openafs/doc/man-pages/pod8/fragments/fileserver-options.pod

=over 4

=item B<-auditlog> <I<log path>>

Turns on audit logging, and sets the path for the audit log.  The audit
log records information about RPC calls, including the name of the RPC
call, the host that submitted the call, the authenticated entity (user)
that issued the call, the parameters for the call, and if the call
succeeded or failed.

=item B<-audit-interface> (file | sysvmq)

Specifies what audit interface to use. The C<file> interface writes audit
messages to the file passed to B<-auditlog>. The C<sysvmq> interface
writes audit messages to a SYSV message (see L<msgget(2)> and
L<msgrcv(2)>). The message queue the C<sysvmq> interface writes to has the
key C<ftok(path, 1)>, where C<path> is the path specified in the
B<-auditlog> option.

Defaults to C<file>.

=item B<-d> <I<debug level>>

Sets the detail level for the debugging trace written to the
F</usr/afs/logs/FileLog> file. Provide one of the following values, each
of which produces an increasingly detailed trace: C<0>, C<1>, C<5>, C<25>,
and C<125>. The default value of C<0> produces only a few messages.

=item B<-p> <I<number of processes>>

Sets the number of threads (or LWPs) to run. Provide a positive integer. 
The File Server creates and uses five threads for special purposes, 
in addition to the number specified (but if this argument specifies 
the maximum possible number, the File Server automatically uses five 
of the threads for its own purposes).

The maximum number of threads can differ in each release of OpenAFS.
Consult the I<OpenAFS Release Notes> for the current release.

=item B<-spare> <I<number of spare blocks>>

Specifies the number of additional kilobytes an application can store in a
volume after the quota is exceeded. Provide a positive integer; a value of
C<0> prevents the volume from ever exceeding its quota. Do not combine
this argument with the B<-pctspare> argument.

=item B<-pctspare> <I<percentage spare>>

Specifies the amount by which the File Server allows a volume to exceed
its quota, as a percentage of the quota. Provide an integer between C<0>
and C<99>. A value of C<0> prevents the volume from ever exceeding its
quota. Do not combine this argument with the B<-spare> argument.

=item B<-b> <I<buffers>>

Sets the number of directory buffers. Provide a positive integer.

=item B<-l> <I<large vnodes>>

Sets the number of large vnodes available in memory for caching directory
elements. Provide a positive integer.

=item B<-s> <I<small nodes>>

Sets the number of small vnodes available in memory for caching file
elements. Provide a positive integer.

=item B<-vc> <I<volume cachesize>>

Sets the number of volumes the File Server can cache in memory.  Provide a
positive integer.

=item B<-w> <I<call back wait interval>>

Sets the interval at which the daemon spawned by the File Server performs
its maintenance tasks. Do not use this argument; changing the default
value can cause unpredictable behavior.

=item B<-cb> <I<number of callbacks>>

Sets the number of callbacks the File Server can track. Provide a positive
integer.

=item B<-banner>

Prints the following banner to F</dev/console> about every 10 minutes.

   File Server is running at I<time>.

=item B<-novbc>

Prevents the File Server from breaking the callbacks that Cache Managers
hold on a volume that the File Server is reattaching after the volume was
offline (as a result of the B<vos restore> command, for example). Use of
this flag is strongly discouraged.

=item B<-implicit> <I<admin mode bits>>

Defines the set of permissions granted by default to the
system:administrators group on the ACL of every directory in a volume
stored on the file server machine. Provide one or more of the standard
permission letters (C<rlidwka>) and auxiliary permission letters
(C<ABCDEFGH>), or one of the shorthand notations for groups of permissions
(C<all>, C<none>, C<read>, and C<write>). To review the meaning of the
permissions, see the B<fs setacl> reference page.

=item B<-readonly>

Don't allow writes to this fileserver.

=item B<-hr> <I<number of hours between refreshing the host cps>>

Specifies how often the File Server refreshes its knowledge of the
machines that belong to protection groups (refreshes the host CPSs for
machines). The File Server must update this information to enable users
from machines recently added to protection groups to access data for which
those machines now have the necessary ACL permissions.

=item B<-busyat> <I<< redirect clients when queue > n >>>

Defines the number of incoming RPCs that can be waiting for a response
from the File Server before the File Server returns the error code
C<VBUSY> to the Cache Manager that sent the latest RPC. In response, the
Cache Manager retransmits the RPC after a delay. This argument prevents
the accumulation of so many waiting RPCs that the File Server can never
process them all. Provide a positive integer.  The default value is
C<600>.

=item B<-rxpck> <I<number of rx extra packets>>

Controls the number of Rx packets the File Server uses to store data for
incoming RPCs that it is currently handling, that are waiting for a
response, and for replies that are not yet complete. Provide a positive
integer.

=item B<-rxdbg>

Writes a trace of the File Server's operations on Rx packets to the file
F</usr/afs/logs/rx_dbg>.

=item B<-rxdbge>

Writes a trace of the File Server's operations on Rx events (such as
retransmissions) to the file F</usr/afs/logs/rx_dbg>.

=item B<-rxmaxmtu> <I<bytes>>

Defines the maximum size of an MTU.  The value must be between the
minimum and maximum packet data sizes for Rx.

=item B<-jumbo>

Allows the server to send and receive jumbograms. A jumbogram is
a large-size packet composed of 2 to 4 normal Rx data packets that share
the same header. The fileserver does not use jumbograms by default, as some
routers are not capable of properly breaking the jumbogram into smaller
packets and reassembling them.

=item B<-nojumbo>

Deprecated; jumbograms are disabled by default.

=item B<-rxbind>

Force the fileserver to only bind to one IP address.

=item B<-allow-dotted-principals>

By default, the RXKAD security layer will disallow access by Kerberos
principals with a dot in the first component of their name. This is to avoid
the confusion where principals user/admin and user.admin are both mapped to the
user.admin PTS entry. Sites whose Kerberos realms don't have these collisions 
between principal names may disable this check by starting the server
with this option.

=item B<-L>

Sets values for many arguments in a manner suitable for a large file
server machine. Combine this flag with any option except the B<-S> flag;
omit both flags to set values suitable for a medium-sized file server
machine.

=item B<-S>

Sets values for many arguments in a manner suitable for a small file
server machine. Combine this flag with any option except the B<-L> flag;
omit both flags to set values suitable for a medium-sized file server
machine.

=item B<-k> <I<stack size>>

Sets the LWP stack size in units of 1 kilobyte. Do not use this argument,
and in particular do not specify a value less than the default of C<24>.

=item B<-realm> <I<Kerberos realm name>>

Defines the Kerberos realm name for the File Server to use. If this
argument is not provided, it uses the realm name corresponding to the cell
listed in the local F</usr/afs/etc/ThisCell> file.

=item B<-udpsize> <I<size of socket buffer in bytes>>

Sets the size of the UDP buffer, which is 64 KB by default. Provide a
positive integer, preferably larger than the default.

=item B<-sendsize> <I<size of send buffer in bytes>>

Sets the size of the send buffer, which is 16384 bytes by default.

=item B<-abortthreshold> <I<abort threshold>>

Sets the abort threshold, which is triggered when an AFS client sends
a number of FetchStatus requests in a row and all of them fail due to
access control or some other error. When the abort threshold is
reached, the file server starts to slow down the responses to the
problem client in order to reduce the load on the file server.

The throttling behaviour can cause issues especially for some versions
of the Windows OpenAFS client. When using Windows Explorer to navigate
the AFS directory tree, directories with only "look" access for the
current user may load more slowly because of the throttling. This is
because the Windows OpenAFS client sends FetchStatus calls one at a
time instead of in bulk like the Unix Open AFS client.

Setting the threshold to 0 disables the throttling behavior. This
option is available in OpenAFS versions 1.4.1 and later.

=item B<-enable_peer_stats>

Activates the collection of Rx statistics and allocates memory for their
storage. For each connection with a specific UDP port on another machine,
a separate record is kept for each type of RPC (FetchFile, GetStatus, and
so on) sent or received. To display or otherwise access the records, use
the Rx Monitoring API.

=item B<-enable_process_stats>

Activates the collection of Rx statistics and allocates memory for their
storage. A separate record is kept for each type of RPC (FetchFile,
GetStatus, and so on) sent or received, aggregated over all connections to
other machines. To display or otherwise access the records, use the Rx
Monitoring API.

=item B<-syslog [<loglevel>]

Use syslog instead of the normal logging location for the fileserver
process.  If provided, log messages are at <loglevel> instead of the
default LOG_USER.

=item B<-mrafslogs>

Use MR-AFS (Multi-Resident) style logging.  This option is deprecated.

=item B<-saneacls>

Offer the SANEACLS capability for the fileserver.  This option is
currently unimplemented.

=item B<-help>

Prints the online help for this command. All other valid options are
ignored.

=item B<-vhandle-setaside> <I<fds reserved for non-cache io>>

Number of file handles set aside for I/O not in the cache. Defaults to 128.

=item B<-vhandle-max-cachesize> <I<max open files>>

Maximum number of available file handles.

=item B<-vhandle-initial-cachesize> <I<initial open file cache>>

Number of file handles set aside for I/O in the cache. Defaults to 128.

=item B<-vattachpar> <I<number of volume attach threads>>

The number of threads assigned to attach and detach volumes.  The default
is 1.  Warning: many of the I/O parallism features of Demand-Attach
Fileserver are turned off when the number of volume attach threads is only
1.

This option is only meaningful for a file server built with pthreads
support.

=item B<-m> <I<min percentage spare in partition>>

Specifies the percentage of each AFS server partition that the AIX version
of the File Server creates as a reserve. Specify an integer value between
C<0> and C<30>; the default is 8%. A value of C<0> means that the
partition can become completely full, which can have serious negative
consequences.  This option is not supported on platforms other than AIX.

=item B<-lock>

Prevents any portion of the fileserver binary from being paged (swapped)
out of memory on a file server machine running the IRIX operating system.
This option is not supported on platforms other than IRIX.