb
info to be cached _forever_
- Provide some info on the effects of changing this value
- Provide a suggested "typical" value, to give some clue as to what
should be set here, so a curious user doesn't just set this to the
first value they see (10 minutes)
Change-Id: Ib6b2871b111c392260ea80e26273201b09d4c402
Reviewed-on: https://gerrit.openafs.org/12909
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Tested-by: Andrew Deason <adeason@sinenomine.net>
Commit dfceff1d3a66e76246537738720f411330808d64 added the
-preserve-vol-stats flag to the volume server. This enabled a change in
the volume server to preserve volume usage statistics during reclone and
restore operations. Otherwise, volume usage counters of read-only
volumes are cleared when volumes are released, making it difficult to
track usage with the volume stats.
Make this feature the default behavior of the volume server and provide
the option -clear-vol-stats to use the old behavior if so desired. This
change makes the -preserve-vol-stats the default, and keeps it as a
hidden flag for sites which may already have that flag set in the
BosConfig.
Since this changes a default behavior of the volume server, this change
is only appropriate on a major or minor release boundary, not in the
middle of a stable series.
Change-Id: I3706ede64b7b18a80b39ebd55f2e1824bb7dbc57
Reviewed-on: https://gerrit.openafs.org/12674
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
What's displayed by fs wscell is not necessarily the current content
of ThisCell, but that at the time of starting the client. Say so.
FIXES 133339
Change-Id: Id3351f1236e5061340eb07041d4ce3e4de69a1a1
Reviewed-on: https://gerrit.openafs.org/12537
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
The unix cache manager caches VLDB information for read-only volumes as
long as a volume callback is held for a read-only volume. The volume
callback may be held as long as files in the read-only volume are being
accessed. The cache manager caches VLDB information for read/write
volumes as long as volume level errors (such as VMOVED) are not returned
by a fileserver while accessing files within the volume.
Add a new option to set the maximum amount of time VLDB information will
be cached, even if a callback is still held for a read-only volume, or
no volume errors have been encounted while accessing files in read/write
volumes.
This avoids situations where the vldb information is cached indefinitely
for read-only and read/write volumes. Instead, the VL servers will be
periodically probed for volume information.
Change-Id: I5f2a57cdaf5cbe7b1bc0440ed6408226cc988fed
Reviewed-on: https://gerrit.openafs.org/11898
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Michael Meffie <mmeffie@sinenomine.net>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Clone the VLLog man page to create a man page for ptserver log as well.
Fix the spelling of the PtLog file and add a link to the new PtLog man
page in the ptserver man page.
Add the missing PtLog log file name to the bos getlog man page.
Change-Id: I95ad4a2cf380077780160ec78fd1f9bdec132ba7
Reviewed-on: https://gerrit.openafs.org/12294
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Fixes this error:
$ git clean -xdf
$ ./regen.sh -q
$ ./configure
$ make
[…]
make[3]: Entering directory '/…/openafs/doc/man-pages'
rm -f man*/*.noinstall
if [ "no" = "no" ] ; then \
for M in man1/klog.1 man1/knfs.1 […] man8/kpwvalid.8 man1/klog.krb.1; do \
touch $M.noinstall; \
done; \
fi
touch: cannot touch 'man1/klog.1.noinstall': No such file or directory
touch: cannot touch 'man1/knfs.1.noinstall': No such file or directory
[…]
touch: cannot touch 'man8/kpwvalid.8.noinstall': No such file or directory
touch: cannot touch 'man1/klog.krb.1.noinstall': No such file or directory
Makefile:34: recipe for target 'prep-noinstall' failed
make[3]: *** [prep-noinstall] Error 1
make[3]: Leaving directory '/…/openafs/doc/man-pages'
Change-Id: I95098fb2b27f1d87fc9769497b225e9f91f72266
Reviewed-on: https://gerrit.openafs.org/12492
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Michael Meffie <mmeffie@sinenomine.net>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Mention the vlserver -d option can be used to set the initial logging
level.
Thanks to Mark Vitale for the suggestion.
Change-Id: Ia17a2063432343c2cf78e1b01c5897751625aae8
Reviewed-on: https://gerrit.openafs.org/12324
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Commit f085951d39c0d6c1e6a626177c30235704317600 introduced an error in
the bos getlog helpfile.
Modify the helpfile to describe the actual restrictions imposed by
-restricted mode.
Change-Id: I8d8fedb558a1bdbd55d80046b2011f3aacc71b3f
Reviewed-on: https://gerrit.openafs.org/12454
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Tested-by: Benjamin Kaduk <kaduk@mit.edu>
This commit adds the afsd -inumcalc command line switch to specify the
inode number calculation method in a platform neutral way.
Inode numbers reported for files within the AFS filesystem are generated
by the cache manager using a calculation which derives a number from a
FID. Long ago, a new type of calculation was added which generates inode
numbers using a MD5 message digest of the FID. The MD5 inode number
calculation variant is computationally more expensive but greatly
reduces the chances for inode number collisions.
The MD5 calculation can be enabled on the Linux cache manager using the
Linux sysctl interface. Other than the sysctl method of selecting the
inode calculation type, the MD5 inode number calculation method is not
specific to Linux.
This change introduces a command-line option which accepts a value to
indicate the calculation method, instead of a simple flag to enable MD5
inode numbers. This should allow for new inode calculation methods
in the future without the need for additional afsd command-line flags.
Two values are currently accepted for -inumcalc. The value of 'compat'
specifies the legacy inode number calculation. The value 'md5' indicates
that the new MD5 calculation is to be used.
Change-Id: I0257c68ca1a32a7a4c55ca8174a4926ff78ddea4
Reviewed-on: https://gerrit.openafs.org/11855
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Don't mention it in the man pages.
Change-Id: I8a6d706f055545642116af5a98fa8c04f533b990
Reviewed-on: https://gerrit.openafs.org/11529
Reviewed-by: Marcio Brito Barbosa <mbarbosa@sinenomine.net>
Reviewed-by: Mark Vitale <mvitale@sinenomine.net>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
The ability to set the size of the volume hash table was added
at the same time that DAFS was introduced, and got caught up
in the same preprocessor conditional. However, -vhashsize can
be useful for the traditional fileserver as well (even though
we recommend DAFS over the traditional fileserver), so let it
be used in that case.
Update the man pages accordingly and fix some grammar while here.
Noted by Mark Vitale.
Change-Id: Ic3282c9d661d60cf36f9ffb197e723a3f71da167
Reviewed-on: https://gerrit.openafs.org/12287
Reviewed-by: Mark Vitale <mvitale@sinenomine.net>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Add a -s2scrypt option to the volume server, with possible options:
* never -- the existing behavior
* always -- switch to using afsconf_ClientAuthSecure, which uses
rxkad_crypt, for ForwardVolume calls.
* inherit -- encrypt inter-server traffic if the causal client
connection is encrypted. This has the effect of "inheriting" the
"-encrypt" flag given to "vos release", for example.
Thanks to Jeffrey Altman for pointers and to Andrew Deason for noting
the existence of rxkad_GetServerInfo.
[mmeffie@sinenomine.net fix assertion and style update.]
Change-Id: Ia295ba3f29a8494c8250a480fb26594468d2116a
Reviewed-on: https://gerrit.openafs.org/11349
Reviewed-by: Mark Vitale <mvitale@sinenomine.net>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Thomas Keiser <tkeiser@gmail.com>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Add the ability to specify a range of addresses in both NetInfo and
NetRestrict.
Change-Id: Iecdcca8587aa2e6e7cd56cbbebb63eb41b5d6f40
Reviewed-on: https://gerrit.openafs.org/11313
Reviewed-by: Daria Phoebe Brashear <shadow@your-file-system.com>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
A simple utility to help with the 1.6-->1.8 upgrade by
bulk-converting keys, with some sanity checking.
Change-Id: Ibae9a1ea3b7c3bbad5ffbc02410fa7a4ff6c4d7f
Reviewed-on: https://gerrit.openafs.org/11786
Reviewed-by: Michael Meffie <mmeffie@sinenomine.net>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Do not create new server log files when servers are restarted by
default. External log rotation tools may be used to rotate the logs by
renaming log files and then signaling server processes to reopen
log files.
Add the -transarc-logs option to each server to provide backward
compatibility with the traditional Transarc-style logging. When
-transarc-logs is given, log files are renamed to an ".old" file
(overwriting the existing ".old" file) and the previous the log file is
truncated.
Change-Id: I2eeb67e3db32b2f75fe685b68dab1159e62061e9
Reviewed-on: https://gerrit.openafs.org/11731
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
The options -logfile and -config should be enclosed
by angle brackets.
Change-Id: I9e5767b7e43753b37dbc8d86c5346c778f8bab8d
Reviewed-on: https://gerrit.openafs.org/12233
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Update the man page to reflect the current access rights required for fs
examine. Historically, fs examine required read access on the root
vnode of the volume housing the directory or file being examined. This
access check was relaxed in commit d2d591caf2c9b4cf2ebae708cc9b4c8b78ca5a5a,
since the information returned by the file server is already available
anonymously by other means.
Change-Id: If62b625bce8a260b98fb56a6feec49c674f2de53
Reviewed-on: https://gerrit.openafs.org/12223
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Tested-by: Benjamin Kaduk <kaduk@mit.edu>
Update the afsd man page -settime and -nosettime options, which are obsolete
and no longer have any effect. Use the same wording as the other obsolete
options in the afsd man page. Keep the recommendations to use the time keeping
daemons provided by the operating system to maintain the system time.
Change-Id: I08a1bd5ae0b2d6618b3e212ebcbb98f470e33820
Reviewed-on: http://gerrit.openafs.org/12175
Reviewed-by: Michael Laß <lass@mail.uni-paderborn.de>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Stephan Wiesand <stephan.wiesand@desy.de>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Remove the salvagerserver option to print log messages to stdout. This
was a carry over from the stand-alone salvager and is not appropriate for
a daemon.
Change-Id: I55b99112278cdabb3e9911948dbda6a628030951
Reviewed-on: http://gerrit.openafs.org/11815
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
These options were copied from the salvager man page and are not implemented by
the salvageserver.
Change-Id: Ib6c5b3fd494f1662b958442863e5fbfc0755a0c2
Reviewed-on: http://gerrit.openafs.org/11817
Reviewed-by: Perry Ruiter <pruiter@sinenomine.net>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Add the missing -syslog and -syslogfacility options to
the salvageserver man page.
Change-Id: I1cb057a8085c4aeda32bb003cc4cec5035d00407
Reviewed-on: http://gerrit.openafs.org/11816
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Document the built-in version sub-command which displays
the OpenAFS version string. This sub-command is provided
by the cmd library.
Document the switch style -version option provided by the cmd
library for the initcmd based commands: afsmonitor, scout,
xstat_fs_test, and xstat_cm_test.
Change-Id: Id421d2c68a5c49a2b1a5abb2f3e9ca64ea36cd3e
Reviewed-on: http://gerrit.openafs.org/11161
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Supergroup information is explicitly present in -members
Change-Id: I25527c093858bc0b029417cbf2bb07717c50bb32
Reviewed-on: http://gerrit.openafs.org/11681
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Add a manual page for the KeyFileExt file.
Add cross-references from all places which currently reference
KeyFile(5), and update their body text accordingly.
Change-Id: Iab56847fcb59dda0c8a344a626ddb0ff35b98b26
Reviewed-on: http://gerrit.openafs.org/11770
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Prefer KeyFileExt to KeyFile ~everywhere. Make the main documentation
assume a modern cell with KeyFileExt and rxkad-k5, moving the old
rxkad and KeyFile documentation to a new section,
HISTORICAL COMPATIBILITY.
Note that kaserver is deprecated.
Do not mention the Update Server, which is also disrecommended for
new installations.
Add a copyright statement for the new content.
Change-Id: Idcb4940615a00189b655538a9a190cc35153cc89
Reviewed-on: http://gerrit.openafs.org/11769
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Add a client side check to vos changeaddr -oldaddr -newaddr
to refuse to change multihomed server entries, unless -force
is given.
Change-Id: I1428e94f0c2fc19bb6ba3b2c53468f4587283bbc
Reviewed-on: http://gerrit.openafs.org/11638
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
roll back -stayonline support for volume releases for now.
Change-Id: I5b4de15892f975514ea699994cb7c1da17ac83c2
Reviewed-on: http://gerrit.openafs.org/11787
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
Introduce the vos remaddrs sub-command for removing multi-homed server
entries from the vldb. The remaddrs sub-command completes the listaddrs
and setaddrs command suite and allows vos changeaddr to be deprecated
completely.
Change-Id: I98e92e776a153591a617a5b04037c3b6139d4732
Reviewed-on: http://gerrit.openafs.org/11606
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Chas Williams <3chas3@gmail.com>
Reviewed-by: Daria Brashear <shadow@your-file-system.com>
Reviewed-by: Jeffrey Altman <jaltman@your-file-system.com>
While reviewing gerrit 11678 I noticed the -n flag was
duplicated. Remove the duplicate flag.
Change-Id: I4a63a50199e1564a0b0394445e9dc1569bb08a0c
Reviewed-on: http://gerrit.openafs.org/11688
Tested-by: BuildBot <buildbot@rampaginggeek.com>
Reviewed-by: Stephan Wiesand <stephan.wiesand@desy.de>
Reviewed-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Remove sunrpc compatibility from rxgen. It's not tested, and
rpcgen is available from other sources. This will allow changes to be
made to rxgen without worrying about their impact on rpcgen compatibility.
Removals consist of the -l, -m, and -s switches, the source files
rpc_clntout.c and rpc_svcout.c, and the scan tokens 'program' and
'version'. The -R switch ('R compatibility') is also removed, as it's
a noop.
Change-Id: I960fac14faf072d221b8cb166e9388ab4accfa26
Reviewed-on: http://gerrit.openafs.org/10258
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
We have previously documented that volumes over 2TB can result in
inaccuracies, but this documentation does not say how the 'partition'
field in "fs listquota" can be inaccurate. It is confusing to see a
usage of 0% for a partition that you know is being used, so try to
briefly explain in what way this field is inaccurate.
The reason we _under_-report the partition usage is that the
fileserver actually gives back PartBlocksAvail and PartMaxBlocks (not
"blocks used" and "blocks total"). So 1TB used and 4TB total is
truncated to 2TB and given back as 2TB free and 2TB total. One we hit
3TB used we'll report it as 1TB free 2TB total (50%) when the actual
usage is 75%.
Change-Id: I0b3de04ef2bd6cd32fdcb1a82cbac58d5d621e5b
Reviewed-on: http://gerrit.openafs.org/11245
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
Tested-by: BuildBot <buildbot@rampaginggeek.com>
