Add a "check" rule to each of the docbook directories
that uses xmllint.exe (from Cygwin) to validate the
docbook source against the DTD. Validation failures
will halt the build.
Change-Id: Ifcfcab11d5077381bfe7fa5e3767070a8d55cb21
Reviewed-on: http://gerrit.openafs.org/2391
Reviewed-by: Russ Allbery <rra@stanford.edu>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Reviewed-by: Jeffrey Altman <jaltman@openafs.org>
Tested-by: Jeffrey Altman <jaltman@openafs.org>
Correct the fs manpage to show that 'fs diskfree' shows a header
called 'total' to represent the total disk space, not 'kbytes'.
Change-Id: Id827ec81dcfd79ab28eed3bc392524a378f0069d
Reviewed-on: http://gerrit.openafs.org/2313
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
When a volume is locked in the VLDB, we are given flags for the reason
why the lock was set. Make vos interpret and output this reason.
This adds output to any vos command that previously printed that a
volume was LOCKED. It now outputs, for example,
Volume is currently LOCKED
Volume is locked for a delete/misc operation
Change-Id: Ie3a6f804a3e3a551840975c3689b24d3916891df
Reviewed-on: http://gerrit.openafs.org/2235
Tested-by: Andrew Deason <adeason@sinenomine.net>
Reviewed-by: Jason Edgecombe <jason@rampaginggeek.com>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
The afsd man page says that -fakestat only fakes stat information for
cross-cell mount points. Technically it fakes stat information for all
cellular mount points, local or foreign. Most people shouldn't care,
but note the difference, since some places do have local cellular
mount points.
Change-Id: I9bc61a0284b7d04439578a4fc5a6adf791217463
Reviewed-on: http://gerrit.openafs.org/1979
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Reviewed-by: Russ Allbery <rra@stanford.edu>
Tested-by: Russ Allbery <rra@stanford.edu>
This is another patch in the series to provide manpages for
dafs-related commands.
Most (if not all) documentation is coming from source
documentation and DAFS articles/presentations.
The primary motivation behind this is to comply with Debian
guidelines requiring all binaries to have respective manpages.
This patch has been sitting here for months, so it's good time
to finally submit it.
Note that fssync-debug also supports some vcg* commands, for
which I was not able to find any documentation I could use.
So, they are still left to be documented.
Change-Id: I9d067766e2a90b26646edc87f15a4f533c5c8d44
Reviewed-on: http://gerrit.openafs.org/2220
Reviewed-by: Russ Allbery <rra@stanford.edu>
Tested-by: Russ Allbery <rra@stanford.edu>
change the quick start guide so people stop asking why they can't
set the ACL on /afs.
Change-Id: Iffc6c95564e99c01cef1b2b54d6b35e9bd01f38c
Reviewed-on: http://gerrit.openafs.org/1872
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
if an admin specifies -dynroot-sparse (instead of dynroot) come up
with just local cell and cell aliases showing. cell list
is configured as normal. fs newcell works as normal.
document it.
Change-Id: Ie644ed0f9923a85da5451eafaa114ddf36daa671
Reviewed-on: http://gerrit.openafs.org/2217
Reviewed-by: Andrew Deason <adeason@sinenomine.net>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
Previously, building with Kerberos support required either passing a
flag to configure giving the location of a krb5-config script, or
manually setting variables specifying the Kerberos libraries and
header path. Replace that code with code that checks for Kerberos
libraries automatically and builds the Kerberos code if any were
found, with support for doing direct library probing if there is no
krb5-config script.
Add several platform-specific overrides directly into the configure
support, so we should be able to build out of the box on Mac OS X 10.3,
HP-UX, and AIX Kerberos with the new probes.
The Kerberos Autoconf macros are now the versions that come with
rra-c-util and are tested with multiple other packages, so both
OpenAFS and those packages will be able to benefit from further
portability improvements.
Update README for the new building instructions, documenting how to
configure the Kerberos probes if they can't automatically figure out
the location and flags for Kerberos on your system.
Change-Id: Ia35bb0dbc6b94c6b4dfe8165388447dbfcb31a29
Reviewed-on: http://gerrit.openafs.org/2026
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
Document the -host and -uuid flags to vos listaddrs. They were mentioned
in the SYNOPSIS, but not in the OPTIONS section of the manual page.
Change-Id: I96e6b67b7239d9455060fd0c76b8d44f41a010a2
Reviewed-on: http://gerrit.openafs.org/2083
Reviewed-by: Russ Allbery <rra@stanford.edu>
Tested-by: Russ Allbery <rra@stanford.edu>
Update and revise chapter two (Issues in Cell Configuration and
Administration) of the Administration Guide for current AFS and current
computing concepts.
Remove references to an AFS-provided login utility and discuss local login
configuration for Kerberos more generically. Further clarify the role of
ssh in ensuring the user has access to files in AFS during remote login.
Improve the inode and namei discussion slightly. Update the setuid
discussion for the new default of disabling setuid for cells and for the
known security flaws in enabling setuid. Modernize terminology for DNS
around cell naming and remove the descriptions of TLDs. We can now assume
our target audience knows this stuff.
Move index terms into the appropriate section for what's being indexed in
a few more cases.
Lots of other, more minor wording changes and updates.
Change-Id: Id8b1ace5afca6b8b7b2082a9a0779a4b91c89dcd
Reviewed-on: http://gerrit.openafs.org/2065
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Reviewed-by: Jeffrey Altman <jaltman@openafs.org>
Tested-by: Jeffrey Altman <jaltman@openafs.org>
Document that salvager creates separate logs per partition when doing
a full server salvage and then appends them all to SalvageLog when it
completes.
Change-Id: I2ffa8c79ef83b590f90bb014fc318559deae7113
Reviewed-on: http://gerrit.openafs.org/2035
Reviewed-by: Russ Allbery <rra@stanford.edu>
Tested-by: Russ Allbery <rra@stanford.edu>
For each command only useful with the Authentication Server, add
warnings that the Authentication Server is obsolete and will be
removed in a future version of OpenAFS. Encourage people who care
to update uss to work with a modern Kerberos KDC, recommend kinit
and aklog or klog.krb5 over klog, and warn that klog will be of
limited use without an Authentication Server.
Change-Id: Idc78ba548134b83ac1eea0fb81a5bc38a431bb38
Reviewed-on: http://gerrit.openafs.org/2052
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
Purely reformatting to make the document more maintainable. There are
no content changes.
Change-Id: I349c8e86de925cbed6e09be529a22e0a08b227f6
Reviewed-on: http://gerrit.openafs.org/2059
Reviewed-by: Russ Allbery <rra@stanford.edu>
Tested-by: Russ Allbery <rra@stanford.edu>
Update and revise chapter one (An Overview of OpenAFS Administration)
of the Administration Guide for current AFS and current computing
concepts.
Replace the Kerberos Server terminology with Kerberos KDC and add
additional details about the relationship between AFS and a Kerberos
KDC. Remove some remaining Authentication Server references. Add
some details about the Protection Server management of the mapping
from Kerberos principals to AFS IDs.
Remove some now-obsolete distinctions and concepts between mainframes
and workstations and recommendations for server systems.
Reorganize the order in which the servers are discussed to follow a
somewhat more natural order.
Be clear that the Backup Server is optional and that there are other
methods available to back up AFS. Mention backing up to disk as well
as tape in a few places.
Change-Id: I57ce083a84ca2a44f7a4383d80b05508e6448284
Reviewed-on: http://gerrit.openafs.org/2045
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
Purely reformatting to make the document more maintainable. There are
no content changes.
Change-Id: Ic3fb32ef68c14418b3ac6bab92fda759db89b394
Reviewed-on: http://gerrit.openafs.org/2044
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
Provide a more useful abstract and remove the (outdated) specific list
of supported platforms and the M.m version number placeholders. Update
the list of associated documents to match their current titles, and
provide a better description of the Reference Manual.
Reformat the parent document and preface for easier maintenance in the
future.
Change-Id: I42ce78274ed7c4ca7a2f0b9c5ec2e6f7a786adb8
Reviewed-on: http://gerrit.openafs.org/2043
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Reviewed-by: Russ Allbery <rra@stanford.edu>
Tested-by: Russ Allbery <rra@stanford.edu>
Change references to the documentation sets that we still ship to
reference the OpenAFS manuals instead of the IBM AFS manuals. Remove
references to the IBM AFS/DFS Migration documentation, since that
doesn't appear to be available anywhere any more, replacing them where
relevant to more generic references to the DFS documentation. Add
links to docs.openafs.org for mentions of the manuals in SEE ALSO, and
standardize on one link format. Replace a few references to the IBM
AFS Release Notes with the actual information in those notes, or drop
the reference if it doesn't seem particularly useful.
Change-Id: Ie9666842f1315891c6a9c37c0424200f4b78bff7
Reviewed-on: http://gerrit.openafs.org/2031
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
salvager and salvageserver's documentation of -oktozap says to not use
without consultation with AFS Development or Product Support, left over
from the IBM product. Remove those references and add a caution more
in line with open source.
Change-Id: I136dc145caf3e8e3a992c239e1a46d86f96580ed
Reviewed-on: http://gerrit.openafs.org/2030
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
Reviewed-by: Jeffrey Altman <jaltman@openafs.org>
The -rebuildDB flag was documented to rebuild the Protection Database at
startup, but it was accepted and ignored in the ptserver source, doing
nothing. Remove the documentation and the option recognition in ptserver.
Change-Id: I36f30f38464b602cb4739a958663a6feb5fe27bf
Reviewed-on: http://gerrit.openafs.org/2029
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
-fastKeys wasn't accepted by the kaserver binary, but was still
mentioned in the usage message and the kaserver man page. Remove
the remnants of the flag.
Change-Id: Ifb3ae49ea0cab80c325a77b0eb1062944697b53d
Reviewed-on: http://gerrit.openafs.org/2028
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
Adds new command line option to scout so users can set the
number of characters to display without truncating.
Change-Id: I69f159549d7f5b4cfee26c276ad34705f504ee2b
Reviewed-on: http://gerrit.openafs.org/1951
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Reviewed-by: Russ Allbery <rra@stanford.edu>
Tested-by: Russ Allbery <rra@stanford.edu>
We have two LICENSE files, which had been somewhat independently
modified. Resynchronize them, remove trailing whitespace, and convert
from ISO 8859-1 to UTF-8.
Change-Id: Ia3dba0e328e7f026362e2e8efda206c34ce4e768
Reviewed-on: http://gerrit.openafs.org/2025
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
Mention in the fs getserverprefs and fs setserverprefs documentation
that VL servers may also come from DNS AFSDB and SRV records. Document
that SRV record information is not (yet) properly used.
Change-Id: I223efedf4d00ac1b57b3dce74a807790691abdbf
Reviewed-on: http://gerrit.openafs.org/2015
Tested-by: Russ Allbery <rra@stanford.edu>
Tested-by: Derrick Brashear <shadow@dementia.org>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Clearly prefer asetkey to bos addkey in the KeyFile, bos addkey, and
bos listkeys man pages. Reference asetkey list and asetkey delete as
alternatives to bos listkeys and bos removekey. Distinguish between
Authentication Server cells and Kerberos v5 cells and mention the
preferred afs/<cell> principal format. Add some cautions around
matching enctypes and salts when synchronizing keys with a v5 KDC.
Update man-pages/README for completion of this task, clean up some
other wording, and remove some other now-irrelevant information.
Change-Id: I29b83a61cbdb08de508bdb313524a307e385044b
Reviewed-on: http://gerrit.openafs.org/1938
Reviewed-by: Jeffrey Altman <jaltman@openafs.org>
Reviewed-by: Andrew Deason <adeason@sinenomine.net>
Tested-by: Russ Allbery <rra@stanford.edu>
Reviewed-by: Russ Allbery <rra@stanford.edu>
Examples of the pts mem -expandgroups and -supergroups
options for the man page.
Change-Id: Idea0509797212397eff87aa5975eaf5364c8414c
Reviewed-on: http://gerrit.openafs.org/1896
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
Add a copy of RFC 5864 (DNS SRV Resource Records for AFS) to the
protocol documentation directory for reference. As permitted by
the IETF Trust License Policy section 3(e), I release this document
under the MIT/X Consortium license included in this copy of the
document.
LICENSE MIT
Change-Id: I8e22aac07b4cedbe18b8375213a7866cf98a1386
Reviewed-on: http://gerrit.openafs.org/1799
Tested-by: Derrick Brashear <shadow@dementia.org>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
If --enable-fuse-client is passed to configure and afsd.fuse is built,
install it into the same directory as afsd and install afsd.fuse.8 as a
symlink to the afsd.8 man page. Add documentation of afsd.fuse to the
afsd man page.
Change-Id: I7d0cd3992a8466e626af2191c713e5623cc40d84
Reviewed-on: http://gerrit.openafs.org/1792
Tested-by: Russ Allbery <rra@stanford.edu>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
Change I572ff682de4cc7ef27bb46dd028d3d797b873841 added the fileserver
callback xstats collection to afsmonitor. Provide some documentation
for these fields, along with the other fields displayed by afsmonitor.
Change-Id: I21618047519fbb28f6707ff9ba95a17fe27e0f3c
Reviewed-on: http://gerrit.openafs.org/1783
Tested-by: Andrew Deason <adeason@sinenomine.net>
Reviewed-by: Russ Allbery <rra@stanford.edu>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Add a caution explaining how the file server addresses are registered
and pointing users at NetInfo and NetRestrict plus restarting the file
server for the normal case.
Mention what version of OpenAFS introduced this command. Drop the note
about the version of OpenAFS that added the -encrypt flag, since the
whole command is newer than that.
Reference vos listaddrs -printuuid specifically to get the UUID.
General formatting and wording cleanup: use terminology more consistently,
continue a long example line, wrap long lines, fix a spelling error, and
add cross-references to NetInfo and NetRestrict.
Change-Id: Idd6175339dc0feb1b777963bbb09731e42b83522
Reviewed-on: http://gerrit.openafs.org/1787
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
Important changes affecting the Windows distribution for 1.5.74
Change-Id: I980a66a2ab4a90c580249641fc22e3c7a91097dc
Reviewed-on: http://gerrit.openafs.org/1770
Reviewed-by: Jeffrey Altman <jaltman@openafs.org>
Tested-by: Jeffrey Altman <jaltman@openafs.org>
The vos setaddrs command sets the IP addresses for a server entry
in the Volume Location Database (VLDB). Specify one or serveral hosts.
All existing hosts in the VLDB entry are replaced with the new entries
on the command line.
Change-Id: I3c26e49c4a6e2aebae363017d074329ac265132a
Reviewed-on: http://gerrit.openafs.org/1744
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
Improve support for supergroups in the pts membership command
with a new option called -expandgroups. This option will
recursively show the complete membership of users and groups.
The expanded members of a group are all the users which are
members of all of the group's sub-groups. The expanded groups
of a user are all the groups which are supergroups of the
users's groups.
Change-Id: I811a4e5e73632e5e205fe10f3f3a36a98464d49e
Reviewed-on: http://gerrit.openafs.org/1601
Reviewed-by: Andrew Deason <adeason@sinenomine.net>
Tested-by: Andrew Deason <adeason@sinenomine.net>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
Improve pts support for supergroups with an option to list the
supergroups of a group.
Change-Id: I4fe1cd131cd334386bc16ce733e01e29e0511d4f
Reviewed-on: http://gerrit.openafs.org/1600
Reviewed-by: Andrew Deason <adeason@sinenomine.net>
Tested-by: Andrew Deason <adeason@sinenomine.net>
Reviewed-by: Simon Wilkinson <sxw@inf.ed.ac.uk>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
It's possible to use AFSDB records only to locate the VLDB servers but
still list the cell in the client CellServDB so that the client is
aware of it and populates it into dynroot. Describe doing this in the
man page.
Change-Id: I714cd515dc4b72a6e358bbd8f9332d4ddce5a5fc
Reviewed-on: http://gerrit.openafs.org/1710
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
Add a caution to the fileserver man page explaining that traditional
and demand-attach require different configurations, and also mention
that there are two different server implementations. Add an example
of a bos create command for creating a demand-attach File Server to
the fileserver man page.
Add a caution to the bos create man page that a traditional fs node
won't work with demand-attach and vice versa. Document the necessary
arguments for the dafs type. Clarify in EXAMPLES which bos create
commands are traditional and which are demand-attach. Add an example
of changing from a traditional to a demand-attach configuration.
Change kaserver to ptserver in the example of a simple process.
Change-Id: I4077246b69edf6e1ddc7c0761ac8e1006d471c24
Reviewed-on: http://gerrit.openafs.org/1707
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
Make the computation of the docbook stylesheet location
based upon testing for directory existence now that versions
of cygwin 1.7.2 and place the stylesheets in a new location.
Change-Id: I844ae35a34eab73ee033bba875e68f71dc54f26b
Reviewed-on: http://gerrit.openafs.org/1702
Reviewed-by: Jeffrey Altman <jaltman@openafs.org>
Tested-by: Jeffrey Altman <jaltman@openafs.org>
This patchset contains updates to the OpenAFS UserGuide that
explains how to authentication OpenAFS using kinit/aklog
and uses language describing Kerberos outside the context
of the kaserver. References to applications such as telnet
have been replaced with more modern equivalents such as ssh.
Change-Id: Ifae779b04a26beb9be9cf58b450958acdc477c06
Reviewed-on: http://gerrit.openafs.org/1521
Tested-by: Jeffrey Altman <jaltman@openafs.org>
Reviewed-by: Jeffrey Altman <jaltman@openafs.org>
these are the release notes available via the web but not here.
Change-Id: Ieb4af99a4d6a1dfdaabccdac79d03f7d328de675
Reviewed-on: http://gerrit.openafs.org/1641
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
The option was given correctly in SYNOPSIS but not in the OPTIONS section.
Thanks, Rod Widdowson.
FIXES 126771
Change-Id: Ibd9694c066b6750ad04273c22e66c84fb7b4a1c6
Reviewed-on: http://gerrit.openafs.org/1589
Reviewed-by: Rod Widdowson <rdw@steadingsoftware.com>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
replace both
afssettings with something patterned from webdav's (BSD-licensed)
mount program with general plist reading code. the lists of
valid oid objects of course have to be the same. eject old
darwins. add the new one.
fstab with something from freebsd umount
Change-Id: I28f6765475314b9b78102c762daec19cda4988c3
Reviewed-on: http://gerrit.openafs.org/1583
Reviewed-by: Russ Allbery <rra@stanford.edu>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
In DAFS, replace uses of the VLockPartition_r partition-level locks with
the approprivate VLockVolume*NB volume-level locks (and sometimes
FSYNC_VerifyCheckout). This allows for greater parallelization of
volserver attachment / volume creation, for volume operations to occur
during salvages, and for multiple salvages on a single partition to
occur simultaneously.
More architectural details of volume-level locks can be found in the
changes to doc/arch/dafs-overview.txt.
Change-Id: I4e8ef4c864002d7e7c976691824c53dfa9cfaf91
Reviewed-on: http://gerrit.openafs.org/1406
Tested-by: Andrew Deason <adeason@sinenomine.net>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
Add some developer documentation for DAFS. This isn't comprehensive or
extremely detailed, but is intended to provide a larger-picture overview
of some of the pieces of DAFS. More detailed docs are intended to exist
in source comments (doxygen and such), and should already be there for
the most part.
Change-Id: I167b52c3bfb9e6b4b7111b3548ca8b1dafe305ea
Reviewed-on: http://gerrit.openafs.org/1376
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
When salvaging a volume (with DAFS or not), it is required to read the
volume headers of all volumes on the partition, so we know what volumes
are in the same volume group as the salvaged volume. Currently with
DAFS, this requirement can make demand-salvages very slow, since each
demand-salvage must read each volume header on the partition.
So, instead of having each demand-salvage read the volume headers
itself, have a demand-salvage request the required volume group
hierarchy information from the fileserver. The fileserver will scan the
partition's volume headers, and will keep the hierarchy cached in
memory. Any modifications to this hierarchy from volume
creation/deletion will update this volume group cache (VGC) via FSSYNC
commands.
This results in a dramatic salvaging speedup when many demand-salvages
are requested, and eliminates the cases where DAFS salvaging can be
significantly slower than non-DAFS salvaging.
FIXES 124488
Change-Id: Ie9ae655593ad8a90ca6ad8f63e6b6e799f283988
Reviewed-on: http://gerrit.openafs.org/880
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
Added some text that the CellAlias file is only used on Unix.
LICENSE BSD
Change-Id: I913d6a0774240ffc16cf92cfa92c4b2d06f41fd6
Reviewed-on: http://gerrit.openafs.org/1307
Tested-by: Jason Edgecombe <jason@rampaginggeek.com>
Reviewed-by: Jeffrey Altman <jaltman@openafs.org>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
Provide some explanation for the various FSSYNC commands, and what they
are there for.
Change-Id: I572300b66cc8b6a1b0f2aa185edd198c237f7225
Reviewed-on: http://gerrit.openafs.org/1236
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
Write some documentation for the -files and -excessive options to
fs getcacheparms
Change-Id: I769f8c0cf6d9d100a1687ae73a337132befb2449
Reviewed-on: http://gerrit.openafs.org/1217
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
Change the default so new installations of the bosserver have
no weekly restarts. Update the manpage and XML documentation to
reflect this change.
FIXES 126138
Change-Id: Ic22b750a602f6d2a22be881f5e1b04cd4fa132ae
Reviewed-on: http://gerrit.openafs.org/1097
Reviewed-by: Russ Allbery <rra@stanford.edu>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
Remove the #ifdef's around the bos restricted mode code. This makes
restricted mode available as part of the standard build, but a server
will not go into restricted mode unless the relevant command line
options are specified, or bos setrestricted is run.
Document bos_setrestricted and bos_getrestricted, and the new
'-restricted' command line option. Add a note to the man pages of
all of the commands whose behaviour is affected by restricted mode.
Add 'setr' and 'getr' aliases for setrestart and getrestart so that
these documented shortcuts continue to work (otherwise they'd be
ambiguous against setrestricted and getrestricted). Note that
setre, setres, and setrest will not work once this patch is applied.
Change-Id: Ie69d21493ea5f78757f0a3d478de43fdaabd3c31
Reviewed-on: http://gerrit.openafs.org/1028
Reviewed-by: Michael Meffie <mmeffie@sinenomine.net>
Reviewed-by: Andrew Deason <adeason@sinenomine.net>
Tested-by: Andrew Deason <adeason@sinenomine.net>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
To set a key, use "asetkey add", not just "asetkey"
FIXES 125430
Change-Id: Ifa381ec95f9253bcc5c7a1d374fbf88408f82f67
Reviewed-on: http://gerrit.openafs.org/1045
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
vos dump -verbose sends its logging to stderr, not to stdout (where
it would potentially collide with the dump data itself).
FIXES 124911
Change-Id: I515c50df59d2f376787969df59b6e01e244ecbc7
Reviewed-on: http://gerrit.openafs.org/1044
Reviewed-by: Russ Allbery <rra@stanford.edu>
Tested-by: Russ Allbery <rra@stanford.edu>
Add a command to vos to explicitly end volume transactions. These can
happen if (for example) we segfault or the user ctrl-C's in 'vos'
before/after a volume operation, but before we AFSVolEndTrans.
Change-Id: Ie34ee1fdff917b56900f456c7cf8b1329533a7da
Reviewed-on: http://gerrit.openafs.org/870
Reviewed-by: Dan Hyde <drh@umich.edu>
Reviewed-by: Alistair Ferguson <alistair.ferguson@mac.com>
Tested-by: Alistair Ferguson <alistair.ferguson@mac.com>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
Fix the pt_util manpage to reflect the fact that it is run on database
servers, not fileservers.
Change-Id: If2a8e5b65ef925c50eb9bfebea4e0d30c20f0970
Reviewed-on: http://gerrit.openafs.org/901
Tested-by: Jeffrey Altman <jaltman@openafs.org>
Reviewed-by: Jeffrey Altman <jaltman@openafs.org>
Description of registry key HKLM\ SOFTWARE\ OpenAFS\
Client\ Server Preferences\ File (and \ VLDB) states
"256" - should be 15 - and "ServerPreferences" should
have a space between the words.
Change-Id: Ia2147f920ecc023d26250efaf9815f1b09d1550a
Reviewed-on: http://gerrit.openafs.org/840
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Jeffrey Altman <jaltman@openafs.org>
Reviewed-by: Jeffrey Altman <jaltman@openafs.org>
Make ihandle file descriptor cache parameters tunable, and accommodate
platforms where max open files is large. Expand the fd cache hash table
to 2048 entries. Raise fd cache size automatically to match configured
number of lwps.
NOTE: This code has been tested on Centos 5.3 x86_64, on VMWare, 2 physical,
2 logical CPUs (in tandem with viced_more_threads).
LICENSE BSD
Change-Id: If68eda6e1c955e026b250ca52bddf0b8383959c9
Change-Id: I5fbbec95523ea9cd9ff42dcf43f17db94c7bb161
Reviewed-on: http://gerrit.openafs.org/584
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
Cache parameters are discussed in two locations in the afsd man page,
and the first copy had not been updated for the new auto-tuning of
the chunk size and the stat parameter. Fix both.
Note that the firewall requirements for klog only apply if you're using
kaserver and klog. Kerberos v5 has its own requirements, but this is not
the place to talk about them.
Change-Id: I9cdaaa71351a64cecc1b6904efba87d4871d42fb
Reviewed-on: http://gerrit.openafs.org/798
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
9d396c4916 (from 2005) introduced
autotuning for afsd, and changed some of the defaults which aren't
autotuned. Update the afsd man page to reflect the autotuning, and
the new defaults.
Change-Id: Iea2035743cb45cca1c249bc2e838405039ad7d3a
Reviewed-on: http://gerrit.openafs.org/744
Tested-by: Derrick Brashear <shadow@dementia.org>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Add support for Windows 7 and Server 2008 R2.
Improve text in a variety of areas.
LICENSE MIT
Reviewed-on: http://gerrit.openafs.org/719
Tested-by: Jeffrey Altman <jaltman@openafs.org>
Reviewed-by: Jeffrey Altman <jaltman@openafs.org>
A typo in c717fcd32c removed the = before
the first head1 in vos_remsite.pod. Put it back.
Reviewed-on: http://gerrit.openafs.org/612
Tested-by: Derrick Brashear <shadow@dementia.org>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Larger collection of all vos suite commands, including but
not limited to:
-- documented all commands / options, verified against both 1.4 and 1.5 tree
(including the common -encrypt/-noresolve options)
-- correct order, POD formatting and synopsis for all commands' options
-- shorthand synopsis provided for all commands that missed it, with proper
non-ambiguous command abbreviations of all options
-- POD synopsis formatted to 80-columns in commands where it was running over
-- for newer options, documented which OpenAFS version they became available
-- proper manpage links using L<> in vos.pod
Reviewed-on: http://gerrit.openafs.org/609
Tested-by: Derrick Brashear <shadow@dementia.org>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
The POD formatting code for bold is B, not b.
Reviewed-on: http://gerrit.openafs.org/546
Tested-by: Derrick Brashear <shadow@dementia.org>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
An initial pass at adding indexing to the Windows release notes.
The next pass should refine the index terms and add appropriate
secondary index values.
LICENSE MIT
Reviewed-on: http://gerrit.openafs.org/454
Tested-by: Jeffrey Altman <jaltman@openafs.org>
Reviewed-by: Jeffrey Altman <jaltman@openafs.org>
Reformat the Registry and Environment Values in Appendix A
so that they are easier to identify in the table of contents.
LICENSE MIT
Reviewed-on: http://gerrit.openafs.org/453
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Reviewed-by: Jeffrey Altman <jaltman@openafs.org>
Tested-by: Jeffrey Altman <jaltman@openafs.org>
restorevol moved from section 8 to section 1. The Windows build
system needed corresponding changes.
Reviewed-on: http://gerrit.openafs.org/440
Tested-by: Jeffrey Altman <jaltman@openafs.org>
Reviewed-by: Jeffrey Altman <jaltman@openafs.org>
restorevol only requires access to a dump file and write access to the
directory in which the dump is being unpacked. It doesn't require being
a superuser, so it should be installed in bin instead of sbin. Also
move the man page to section 1 and update references accordingly.
Reviewed-on: http://gerrit.openafs.org/333
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
Added a bullet point explaining the use of a Kerberos cross-realm trust and PTS
foreign groups to give foreign users access.
Replaced a reference to Authentication Database with Kerberos Database.
LICENSE BSD
Reviewed-on: http://gerrit.openafs.org/381
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
Removed the reference to the Authentication Server and added a reference to the Kerberos Server and Kerberos 5 authentication for foreign clients.
Replaced AFS Product Support with the AFS registrar as the maintainer of the
public CellServDB file. A link was added to grand.central.org for getting the
latest copy of the file and submitting changes for the local site.
Reviewed-on: http://gerrit.openafs.org/379
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
Remove the conditional and Autoconf flag for enabling BosConfig.new
handling and change bosserver to always rename BosConfig.new to BosConfig
on startup if the former exists.
Document BosConfig.new handling in the bosserver and BosConfig man pages.
Tone down the warning about the BosConfig file format changing and warn
that bosserver rewrites BosConfig when shutting down.
Reviewed-on: http://gerrit.openafs.org/211
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
Added text about Freelance Mode and Dynamric Root Mode and the changes they
cause when dealing with mounts to foreign cells in /afs and \\AFS
Reviewed-on: http://gerrit.openafs.org/380
Reviewed-by: Jeffrey Altman <jaltman@openafs.org>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
Fixed a typo in the asetkey man page.
Reviewed-on: http://gerrit.openafs.org/373
Tested-by: Derrick Brashear <shadow@dementia.org>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
The file format is a single line containing one or more realms
separated by white space.
LICENSE BSD
Reviewed-on: http://gerrit.openafs.org/352
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Tested-by: Derrick Brashear <shadow@dementia.org>
Some formatting corrections
Section 3.26 updated to describe limitations caused by Apple
Bonjour on 32-bit Windows.
Section 3.40 updated to mentions Microsoft SMB Redirector
Extended Server Timeout support.
Section 3.41 updated to describe inability of pioctl operations
to succeed on service mapped drives.
Section 3.43 updated to include Windows 7 and Server 2008
in the known issues list.
New section 3.51 on Microsoft RPC Services
LICENSE MIT
Reviewed-on: http://gerrit.openafs.org/346
Tested-by: Jeffrey Altman <jaltman@openafs.org>
Reviewed-by: Jeffrey Altman <jaltman@openafs.org>
PTS groups with 's' access permissions can be examined by members of the
group and the owner of the group in addition to system:administrators.
State this in the manual page.
Reviewed-on: http://gerrit.openafs.org/327
Tested-by: Derrick Brashear <shadow@dementia.org>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
The original IBM HTML documentation had a table showing the permissions
that bosserver expects and sets when it creates the directory structure
for AFS. That table was accidentally dropped in the conversion to POD.
Restore it from the HTML shipped with an older version of OpenAFS.
Reviewed-on: http://gerrit.openafs.org/210
Tested-by: Russ Allbery <rra@stanford.edu>
Reviewed-by: Russ Allbery <rra@stanford.edu>
It was suggested that the auditlog option should not say there is one
record per RPC. In the future, there might be a need for multiple records
per RPC.
LICENSE BSD
Reviewed-on: http://gerrit.openafs.org/229
Tested-by: Derrick Brashear <shadow@dementia.org>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
The expanded auditlog explanation includes what information is recorded
in the auditlog.
LICENSE BSD
Reviewed-on: http://gerrit.openafs.org/213
Tested-by: Derrick Brashear <shadow@dementia.org>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Document that the quotas passed to fs setquota, vos create, and vos
setfields and the size passed to fs setcachesize may take a suffix
indicating the unit. This documents the change in behavior implemented by
54c0a3f3e6.
Fix a copy/paste error in the vos create -maxquota option definition.
Reviewed-on: http://gerrit.openafs.org/212
Tested-by: Derrick Brashear <shadow@dementia.org>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Adds support for sysv message queues for fileserver audit logs. This
also organizes the audit log code into various 'interfaces', of which
there are two: the original 'file' interface, and the 'sysvmq' interface
that this adds. The interface is configurable at runtime with the
-audit-interface switch.
FIXES 124674
Reviewed-on: http://gerrit.openafs.org/82
Tested-by: Andrew Deason <adeason@sinenomine.net>
Tested-by: Derrick Brashear <shadow@dementia.org>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
This adds the -id option to 'vos create', and the -roid option to 'vos
create' and 'vos addsite'. This allows the user to manually specify the
volume IDs that a new RW or RO volume will get (or explicitly specify
that an RO volume ID should be unset), instead of always relying on the
volume IDs retrieved from the vlserver.
Reviewed-on: http://gerrit.openafs.org/157
Tested-by: Derrick Brashear <shadow@dementia.org>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Gerrit 175 renamed compile_et and compile_et.pod to afs_compile_et*.
Fix the Windows build system to process the new pod file name
and modify the WiX installer scripts to install afs_compile_et.html.
FIXES 125152
LICENSE MIT
Reviewed-on: http://gerrit.openafs.org/http://gerrit.openafs.org/204
Tested-by: Jeffrey Altman <jaltman@openafs.org>
Reviewed-by: Jeffrey Altman <jaltman@openafs.org>
Rename the installed version of compile_et to afs_compile_et to avoid
conflicts with other, more standard, users of com_err. Also rename the
man page to match
Reviewed-on: http://gerrit.openafs.org/http://gerrit.openafs.org/175
Tested-by: Derrick Brashear <shadow@dementia.org>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Many Windows files were not included in the .gitignore files.
Many directories did not have .gitignore files at all.
Add and update where required.
LICENSE IPL10
Reviewed-on: http://gerrit.openafs.org/103
Verified-by: Simon Wilkinson <sxw@inf.ed.ac.uk>
Reviewed-by: Simon Wilkinson <sxw@inf.ed.ac.uk>
Verified-by: Jeffrey Altman <jaltman@openafs.org>
Reviewed-by: Jeffrey Altman <jaltman@openafs.org>
Replaced some references to the Authentication Database with Kerberos.
Removed text about obsolete tools like rcp, inetd, and rlogin.
Corrected references to AFS Product support by replacing them with links
to the OpenAFS Support page. Added warnings about using the wrong fsck binary
with inode and namei-based fileserver binaries. Removed an obsolete paragraph
about ThisCell and how it interacts with the Authentication Database.
LICENSE BSD
FIXES 124931
Reviewed-on: http://gerrit.openafs.org/10
Verified-by: Derrick Brashear <shadow@dementia.org>
Reviewed-by: Derrick Brashear <shadow@dementia.org>
Verified-by: Russ Allbery <rra@stanford.edu>
Reviewed-by: Russ Allbery <rra@stanford.edu>
The -valid switch to vos addsite doesn't take an argument, and it is
optional. Correcting documentation to reflect that.
Reviewed-on: http://gerrit.openafs.org/11
Verified-by: Russ Allbery <rra@stanford.edu>
Reviewed-by: Russ Allbery <rra@stanford.edu>
Now we're in git we don't need any cvsignore files any more...
Reviewed-on: http://gerrit.openafs.org/1
Verified-by: Derrick Brashear <shadow@gmail.com>
Reviewed-by: Derrick Brashear <shadow@gmail.com>
Revise our git ignores to match the current state of the tree, and include
entires in the top level for all of the 'dest' directories for all of the
architectures we claim to support.
Reviewed-on: http://gerrit.openafs.org/2
Reviewed-by: Derrick Brashear <shadow@gmail.com>
Verified-by: Simon Wilkinson <sxw@inf.ed.ac.uk>
LICENSE IPL10
FIXES 124709
curpag needs to know about kernel constructs (getpagvalue on AIX, onegroup
versus two group on linux) and on aix 5.1 simply can't work. add a new pioctl
and use it to simply ask the kernel what the current pag is
LICENSE BSD
FIXES 124889
Updates to chapter one of the Admin Guide. Remove references to the
Authentication Server, add references to a Kerberos server, revise ntpd
parts to reflect the fact that OpenAFS doesn't ship ntpd, and removed
the distinction between the US and non-US versions of the Update Server.
LICENSE IPL10
FIXES 124880
rxi_Findcbi, rxi_FIndIfnet, rxi_FindIfMTU "failure" end up returning
the RX_REMOTE_PACKET_SIZE as the mtu to use unless we allow our override
to apply, so we do that. then, add an afsd switch to allow setting it.
afsd man page update required and will follow.
====================
This delta was composed from multiple commits as part of the CVS->Git migration.
The checkin message with each commit was inconsistent.
The following are the additional commit messages.
====================
LICENSE IPL10
FIXES 124880
man page update to document previous work
LICENSE MIT
Replace version info in the DocBook files with a new ENTITY "version"
associated with a local "version.xml" file which contain a <revision>
tag for the current release.
The version.xml file should be autogenerated by the Makefile system.
